3-phase Filters FN 258 Book-style EMC/RFI Filter for Three-phase Inverters and Power Drive Systems n Industry standard EMC solution for Approvals three-phase PDS filtering n Slim space-saving book-style housing n Solid safety connector blocks or optional wire output connections UL / CSA: FN 258 up to 180A (ex. -180-07) n Excellent attenuation performance n HV versions for up to 690VAC n HVIT versions for IT distribution networks UL / CSA: HV and HVIT up to 600VAC n P/L versions with low leakage current Technical specifications Typical electrical schematic Maximum continuous operating voltage: 3x 480/277VAC (FN 258, FN 258L, FN 258P) 3x 690/400VAC (FN 258HV, FN 258HVIT) Operating frequency: dc to 60Hz Rated currents: 7 to 250A @ 50° (480V filters) 7 to 130A @ 50° (690V filters) High potential test voltage: P –> E 2650VDC for 2 sec (480V filters) P –> P 2100VDC for 2 sec (480V filters) P –> E 3100VDC for 2 sec (690V filters) P –> P 3000VDC for 2 sec (690V filters) Protection category: IP20 Overload capability: 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour Temperature range (operation and storage): -25°C to +100°C (25/100/21) Flammability corresponding to: UL 94V-2 or better Note: HVIT versions without discharge resistor to ground. Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 MTBF @ 50°C/400V (Mil-HB-217F): 220,000 hours Features and benefits Typical applications n FN 258 range of filters provides state-of- n FN 258HVIT filters up to 130A meet the n Three-phase variable speed drives and the-art EMI attenuation based on an special requirements for the application in power drive systems (PDS) innovative multi-stage filter topology. industrial 690VAC IT distribution n IT power distribution networks They help to ensure compliance with networks. (FN 258HVIT) Class A or even Class B limits. n FN 258L and FN 258P filters help to fulfill n Applications comprising energy conversion n The slim book-style shape allows a tough requirements in respect of leakage devices (inverters, converters) convenient and space-saving installation current limitation and provide an excellent n Process automation equipment next to inverters and motor drives. solution to overcome problems with n Three-phase power supplies and UPS n With 480VAC rating and filter modules nuisance tripping of sensitive earth n Applications with low-leakage current from 7 to 250A, FN 258 are ready for the leakage detectors. requirements (FN 258L and FN 258P) most diverse applications worldwide. n FN 258HV filters up to 130A are designed for 690VAC distribution networks. > Components > FN 258 Filter selection table Filter* Rated current Typical drive Leakage current*** Power loss Input Output Weight @ 50°C (40°C) power rating** @ 440VAC/50Hz @ 25°C/50Hz connections connections [A] [kW] [mA] [W] [kg] FN 258-7-.. 7 (7.7) 4 16.5 9 -29 -07 -29 1.0 FN 258-16-.. 16 (17.5) 7.5 18.3 20 -29 -07 -29 1.4 FN 258-30-.. 30 (33) 15 24.2 21 -33 -07 -33 1.7 FN 258-42-.. 42 (46) 22 25.8 30 -33 -07 -33 2.5 FN 258-55-.. 55 (60) 30 25.8 30 -34 -07 -34 2.9 FN 258-75-34 75 (82) 37 25.8 24 -34 -34 3.9 FN 258-100-35 100 (110) 55 25.8 51 -35 -35 5.5 FN 258-130-35 130 (143) 75 30.0 50 -35 -35 6.9 FN 258-180-.. 180 (197) 90 30.0 73 -40 -07 -40 11.0 FN 258-250-.. 250 (275) 132 30.0 79 -40 -07 -40 12.0 FN 258HV-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 FN 258HV-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 FN 258HV-30-33 30 (33) 22 19.0 21 -33 -33 1.8 FN 258HV-42-33 42 (46) 30 21.6 30 -33 -33 2.6 FN 258HV-55-34 55 (60) 45 21.6 30 -34 -34 3.0 FN 258HV-75-34 75 (82) 55 21.6 24 -34 -34 4.3 FN 258HV-100-35 100 (110) 90 21.6 51 -35 -35 5.6 FN 258HV-130-35 130 (143) 110 25.0 50 -35 -35 7.1 FN 258HVIT-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 FN 258HVIT-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 FN 258HVIT-30-33 30 (33) 22 19.0 21 -33 -33 1.8 FN 258HVIT-42-33 42 (46) 30 21.6 30 -33 -33 2.6 FN 258HVIT-55-34 55 (60) 45 21.6 30 -34 -34 3.0 FN 258HVIT-75-34 75 (82) 55 21.6 24 -34 -34 4.3 FN 258HVIT-100-35 100 (110) 90 21.6 51 -35 -35 5.6 FN 258HVIT-130-35 130 (143) 110 25.0 50 -35 -35 7.1 FN 258L-7-.. 7 (7.7) 4 0.8 9 -29 -07 -29 1.0 FN 258L-16-.. 16 (17.5) 7.5 0.8 20 -29 -07 -29 1.4 FN 258L-30-.. 30 (33) 15 0.8 21 -33 -07 -33 1.7 FN 258L-42-.. 42 (46) 22 0.7 30 -33 -07 -33 2.5 FN 258L-55-.. 55 (60) 30 0.7 30 -34 -07 -34 2.9 FN 258L-75-34 75 (82) 37 0.7 24 -34 -34 3.9 FN 258L-100-35 100 (110) 55 0.7 51 -35 -35 5.5 FN 258L-130-35 130 (143) 75 0.7 50 -35 -35 6.9 FN 258L-180-.. 180 (197) 90 0.7 73 -40 -07 -40 11.0 FN 258L-250-07 250 (275) 132 0.7 79 -40 -07 12.0 FN 258P-7-.. 7 (7.7) 4 3.3 9 -29 -07 -29 1.0 FN 258P-16-.. 16 (17.5) 7.5 3.3 20 -29 -07 -29 1.4 FN 258P-30-.. 30 (33) 15 3.3 21 -33 -07 -33 1.7 FN 258P-42-.. 42 (46) 22 3.5 30 -33 -07 -33 2.5 FN 258P-55-.. 55 (60) 30 3.5 30 -34 -07 -34 2.9 FN 258P-75-34 75 (82) 37 3.5 24 -34 -34 3.9 FN 258P-100-35 100 (110) 55 3.5 51 -35 -35 5.5 FN 258P-130-35 130 (143) 75 3.5 50 -35 -35 6.9 FN 258P-180-.. 180 (197) 90 3.5 73 -40 -07 -40 11.0 FN 258P-250-07 250 (275) 132 3.6 79 -40 -07 12.0 * To compile a complete part number, please replace the -.. with the required output connection style. ** Calculated at rated current, 440VAC (FN 258) / 690VAC (FN 258HV) and cos phi = 0.8. The exact value depends upon the efficiency of the drive, the motor and the entire application. *** Maximum leakage under normal operating conditions (FN 258 at 440V, FN 258HV at 690V). Note: if two phases are interrupted, worst case leakage could reach 5.7 times higher levels. Typical filter attenuation Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym 7 to 30A types 42 to 100A types 130A types 180 and 250A types Note: typical attenuation performance of FN 258 standard filters. The behavior of FN 258HV, FN 258HVIT, FN 258P and FN 258L may be slightly different. > Components > FN 258 Mechanical data 7 to 55A types (-07) 7 to 130A types (-29, -33, -34, -35) 180 and 250A types (-07) 180 and 250A types (-40) Dimensions 7A 16A 30A 42A 55A 75A 100A 130A 180A 250A A 255 305 335 329 329 329 379 439 438 478 B 50 55 60 70 80 80 90 110 110 110 C 126 142 150 185 185 220 220 240 240 240 D 225 275 305 300 300 300 350 400 400 440 E 240 290 320 314 314 314 364 414 413 453 F 25 30 35 45 55 55 65 80 80 80 G 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 H 1 1 1 1.5 1.5 1.5 1.5 3 4 4 I 10.9 10.9 25 25 39 39 45 45 51 51 J M5 M5 M5 M6 M6 M6 M10 M10 M10 M10 K 25 27.5 30 35 40 40 45 55 55 55 L 85 100 110 130 105 140 130 140 110 110 X* AWG 16 AWG 14 AWG 10 AWG 8 AWG 6 50mm² 70mm² Y* 300 ±10 300 ±10 400 ±10 500 ±10 500 ±10 500 ±10 500 ±10 Z* 9 9 9 12 12 15 15 * Filters with output wire connections (-07) only. All dimensions in mm; 1 inch = 25.4mm Tolerances according: ISO 2768-m / EN 22768-m Filter input/output connector cross sections -29 -33 -34 -35 -40 Solid wire 6mm² 16mm² 35mm² 50mm² 95mm² Flex wire 4mm² 10mm² 25mm² 50mm² 95mm² AWG type wire AWG 10 AWG 6 AWG 2 AWG 1/0 AWG 4/0 Recommended torque 0.6 - 0.8Nm 1.5 - 1.8Nm 4.0 - 4.5Nm 7 - 8Nm 17 - 20Nm Please visit www.schaffner.com to find more details on filter connectors. Your local partner: To find your local partner within Schaffner’s global network, please go to www.schaffner.com May 2011 Headquarters and Sales and application centers Switzerland To find your local partner within global innovation and Schaffner EMV AG Schaffner‘s global network, please go to development center China Nordstrasse 11 Schaffner EMC Ltd. Shanghai 4542 Luterbach www.schaffner.com Schaffner Group Building 11, Lane 1365 T +41 32 681 66 26 Nordstrasse 11 East Kangqiao Road F +41 32 681 66 41 May 2011 4542 Luterbach Shanghai 201319 sales@schaffner.ch Switzerland T +86 21 6813 9855 T +41 32 681 66 26 F +86 21 6813 9811 Singapore © 2011 Schaffner EMC. F +41 32 681 66 30 cschina@schaffner.com Schaffner EMC Pte Ltd. Specifications subject to change without info@schaffner.ch www.schaffner.com Blk 3015A Ubi Road 1 notice. All trademarks recognized. www.schaffner.com 05-09 Kampong Ubi Industrial Germany Estate Schaffner is an ISO-registered company. Schaffner Deutschland GmbH T +65 6377 3283 Schoemperlenstrasse 12B F +65 6377 3281 Its products are designed and manufac- 76185 Karlsruhe singaporesales@schaffner.com tured under the strict quality and environ- T +49 721 56910 mental requirements of the ISO 9001 and F +49 721 569110 Spain ISO 14001 standards. germanysales@schaffner.com Schaffner EMC España Calle Caléndula 93, This document has been carefully Finland Miniparc III, Edificio E Schaffner Oy El Soto de la Moraleja, checked. However, Schaffner does not Tynninkuja 7 Alcobendas assume any liability for errors or inac- 08700 Lohja 28109 Madrid curacies. T +358 19 35 72 71 T +34 618 176 133 F +358 19 32 66 10 spainsales@schaffner.com finlandsales@schaffner.com Taiwan France Schaffner EMV Ltd. Schaffner EMC S.A.S. 6th Floor, No 413 112, Quai de Bezons Rui Guang Road 95103 Argenteuil Neihu District T +33 1 34 34 30 60 Taipei City 114 F +33 1 39 47 02 28 T +886 2 87525050 francesales@schaffner.com F+886 2 87518086 taiwansales@schaffner.com Italy Schaffner EMC S.r.l. Thailand Via Galileo Galilei, 47 Schaffner EMC Co. Ltd. 20092 Cinisello Balsamo (MI) Northern Region Industrial Estate T +39 02 66 04 30 45/47 67 Moo 4 Tambon Ban Klang F +39 02 61 23 943 Amphur Muang P.O. Box 14 italysales@schaffner.com Lamphun 51000 T +66 53 58 11 04 Japan F +66 53 58 10 19 Schaffner EMC K.K. thailandsales@schaffner.com Mitsui-Seimei Sangenjaya Bldg. 7F 1-32-12, Kamiuma, Setagaya-ku UK Tokyo 154-0011 Schaffner Ltd. T +81 3 5712 3650 5 Ashville Way F +81 3 5712 3651 Molly Millars Lane japansales@schaffner.com Wokingham www.schaffner.jp Berkshire RG41 2PL T +44 118 9770070 Sweden F +44 118 9792969 Schaffner EMC AB uksales@schaffner.com Turebergstorg 1, 6 www.schaffner.uk.com 19147 Sollentuna T +46 8 5792 1121 / 22 USA F +46 8 92 96 90 Schaffner EMC Inc. swedensales@schaffner.com 52 Mayfield Avenue Edison, New Jersey 08837 T +1 732 225 9533 F +1 732 225 4789 usasales@schaffner.com www.schaffner.com/us