RTD ISA104
Specifications
CONNECTORS
Power supply (12-pin Molex). Serial port (includes DIL-to-DB9 adapter cable). Parallel port (includes DIL-to-DB25 adapter cable). Speaker port (includes speaker). Keyboard port (DIN 5). Reset pushbutton port (includes reset pushbutton). Backup battery port (includes battery). PC/104 bus (XT/AT). Four standard ISA slots (XT/AT).
GENERAL
Supports simultaneous use of PC/104 modules and standard ISA bus plug-in boards. 12-volt DC-to-DC converter for Flash EPROM programming. LEDs indicate status of power supply voltages.
PHYSICAL
Size: 165mm L x 220mm W x 15mm H (6.4"L x 8.65"W x 0.6"H). 4-layer PCB. Operating temperature: 0 to +75°C. Operating humidity: 5 to 95%. Storage temperature -40 to +85°C.
Features
- 4-layer PCB construction
- Allows simultaneous use of PC/104 modules and standard ISA bus plug-in boards
- DC-to-DC converter provides 12 Vdc for Flash EPROM programming
- Includes adapter cables for serial, parallel, and keyboard
- Includes speaker, reset pushbutton, and backup battery
- LEDs indicate status of power supply voltages
- Standard PC-AT power supply connector
Datasheet
Extracted Text
ISA104 Backplane Adapter PC/104 and Standard ISA Bus Development Platform Power Supply Connector Serial Port Connector Keyboard Connector Power Status LEDs Parallel Port Connector DC-DC Converter for Flash Programming Reset Button, Backup Battery, and Speaker Connector PC/104 XT/AT Bus Stacking Connectors Four XT/AT ISA Bus Slots ISA104 Backplane Adapter (Actual Size: 165 x 220 x 15 mm) The ISA104 Backplane Adapter provides a PC/104 Features: bus connector, ISA bus slots, and peripheral and power � � � Allows simultaneous use of PC/104 modules � � connectors on a baby-AT form factor unit for simplified and standard ISA bus plug-in boards system development and testing. � � � � � Standard PC-AT power supply connector � � � � � DC-to-DC converter provides 12 Vdc for Flash Direct plug connection to PC/104 modules is made EPROM programming through a standard PC/104 AT bus stackthrough connec- � � � � � Includes adapter cables for serial, parallel, and tor. Plug-in boards are connected through four (XT/AT) keyboard ISA bus slots. The ISA104’s additional on-board connec- � � � � � 4-layer PCB construction tors make this platform ideal for cost effective PC/104 system development and demonstration. Connectors are � � � � � Includes speaker, reset pushbutton, and backup provided for a standard desktop computer power supply, battery AT-style serial port, parallel port, speaker, keyboard, � � � � � LEDs indicate status of power supply voltages reset pushbutton, and backup battery. ® For technical information and data sheets, call: Real Time Devices USA, Inc. Phone: 1 (814) 234-8087 � � � � � Fax: 1 (814)234-5218 � � Web Site: www.rtdusa.com � � � E-mail: sales@rtdusa.com “Accessing the Analog World” ® ™ ISA104 Backplane Adapter Specifications SVGA and PCMCIA utilityModules GENERAL: The CM110 and CM112 Super VGA Controller � Supports simultaneous use of PC/104 modules and standard utilityModules support fixed and multi-frequency analog CRTs ISA bus plug-in boards and monochrome and color STN LCD, TFT LCD, EL and � 12-volt DC-to-DC converter for Flash EPROM programming Plasma panels. These modules feature simultaneous CRT and � � � LEDs indicate status of power supply voltages � � panel, high resolution (up to 2048 x 1024) display and up to 16 CONNECTORS: million colors. Both board have an adjustable panel bais supply. � Power supply (12-pin Molex) The CM112 adds floppy and IDE controllers. The CM105 PC- � Serial port (includes DIL-to-DB9 adapter cable) AT PC card (PCMCIA) utilityModule provides hardware for � Parallel port (includes DIL-to-DB25 adapter cable) types I, II, and III PC cards (PCMCIA) and comes with drivers � Speaker port (includes speaker) � Keyboard port (DIN 5) and utility software. � Reset pushbutton port (includes reset pushbutton) � Backup battery port (includes battery) � PC/104 bus (XT/AT) ® PC/104 dataModules � Four standard ISA slots (XT/AT) dataModules provide complete data acquisition and control PHYSICAL: solutions for portable and embedded applications. The table � Size: 165mm L x 220mm W x 15mm H (6.4"L x 8.65"W x 0.6"H) below summarizes the features of this product line. Call today � 4-layer PCB � Operating temperature: 0 to +75°C for a data sheet detailing these versatile PC/104 modules. � Operating humidity: 5 to 95% � Storage temperature -40 to +85°C dataM odule® Features Ordering Information PC /104 BU S WIDTH (BITS) 8 8 8 8 8 16 16 8 8 16 8 8/16 8 8 8 ISA104 Backplane Adapter PC/104 backplane with 4 ISA XT/AT slots ........ $298 Single-ended Analog Inputs 16 16 16 16 16 16 16 Differential Analog Inputs 8 8 8 8 8 8 Maximum Throughput (kHz) 40 V/F 100 200 100 500 100 Maximum R esolu tion (bits) 12 18 12 12 16 12 16 RTD PC/104 cpuModules™ In put Voltage R ange Options 3 4 3 3 3 3 1 Programmable G ain Optio ns 4 4 4 4 4 4 Resistor Configurable Gain √ Automatic Channel Scan √ √√√ √ Programmable Burst √ √√√ √ cpuModule™ Features Programmable Multiburst √√√ √ Channel-Gain Scan Memory √√√ √ High-Speed Sample Counter √√√ √ A/D Buffer Sample Size 1K 1K 1K 1K PC/104 Bus PC/104 XT PC/104 AT PC/104 AT PC/104 AT PC/104 AT DMA Data Transfer √ √√√ √ Data Marker/Fast Digital Input 4/9 0/9 3/9 0/9 Processor F8680 386SX 486SXLC2 486DX4 Am5x86 Total Digital I/O Lines 16 16 16 16 16 16 16 24 24 24 24 24 48 48 18 Max Clock Rate (MHz) 14.3 33 66 100 133 Bit Programmable I/O Lines 8 8 8 8 48 24 6 Programmable Clock � � ��� Advanced Digital Interrupt Mode 2 2 2 2 2 Internal Cache 8KB 16KB 16KB High Current Buffers √√√ √ √ √ √ √ Math Coprocessor � ��� In crementa l Encoder O ption 3 √√√ √ √ √ Power Management � Pull-up/Pull-down R esistors √ √ √ √√√ √√ √√√ √√ √√ DRAM (max) 2MB 4MB 4MB 8MB 8MB 16-bit Timer/Counte rs 3 6 3 666 6 5 33 33 Pacer C lock & External Trigger Flash BIOS � ��� √√ √√√ √ Direct opto-22 Compatibility √√ √√ 32-pin SSD Sockets 1 2 2 2 2 Analog Outputs 2 2 212 14 84 SSD Capacity (max) 1MB 2MB 2MB 2MB 2MB Resolu tion (bits) 12 12 12 16 12 16 12 12 12 SSD Devices Supported F-E F-E-S-N-D F-E-S-N-D F-E-S-N-D F-E-S-N-D Outp ut Voltage Range Options 4 3 3 1 3 1 4 4 4 SSD Software � � ��� Independent FIFO Buffers 1K RS-232 Ports 2 1 1 2 2 Simultaneous Update √√ √√ √ √ √ RS-232/422/485 Ports 1 1 4-20 mA Current Loop Source √√ √ RS-485 Ports 1 Single +5V Power Supply √ √ √ √√√ √√ √√√ √√ √√ Power Consumption (w atts) 0.6 2 1.4 2.3 2.3 2.3 2.3 1.7 2.4 2.5 0.9 0.4 1.2 1.2 1.2 Parallel Port � � ��� IDE Interface ��� Floppy Disk Controller ��� Real Time Devices USA, Inc. Video Controller � 200 Innovation Blvd. • P.O. Box 906 • State College, PA 16804 • USA Phone: 1 (814) 234-8087 • Fax: 1 (814) 234-5218 Keyboard Port XT AT AT AT AT Keypad Scanning � Real Time Devices Scandinavia Oy Watchdog Timer � � ��� Palovartijantie 13-17 • FIN-00750 Helsinki • Finland Real Time Clock � � ��� Phone: (358) 9 346-4538 • Fax: (358) 9 346-4539 Single +5V Supply � � ��� Power Consumption (typ) 1.6W 2.5W 4.0W 5.3W 6.2W RTD logo, “Accessing the Analog World”, and dataModule are registered trademarks; SuperXT, cpuModule & utilityModule are trademarks of Real Time Devices, Inc. MS-DOS is a registered trademark and Windows is a trademark of Microsoft NOTE: For SSD Devices, F = Flash EPROM, E = EPROM, S = SRAM, N = NOVRAM, D=Disk-On-Chip Corporation. AT is a registered trademark and PC/XT is a trademark of IBM Corporation. TCIC-2/N is a trademark of Databook Inc. PC/104 is a trademark of the PC/104 Consortium. FaxBack is a registered trademark of FaxBack, Inc., Beaverton, OR, USA. All rights reserved. Copyright © 1995 Real Time Devices, Inc. ® For technical information and data sheets, call: Phone: 1 (814) 234-8087 � � � � � Fax: 1 (814) 234-5218 Real Time Devices USA, Inc. Web Site: www.rtdusa.com � � � � � E-mail: sales@rtdusa.com ISA104-9707 Real Time Devices Scandinavia Oy CMF8680 CMi386SX33 CMi486SXLC66 CMV486DX100 CMV586DX133 Analog Output Digital I/O A/D Conversions Analog Input Power DM5210 DM5300 DM5406 DM5408 DM5416 DM6420 DM6430 DM5602 DM5604 DM6620 DM5804 DM5806 DM5810 DM5812 DM5814
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the ISA104 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods