Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 Model 580 Digital Process Indicators Series • Economical and Flexible • Accepts Thermocouple, RTD, Current, or Voltage Input • Front Panel Alarm Capability • Configures Easily Content Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 www.rosemount.com Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 This product data sheet discusses the features, MODEL 580T FEATURES ® benefits, and specifications of Rosemount Model The Model 580T supports 0.1° resolution for 580 digital process indicators. Two types of Model temperature measurements below 1000°, and for 580 process indicator are available: The pressure temperature measurements above 1000°, the Model indicating Model 580D, and the temperature 580T automatically switches to a 1° resolution. indicating Model 580T. For information about other It also supports seven thermocouple sensor types: Rosemount process indicators, see the Other J, K, T, E, R, S, and B, and two 100 Ω three-wire, Rosemount Digital Process Indicators section of Platinum RTDs, either 0.00385 or 0.00392α. Select this product data sheet. any one of these input types using a rotary switch Following the Rosemount Inc. philosophy of located behind the snap-off lens. A DIP switch economically tiered pressure and temperature located in the same area enables you to display product lines, we now offer an economical alternative either degrees Fahrenheit or Celsius. for control room digital process indication. The Model 580 series of digital process indicators are flexible, MODEL 580 OPTIONS user-configurable units. They offer a reliable and cost-effective solution to your digital process Model 580 process indicators are rack mountable indication needs, without compromising the onto standard 19-inch instrument racks, and support performance that is characteristic of other either an alarm setpoint or a multiple input option. To Rosemount process indicators. In addition, these order either option, refer to the ordering information units are always readily available for shipment. table. If not ordered originally with the indicator, either option can be installed easily in the field. MODEL 580D FEATURES Alarm Setpoint The Model 580D Process Indicator is a dc input Easily set a single or dual alarm at any point within indicator that combines flexible scaling with four-digit the display range with the Model 580 alarm option. resolution and high accuracy. This indicator accepts Digitally set the setpoints using the two buttons on either 0–20 mA or 0–10 mV full scale input. You can the front panel, and specify the high or low alarm scale these ranges, or any subset (4–20 mA, 1–5 V) selection by moving a jumper on the option card. If the of these ranges, and calibrate the indicator to display indicator is set to dual alarm, you must set each engineering units from the dc input. The Model 580D alarm independently. A front panel LED clearly can be scaled to any range between –999 to 9999 illuminates to indicate alarms. using two push buttons located behind the snap-off lens. These buttons also set zero (low), full-scale The alarm setpoint option card includes a Form C, (high), and the decimal point. In addition to flexible 0.5 A relay connection for external alarms or contact scaling, the microprocessor-based Model 580D elements. For normally open or normally closed provides excellent measurement stability, one digit operation, relay terminals are provided at the rear of the repeatability, and 0.02 percent accuracy. indicator. Another feature of the Model 580D is its ability to Multiple Inputs power transmitters directly through an optional, built-in dc power supply. When Option Code E is The multiple inputs option enables a Model 580 to specified, the Model 580D provides 24 V dc at 30 receive up to six commonly scaled inputs. A rotary mA. This power supply replaces more expensive switch on the front panel allows convenient selection external power supplies and is electrically floating, of the desired input type, and a removable terminal allowing it to be grounded anywhere. As shown in the strip promotes easy sensor wiring. In addition, both wiring diagrams on page 7, wiring the power supply voltage and current inputs are acceptable, however is easy because all connections (four-wire and they cannot be combined in a single unit. two-wire) are made to the removable rear terminal block. 2 Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 Rack Adaptor Plates For mounting Model 580 process indicators on standard 19-inch instrument racks, we provide optional adaptor plates. Four types of adaptors are available for mounting one to four indicators. OTHER ROSEMOUNT DIGITAL PROCESS INDICATORS In addition to the Model 580 process indicators, Rosemount Inc. offers the Model 751 Digital or Analog Process Indicator. Refer to the Model 751 product data sheet, document number 00813-0100-4378. FIGURE 1. Model 580 Process Indicators MODEL 580T 10-A MODEL 580T 10-M MODEL 580D 10-A INPUT TEMPERATURE INPUT INDICATOR WITH 6 WITH ALARM WITH ALARM CHANNEL INPUT 3 580--73a Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 Specifications MODEL 580D SPECIFICATIONS Performance Specifications Environmental Ranges Functional Specifications Operating Range Repeatability 40 to 110 °F (5 to 45 °C) ±1 count Storage Stability with Temperature –40 to 150 °F (–40 to 65 °C) Zero Humidity µ V/°C Less than or equal to 80% RH non-condensing Span Alarm Relay Contact Rating 0.01% rdg/°C 0.5 A @ 120 V ac (non-inductive load) Form C Stability with Time 10 counts/year maximum Power 115/230 V ac ±10%, 50/60 Hz, 400 Hz Noise Rejection Warranty NMRR One year 60 dB @ 50/60 Hz, ±0.1 Hz CMRR Physical Specifications 120 dB @ 50/60 Hz, ±0.1 Hz with 250 Ω unbalance Case Construction Overload Protection One piece black plastic Power Lead to Ground Dimensions 1,500 V dc or V ac rms See “Model 580 Dimensional Drawings” on page 6 Across Inputs, Voltage Weight Up to 250 V dc or V ac for one minute, V+ to V– 1 lb. (454 g) Current Up to 150 mA dc or mA ac for one minute, I+ to I– MODEL 580T SPECIFICATIONS Input Impedance Functional Specifications Voltage 1 MΩ Repeatability ±1 count Current 5 Ω Stability with Temperature Read Rate Zero 2 per second nominal 1 µ V/°C Display Span 0.01% rdg/°C 7-segment red/orange LED. 0.56 in. H (14.2) Thermocouple Reference Junction, Internal, Automatic 0.03 °C/°C, 40 to 110 °F (5 to 45 °C) Break Detection Upscale approximately 50 nA 4 Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 Stability with Time Display 1°/year 7-segment red/orange LED 0.56 in. H (14.2) Noise Rejection Performance Specifications NMRR Environmental Ranges 60 dB @ 50/60 Hz, ±0.1 Hz Operating range CMRR 40 to 110 °F (5 to 45 °C) 120 dB @ 50/60 Hz, ±0.1 Hz. with 250 Ω unbalance Storage Overload Protection –40 to 150 °F (–40 to 65 °C) Power Lead to Ground Humidity 1500 V dc or V ac rms Less than or equal to 80% RH non-condensing Across Inputs, Thermocouple Model, T/C Multi-input Option Accuracy Up to 250 V dc or V ac for one minute, V+ to V– Add ±0.5 °C/±1 °F to instrument accuracy specification RTD Alarm Relay Contact Rating Up to 62 V dc or V ac for one minute, V+ to V– 0.5 A @ 120 V ac (non-inductive load) Form C Input Impedance Power Thermocouple 115/230 V ac ±10%, 50/60 Hz, 400 Hz 20 MΩ, exclusive of break detect current effects Warranty RTD One year 16.9 kΩ, V+ input. 16.9 kΩ, I input Physical Specifications RTD Lead Wire Error at 150 µ A excitation current Case Construction 40 mΩ per ohm of equal resistance in V+ and V– leads One piece black plastic 1 Ω per ohm of unbalance in V+ and V– leads Dimensions Point Update Rate See “Model 580 Dimensional Drawings” on page 6 2 per second Nominal 1° readings Weight 1 lb. (454 g) 1 per second nominal 0.1° readings TABLE 1. dc Range (1) (1) INPUT RANGE DISPLAY RANGE ACCURACY 0–20 mA User scalable between –999 and 9999 0.02% rdg, ±1 count 0–10 mV User scalable between –999 and 9999 0.02% rdg, ±1 count (1) Maximum sensitivity: 200 µ V/count; 0/4 µ A/count. Minimum sensitivity: 1 count. TABLE 2. Thermocouple Ranges 1° RESOLUTION 1° RESOLUTION (1) SENSOR TYPE RANGE/DISPLAY ACCURACY (±) RANGE/DISPLAY ACCURACY (±) Iron-Constantan J –337 to 1403 °F 1°, +0.03% –99.9 to 999.9 °F 0.9° –205 to 762 °C 1°, +0.03% –99.9 to 761.8 °C 0.5° Chromel-Alumel K –331 to 2510 °F 1°, +0.03% –99.9 to 999.9 °F 0.9° –202 to 1377 °C 1°, +0.03% –99.9 to 999.9 °C 0.5° Copper-Constantan T –346 to 755 °F 1°, +0.03% –99.9 to 754.6 °F 0.9° –210 to 401 °C 1°, +0.03% –99.9 to 401.1 °C 0.5° Chromel-Constantan E –338 to 1835 °F 1°, +0.03% –99.9 to 999.9 °F 0.9° –205 to 1002 °C 1°, +0.03% –99.9 to 999.9 °C 0.5° 5 Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 TABLE 2. Thermocouple Ranges 1° RESOLUTION 1° RESOLUTION (1) SENSOR TYPE RANGE/DISPLAY ACCURACY (±) RANGE/DISPLAY ACCURACY (±) Platinum- Platinum 13%, Rhodium R 32 to 3216 °F 1°, +0.05% 0 to 1769 °C 1°, +0.05% Platinum- Platinum 10%, Rhodium S 32 to 3218 °F 1°, +0.05% 0 to 1770 °C 1°, +0.05% Platinum 30%, Rhodium- Platinum 6%, 601 to 3325 °F 1°, +0.05% Rhodium B 316 to 1829 °C 1°, +0.05% (1) Accuracy percentage is of reading, ±1 digit. TABLE 3. RTD Range 1° RESOLUTION 1° RESOLUTION (1) SENSOR TYPE RANGE/DISPLAY ACCURACY (±) RANGE/DISPLAY ACCURACY (±) Platinum 100 Ω –329 to 1585 °F 1°, +0.03% –99.9 to 999.9 °F 0.9° 3-wire α 0.00385 –200 to 863 °C 1°, +0.03% –99.9 to 862.6 °C 0.5° Platinum 100 Ω –332 to 1563 °F 1°, +0.03% –99.9 to 999.9 °F 0.9° 3-wire α 0.00392 –202 to 851 °C 1°, +0.03% –99.9 to 850.8 °C 0.5° (1) Accuracy percentage is of reading, ±1 digit. Dimensional Drawings Model 580 Dimensional Drawings 3.62 0.27 4.92 0.38 (7) (125) (95) (92) 1.69 (43) 1.77 (45) PANEL CUTOUT DIMENSIONS 5.63 ½ DIN STANDARD (143) SIDE DIMENSIONS 2 (51) (1) 0.94 1.89 (24) (48) 580 Series 3.72 3.44 (87) (94) 3.72 (94) FACE DIMENSIONS TOP DIMENSIONS NOTE Dimensions are in inches (millimeters). (1) Character height is 0.56 (14.2). 6 580-0090A, 0091A, 0093A, 0092A Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 Models 580D and 580T Wiring Diagrams 30 mA @ 24 V dc T/C ac Power Excitation V dc ac Power +V –V +– +– +– mA dc Neutral Neutral RTD (White) (White) Gnd Gnd (Green) (Green) Hot Hot (Black) (Black) MODEL 580D MODEL 580T 4- and 2-Wire Excitation Wiring Diagrams ac Power ac Power Jumper Line Gnd Neu Line Gnd Neu To +V –V – I + I + – From Transducer/Transmitter Voltage Current 30 mA @ Transducer/Transmitter Input Input 24 V dc Excitation – Power + Power Supply Supply 4-WIRE MODE 2-WIRE CURRENT LOOP MODE 7 580-0094A, 0095A 580-0086A, 0089A Product Data Sheet 00813-0100-4695, Rev BA January 2003 Model 580 Ordering Information Model Product Description 580 Digital Process Indicator Code Input D dc Input T Temperature Sensor Input Code Line Voltage 10 Set for 115 V ac 20 Set for 230 V ac Code Options A Single Alarm B Dual Alarm M Six Channel Selection E 30 mA @ 24 V dc Excitation (Model 580D only) Typical Model Number: 580 D 10 A Spare Parts List Part Number Description R580D-HBK1 Owner’s Manual R580T-HBK1 Owner’s Manual RKS1 19-in. Rack Mount Adapter RKS2 19-in. Rack Mount Adapter RKS3 19-in. Rack Mount Adapter RKS4 19-in. Rack Mount Adapter Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. PlantWeb is a registered trademark of one of the Emerson Process Management group of companies. All other marks are the property of their respective owners. Emerson Process Management Rosemount Inc. Fisher-Rosemount GmbH & Co. Fisher-Rosemount Singapore Pte Ltd. 8200 Market Boulevard Shipping Address: 1 Pandan Crescent Chanhassen, MN 55317 USA Argelsrieder Feld 3 Singapore 128461 T (U.S.) 1-800-999-9307 82234 Wessling Tel (65) 777-8211 T (International) (952) 906-8888 Germany Fax (65) 777-0947 F (952) 949-7001 Tel 49 (8153) 9390 AP.RMT-Specialist@emersonprocess.com Fax 49 (8153) 939172 www.rosemount.com ¢00813-0100-4695u¤ © 2003 Rosemount Inc. All rights reserved.