Ordering number : ENN6913 2SA2040/2SC5707 PNP / NPN Epitaxial Planar Silicon Transistors 2SA2040 / 2SC5707 High Current Switching Applications Applications Package Dimensions • DC-DC converter, relay drivers, lamp drivers, unit : mm motor drivers, strobes. 2045B [2SA2040 / 2SC5707] Features 6.5 2.3 5.0 0.5 • Adoption of FBET, MBIT process. 4 • Large current capacitance. • Low collector-to-emitter saturation voltage. • High-speed switching. • High allowable power dissipation. 0.85 0.7 1.2 0.6 0.5 1 : Base 1 23 2 : Collector 3 : Emitter 4 : Collector SANYO : TP 2.3 2.3 Package Dimensions unit : mm 2044B [2SA2040 / 2SC5707] 6.5 2.3 5.0 0.5 4 0.85 0.5 12 3 1 : Base 0.6 1.2 2 : Collector 0 to 0.2 3 : Emitter 4 : Collector 2.3 2.3 SANYO : TP-FA Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 30101 TS IM TA-3233 No.6913-1/5 0.8 5.5 1.5 0.8 5.5 1.5 2.5 7.0 1.6 7.5 7.0 1.2 2SA2040/2SC5707 Specifications Note*( ) : 2SA2040 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage V (--50)80 V CBO Collector-to-Emitter Voltage V (--50)80 V CES Collector-to-Emitter Voltage V (--)50 V CEO Emitter-to-Base Voltage V (--)6 V EBO Collector Current I (--)8 A C Collector Current (Pulse) I (--)11 A CP Base Current I (--)2 A B 1.0 W Collector Dissipation P C Tc=25°C15W Junction Temperature Tj 150 °C Storage Temperature Tstg −55 to +150 °C Electrical Characteristics at Ta=25°C Ratings Parameter Symbol Conditions Unit min typ max Collector Cutoff Current I V =(--)40V, I =0 (--)0.1 μA CBO CB E Emitter Cutoff Current I V =(--)4V, I =0 (--)0.1 μA EBO EB C DC Current Gain h V =(--)2V, I =(--)500mA 200 560 FE CE C Gain-Bandwidth Product f V =(--)10V, I =(--)500mA (290)330 MHz T CE C Output Capacitance Cob V =(--)10V, f=1MHz (50)28 pF CB I =(--)3.5A, I =(--)175mA (--230)160 (--390)240 mV C B Collector-to-Emitter Saturation Voltage V (sat) CE I =(--)2A, I =(--)40mA (--240)110 (--400)170 mV C B Base-to-Emitter Saturation Voltage V (sat) IC=(--)2A, IB=(--)40mA (--)0.83 (--)1.2 V BE Collector-to-Base Breakdown Voltage V I =(--)10μA, I =0 (--50)80 V (BR)CBO C E Collector-to-Emitter Breakdown Voltage V I =(--)100μA, R =∞ 80 V (BR)CES C BE Collector-to-Emitter Breakdown Voltage V I =(--)1mA, R =∞ (--)50 V (BR)CEO C BE Emitter-to-Base Breakdown Voltage V I =(--)10μA, I =0 (--)6 V (BR)EBO E C Turn-On Time t See specified test circuit. (40)30 ns on Storage Time t See specified test circuit. (225)420 ns stg Fall Time t See specified test circuit. 25 ns f Swicthing Time Test Circuit I PW=20μs B1 D.C.≤1% I B2 OUTPUT INPUT R B R V L R + + 50Ω 100μF 470μF V = --5V V =25V BE CC 20I = --20I = I =2.5A B1 B2 C For PNP, the polarity is reversed. No.6913-2/5 25°C Ta=75°C 2SA2040/2SC5707 I -- V I -- V C CE C CE --7 7 2SA2040 --90mA 90mA --80mA --6 6 --70mA --60mA --5 5 --4 4 --3 3 --10mA --2 2 --1 1 I =0 I =0 B 2SC5707 B 0 0 0 --0.4 --0.8 --1.2 --1.6 --2.0 0 0.4 0.8 1.2 1.6 2.0 Collector-to-Emitter Voltage, V -- V IT00206 Collector-to-Emitter Voltage, V -- V IT00207 CE CE I -- V I -- V C BE C BE --8 8 2SA2040 2SC5707 V = --2V V =2V CE --7 7 CE 6 --6 --5 5 --4 4 --3 3 --2 2 1 --1 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Base-to-Emitter Voltage, V -- V IT00208 Base-to-Emitter Voltage, V -- V IT00209 BE BE h -- I h -- I FE C FE C 1000 1000 2SA2040 2SC5707 7 7 V = --2V V =2V CE CE 5 5 Ta=75°C 3 3 25°C --25°C 2 2 --25°C 100 100 7 7 5 5 3 3 2 2 10 10 25 3 73257 253 7 25 3 73257 253 7 0.01 0.1 1.0 10 --0.01 --0.1 --1.0 --10 Collector Current, I -- A IT00210 Collector Current, I -- A IT00211 C C V (sat) -- I V (sat) -- I CE C CE C --1000 1000 2SA2040 2SC5707 7 7 5 5 I / I =20 I / I =20 C B C B 3 3 2 2 --100 100 7 7 5 5 3 3 2 2 --10 10 7 7 5 5 3 3 2 2 --1.0 1.0 23 5 7 2 3 5 7 2 3 5 7 23 5 7 23 5 7 23 5 7 --0.01 --0.1 --1.0 --10 0.01 0.1 1.0 10 IT00212 Collector Current, I -- A Collector Current, I -- A IT00214 C C No.6913-3/5 10mA --30mA --20mA 20mA 30mA 60mA --40mA 50mA 40mA 70mA 80mA --50mA --25°C Ta=75°C --25°C Ta=75°C 25°C --100mA 25°C 100mA Ta=75°C Ta=75°C --25°C 25°C 25°C --25°C Collector-to-Emitter Saturation Voltage, V (sat) -- mV DC Current Gain, h Collector Current, I -- A Collector Current, I -- A CE FE C C Collector-to-Emitter Saturation Voltage, V (sat) -- mV DC Current Gain, h Collector Current, I -- A Collector Current, I -- A CE FE C C 2SA2040/2SC5707 V (sat) -- I V (sat) -- I CE C CE C --10000 10000 7 2SA2040 2SC5707 7 5 5 I / I =50 I / I =50 C B C B 3 3 2 2 --1000 1000 7 7 5 5 3 3 2 2 --100 100 7 7 5 5 25°C 3 3 25°C 2 2 --10 10 23 5 7 23 5 7 2 3 5 7 23 5 7 2 3 5 7 2 3 5 7 --0.01 --0.1 --1.0 --10 0.01 0.1 1.0 10 Collector Current, I -- A IT00213 Collector Current, I -- A IT00215 C C V (sat) -- I V (sat) -- I BE C BE C --10000 10000 2SA2040 2SC5707 7 7 I / I =50 I / I =50 C B C B 5 5 3 3 2 2 --1000 1000 Ta= --25°C Ta= --25°C 7 7 5 5 75°C 75°C 25°C 25°C 3 3 2 2 100 --100 23 5 7 2 3 5 7 2 3 5 7 23 5 7 2 3 5 7 2 3 5 7 --0.01 --0.1 --1.0 --10 0.01 0.1 1.0 10 Collector Current, I -- A IT00216 Collector Current, I -- A IT00217 C C Cob -- V Cob -- V CB CB 5 5 2SA2040 2SC5707 3 3 f=1MHz f=1MHz 2 2 100 100 7 7 5 5 3 3 2 2 10 10 7 7 5 5 3 3 2 2 577 2352357 25 3 57 7 23 57 2 355 2 3 --0.1 --1.0 --10 0.1 1.0 10 Collector-to-Base Voltage, V -- V IT00218 Collector-to-Base Voltage, V -- V IT00219 CB CB f -- I f -- I T C T C 1000 1000 2SC5707 2SA2040 7 7 V =10V V = --10V CE CE 5 5 3 3 2 2 100 100 7 7 5 5 3 3 2 2 10 10 573257 232 57 357 573257 232 57 357 0.01 0.1 1.0 10 --0.01 --0.1 --1.0 --10 Collector Current, I -- A IT00220 Collector Current, I -- A IT00221 C C No.6913-4/5 --25°C Ta=75°C --25°C Ta=75°C Base-to-Emitter Collector-to-Emitter Saturation Voltage, V (sat) -- mV Saturation Voltage, V (sat) -- mV Gain-Bandwidth Product, f -- MHz Output Capacitance, Cob -- pF BE CE T Base-to-Emitter Collector-to-Emitter Gain-Bandwidth Product, f -- MHz Output Capacitance, Cob -- pF Saturation Voltage, V (sat) -- mV Saturation Voltage, V (sat) -- mV T BE CE 100μs No heat sink DC Operation (Tc=25°C) 1ms DC Operation (Ta=25°C) 500μs 2SA2040/2SC5707 A S O P -- Ta C 2 1.2 I =11A 100ms 10ms CP 2SA2040 / 2SC5707 10 7 I =8A 1.0 C 5 3 2 0.8 1.0 7 5 0.6 3 2 0.4 0.1 7 2SA2040 / 2SC5707 5 0.2 Tc=25°C 3 Single Puls 2 For PNP, the minus sign(--)is omitted 0.01 0 2537 2537 2537 06 20 400 80 100 120 140 160 0.1 1.0 10 100 IT02971 IT02972 Collector-to-Emitter Voltage, V -- V Ambient Temperature, Ta -- °C CE P -- Tc C 18 2SA2040 / 2SC5707 16 15 14 12 10 8 6 4 2 0 06 20 400 80 100 120 140 160 Case Temperature, Tc -- °C IT02973 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2001. Specifications and information herein are subject to change without notice. PS No.6913-5/5 Collector Dissipation, P -- W Collector Current, I -- A C C Collector Dissipation, P -- W C This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.