Display Products TECHNOLOGY INC. PLRT1 PanelLink Board A PanelLink™ receiver board designed specifically for the OEM market Features include: • DVI 1.0 Compliant Digital Receiver • Single Channel PanelLink™ Interface supports VGA through SXGA resolutions • Universal panel interface for single or dual pixel per clock, 18 bit or 24 bit bits per pixel • Switching power supply and regulators for both 5V and 3.3V panels • Universal Inverter interface adapts to all inverter types and interfaces • On-board Dynapro SC-4 Touch screen controller option The PLRT1 board drives an LCD flat panel using the new DFP or DVI digital computer video standards. This means lower cost and simpler integration for the OEM looking to use LCDs in their equipment. The PLRT1 board combined with a standard Molex digital cable and the Reach provided panel-specific cables provide a complete off-the-shelf solution. The PanelLink connection enables distances of up to 10 meters between the computer and the display.The PLRT1 includes an optional Dynapro resistive touchscreen con- troller for either 4 or 8 wire resistive touchscreens. Universal Backlight Inverter Interface DVI 1.0 PanelLink™ Interface • Jumpers support either positive or negative enable with • Compatible with popular DVI compatible graphics adjustable high level voltage cards from ATI, Appian, and Matrox, Nvidia • Brightness Vmax. and Vmin adjustable; PWM optional • Supports resolutions up to SXGA (1280x1024) at • Brightness control via DPMS, external control, 24 bits per pixel or software • Allows cable runs of up to 10 meter range from PC Simplified Cabling Efficient Power Operation • DF9 connectors support lightweight flat flex • 12V input powers board and panel’s inverter cabling to VGA and SVGA panels • Switching regulator to minimize power consumption • Modular connectors for scaling from single to dual and heat generation pixel, and from 18 to 24 bit per pixel • Panel power selectable 5V or 3.3V • Single cable connects to backlight inverter using Dynapro SC-4 Touch Controller on-board (option) the same high density connectors used by • Fourth generation Dynapro touch controller most inverters • Supports 4 or 8 wire panels • Reach provides cabling for all panel types • RS-232 interface • ESD protected touch input for reliability Board Specifications Board Size 6"W x 7"H / 15.24mmW x 17.78mm Operating Temperature 0° to 50°C Inverter Connector Molex 53261-0890 EDID / DDC2B Yes Power input 12VDC, supply current panel dependent; typically 1A for common SVGA panel including backlight Storage Temperature 0° to 50°C Panel Connectors DF9-31P, DF9-41P, DF13-30DP, DF13-20DP Power Management Windows DPMS compatible