IINPUTS INPUTS INPUTS Stand Alone Annunciator Panel AN-3196B LED The AN-3196B is a self-contained Mount Annunciator 12-point annunciator that can alert personnel locally through both flashing 12 INPUTS • 12 Point, Fully Self-Contained LED's and external audible devices. Annunciator This annunciator is a low cost method of providing annunciator benefits to • CSA Approved, remote locations. Ordinary Locations • FM Approved, Ordinary and Division 2 Locations Annunciator Expansion Additional Points For Existing (AC horn only) The reflash output relays on the Annunciator Systems AN-3196B can be used to combine • Expands Existing Annunciators up to 12 new inputs to alarm a Through Two Reflash Outputs single full-size window of an existing annunciator. Reflash • Isolated Inputs can be used to add additional 12 INPUTS points to non-expandable • Fully Field Switch Programmable annunciators and when it is MAIN PANEL ANNUNCIATOR undesirable to reduce the • AC/DC Field Contact Voltage window size on an internally expandable annunciator. • Available in Panel Mount, Surface Mount or NEMA Enclosure • MODBUS Communications Remote Monitoring with Reflash Multiple Remote Units With Output Option The AN-3196B can provide detailed To Main Panel Annunciator alarm data to local personnel and reflash the alarms to a The AN-3196B is a self contained, CRITICAL REFLASH GROUP control room annunciator. The compact LED annunciator with reflashed data often provides reflash capability. It can be used as a NON-CRITICAL REFLASH GROUP sufficient general information stand-alone annunciator or to about alarms occurring at enhance or expand other remote locations for operators MAIN PANEL ANNUNCIATOR annunciators. to react properly, and detailed alarm data is available on the REMOTE This model offers dependable indica- ANNUNCIATOR #1 AN-3196B LED display if tion of alarms via red LEDs with required. Cost savings are adjacent descriptive legend plates. realized through the reduction Each unit comes complete with 12 in wiring and control room inputs, integral control push buttons, REMOTE ANNUNCIATOR #2 annunciator size. power supplies, output relays for reflash to another annunciator, and audible alarming capabilities. Multiple Remotes With Outputs To One Common Annunciator Window Multiple Remotes to One Common Window Multiple AN-3196Bs can be linked together by using a reflash output from one unit A A A OUTPUT TO as an input to another. B B B COMMON The last AN-3196B ANNUNCIATOR WINDOW can reflash the alarm data from all of the units to a single window in a control room annunciator. 2.37 P U O R G H AS FL E R AMETEK Alarm and Event Recording AN-3196B Dimensions & Connections TOP VIEW Panel Mount .62" (15.7mm) 3.48" 3.73" (88.4mm) (94.74mm) PANEL CUTOUT FRONT VIEW 5.87" 3.80" (149.1mm) 4.00" ±.03 (101.6mm) (96.5mm) 13.96" 13.12" (354.6mm) ±.12 (333.3mm) 12.95" (329mm) .50" SIDE VIEW (12.7mm) (TYP.) Surface Mount 0.75" (19.1mm) 4.00" 8.90" (101.6mm) (226.1mm) 9.00" (228.6mm) 15.88" (403.4mm) .125" R. TYP. (3.2mm) .343" TYP. (8.71mm) 4.40" .437" DIA. TYP. (111.8mm) (11.1mm) 2.40" 0.80" SIDE VIEW (60.9mm) (20.3mm) BACK VIEW 2.38 AN-3196B Dimensions & Connections NEMA 4/12 Enclosure .437" DIA., TYP. SECTION B-B (11.1mm) .62" 10.00" 3.00" TYP. (15.75mm) (254.0mm) (76.2mm) 11.75" (298.45mm) 1.25" B (31.75mm) 10.00" (254.0mm) TEST OPTIONAL RELAY 22.50" SIL (571.5mm) 21.25" 20.00" (539.8mm) (508.0mm) ACK RESET B .437" (254.0mm) OPTIONAL (2 PLS.) AUDIBLE DEVICE 16.00" (406.4mm) 2.39 AMETEK Alarm and Event Recording TB 2 TB 1 EXTERNAL FIELD CONTACT CONNECTIONS REMOTE PUSHBUTTONS INTERNALLY SUPPLIED FCV 1 1 SIL SILENCE FC 1 FC 2 2 2 ACK ACKNOWLEDGE FC V RES 3 RESET VA +24 VDC 4 PUSHBUTTON/AUDIBLE VOLTAGE 3 250 mA FC 3 4 FC 4 TEST 5 TEST FC V 6 VB CRIT CRITICAL 7 5 REFL REFLASH OUT FC 5 FC 6 OUT 8 6 * AUDIBLE FC V DEVICE NON-CRIT 9 VC NON-CRITICAL FOR 24 VDC REFLASH REFL 10 7 OUT FC 7 8 FC 8 OUT 11 FC V 12 VD AUD COM AUDIBLE OUT COMMON 13 9 CRIT AUD CRITICAL AUDIBLE OUT FC 9 FC 10 14 24V RETURN 10 FC V RBK/ RINGBACK/ 15 VE NON-CRIT NON-CRITICAL AUDIBLE L (+) PWR 16 POWER (+ FOR DC, L FOR AC) 11 FC 11 FC 12 12 N (–) PWR 17 POWER (– FOR DC, N FOR AC) FC V 18 VF BOTH AUDIBLES SHOWN TIED TOGETHER. NOTE: FIELD CONTACTS MAY BE ANY MAY BE EITHER/OR. COMBINATION OF NO OR NC. * FOR OTHER AUDIBLE DEVICES REF DWG 1072-030 TB 1 FIELD CONTACT CONNECTIONS EXTERNALLY SUPPLIED FCV CONNECTIONS TB 2 FC 1 FOR OPTIONAL AUTOMATIC 1 REFLASH (AR) OPERATION** 2 SIL 1 SILENCE FC 2 VA FC 3 ACK 2 3 3 4 4 +24 VDC PUSHBUTTON/AUDIBLE VOLTAGE FC 4 VB FC 5 5 12 AUD COM AUDIBLE OUT COMMON 6 CRIT AUD 13 CRITICAL AUDIBLE OUT FC 6 VC FC 7 7 RBK/ RINGBACK/ 15 NON-CRIT NON-CRITICAL AUDIBLE 8 FC 8 VD FC 9 9 10 FC 10 CUSTOMER WIRING VE FC 11 INTERNAL WIRING 11 12 FC 12 –+ RET NEUTRAL LINE ** Recommended configuration for remote AN-3196B reflash output to main NOTE: OTHER CONFIGURATIONS AVAILABLE. annunciator, where audible function in remote location is not required. This CONTACT FACTORY OR LOCAL REP FOR MORE hook-up is not compatible with audible device hook-up shown in above INFORMATION. diagram. 2.40 Sequence Selection: AN-3196B Specifications Chose from 9 available sequences by Input Signals: DIP switch selection. Only one se- NO or NC contacts, switch selectable quence can be selected at any given Output: time for all 12 alarm points. The 9 A. LED indicator per point available sequences are listed under B. Audible and Reflash Output Relay Ordering, Item 1 and are defined on Contacts rated at: Page 2.15. 5 amperes at 24 VDC or 120 VAC resistive 3 amperes at 120 VAC resistive Legend Plate C. Optional remote mounted audible Engraving Sizes devices D. 24 VDC @ .25 A available for Maximum # Maximum # of driving audible device Letter Size of lines characters per Line 1/8" (3.2mm) 3 22 Ambient Temperature Range: 5/32" (4mm) 3 18 32°F to 140°F (0°C to 60°C) 3/16"(4.8mm) 2 14 Relative Humidity: 1/4" (6.4mm) 1 11 Other sizes available upon request. 0% to 95% (non-condensing) Power Source and Requirements: A. 120 VAC: 120 VAC ± 10%, 50- 60Hz at 100 mA maximum AN-3196B Ordering B. 240 VAC: 240 VAC ± 10%, 50-60Hz The AN-3196B is supplied in the following versions, stocked and immediately at 50 mA maximum available from the factory. Individual model numbers are defined by the following fill- C. 125 VDC: 105 VDC to 140 VDC at in items: 100 mA maximum AN-3196B- 1 – 2 – 3 – 4 – 5 – 6 – 7 D 24 VDC: 20 VDC to 28 VDC at 400 mA maximum Sequence Prime Field Contact Audible Reflash Enclosure Communications Power Voltage Options E. 48 VDC: 44 VDC to 52 VDC at 250 mA maximum Item 1 Sequence Terminals: Chose from these available sequences: Item 4 Audible Options Screw Barrier type A FFAM2 *SNS Sonalert Steady Tone 12 AWG wire maximum F2M-1 A-4 Remote Mount M R12 *SNP Sonalert Pulsing Controls: F1A F2A Remote Mount Integral Test, Acknowledge, Silence F3A A4 HAC 120 VAC Remote Horn and Reset pushbuttons R HDC 24 VDC Remote Horn Field Contact Voltage: HDH 125 VDC Remote Horn A. Isolated, internally supplied 125 VDC Item 2 Prime Power NR Not Required or 24 VDC for 48 VDC, 125 VDC, F 24 VDC *Audible device not integrally mounted 120/240 VAC Prime Power E 48 VDC in NEMA 4/12 enclosure. B. Non-isolated, internally supplied C 125 VDC 24 VDC for 24 VDC prime power or B 120 VAC Item 5 Reflash Option 48 VDC for 48 VDC prime power A 240 VAC AR Automatic Reflash C. Isolated externally supplied 125 VDC, MR Manual Reflash (Standard) 48 VDC, 24 VDC, 120 VAC Item 3 Field Contact Voltage Enclosures: Internally Supplied Item 6 Enclosure General purpose standard panel or D 125 VDC PM Panel Mount surface mount enclosures. X 24 VDC SM Surface Mount T 48 VDC 4WM Wall mount, NEMA 4 Labeling: Customer Supplied SCM Series Contact Monitor Inputs Black lamacoid legend plates with D/C 125 VDC Isolated white lettering for each point, plus one X/C 24 VDC Isolated Item 7 Communications for unit identification (see engraving T/C 48 VDC Isolated Port 1 Serial Modbus information) Y/C 120 VAC Isolated Isolation: 1700 VDC Surge Withstand Capability (SWC): Test conforms to ANSI /IEEE C37.90.1- 1989 (oscillatory) and IEC 801-4 Level 2 Weight: 9 lbs. (4.09 kg) Panel Mount 53 lbs. (24 kg) in NEMA Enclosure 2.41