Specifications Adjacent channel power (ACP) Measurements adjacent channel power according to Bluetooth RF Test Specification The specifications below are based on the data sheet specifications of the Spec- trum Analyzer R&S FSP and have not been checked separately. Level range max. +20 dBm Specifications apply under the following conditions: Packet type DH1 15 minutes warmup time at ambient temperature, specified environmental con- Payload PRBS9 ditions met, calibration cycle adhered to and internal calibration performed. Data with tolerances denotes measurement uncertainties with a confidence level Synchronization none of 95%. Trigger external, free run Unless otherwise stated, specifications are quoted for an RF input level +30 dBm to –50 dBm within the Bluetooth band (ISM) 2400 MHz to 2483.5 MHz and default settings. Ordering information Output power Measurements average and peak power to Bluetooth RF Test Specifica- tion Order designation Type Order No. TM Level range +30 dBm to –50 dBm Application Firmware for Bluetooth Measure- R&S FS-K8 1157.2568.02 ments with R&S FSP and R&S FSU Level uncertainty <0.7 dB (s = 0.25 dB) Spectrum Analyzer 9 kHz to 3 GHz R&S FSP3 1093.4495.03 Packet type longest supported (DH1, DH3, DH5) Spectrum Analyzer 9 kHz to 7 GHz R&S FSP7 1093.4495.07 Payload PRBS9 Spectrum Analyzer 9 kHz to 13.6 GHz R&S FSP13 1093.4495.13 Synchronization RF burst or preamble Spectrum Analyzer 9 kHz to 30 GHz R&S FSP30 1093.4495.30 Trigger IF power, external, free run Spectrum Analyzer 9 kHz to 40 GHz R&S FSP40 1093.4495.40 Modulation characteristics Spectrum Analyzer 20 Hz to 3.6 GHz R&S FSU3 1129.9003.03 Measurements FM deviation according to Bluetooth RF Test Specification ∆f1max, ∆f2max, ∆f1avg, ∆f2avg and ∆f2avg/∆f1avg Spectrum Analyzer 20 Hz to 8 GHz R&S FSU8 1129.9003.08 Deviation range ±250 kHz Spectrum Analyzer 20 Hz to 26.5 GHz R&S FSU26 1129.9003.26 Deviation uncertainty <3 kHz (signal level >–25 dBm, 10 averages) Packet type longest supported (DH1, DH3, DH5) Payload 10101010 and 11110000, auto detect Synchronization preamble Trigger IF power, external, free run Initial carrier frequency tolerance (ICFT) Measurements ICFT to Bluetooth RF Test Specification Measurement range ±250 kHz Uncertainty <2 kHz + carrier frequency x reference error (signal level >–30 dBm) Packet type DH1 Payload PRBS9 Synchronization preamble Trigger IF power, external, free run Carrier frequency drift Measurements carrier frequency drift to Bluetooth RF Test Specification drift / packet and drift / 50 µs Measurement range ±250 kHz Uncertainty <2 kHz (signal level > –30 dBm) Certified Environmental System Certified Quality System Packet type all supported (DH1, DH3, DH5) ISO 14001 ISO 9001 Payload 10101010 REG. NO 1954 DQS REG. NO 1954 Synchronization preamble Trigger IF power, external, free run ROHDE&SCHWARZ GmbH & Co. KG ⋅ Mühldorfstraße 15 ⋅ 81671 München ⋅ Germany ⋅ P.O.B. 8014 69 ⋅ 81614 München ⋅ Germany ⋅ Telephone +49 89 4129-0 www.rohde-schwarz.com ⋅ Customer Support: Telephone +49 1805124242, Fax +49 89 4129-13777, E-mail: CustomerSupport@rohde-schwarz.com TM PD 0757.7730.21 ⋅ Application Firmware for Bluetooth Measurements R&S FS-K8 ⋅ Trade names are trademarks of the owners ⋅ Subject to change ⋅ Data without tolerances: typical values Printed in Germany 0802 (Bi as)