® GigE Vision VGA Camera Preprocessing functions and VGA GigE Vision for FV-G030B1 a wide range of uses 300,000 GigE pixels Vision Handles a wide range of inspections, including monochrome image measurement, defect checking, etc. Suitable for applications involving installation in various types of devices that make up a machine vision system. High-speed frame rate of VGA: 90 fps High image quality with a CCD global shutter Various scan modes (full, AOI) as standard features Various trigger modes (pulse width, edge preset trigger) as standard features Supports DC iris lens so also excellent for outdoor monitoring uses Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V) Supports updating of camera firmware via Ethernet In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom) Highly rigid case to increase mounting precision [Preprocessing functions] reduce PC processing burden and increase image processing performance [Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1 Camera with preprocessing functions Standard camera On models with preprocessing functions, the camera itself has the various image PC PC processing functions shown below. Compared to cameras where there is an Lens Lens Camera Camera intervening board, it is possible to reduce the personal computer CPU burden and increase the transfer speed. • [Lookup table] enables finely detailed image creation See page 6 Some image All image processing • [AGC (auto gain control)] enables automatic gain adjustment in camera processing done by Low CPU burden High CPU burden done by PC camera • [Auto electronic shutter control] automatically controls the shutter in response to changes in subject light intensity Dimensions and rear connector specifications FV-G030B1 Product specifications ±0.05 15.5 Imager 1/3" interline VGA monochrome progressive CCD ±0.05 14.5 30.2 4-M4 Depth 4 Active picture elements VGA class : 648 (H) × 494 (V) Cell size 7.4 (H) × 7.4 (V) µm Vertical frequency (Frame rate) 89.91172 Hz 1/4”20UNC(Screw for Tripod) Horizontal frequency 47.2028 kHz (55.3) 50.8 Pixel frequency 36.818175 MHz 10.5 35 4-R3 B 0 Minimum scene illumination 0.58 lux at F1.2 φ36−0.05 A Sync. System Internal Video output Digital 8, 10 or 12 bit Raw data GigE Vision Preset free-run mode: 10 μ seconds to 16,777,216 μ seconds C U1(C Mount Screw) Exposure time Preset trigger mode: 10 μ seconds to 16,777,216 μ seconds Pulse width mode: 10 μ seconds to Unlimited Gain 0 to 20.4 dB Unit: mm Gamma Gamma 1.0 (Factory default) or uploadable gamma table C Input voltage + 10.8 to + 26.4 Vdc RJ45 connector Note: Not PoE type. Power provided separately from . A Power Consumption Less than 5.0 W DC iris lens connector M1951(EMUDEN-made) equivalent B Note: For details, see product specifications. Dimensions 35 (W) × 35 (H) × 50.8(D) mm (excluding the connector) Input/output signal connector Hirose-made HR10A-7R-6PB equivalent C Lens mount C mount Power input and input/output signal input can be done. Optional connector RICOH FP-CN6PB is supported. Weight Approximately 120 g Operational Environmental temperature -5 deg.C Pin No. Signal name IN/OUT Signals Initial output signal temperature(Min) 1 GND IN GND Environmental temperature 35 deg. C or camera housing temperature (Top plate): 65 deg. C Note: Please use the unit under conditions that satisfy at least one of the above criteria. 2 I/O-1 OUT +3.3V LVTTL Frame Trigger Wait Operational In cases where the ambient temperature exceeds the above limit, when installing the unit 3 I/O-2 OUT +3.3V LVTTL Exposure Active environment Storage please take suitable heat dissipation measures so that the upper portion of the case stays temperature(Max) at a temperature of 65˚C or less. Inside this unit, between the case and the electronic 4 TRIGGER_In- IN Isolated - components we have taken thermal resistance measures of as small a size as possible. As a result, by controlling the case temperature, it is possible to keep the camera’s internal 5 TRIGGER_In+ IN Isolated + electronic components within the rated level. 6 POWER IN IN +10.8 to +26.4 Vdc 08 4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | sales@avsupply.com | www.avsupply.com 35 ±0.05 25 ±0.05 φ31 16.8