® Camera Link 2 mega-pixel Camera 2M Camera Link with preprocessing functions FV-L200B1 Handles a wide range of inspection uses, such as positioning prior to liquid 2 mega- Camera PoCL crystal glass processing, circuit board mounted device part checks and pixels Link mounting inspection, automotive component flaw detection, medicine tablet inspection, etc. High-speed frame rate of 2M:15 fps Ultra-compact 28 mm×28 mm CCD camera among the smallest in the industry Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface Camera contains automatic control functions for gain and shutter Various trigger modes (pulse width, edge preset trigger) as standard features Image processing with a lookup table possible in the camera M4 screw holes are located on four sides (top, bottom, left, right) Highly rigid case to increase mounting precision For the power supply, either PoCL or an external supply possible [Strobe signal output] enables user adjustment of exposure and the timing of light emission [Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1 There is a strobe signal output (LVCMOS level) function for light emission use. Trigger signal Before strobe Strobe With this function, it is possible for the user to adjust the camera exposure timing signal output setting (delay, time) and light emission timing (delay, time) in accordance with the trigger CCD exposure Electronic shutter input signal received by the camera. Trigger signal After strobe Strobe signal output setting CCD exposure Electronic shutter Strobe emission timing Strobe and exposure timing adjustment possible Dimensions and rear connector specifications FV-L200B1 Product specifications 14.5 22 Imager 1/1.8" interline UXGA monochrome progressive CCD Active picture elements UXGA class: 1620 (H) × 1236 (V) 3-M2 Depth 3.0 2-M4 Depth 4.0 Cell size 4.4 (H) × 4.4 (V) µm 47.3 40 Vertical frequency (Frame rate) 15.3164 Hz 14.5 22 B 28 10.5 Horizontal frequency 19.176 kHz A Pixel frequency 36.8181 MHz Minimum scene illumination 0.1 lux at F1.2 U1(C Mount Screw) 23 3-M2 Depth 3.0(Both Side) 14.5 22 2-M4 Depth 4.0(Both Side) Sync. System Internal Video output Digital 8 , 10 or 12 bit Raw Data (Base configuration) 4-M2 Depth 3.0 4-M4 Depth 4.0 Unit: mm Shutter speed OFF, 1/4 to 1/120,000 sec. (Variable at every H and clock) Camera Link connector 3M-made SDR equivalent A Gain 0 to 27 dB Note: If the frame grabber board does not support PoCL, please supply power (12 Vdc) from a power and input/output signal connector. Input voltage 12 Vdc ± 10% Power supply Input/output signal connector Hirose-made HR10A-7R-6PB equivalent B Consumption Less than 3.0 W Trigger signal input can be done in accordance with the camera setting. Optional connector RICOH FP-CN6PB is supported. Dimensions 28 (W) × 28 (H) × 40 (D) mm (excluding the connector) Lens mount C mount IN/ Voltage Pin No. Signal name OUT Low voltage High voltage 1 GND IN 0V Weight Approximately 43 g 2 TRIGGER IN IN 0 to +0.5V +2.5 to +5.0V Operational 3 N.C. -5 to 45 deg. C temperature Operational 4 N.C. environment Storage 5 STROBE SIGNAL OUT OUT 0V +3.3V -30 to 65 deg. C temperature 6 +12Vdc IN +12Vdc 05 4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | sales@avsupply.com | www.avsupply.com 28 20 20 20 13 12 12 12