RICOH FV-G200B1
Features
- Camera contains automatic control functions for gain and shutter
- Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V)
- High image quality with a CCD global shutter
- High-speed frame rate of 2M: 15 fps
- In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom) Highly rigid case to increase mounting precision
- Supports DC iris lens so also excellent for outdoor monitoring uses
- Supports updating of camera firmware via Ethernet
- Various scan modes (full, AOI) as standard features
- Various trigger modes (pulse width, edge preset trigger) as standard features
Datasheet
Extracted Text
® GigE Vision 2 mega-pixel Camera Preprocessing functions and 2M GigE Vision for FV-G200B1 a wide range of uses 2 mega- GigE pixels Vision Suitable for diverse inspection uses, including positioning before each process in screen printing, circuit board mounted device part checks, automotive component flaw detection, etc. Also excellent for outdoor monitoring uses. High-speed frame rate of 2M: 15 fps High image quality with a CCD global shutter Camera contains automatic control functions for gain and shutter Various scan modes (full, AOI) as standard features Various trigger modes (pulse width, edge preset trigger) as standard features Supports DC iris lens so also excellent for outdoor monitoring uses Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V) Supports updating of camera firmware via Ethernet In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom) Highly rigid case to increase mounting precision [AOI* scan mode] raises inspection quality and speed with efficient scanning [Supported cameras] FV-G200B1, FV-G030B1 Image sensor image data AOI scan mode handles high-speed inspection. The user can freely define the start line and width of the image data. By scanning images of only the necessary portions, it is possible to transfer only the areas needed. This, in turn, makes it possible to do speedy inspections by shortening the time required for reading and transferring data. Area of Interest * 2. Eliminate additional unnecessary areas Transfer time reduced by sending only 1. Eliminate hatched areas areas necessary for inspection Dimensions and rear connector specifications FV-G200B1 Product specifications ±0.05 15.5 Imager 1/1.8" interline UXGA monochrome progressive CCD ±0.05 14.5 30.2 4-M4 Depth 4 Active picture elements UXGA class : 1624 (H) × 1236 (V) Cell size 4.4 (H) × 4.4 (V) µm Vertical frequency (Frame rate) 15.31668 Hz 1/4”20UNC(Screw for Tripod) Horizontal frequency 19.1761 kHz (55.3) Pixel frequency 36.818175 MHz 50.8 35 10.5 4-R3 B Minimum scene illumination 0.16 lux at F1.2 0 φ36−0.05 Sync. System Internal A Video output Digital 8, 10 or 12 bit Raw data GigE Vision Preset free-run mode: 10 μ seconds to 16,777,216 μ seconds C U1(C Mount Screw) Exposure time Preset trigger mode: 10 μ seconds to 16,777,216 μ seconds Pulse width mode: 10 μ seconds to Unlimited Gain 0 to 20.4 dB Unit: mm Gamma 1.0 C Input voltage + 10.8 to + 26.4 Vdc RJ45 connector Note: Not PoE type. Power provided separately from . A Power Consumption Less than 5.0 W DC iris lens connector M1951(EMUDEN-made) equivalent B Note: For details, see product specifications. Dimensions 35 (W) × 35 (H) × 50.8 (D) mm (excluding the connector) Input/output signal connector Hirose-made HR10A-7R-6PB equivalent C Lens mount C mount Power input and input/output signal input can be done. Optional connector RICOH FP-CN6PB is supported. Weight Approximately 120 g Operational Environmental temperature -5 deg.C temperature(Min) Pin No. Signal name IN/OUT Signals Initial output signal 1 GND IN GND Environmental temperature 35 deg. C or camera housing temperature (Top plate): 65 deg. C Note: Please use the unit under conditions that satisfy at least one of the above criteria. 2 I/O-1 OUT +3.3V LVTTL Frame Trigger Wait Operational In cases where the ambient temperature exceeds the above limit, when installing the unit environment 3 I/O-2 OUT +3.3V LVTTL Exposure Active Storage please take suitable heat dissipation measures so that the upper portion of the case stays temperature(Max) at a temperature of 65˚C or less. Inside this unit, between the case and the electronic 4 TRIGGER_In- IN Isolated - components we have taken thermal resistance measures of as small a size as possible. As a result, by controlling the case temperature, it is possible to keep the camera’s internal 5 TRIGGER_In+ IN Isolated + electronic components within the rated level. 6 POWER IN IN +10.8 to +26.4 Vdc 07 4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | sales@avsupply.com | www.avsupply.com 35 ±0.05 25 ±0.05 φ31 16.8
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the FV-G200B1 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods