Surface-mount PolySwitch Surface-mount Resettable Devices More than ten years ago, Raychem Circuit Protection intro- duced the SMD product family, and polymeric PTC devices quickly became the computer industry standard for keyboard, mouse, and disk drive protection. In 1995, Raychem Circuit Protection advanced the technol- ogy, reducing the size and cost of surface-mount resettable devices with the introduction of its miniSMD product series. The recent additions to the surface- mount family include the nanoSMD series, which reduces the size to a 3216mm (1206mils) foot print, one-third the size of the 4 popular miniSMD series. Benefits: Features: Applications: • Smaller size saves board space • Broadest range of resettable • Computer motherboards and cost devices available in the industry • Modems • Many product choices give • Current ratings from 0.05 to 3A • USB hub, ports and peripherals engineers more design flexibility • Voltage ratings from 6V computer • IEEE1394 ports • Compatible with high-volume and electronic applications to • Digital cameras electronics assembly 60V (600V Telecom) • Disk drives • Assists in meeting regulatory • Agency recognition: UL, CSA, • CD-ROMs requirements TÜV • Game machines • Higher voltage ratings allow use • Small footprint • Battery packs in new applications • Fast time-to-trip • Phones • Low resistance • Fax machines • Analog and digital line cards • Printers •PDAs Products in this section are grouped by: • Chargers Product Dimensions, Product Series, Hold Current Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 187 Selection Guide for Surface-mount Devices Step 1. Determine the circuit’s operating parameters. Fill in the following information about the circuit: Maximum ambient operating temperature Normal operating current Maximum operating voltage (i.e. miniSMDC014 is 60V max.) DC Maximum interrupt current Step 2. Select the PolySwitch device that will accommodate the circuit’s maximum ambient temperature and normal operating current. Look across the top of Table S2 to find the temperature that most closely matches the circuit’s maximum operating temperature. Look down that column to find the value equal to or greater than the circuit’s normal operating current. Now look to the far left of that row to find the part number for the PolySwitch surface-mount device that will best accommodate the circuit. Devices in this section are grouped by device 4 dimensions, so your operating-current requirement may be found in more then one grouping. The thermal derating curves located in Figure S1 are the normalized representations of the data in Table S2. Step 3. Compare the selected device’s maximum electrical rat- ings with the circuit’s maximum operating voltage and interrupt current. Look down the first column of Table S3 to find the part number you selected in Step 2. Look to the right in that row to find the device’s maximum operating voltage (V ) and maximum interrupt current MAX (I ). Ensure that V and I are greater than or equal to the circuit’s MAX MAX MAX maximum operating voltage and maximum interrupt current. 188 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Step 4. Determine time-to-trip. Time-to-trip is the amount of time it takes for a device to switch to a high-resistance state once a fault current has been applied across the device. Identifying the PolySwitch device’s time-to-trip is important in order to provide the desired protection capabilities. If the device you choose trips too fast, undesired or nuisance tripping will occur. If the device trips too slowly, the components being protected may be damaged before the device switches to a high-resistance state. Figures S11-S19 show the typical time-to-trip at 20°C for each of the PolySwitch devices. If the PolySwitch device’s time-to-trip is too fast or too slow for the circuit, go back to Step 2 and choose an alternate device. Step 5. Verify ambient operating conditions. Ensure that your application’s minimum and maximum ambient temperatures are within the operating temperature of -40°C to 85°C (-40°C to 125°C for SMDH160). Step 6. Verify the PolySwitch device dimensions. Using dimensions in Table S4, compare the dimensions of the 4 PolySwitch device you selected with the application’s space con- siderations. Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 189 Protection Application Selection Table for Surface-mount Devices The table below lists Polyswitch Specifications for the suggested Once a part has been selected, devices typically used in these device part numbers can be the user should evaluate and test applications. found in this section. each product for the intended application. PolySwitch Resettable Devices—Key Selection Criteria Overcurrent Fast Time-to-trip Protection Application Additional Comments Overvoltage Small Size Low Resistance (Temperature Protection) AC adapter input power use w/ Zener & triac SMD250 SMD250 SMD200 Battery pack protection nanoSMDC150 miniSMDC260 miniSMDE190 Charger protection nanoSMDM050 miniSMDM110/16 nanoSMDM075 CPU/IC protection nanoSMDM100 nanoSMDC150 nanoSMDM075 Data acquisition/sensor microSMD005 — microSMD005 DC input/output power ≤6V nanoSMDM075 nanoSMDC150 nanoSMDM050 ≤12V miniSMDC075 miniSMDM110/16 miniSMDC075 DDC nanoSMDM075 nanoSMDM100 nanoSMDM050 Device Bay system DB12, DB20 miniSMDC200 miniSMDC260 miniSMDC200 DB32 miniSMDC260 SMD300 miniSMDM200 Ethernet/Lan nanoSMDM050 miniSMDM110/16 nanoSMDM075 Fan microSMD035 microSMD050 microSMD035 IEEE 802.3af VOIP SMD050-2018 SMD050-2018 SMD050-2018 IEEE-1394 power provider SMD100/33 SMD185 SMD100/33 alt. power provider SMD185 SMD185 SMD150/33 self-powered SMD185 SMD185 SMD150/33 LCD inverter nanoSMDM050 miniSMDM110/16 nanoSMDM075 LCD screen power nanoSMDM050 nanoSMDM050 microSMD035 4 LNB (Low Noise Block) SMD075 SMD075 SMD050 Motor ≤6V nanoSMDM100 nanoSMDC150 microSMDM075 ≤13.2V miniSMDC075 miniSMDM110/16 miniSMDC075 PS/2 mouse/keyboard nanoSMDM075 nanoSMDM100 nanoSMDM050 Signal - data communication ≤6V nanoSMDM075 nanoSMDM075 nanoSMDM075 ≤13.2V miniSMDC050 miniSMDM075 miniSMDC020 ≤30V SMD030-2018 SMD075 SMD050 SCSI nanoSMDM100 nanoSMDC150 nanoSMDM075 Smart card reader microSMD010 microSMD035 microSMD005 Telecom - modem UL1950 OC TS600-170 TS250-130 TS600-170 OV TVB270SA or SC* TVB270SA or SC* TVB270SA or SC* ITU-T K.21 OC TS250, TSV250 TS250, TSV250-130 TS250-130-RB OV TVB270SA* TVB270SA* TVB270SA* Digital line OC miniSMDC014 miniSMDC014 miniSMDC014 OV TVB270SC* TVB270SC* TVB270SC* Telecom - PBX UL1950 OC TS600-170 TS600-200-RA TS600-170 OV TVB270SA or SC* TVB270SA or SC* TVB270SA or SC* ITU-T K.21 OC TS250, TSV250 TS250-130 TS250-130-RB OV TVB270SA* TVB270SA* TVB270SA* Subscriber OC miniSMDC014 miniSMDC014 miniSMDC014 Telecom - line card Telcordia OC TS600-200-RA-B-0.5 TS600-200-RA-B-0.5 TS600-200-RA-B-0.5 GR-1089 OV TVB270SC* TVB270SC* TVB270SC* ITU-T K.20 OC TS250, TSV250 TS250-130-RA TS250 OV TVB270SA* TVB270SA* TVB270SA* Intrabuilding protection Telcordia GR1089 TSL250-080 SMD030-2018 TSL250-080 Temperature sensor CPU nanoSMDM050 nanoSMDM075 nanoSMDM050 USB Individual Port nanoSMDM075 nanoSMDM100 nanoSMDM050 2 port ganged nanoSMDC150 miniSMDC150 miniSMDC125 3 port ganged miniSMDC200 miniSMDM200 miniSMDM200 *Refer to the SiBar thyristor product section for more information. This list is not exhaustive. Raychem Circuit Protection welcomes our customers’ input for additional application ideas for Polyswitch Resettable devices. 190 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S1. Product Series: Size, Current Rating, Voltage Rating/Typical Resistance for Surface-mount Devices TS250 nanoSMDC miniSMDC TSL250 nanoSMDM microSMD miniSMDM midSMD SMD SMD2 miniSMDE TSV250 TS600 Size mm (mils) 3216 (1206) 3225 (1210) 4532 (1812) 5050 (2018) 7555 (2920) 8763 (3425) 11550 (4420) * * Hold Current (A) —— — — — — —— — — 0.05 — 30V /25Ω —— — — — — — DC 0.08 — — — — — — — 80V/12.5Ω — 0.100 30V /12Ω —— — — — — — — DC 0.125 30V /— — — — — — — — — DC 0.13 — — — — — — — 60V/6.0-8.0Ω — 0.14 — — 60V /4.0Ω —— — — — — DC 0.160 30V /— — — — — — — — — DC 0.17 — — — — — — — — 60V/11.0Ω 0.18 — — — — — — — — — 0.20 24V /— — 30V /1.4Ω — — — — — 60V/8.5Ω DC DC 0.30 — — — 60V /1.4Ω 60V /3.0Ω —— — — DC DC 0.35 — 6V /0.81Ω —— — — — — — DC 0.50 6V /0.40Ω 13.2V /0.55Ω 24V /0.60Ω 57V /0.5Ω 60V /0.87Ω —— — — DC DC DC DC DC 0.75 6V /0.20Ω 6V /0.29Ω 13.2V /0.23Ω — 30V /0.67Ω —— — — DC DC DC DC 24V /0.20Ω DC 1.00 6V /0.15Ω — — 15V /0.25Ω 30V /0.30Ω —— — — DC DC DC 33V /0.27Ω DC 1.10 6V /— 6V /0.14Ω 6V /0.12Ω —— — — — — DC DC DC 8V /0.14Ω DC 16V /0.12Ω 4 DC 1.25 — — 6V /0.09Ω — 15V /0.16Ω —— — — DC DC 1.50 6V /0.08Ω 6V /0.07Ω 6V /0.07Ω 15V /0.13Ω — 15V /0.16Ω —— — DC DC DC DC DC 33V /0.15Ω DC 1.60 — — 8V /0.066Ω — — 16V /0.10Ω —— — DC DC 1.85 — — — — — 33V /0.12Ω —— — DC 1.90 — — — — — — 16V /0.065Ω—— DC 2.00 — — 6V /0.050Ω 6V /0.07Ω — 15V /0.09Ω —— — DC DC DC 8V /0.040Ω DC 2.50 — — — — — 15V /0.06Ω —— — DC 2.60 — — 6V /0.035Ω —6V /0.05Ω —— — — DC DC 6V /0.030Ω DC 3.00 — — — — 6V /0.033Ω —— — — DC *Refer to Telecommunications and Networking section for dimensions; voltage for these parts is RMS max. Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 191 Table S2-A. Thermal Derating for Surface-mount Devices [Hold Current (A) at Ambient Temperature (°C)] Maximum Ambient Temperature Part Number -40˚C -20˚C 0˚C 20˚C 25˚C 40˚C 50˚C 60˚C 70˚C 80˚C 85˚C 125˚C nanoSMDC Series Size 3216 mm/1206 mils nanoSMDC150 2.20 1.99 1.77 1.55 1.50 1.34 1.23 1.10 1.01 0.90 0.84 — Lead-free devices are listed in Table S2-B nanoSMDM Series Size 3216 mm/1206 mils † nanoSMDM012 0.19 0.17 0.15 0.13 0.125 0.11 0.10 0.09 0.08 0.07 0.07 — † nanoSMDM016 0.24 0.22 0.19 0.17 0.16 0.14 0.13 0.10 0.09 0.09 0.08 — † nanoSMDM050 0.76 0.68 0.59 0.52 0.50 0.44 0.40 0.35 0.32 0.28 0.26 — † nanoSMDM075 1.11 1.00 0.85 0.78 0.75 0.67 0.61 0.52 0.50 0.44 0.42 — † nanoSMDM100 1.49 1.34 1.15 1.04 1.00 0.89 0.81 0.70 0.66 0.58 0.55 — Lead-free devices are listed in Table S2-B microSMD Series Size 3225 mm/1210 mils microSMD005 0.08 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.02 — microSMD010 0.15 0.13 0.12 0.10 0.10 0.09 0.08 0.07 0.06 0.05 0.05 — microSMD035 0.51 0.46 0.40 0.35 0.34 0.30 0.27 0.24 0.22 0.19 0.18 — microSMD050 0.76 0.66 0.58 0.50 0.48 0.42 0.38 0.35 0.29 0.25 0.23 — microSMD075 1.10 0.97 0.86 0.75 0.72 0.64 0.58 0.55 0.47 0.42 0.39 — microSMD110 1.60 1.42 1.26 1.10 1.06 0.94 0.86 0.80 0.70 0.62 0.58 — microSMD150 2.30 2.02 1.76 1.50 1.43 1.24 1.11 1.00 0.85 0.72 0.65 — Lead-free devices are listed in Table S2-B 4 miniSMDC Series Size 4532 mm/1812 mils miniSMDC014 0.23 0.20 0.17 0.14 0.13 0.11 0.10 0.09 0.07 0.06 0.05 — miniSMDC020 0.30 0.27 0.23 0.20 0.19 0.17 0.15 0.13 0.12 0.10 0.09 — miniSMDC050 0.59 0.57 0.55 0.50 0.48 0.45 0.43 0.35 0.30 0.25 0.23 — miniSMDC075 1.10 0.99 0.87 0.75 0.72 0.63 0.57 0.49 0.45 0.39 0.35 — miniSMDC110 1.60 1.45 1.28 1.10 1.07 0.92 0.83 0.71 0.66 0.57 0.52 — miniSMDC125 2.00 1.69 1.47 1.25 1.17 1.03 0.92 0.90 0.69 0.58 0.53 — miniSMDC150 2.30 2.05 1.77 1.50 1.44 1.23 1.09 0.95 0.82 0.68 0.61 — miniSMDC200 2.60 2.44 2.22 2.00 1.96 1.78 1.67 1.50 1.45 1.34 1.29 — miniSMDC260 3.40 3.16 2.88 2.60 2.54 2.32 2.18 2.00 1.90 1.76 1.69 — Lead-free devices are listed in Table S2-B miniSMDM Series Size 4532 mm/1812 mils † miniSMDM075 1.11 1.00 0.81 0.78 0.75 0.67 0.61 0.49 0.47 0.45 0.42 — † miniSMDM075/24 1.11 1.00 0.85 0.78 0.75 0.67 0.61 0.52 0.50 0.44 0.42 — † miniSMDM110 1.58 1.43 1.20 1.14 1.10 0.98 0.92 0.77 0.73 0.70 0.66 — † miniSMDM110/16 1.61 1.46 1.25 1.14 1.10 0.98 0.90 0.78 0.74 0.66 0.62 — † miniSMDM150/24 2.11 1.92 1.70 1.50 1.45 1.29 1.18 1.00 0.97 0.87 0.81 — † miniSMDM160 2.32 2.10 1.80 1.66 1.60 1.43 1.32 1.14 1.10 0.99 0.93 — † miniSMDM200 2.88 2.61 2.25 2.07 2.00 1.80 1.66 1.45 1.39 1.26 1.19 — † miniSMDM260 3.70 3.36 2.90 2.68 2.60 2.35 2.18 1.90 1.84 1.67 1.59 — Lead-free devices are listed in Table S2-B miniSMDE Series Size 11550 mm/4420 mils miniSMDE190 3.16 2.74 2.20 1.90 1.74 1.48 1.27 1.10 0.80 0.50 0.35 — Lead-free devices are listed in Table S2-B 192 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S2-A. Thermal Derating for Surface-mount Devices [Hold Current (A) at Ambient Temperature (°C)] continued Maximum Ambient Temperature Part Number -40˚C -20˚C 0˚C 20˚C 25˚C 40˚C 50˚C 60˚C 70˚C 80˚C 85˚C 125˚C midSMD Size 5050 mm/2018 mils SMD030-2018 0.48 0.42 0.35 0.30 0.28 0.24 0.21 0.17 0.15 0.12 0.10 — SMD050-2018 0.86 0.77 0.70 0.55 0.53 0.48 0.43 0.38 0.36 0.29 0.26 — SMD100-2018 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD150-2018 2.21 1.97 1.70 1.50 1.43 1.26 1.15 1.00 0.91 0.79 0.73 — SMD200-2018 2.81 2.54 2.27 2.00 1.93 1.73 1.59 1.46 1.32 1.19 1.12 — Lead-free devices are listed in Table S2-B SMD Size 7555 mm/2920 mils SMD030 0.44 0.39 0.32 0.30 0.28 0.26 0.23 0.19 0.18 0.17 0.15 — SMD050 0.73 0.65 0.55 0.50 0.47 0.43 0.39 0.33 0.31 0.28 0.26 — SMD075 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 — SMD100 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD100/33 1.48 1.35 1.20 1.10 1.06 0.98 0.91 0.83 0.79 0.73 0.69 — SMD125 1.89 1.68 1.50 1.25 1.21 1.04 0.93 0.85 0.71 0.61 0.55 — SMD260 3.82 3.41 2.90 2.60 2.45 2.19 1.99 1.70 1.58 1.38 1.28 — SMD260-RB 3.82 3.41 2.90 2.60 2.45 2.19 1.99 1.70 1.58 1.38 1.28 — SMD300 4.13 3.75 3.30 3.00 2.87 2.62 2.43 2.25 2.00 1.87 1.78 — Lead-free devices are listed in Table S2-B SMD2 Size 8763 mm/3425 mils 4 SMD150 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 — SMD150/33 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 — SMDH160 2.15 1.96 1.78 1.60 1.55 1.42 1.33 1.24 1.15 1.05 1.01 0.64 SMD185 2.54 2.29 2.20 1.85 1.80 1.55 1.43 1.31 1.19 1.06 1.00 — SMD200 3.01 2.67 2.30 2.00 1.90 1.66 1.50 1.30 1.16 0.99 0.91 — SMD250 3.72 3.31 2.80 2.50 2.35 2.09 1.89 1.60 1.48 1.28 1.18 — Lead-free devices are listed in Table S2-B Telecom Surface-mount TSL250-080 0.124 0.110 0.095 0.080 0.077 0.066 0.059 0.051 0.044 0.037 0.033 — TS250-130 0.208 0.182 0.156 0.130 0.124 0.104 0.091 0.078 0.065 0.052 0.045 — TSV250-130 0.208 0.182 0.156 0.130 0.124 0.104 0.091 0.078 0.065 0.052 0.045 — TS600-170 0.264 0.230 0.200 0.170 0.163 0.140 0.125 0.109 0.094 0.077 0.070 — TS600-200-RA 0.310 0.275 0.238 0.200 0.193 0.165 0.147 0.128 0.110 0.091 0.083 — TSM600-250 0.400 0.350 0.300 0.250 0.241 0.198 0.170 0.141 0.117 0.097 0.083 — Table S2-B. Thermal Derating for Lead-free Surface-mount Devices [Hold Current (A) at Ambient Temperature (°C)] Maximum Ambient Temperature Part Number -40˚C -20˚C 0˚C 20˚C 25˚C 40˚C 50˚C 60˚C 70˚C 80˚C 85˚C 125˚C Lead-free nanoSMDC Series Size 3216 mm/1206 mils nanoSMDC020F 0.34 0.30 0.26 0.22 0.20 0.17 0.15 0.13 0.11 0.09 0.08 — nanoSMDC035F 0.58 0.51 0.44 0.38 0.35 0.31 0.28 0.24 0.21 0.18 0.16 — nanoSMDC050F/13.2 0.78 0.69 0.61 0.52 0.50 0.44 0.39 0.35 0.30 0.25 0.24 — nanoSMDC075F 1.15 1.04 0.92 0.78 0.75 0.69 0.63 0.58 0.51 0.46 0.43 — Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 193 194_Sec_04_187-216 7/30/04 12:02 PM Page 194 Table S2-B.Thermal Derating for Lead-free Surface-mount Devices [Hold Current (A) at Ambient Temperature (°C)] continued Maximum Ambient Temperature Part Number -40˚C -20˚C 0˚C 20˚C 25˚C 40˚C 50˚C 60˚C 70˚C 80˚C 85˚C 125˚C nanoSMDC110F 1.64 1.46 1.30 1.10 1.06 0.92 0.83 0.80 0.65 0.56 0.52 — nanoSMDC150F 2.20 1.99 1.77 1.55 1.50 1.34 1.23 1.10 1.01 0.90 0.84 — Lead-free nanoSMDM Series Size 3216 mm/1206 mils nanoSMDM012F 0.19 0.17 0.15 0.13 0.125 0.11 0.10 0.09 0.08 0.07 0.07 — nanoSMDM020F 0.30 0.27 0.24 0.21 0.20 0.18 0.16 0.14 0.12 0.11 0.10 — nanoSMDM050F 0.76 0.68 0.59 0.52 0.50 0.44 0.40 0.35 0.32 0.28 0.26 — nanoSMDM050F/13.2 0.76 0.68 0.59 0.52 0.50 0.44 0.40 0.35 0.32 0.28 0.26 — nanoSMDM075F 1.11 1.00 0.85 0.78 0.75 0.67 0.61 0.52 0.50 0.44 0.42 — nanoSMDM100F 1.49 1.34 1.15 1.04 1.00 0.89 0.81 0.70 0.66 0.58 0.55 — Lead-free microSMD Series Size 3225 mm/1210 mils microSMD005F 0.08 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.02 — microSMD010F 0.15 0.13 0.12 0.10 0.10 0.09 0.08 0.07 0.06 0.05 0.05 — microSMD035F 0.51 0.46 0.40 0.35 0.34 0.30 0.27 0.24 0.22 0.19 0.18 — microSMD050F 0.76 0.66 0.58 0.50 0.48 0.42 0.38 0.35 0.29 0.25 0.23 — microSMD075F 1.10 0.97 0.86 0.75 0.72 0.64 0.58 0.55 0.47 0.42 0.39 — microSMD110F 1.60 1.42 1.26 1.11 1.06 0.94 0.86 0.80 0.70 0.62 0.58 — microSMD150F 2.30 2.02 1.76 1.50 1.43 1.24 1.11 1.00 0.85 0.72 0.65 — Lead-free miniSMDC Series Size 4532 mm/1812 mils 4 miniSMDC014F 0.23 0.20 0.17 0.14 0.13 0.11 0.10 0.09 0.07 0.06 0.05 — miniSMDC020F 0.30 0.27 0.23 0.20 0.19 0.17 0.15 0.13 0.12 0.10 0.09 — miniSMDC050F 0.59 0.57 0.55 0.50 0.48 0.45 0.43 0.35 0.30 0.25 0.23 — miniSMDC075F 1.10 0.99 0.87 0.75 0.72 0.63 0.57 0.49 0.45 0.39 0.35 — miniSMDC110F 1.60 1.45 1.28 1.10 1.07 0.92 0.83 0.71 0.66 0.57 0.52 — miniSMDC110F/16 1.68 1.49 1.30 1.10 1.05 0.92 0.83 0.75 0.64 0.55 0.50 — miniSMDC125F 2.00 1.69 1.47 1.25 1.17 1.03 0.92 0.90 0.69 0.58 0.53 — miniSMDC125F/16 2.00 1.69 1.47 1.25 1.17 1.03 0.92 0.90 0.69 0.58 0.53 — miniSMDC150F 2.30 2.05 1.77 1.50 1.44 1.23 1.09 0.95 0.82 0.68 0.61 — miniSMDC160F 2.50 2.19 1.89 1.60 1.53 1.31 1.16 1.10 0.95 0.79 0.71 — miniSMDC200F 2.60 2.44 2.22 2.00 1.96 1.78 1.67 1.50 1.45 1.34 1.29 — miniSMDC260F 3.40 3.16 2.90 2.60 2.54 2.32 2.18 2.00 1.90 1.76 1.69 — miniSMDC260F/12 3.40 3.16 3.00 2.60 2.54 2.32 2.18 2.00 1.90 1.76 1.69 — Lead-free miniSMDM Series Size 4532 mm/1812 mils miniSMDM075F/24 1.11 1.00 0.85 0.78 0.75 0.67 0.61 0.52 0.50 0.44 0.42 — miniSMDM110F 1.58 1.43 1.20 1.14 1.10 0.98 0.92 0.77 0.73 0.70 0.66 — miniSMDM110F/16 1.61 1.46 1.25 1.14 1.10 0.98 0.90 0.78 0.74 0.66 0.62 — miniSMDM200F 2.88 2.61 2.25 2.07 2.00 1.80 1.66 1.45 1.39 1.26 1.19 — miniSMDM260F 3.70 3.36 2.90 2.68 2.60 2.35 2.18 1.90 1.84 1.67 1.59 — Lead-free SMD Series Size 5050 mm/2018 mils SMD030F-2018 0.18 0.42 0.35 0.30 0.28 0.24 0.21 0.17 0.15 0.12 0.10 — SMD100F-2018 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD150F-2018 2.21 1.97 1.70 1.50 1.43 1.26 1.15 1.00 0.91 0.79 0.73 — SMD200F-2018 2.81 2.54 2.27 2.00 1.93 1.73 1.59 1.46 1.32 1.19 1.12 — 194 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection 195_04RaychemTycoX 9/15/04 8:49 AM Page 195 Surface-mount Table S2-B.Thermal Derating for Lead-free Surface-mount Devices [Hold Current (A) at Ambient Temperature (°C)] continued Maximum Ambient Temperature Part Number -40˚C -20˚C 0˚C 20˚C 25˚C 40˚C 50˚C 60˚C 70˚C 80˚C 85˚C 125˚C Lead-free SMD Series Size 5050 mm/2018 mils SMD030F-2018 0.48 0.42 0.35 0.30 0.28 0.24 0.21 0.17 0.15 0.12 0.10 — SMD050F-2018 0.86 0.77 0.70 0.55 0.53 0.48 0.43 0.38 0.36 0.29 0.26 — SMD100F-2018 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD150F-2018 2.21 1.97 1.70 1.50 1.43 1.26 1.15 1.00 0.91 0.79 0.73 — SMD200F-2018 2.81 2.54 2.27 2.00 1.93 1.73 1.59 1.46 1.32 1.19 1.12 — Lead-free SMD Series Size 7555 mm/2920 mils SMD030F 0.44 0.39 0.32 0.30 0.28 0.26 0.23 0.19 0.18 0.17 0.15 — SMD050F 0.73 0.65 0.55 0.50 0.47 0.43 0.39 0.33 0.31 0.28 0.26 — SMD075F 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 — SMD075F/60 1.11 0.99 0.84 0.75 0.71 0.63 0.57 0.49 0.45 0.39 0.36 — SMD100F 1.59 1.43 1.20 1.10 1.03 0.94 0.85 0.72 0.69 0.61 0.57 — SMD100F/33 1.48 1.35 1.20 1.10 1.06 0.98 0.91 0.83 0.79 0.73 0.69 — SMD125F 1.89 1.68 1.50 1.25 1.21 1.04 0.93 0.85 0.71 0.61 0.55 — SMD260F 3.82 3.41 2.90 2.60 2.45 2.19 1.99 1.70 1.58 1.38 1.28 — SMD300F 4.13 3.75 3.30 3.00 2.87 2.62 2.43 2.25 2.00 1.87 1.78 — Lead-free SMD2 Series Size 8763 mm/3425 mils SMD150F 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 — SMD150F/33 2.30 2.04 1.80 1.50 1.45 1.23 1.10 0.99 0.83 0.70 0.63 — SMD185F 2.54 2.29 2.20 1.85 1.80 1.55 1.43 1.31 1.19 1.06 1.00 — 4 SMD200F 3.01 2.67 2.30 2.00 1.90 1.66 1.50 1.30 1.16 0.99 0.91 — SMD250F 3.72 3.31 2.80 2.50 2.35 2.09 1.89 1.60 1.48 1.28 1.18 — Thermal Derating Curves for Surface-mount Devices* A = nanoSMD/microSMD/miniSMD & SMD B = miniSMDE190 C = SMDH160 Figure S1. Thermal Derating Curve Figure S1. Thermal Derating Curve 200 180 B 160 A 140 C 120 100 80 C 60 A 40 B 20 0 – – – 60 40 20 0 20 40 60 80 100 Ambient Temperature (°C) *Refer to Telecom and Networking section for thermal derating of Telecom parts. Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 195 Percent of rated hold and trip current Table S3-A. Electrical Characteristics for Surface-mount Devices at 20°C Max. Time-to-Trip I I V I P R R R Figure for H T MAX MAX D TYP MIN TYP 1 MAX Part Number (A) (A) (V ) (A) (W) (A) (s) ΩΩ Ω Dimensions DC nanoSMDC Series Size 3216 mm / 1206 mils † nanoSMDC150 1.50 3.00 6 40 0.6 8.0 0.30 0.04 0.080 0.110 S3 Lead-free devices are listed in Table S3-B nanoSMDM Series Size 3216 mm / 1206 mils † nanoSMDM012 0.125 0.29 30 10 0.4 1.0 0.20 1.50 4.5 6.000 S2 † nanoSMDM016 0.16 0.37 30 10 0.4 1.0 0.30 1.20 3.5 4.500 S2 † nanoSMDM050 0.50 1.00 6 40 0.4 8.0 0.10 0.15 0.400 0.700 S2 † nanoSMDM075 0.75 1.50 6 40 0.4 8.0 0.20 0.10 0.200 0.290 S2 † nanoSMDM100 1.00 1.80 6 40 0.4 8.0 0.30 0.06 0.150 0.210 S2 Lead-free devices are listed in Table S3-B microSMD Series Size 3225 mm / 1210 mils microSMD005 0.05 0.15 30 10 0.6 0.25 1.5 3.60 25.00 50.000 S4 microSMD010 0.10 0.25 30 10 0.6 0.5 1.0 2.10 9.00 15.000 S3 microSMD035 0.35 0.75 6 40 0.6 8.0 0.2 0.32 0.81 1.300 S3 microSMD050 0.50 1.00 13.2 40 0.6 5.0 0.1 0.25 0.55 0.900 S3 microSMD075 0.75 1.50 6 40 0.6 8.0 0.1 0.11 0.29 0.400 S3 microSMD110 1.10 2.20 6 40 0.6 5.0 1.0 0.07 0.14 0.210 S3 microSMD150 1.50 3.00 6 40 0.6 5.0 5.0 0.04 0.07 0.110 S3 Lead-free devices are listed in Table S3-B miniSMDC Series Size 4532 mm / 1812 mils 4 miniSMDC014 0.14 0.34 60 10 0.6 1.5 0.15 1.500 4.000 6.000 S3 miniSMDC020 0.20 0.40 30 10 0.6 8.0 0.02 0.600 2.900 3.300 S3 miniSMDC050 0.50 1.00 24 40 0.6 8.0 0.15 0.150 0.600 1.000 S3 miniSMDC075 0.75 1.50 13.2 40 0.6 8.0 0.20 0.110 0.260 0.450 S3 miniSMDC110 1.10 2.20 8 40 0.6 8.0 0.30 0.040 0.120 0.210 S3 miniSMDC125 1.25 2.50 6 40 0.6 8.0 0.40 0.050 0.090 0.140 S3 miniSMDC150 1.50 3.00 6 40 0.6 8.0 0.50 0.040 0.070 0.110 S3 miniSMDC200 2.00 4.00 6 40 0.6 8.0 5.00 0.020 0.050 0.070 S3 miniSMDC260 2.60 5.00 6 40 0.6 8.0 7.00 0.015 0.035 0.047 S3 Lead-free devices are listed in Table S3-B miniSMDM Series Size 4532 mm / 1812 mils † miniSMDM075 0.75 1.50 13.2 40 0.5 8.0 0.20 0.100 0.230 0.290 S2 † miniSMDM075/24 0.75 1.50 24 40 0.6 8.0 0.30 0.090 0.200 0.290 S5 † miniSMDM110 1.10 2.00 8 40 0.5 8.0 0.30 0.060 0.140 0.180 S2 † miniSMDM110/16 1.10 1.95 16 40 0.6 8.0 0.50 0.060 0.120 0.180 S5 miniSMDM150/24 1.50 3.00 24 20 0.6 8.0 1.500.040 — 0.120 S5 † miniSMDM160 1.60 2.80 8 40 0.6 8.0 2.00 0.033 0.066 0.099 S5 † miniSMDM200 2.00 3.50 8 40 0.6 8.0 3.00 0.020 0.040 0.060 S5 † miniSMDM260 2.60 4.55 6 40 0.6 8.0 6.00 0.010 0.030 0.043 S5 Lead-free devices are listed in Table S3-B miniSMDE Series Size 11550 mm / 4420 mils miniSMDE190 1.90 3.80 16 100 1.4 10 2.0 0.024 0.065 0.08 S3 Lead-free devices are listed in Table S3-B †Electrical characteristics determined at 25°C. 196 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S3-A. Electrical Characteristics for Surface-mount Devices at 20°C continued Max. Time-to-Trip I I V I P R R R Figure for H T MAX MAX D TYP MIN TYP 1 MAX Part Number (A) (A) (V ) (A) (W) (A) (s) ΩΩ Ω Dimensions DC midSMD Size 5050 mm/2018 mils SMD030-2018 0.30 0.80 60 20 0.7 1.5 1.5 0.500 1.40 2.300 S6 SMD050-2018 0.55 1.20 57 10 1.0 2.5 5.0 0.200 — 1.000 S6 SMD100-2018 1.10 2.20 15 40 1.2 8.0 0.5 0.100 0.25 0.400 S6 SMD150-2018 1.50 3.00 15 40 1.4 8.0 1.0 0.070 0.13 0.180 S6 SMD200-2018 2.00 4.20 6 40 1.4 8.0 3.0 0.048 0.07 0.100 S6 SMD Size 7555 mm/2920 mils SMD030 0.30 0.60 60 10 1.5 1.5 3.0 1.200 3.00 4.800 S7 SMD050 0.50 1.00 60 10 1.5 2.5 4.0 0.350 0.87 1.400 S7 SMD075 0.75 1.50 30 40 1.5 8.0 0.3 0.350 0.67 1.000 S7 SMD100 1.10 2.20 30 40 1.5 8.0 0.5 0.120 0.30 0.480 S7 SMD100/33 1.10 2.20 33 40 1.5 8.0 0.5 0.120 0.27 0.410 S7 SMD125 1.25 2.50 15 40 1.5 8.0 2.0 0.070 0.16 0.250 S7 SMD260 2.60 5.20 6 40 1.5 8.0 20.0 0.025 0.05 0.075 S7 SMD260-RB 2.60 5.00 6 40 1.5 5.0 60.0 0.030 0.055 0.075 S7 SMD300 3.00 6.00 6 40 1.3 8.0 35.0 0.015 0.033 0.048 S7 Lead-free devices are listed in Table S3-B SMD2 Size 8763 mm/3425 mils SMD150 1.50 3.00 15 40 1.7 8.0 5.0 0.060 0.16 0.250 S7 SMD150/33 1.50 3.00 33 40 1.7 8.0 5.0 0.080 0.15 0.230 S7 4 SMDH160 1.60 3.20 16 70 2.1 8.0 15.0 0.050 0.10 0.150 S7 SMD185 1.80 3.60 33 40 1.2 8.0 5.0 0.065 0.12 0.165 S7 SMD200 2.00 4.00 15 40 1.7 8.0 12.0 0.050 0.09 0.125 S7 SMD250 2.50 5.00 15 40 1.7 8.0 25.0 0.035 0.06 0.085 S7 Lead-free devices are listed in Table S3-B Max. Time-to-Trip I I V I P R R R Figure for H T MAX MAX D TYP MIN TYP 1 MAX Part Number (A) (A) (V ) (A) (W) (A) (s) ΩΩ Ω Dimensions RMS Telecom Surface-mount TSL250-080 0.080 0.16 250 3.0 1.2 1.0 0.8 5.0 11.0 20.0 S7 0.130 0.26 250 3.0 1.1 1.0 0.9 6.5 12.0 20.0 S8 TS250-130 — — 650 1.1 — — — — — — — TSV250-130 0.130 0.26 250 3.0 1.5 1.0 2.0 4.0 7.0 12.0 S10 TS600-170 0.170 0.40 600 3.0 2.5 1.0 10.0 4.0 9.0 18.0 S9 TS600-200-RA 0.200 0.40 600 3.0 2.5 1.0 12.0 4.0 7.5 13.5 S9 TSM600-250 0.250 0.86 600 3.0 2.0 3.0 8.0 1.0 3.5 7.0 — Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 197 Table S3-B. Electrical Characteristics for Lead-free Surface-mount Devices at 20°C Max. Time-to-Trip I I V I P R R R Figure for H T MAX MAX D TYP MIN TYP 1 MAX Part Number (A) (A) (V ) (A) (W) (A) (s) ΩΩ Ω Dimensions DC Lead-free nanoSMDC Series Size 3216 mm/1206 mils † nanoSMDC020F 0.20 0.42 24 100 0.6 8.0 0.10 0.65 — 2.600 S3 † nanoSMDC035F 0.35 0.75 16 20 0.6 3.5 0.10 0.45 — 1.400 S3 † nanoSMDC050F/13.2 0.50 1.10 13.2 40 0.6 8.0 0.10 0.20 — 0.800 S3 † nanoSMDC075F 0.75 1.50 6 40 0.6 8.0 0.10 0.12 — 0.400 S3 nanoSMDC110F 1.10 2.20 6 40 0.6 8.0 0.10 0.07 — 0.200 S3 † nanoSMDC150F 1.50 3.00 6 40 0.6 8.0 0.30 0.04 0.080 0.110 S3 Lead-free nanoSMDM Series Size 3216 mm/1206 mils † nanoSMDM012F 0.125 0.29 30 10 0.4 1.0 0.20 1.50 4.5 6.000 S2 † nanoSMDM020F 0.20 0.46 24 10 0.4 1.0 0.60 0.65 — 2.600 S2 † nanoSMDM050F 0.50 1.00 6 40 0.4 8.0 0.10 0.15 0.400 0.700 S2 † nanoSMDM050F/13.2 0.50 1.00 13.2 40 0.4 8.0 0.10 0.15 0.400 0.700 S2 † nanoSMDM075F 0.75 1.50 6 40 0.4 8.0 0.20 0.10 0.200 0.290 S2 † nanoSMDM100F 1.00 1.80 6 40 0.4 8.0 0.30 0.06 0.150 0.210 S2 Lead-free microSMD Series Size 3225 mm/1210 mils microSMD005F 0.05 0.15 30 10 0.6 0.25 1.5 3.60 25.00 50.000 S4 microSMD010F 0.10 0.25 30 10 0.6 0.5 1.0 2.10 9.00 15.000 S3 microSMD035F 0.35 0.75 6 40 0.6 8.0 0.2 0.33 0.81 1.300 S3 microSMD050F 0.50 1.00 13.2 40 0.6 5.0 0.1 0.25 0.55 0.900 S3 microSMD075F 0.75 1.50 6 40 0.6 8.0 0.1 0.11 0.29 0.400 S3 4 microSMD110F 1.10 2.20 6 40 0.6 5.0 1.0 0.07 0.14 0.210 S3 microSMD150F 1.50 3.00 6 40 0.6 5.0 5.0 0.04 0.07 0.110 S3 Lead-free miniSMDC Series Size 4532 mm/1812 mils miniSMDC014F 0.14 0.34 60 10 0.6 1.5 0.15 1.500 4.000 6.000 S3 miniSMDC020F 0.20 0.40 30 10 0.6 8.0 0.02 0.600 2.900 3.300 S3 miniSMDC050F 0.50 1.00 24 100 0.6 8.0 0.15 0.150 0.600 1.000 S3 miniSMDC075F 0.75 1.50 13.2 100 0.6 8.0 0.20 0.110 0.260 0.450 S3 miniSMDC110F 1.10 2.20 8 100 0.6 8.0 0.30 0.040 0.120 0.210 S3 miniSMDC110F/16 1.10 2.20 16 100 0.3 8.0 0.30 0.060 — 0.180 S3 miniSMDC125F 1.25 2.50 6 100 0.6 8.0 0.40 0.050 0.090 0.140 S3 miniSMDC125F/16 1.25 2.50 16 100 0.6 8.0 0.40 0.050 0.090 0.140 S3 miniSMDC150F 1.50 3.00 6 100 0.6 8.0 0.50 0.040 0.070 0.110 S3 miniSMDC160F 1.60 3.20 6 100 0.6 8.0 1.00 0.030 0.078 0.100 S3 miniSMDC200F 2.00 4.00 6 100 0.6 8.0 5.00 0.020 0.050 0.070 S3 miniSMDC260F 2.60 5.00 6 100 0.6 8.0 7.00 0.015 0.035 0.047 S3 miniSMDC260F/12 2.60 5.00 12 100 0.6 8.0 5.00 0.015 0.035 0.047 S3 Lead-free miniSMDM Series Size 4532 mm/1812 mils † miniSMDM075F/24 0.75 1.50 24 40 0.6 8.0 0.30 0.090 0.200 0.290 S5 † miniSMDM110F 1.10 2.00 8 40 0.5 8.0 0.30 0.060 0.140 0.180 S2 † miniSMDM110F/16 1.10 1.95 16 40 0.6 8.0 0.50 0.060 0.120 0.180 S2 † miniSMDM200F 2.00 3.50 8 40 0.6 8.0 3.00 0.020 0.040 0.060 S5 † miniSMDM260F 2.60 4.55 6 40 0.6 8.0 6.00 0.010 0.030 0.043 S5 Lead-free midSMD Series Size 5050 mm/2018 mils SMD030F-2018 0.30 0.80 60 20 0.9 1.5 1.50 0.500 1.400 2.300 S6 SMD100F-2018 1.10 2.20 15 40 1.2 8.0 0.50 0.100 0.250 0.400 S6 †Electrical characteristics determined at 25°C. 198 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S3-B. Electrical Characteristics for Lead-free Surface-mount Devices at 20°C continued Max. Time-to-Trip I I V I P R R R Figure for H T MAX MAX D TYP MIN TYP 1 MAX Part Number (A) (A) (V ) (A) (W) (A) (s) ΩΩ Ω Dimensions DC SMD150F-2018 1.50 3.00 15 40 1.4 8.0 1.00 0.070 0.130 0.180 S6 SMD200F-2018 2.00 4.20 6 40 1.4 8.0 3.00 0.048 0.700 0.100 S6 Lead-free SMD Series Size 7555 mm/2920 mils SMD030F 0.30 0.60 60 10 1.5 1.5 3.0 1.200 3.00 4.800 S7 SMD050F 0.50 1.00 60 10 1.5 2.5 4.0 0.350 0.87 1.400 S7 SMD075F 0.75 1.50 30 40 1.5 8.0 0.3 0.350 0.67 1.000 S7 SMD075F/60 0.75 1.50 60 10 1.5 8.0 0.3 0.350 0.67 1.000 S7 SMD100F 1.10 2.20 30 40 1.5 8.0 0.5 0.120 0.30 0.480 S7 SMD100F/33 1.10 2.20 33 40 1.5 8.0 0.5 0.120 0.27 0.410 S7 SMD125F 1.25 2.50 15 40 1.5 8.0 2.0 0.070 0.16 0.250 S7 SMD260F 2.60 5.20 6 40 1.5 8.0 20.0 0.025 0.05 0.075 S7 SMD300F 3.00 5.00 6 40 1.3 8.0 35.0 0.015 0.033 0.048 S7 Lead-free SMD2 Devices Size 8763 mm/3425 mils SMD150F 1.50 3.00 15 40 1.7 8.0 5.0 0.060 0.16 0.250 S7 SMD150F/33 1.50 3.00 33 40 1.7 8.0 5.0 0.080 0.15 0.230 S7 SMD185F 1.80 3.60 33 40 1.2 8.0 5.0 0.065 0.12 0.165 S7 SMD200F 2.00 4.00 15 40 1.7 8.0 12.0 0.050 0.09 0.125 S7 SMD250F 2.50 5.00 15 40 1.7 8.0 25.0 0.035 0.06 0.085 S7 4 Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 199 Figures S2–S10. Physical Description for Dimensions for Surface-mount Devices Figure S2 Figure S3 A B B C DD C A D E Figure S4 Figure S5 A B B C DD C A D E Fi B1 Figure S6 Figure S7 C 4 C G F B B H D E D E F A A Figure S8 Figure S9 C C E F B B D D E A A Figure S10 A C B D E F 200 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S4-A. Dimensions for Surface-mount Devices in Millimeters (Inches) Dimension AB C D E F G H Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min Max. Min. Figure nanoSMDC Series Size 3216 mm/1206 mils 3.0 3.4 0.85 1.4 1.37 1.8 0.25 — 0.076 —— — — — — S3 nanoSMDC150 (0.118) (0.134) (0.033) (0.055) (0.054) (0.071) (0.010) — (0.003) —— — — — — Lead-free devices are listed in Table S4-B nanoSMDM Series Size 3216 mm/1206 mils nanoSMDM012 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM016 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM050 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM075 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM100 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — Lead-free devices are listed in Table S4-B microSMD Series Size 3225 mm/1210 mils microSMD005 3.00 3.43 0.50 0.85 2.35 2.80 0.25 — 0.20 —— — — — — S4 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD010 3.00 3.43 0.50 0.85 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD035 3.00 3.43 0.38 0.62 2.35 2.80 0.30 — 0.25 —— — — — — S3 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.012) — (0.010) —— — — — — microSMD050 3.00 3.43 0.38 0.62 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) — (0.008) —— — — — — 4 microSMD075 3.00 3.43 0.38 0.62 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD110 3.00 3.43 0.28 0.48 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD150 3.00 3.43 0.51 1.22 2.35 2.80 0.30 — 0.25 —— — — — — S3 (0.118) (0.135) (0.020) (0.048) (0.092) (0.110) (0.012) — (0.010) —— — — — — Lead-free devices are listed in Table S4-B miniSMDC Series Size 4532 mm/1812 mils miniSMDC014 4.37 4.73 0.635 0.89 3.07 3.41 0.30 — 0.20 —— — — — — S3 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.012) — (0.008) —— — — — — mniSMDC020 4.37 4.73 0.635 0.89 3.07 3.41 0.30 — 0.20 —— — — — — S3 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.012) — (0.008) —— — — — — miniSMDC050 4.37 4.73 0.38 0.62 3.07 3.41 0.30 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.012) — (0.008) —— — — — — miniSMDC075 4.37 4.73 0.38 0.62 3.07 3.41 0.30 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.012) — (0.008) —— — — — — miniSMDC110 4.37 4.73 0.38 0.62 3.07 3.41 0.30 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.012) — (0.008) —— — — — — miniSMDC125 4.37 4.73 0.28 0.48 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC150 4.37 4.73 0.28 0.48 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC200 4.37 4.73 0.51 1.22 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC260 4.37 4.73 0.76 1.25 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.030) (0.050) (0.121) (0.134) (0.010) — (0.008) —— — — — — Lead-free devices are listed in Table S4-B miniSMDM Series Size 4532 mm/1812 mils miniSMDM075 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S2 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM075/24 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — Lead-free devices are listed in Table S4-B Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 201 Table S4. Dimensions for Surface-mount Devices in Millimeters (Inches) continued Dimension AB C D E F G H Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min Max. Min. Figure miniSMDM Series Size 4532 mm/1812 mils continued miniSMDM110 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S2 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM110/16 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM150/24 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM160 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM200 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM260 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — Lead-free devices are listed in Table S4-B miniSMDE Series Size 11550 mm/4420 mils miniSMDE190 11.15 11.51 0.33 0.53 4.83 5.33 0.51 1.02 3.81 —— — — — — S3 (0.439) (0.453) (0.013) (0.021) (0.190) (0.210) (0.020) (0.040) (0.015) —— — — — — midSMD Size 5050 mm/2018 mils SMD030-2018 4.72 5.44 — 1.78 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 —— — S6 (0.186) (0.214) — (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) —— — SMD050-2018 4.72 5.44 — 1.78 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 —— — S6 (0.186) (0.214) — (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) —— — SMD100-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 —— — S6 (0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) —— — 4 SMD150-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 —— — S6 (0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) —— — SMD200-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 —— — S6 (0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) —— — SMD Size 7555 mm/2920 mils SMD030 6.73 7.98 — 3.18 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD050 6.73 7.98 — 3.18 4.8 5.44 0.56 0.71 0.20 0.30 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.008) (0.012) (0.085) (0.095) (0.026) (0.054) (0.017) SMD075 6.73 7.98 — 3.18 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD100 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD100/33 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD125 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD260 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD260-RB 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD300 6.73 7.98 — 3.00 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) Lead-free devices are listed in Table S4-B SMD2 Size 8763 mm/3425 mils SMD150 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD150/33 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMDH160 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD185 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) Lead-free devices are listed in Table S4-B 202 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S4-A. Dimensions for Surface-mount Devices in Millimeters (Inches) continued Dimension AB C D E F G H Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min Max. Min. Figure SMD2 Size 8763 mm/3425 mils continued SMD200 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD250 8.00 9.40 — 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) Lead-free devices are listed in Table S4-B Telecom Surface-mount TSL250-080 6.7 7.9 2.7 3.7 4.8 5.3 0.2 0.4 2.5 3.1 —— — — — S7 (0.265) (0.310) (0.110) (0.145) (0.190) (0.210) (0.008) (0.015) (0.100) (0.120) —— — — — TS250-130 8.5 9.4 — 3.4 — 7.4 0.3 — 3.8 —— — — — — S8 (0.335) (0.370) — (0.135) — (0.290) (0.011) — (0.150) —— — — — — TSV250-130 — 6.1 — 6.9 — 3.2 0.56 —— 1.9 1.6 2.31 —— — S10 — (0.240) — (0.270) — (0.126) (0.022) —— (0.075) (0.065) (0.091) —— — TS600-170 18.2 19.4 11.5 12.3 7.2 8.3 1.6 2.4 9.9 10.4 1.5 2.3 —— — S9 (0.720) (0.765) (0.455) (0.485) (0.285) (0.325) (0.065) (0.095) (0.390) (0.410) (0.060) (0.090) —— — TS600-200-RA 18.2 19.4 11.5 12.3 7.2 8.3 1.6 2.4 9.9 10.4 1.5 2.3 —— — S9 (0.720) (0.765) (0.455) (0.485) (0.285) (0.325) (0.065) (0.095) (0.390) (0.410) (0.060) (0.090) —— — TSM600-250 — 17.6 — 11.7 — 11.2 — 5.2 — 2.8 0.6 —— — — — — (0.69) — (0.46) — (0.44) — (0.20) — (0.11) (0.02) —— — — — TSM600-250-RA — 17.6 — 11.7 — 11.2 — 5.2 — 2.8 0.6 —— — — — — (0.69) — (0.46) — (0.44) — (0.20) — (0.11) (0.02) —— — — Table S4-B. Dimensions for Lead-free Surface-mount Devices in Millimeters (Inches) Dimension AB C D E F G H 4 Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min Max. Min. Figure Lead-free nanoSMDC Series Size 3216 mm/1206 mils nanoSMDC020F 3.0 3.4 0.38 0.64 1.37 1.80 0.15 — 0.076 —— — — — — S3 (0.118) (0.134) (0.015) (0.025) (0.054) (0.071) (0.006) — (0.003) —— — — — — nanoSMDC035F 3.0 3.4 0.38 0.64 1.37 1.80 0.15 — 0.076 —— — — — — S3 (0.118) (0.134) (0.015) (0.025) (0.054) (0.071) (0.006) — (0.003) —— — — — — nanoSMDC050F/13.2 3.0 3.4 0.38 0.64 1.37 1.80 0.15 — 0.076 —— — — — — S3 (0.118) (0.134) (0.015) (0.025) (0.054) (0.071) (0.006) — (0.003) —— — — — — nanoSMDC075F 3.0 3.4 0.25 0.38 1.37 1.80 0.15 — 0.076 —— — — — — S3 (0.118) (0.134) (0.010) (0.015) (0.054) (0.071) (0.006) — (0.003) —— — — — — nanoSMDC110F 3.0 3.4 0.67 1.00 1.37 1.80 0.25 — 0.076 —— — — — — S3 (0.118) (0.134) (0.026) (0.039) (0.054) (0.071) (0.010) — (0.003) —— — — — — nanoSMDC150F 3.0 3.4 0.85 1.40 1.37 1.80 0.25 — 0.076 —— — — — — S3 (0.118) (0.134) (0.033) (0.055) (0.054) (0.071) (0.010) — (0.003) —— — — — — Lead-free nanoSMDM Series Size 3216 mm/1206 mils nanoSMDM012F 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM020F 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM050F 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM050F/13.2 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM075F 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — nanoSMDM100F 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05 —— — — — — — S2 (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041) —— — — — — — Lead-free microSMD Series Size 3225 mm/1210 mils microSMD005F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD010F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) — (0.008) —— — — — — Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 203 Table S4-B. Dimensions for Lead-free Surface-mount Devices in Millimeters (Inches) continued Dimension AB C D E F G H Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min Max. Min. Figure microSMD035F 3.00 3.43 0.38 0.62 2.35 2.80 0.30 — 0.25 —— — — — — S3 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.012) — (0.010) —— — — — — microSMD050F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD075F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.015) (0.025) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD110F 3.00 3.43 0.28 0.48 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD150F 3.00 3.43 0.51 1.22 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.020) (0.048) (0.092) (0.110) (0.010) — (0.008) —— — — — — Lead-free microSMD Series Size 3225 mm/1210 mils continued microSMD110F 3.00 3.43 0.28 0.48 2.35 2.80 0.25 — 0.20 —— — — — — S3 (0.118) (0.135) (0.011) (0.019) (0.092) (0.110) (0.010) — (0.008) —— — — — — microSMD150F 3.00 3.43 0.51 1.22 2.35 2.80 0.30 — 0.25 —— — — — — S3 (0.118) (0.135) (0.020) (0.048) (0.092) (0.110) (0.012) — (0.010) —— — — — — Lead-free miniSMDC Series Size 4532 mm/1812 mils miniSMDC014F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) — (0.008) —— — — — — mniSMDC020F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.025) (0.035) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC050F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC075F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC110F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) — (0.008) —— — — — — 4 miniSMDC110F/16 4.37 4.73 0.38 0.62 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.015) (0.025) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC125F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC125F/16 4.37 4.73 0.28 0.48 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC150F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC160F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.011) (0.019) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC200F 4.37 4.73 0.51 1.22 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) — (0.008) —— — — — — miniSMDC260F 4.37 4.73 0.76 1.25 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.030) (0.050) (0.121) (0.134) (0.012) — (0.008) —— — — — — miniSMDC260F/12 4.37 4.73 0.76 1.25 3.07 3.41 0.25 — 0.20 —— — — — — S3 (0.172) (0.186) (0.030) (0.050) (0.121) (0.134) (0.012) — (0.008) —— — — — — Lead-free miniSMDM Series Size 4532 mm/1812 mils miniSMDM075F/24 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM110F 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S2 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM110F/16 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM200F 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — miniSMDM260F 4.35 4.75 1.75 2.00 3.05 3.60 1.4 1.7 —— — — — — — S5 (0.172) (0.187) (0.069) (0.079) (0.120) (0.142) (0.055) (0.067) —— — — — — — 204 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S4-B. Dimensions for Lead-free Surface-mount Devices in Millimeters (Inches) continued Dimension AB C D E F G H Part Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min Max. Min. Figure Lead-free midSMD Series Size 5050 mm/2018 mils SMD030F-2018 4.72 5.44 — 1.78 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S6 (0.186) (0.214) — (0.070) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — SMD100F-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S6 (0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — SMD150F-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S6 (0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — SMD200F-2018 4.72 5.44 — 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 — — — S6 (0.186) (0.214) — (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) — — — Lead-free SMD Series Size 7555 mm/2920 mils SMD030F 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD050F 6.73 7.98 — 3.18 4.80 5.44 0.20 0.30 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.008) (0.012) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD075F 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD075F/60 6.73 7.98 — 3.18 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD100F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD100F/33 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD125F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SMD260F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) 4 SMD300F 6.73 7.98 — 3.00 4.80 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 S7 (0.265) (0.314) — (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) Lead-free SMD2 Series Size 8763 mm/3425 mils SMD150F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD150F/33 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD185F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD200F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SMD250F 8.00 9.40 — 3.00 6.00 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 S7 (0.315) (0.370) — (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 205 206_04RaychemTycoX 9/14/04 11:59 AM Page 206 Figures S11–S19. Typical Time-to-trip Curves at 20°C for Surface-mount Devices Telecom and Networking Devices Figure S11 A = TS600-170/TS600-200 100 A B = TS250-130 B C C = TSV250-130 10 D D = TSL250-080 1 A B 0.10 C D 0.01 0.00 0.50 1.00 1.50 2.00 2.50 3.00 Fault current (A) nanoSMDC and nanoSMDCxxxF Figure S12 A = nanoSMDC020F 10 B = nanoSMDC035F B C = nanoSMDC050F/13.2 A D E F 1 D = nanoSMDC075F C 4 E = nanoSMDC110F 0.1 F = nanoSMDC150, nanoSMDC150F F E 0.01 D B C A 0.001 01 2 3 4 5 6 7 8 9 10 11 12 Fault current (A) nanoSMDM and nanoSMDMxxxF Figure S13 A = nanoSMDM012, 10 nanoSMDM012F B F B = nanoSMDM016 A C 1 E C = nanoSMDM020F D = nanoSMDM050, D nanoSMDM050F, 0.1 nanoSMDM050F/13.2 E = nanoSMDM075, C B nanoSMDM075F 0.01 A F = nanoSMDM100, F E nanoSMDM100F D 0.001 0.1 1 10 100 Fault current (A) 206 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Time-to-trip (s) Time-to-trip (s) Time-to-trip (s) Surface-mount Figures S11–S19. Typical Time-to-trip Curves at 20°C for Surface-mount Devices continued microSMD and microSMDF Figure S14 A = microSMD005, 100 microSMD005F B = microSMD010, D E F C G microSMD010F 10 B A C = microSMD035, microSMD035F 1 D = microSMD050, B microSMD050F 0.1 E = microSMD075, microSMD075F 0.01 F = microSMD110, microSMD110F F G A C D E 0.001 0.1 1 10 100 G = microSMD150, Fault current (A) microSMD150F miniSMDM and miniSMDMxxxF Figure S15 (data at 25°C) 100 A = miniSMDM075, miniSMDM075/24, E miniSMDM075F/24 10 D B F A C 4 B = miniSMDM110, miniSMDM110F, 1 miniSMDM110/16, miniSMDM110F/116 0.1 C = miniSMDM150/24 F D = miniSMDM160 0.01 E E = miniSMDM200, D miniSMDM200F 0.001 C A B 110 100 F = miniSMDM260, Fault current (A) miniSMDM260F miniSMDC, miniSMDCxxxF and Figure S16 miniSMDE AB C D E FG IJK A = miniSMDC014, miniSMDC014F 100 B = miniSMDC020, miniSMDC020F C = miniSMDC050, miniSMDC050F 10 H D = miniSMDC075, miniSMDC075F E = miniSMDC110, miniSMDC110F, 1 miniSMDC110F/16 F = miniSMDC125, miniSMDC125F, 0.1 miniSMDC125F/16 K G = miniSMDC150, miniSMDC150F H J 0.01 G I H = miniSMDC160F B F E A I = miniSMDC200, miniSMDC200F C D J = miniSMDE190 0.001 0.1 1 10 100 K = miniSMDC260, miniSMDC260F, Fault current (A) miniSMDC260F/12 Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 207 Time-to-trip (s) Time-to-trip (s) Time-to-trip (s) Figures S11–S19. Typical Time-to-Trip Curves at 20°C for Surface-mount Devices midSMD Figure S17 A = SMD030-2018, AC B D E 100 SMD030F-2018 B = SMD050-2018 10 C = SMD100-2018, 1 SMD100F-2018 D = SMD150-2018, 0.1 SMD150F-2018 E 0.01 E = SMD200-2018, A B D SMD200F-2018 C 0.001 0.1 1 10 100 Fault current (A) SMD and SMDxxxF Figure S18 A = SMD030, SMD030F A BC D EFG 100 B = SMD050, SMD050F C = SMD075, SMD075F, 10 SMD075F/60 4 1 D = SMD100, SMD100F, SMD100/33, SMD100F/33 0.1 E = SMD125, SMD125F G B F = SMD260, SMD260RB, F 0.01 A E SMD260F C D G = SMD300, SMD300F 0.001 0.1 1 10 100 Fault current (A) SMD2 and SMDxxxF Figure S19 A = SMD150, SMD150F, ACBDE 100 SMD150/33, SMD150F/33 B = SMDH160 10 C = SMD185, SMD185F 1 D = SMD200, SMD200F E = SMD250, SMD250F 0.1 E D B 0.01 C A 0.001 0.1 1 10 100 Fault current (A) 208 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Time-to-trip (s) Time-to-trip (s) Time-to-trip (s) 209_04RaychemTycoX 9/14/04 9:09 AM Page 209 Surface-mount Table S5. Physical Characteristics and Environmental Specifications for Surface-mount Devices Operating temperature range -40°C to 85°C, -40°C to 125°C for SMDH160 Physical Characteristics Terminal pad material Solder-plated copper for nanoSMDC, microSMD, and miniSMDC series Gold plating for nanoSMDM, and miniSMDM series 100% tin for SMD series Soldering characteristics ANSI/J-STD-002B Category 3 for nanoSMDC, nanoSMDM, microSMD, miniSMDC, and miniSMDM series ANSI/J-STD-002B Category 1 for SMD series Solder heat withstand per IEC-STD 68-2-20, Test Tb, Section 5, Method 1A Flammability resistance per IEC 695-2-2 Needle Flame Test for 20 sec. Recommended storage 40°C max, 70% R.H. max; devices may not meet conditions specified ratings if storage conditions are exceeded. Environmental Specifications Test Test Method Conditions Resistance Change Passive aging Raychem PS300, Section 5.3.2 60°C, 1000 hours ±3% typical 85°C, 1000 hours ±5% typical Humidity aging Raychem PS300, Section 5.3.1 85°C, 85% RH, 100 hours ±1.2% typical Thermal shock MIL-STD-202, Method 107G 85°C, -40°C (20 times) -33% typical 125°C, -55°C (10 times) -33% typical Vibration MIL-STD-883C per MIL-STD-883C No change Solvent resistance Raychem PS300, Section 5.2.2 Freon No change Trichloroethane No change Hydrocarbons No change 4 Agency Recognition for Surface-mount Devices* UL File # E74889 for all surface-mount devices CSA File # CA78165 for SMD/miniSMDC/miniSMDM/microSMD/nanoSMDC/nanoSMDM series TÜV Certificate # R9872048 for microSMD/miniSMDC/miniSMDM series Certificate # R2172061 for nanoSMDM/nanoSMDC series Certificate # R9872049 for SMD series *Refer to Telecom and Networking section for agency recognition on Telecom and Networking Surface Mount Devices. Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 209 Table S6-A. Packaging and Marking Information for Surface-mount Devices Recommended Pad Layout Figures [mm (In.)] Tape & Reel Standard Part Dimension Dimension Dimension Agency Part Number Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition nanoSMDC Series Size 3216 mm/1206 mils nanoSMDC150 3,000 15,000 J 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV Lead-free devices are listed in Table S6-B nanoSMDM Series Size 3216 mm/1206 mils nanoSMDM012 3,000 15,000 012 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM016 3,000 15,000 016 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM050 3,000 15,000 050 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM075 3,000 15,000 075 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM100 3,000 15,000 100 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV Lead-free devices are listed in Table S6-B microSMD Series Size 3225 mm/1210 mils microSMD005 4,000 20,000 05 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD010 4,000 20,000 10 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD035 4,000 20,000 3 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD050 4,000 20,000 50 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD075 4,000 20,000 75 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD110 4,000 20,000 11 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD150 4,000 20,000 15 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV Lead-free devices are listed in Table S6-B 4 miniSMDC Series Size 4532 mm/1812 mils miniSMDC014 2,000 10,000 14 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC020 2,000 10,000 2 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC050 2,000 10,000 5 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC075 2,000 10,000 7 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC110 2,000 10,000 1 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC125 2,000 10,000 12 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC150 2,000 10,000 15 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC200 2,000 10,000 20 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC260 1,500 7,500 26 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV Lead-free devices are listed in Table S6-B miniSMDM Series Size 4532 mm/1812 mils miniSMDM075 3,000 15,000 075 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM075/24 3,000 15,000 075G 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM110 3,000 15,000 110 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM110/16 3,000 15,000 110G 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM150/24 3,000 15,000 150 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM160 3,000 15,000 160 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM200 3,000 15,000 200 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM260 3,000 15,000 260 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV Lead-free devices are listed in Table S6-B miniSMDE Series Size 11550 mm/4420 mils miniSMDE190 5,000 20,000 19 4.75 (0.187) 1.45 (0.057) 9.57 (0.377) UL, CSA, TÜV 210 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S6-A. Packaging and Marking Information for Surface-mount Devices continued Recommended Pad Layout Figures [mm (In.)] Tape & Reel Standard Part Dimension Dimension Dimension Agency Part Number Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition midSMD Size 5050 mm/2018 mils SMD030-2018 4,000 20,000 A03 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD050-2018 4,000 20,000 A05 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA SMD100-2018 4,000 20,000 A10 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD150-2018 4,000 20,000 A15 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD200-2018 4,000 20,000 A20 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD Size 7555 mm/2920 mils SMD030 2,000 10,000 030 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD050 2,000 10,000 050 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD075 2,000 10,000 075 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD100 2,000 10,000 100 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD100/33 2,000 10,000 103 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD125 2,000 10,000 125 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD260 2,000 10,000 260 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD260-RB 2,000 10,000 260 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV SMD300 2,000 10,000 300 3.1 (0.12) 2.3 (0.09) 5.1 (0.201) UL, CSA, TÜV Lead-free devices are listed in Table S6-B SMD2 Size 8763 mm/3425 mils 4 SMD150 1,500 7,500 150 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD150/33 1,500 7,500 153 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMDH160 1,500 7,500 160 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) SMD185 1,500 7,500 185 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD200 1,500 7,500 200 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD250 1,500 7,500 250 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV Lead-free devices are listed in Table S6-B Telecom Surface-mount TSL250-080 1,500 7,500 T08 3.6 (0.14) 1.8 (0.07) 5.5 (0.22) UL, CSA, TÜV TS250-130 1,500 7,500 T13 4.6 (0.18) 1.8 (0.07) 6.1 (0.24) UL, CSA, TÜV TSV250-130 1,200 6,000 T13V** * UL, CSA, TÜV TS600-170 300 900 T20 9.91 (0.390) 3.30 (0.130) 3.35 (0.132) UL, CSA TS600-200-RA 300 900 T20 9.91 (0.390) 3.30 (0.130) 3.35 (0.132) UL, CSA TSM600-250 200 1,000 TSM600** * UL, CSA *For TSV250-130 and BM 600-250 pad layout, see Telecom and Networking Section. Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 211 Table S6-B. Packaging and Marking Information for Lead-free Surface-mount Devices Recommended Pad Layout Figures [mm (In.)] Tape & Reel Standard Part Dimension Dimension Dimension Agency Part Number Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition Lead-free nanoSMDC Series Size 3216 mm/1206 mils nanoSMDC020F 3,000 15,000 02 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV nanoSMDC035F 3,000 15,000 03 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA nanoSMDC050F/13.2 3,000 15,000 M 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV nanoSMDC075F 3,000 15,000 L 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV nanoSMDC110F 3,000 15,000 K 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV nanoSMDC150F 3,000 15,000 J 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV Lead-free nanoSMDM Series Size 3216 mm/1206 mils nanoSMDM012F 3,000 15,000 012F 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM020F 3,000 15,000 02F 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM050F 3,000 15,000 05F 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM050F/13.2 3,000 15,000 5FG 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM075F 3,000 15,000 07F 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV nanoSMDM100F 3,000 15,000 10F 1.80 (0.071) 1.00 (0.039) 1.5 (0.059) UL, CSA, TÜV Lead-free microSMD Series Size 3225 mm/1210 mils microSMD005F 4,000 20,000 05F 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD010F 4,000 20,000 10 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV 4 microSMD035F 4,000 20,000 3 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD050F 4,000 20,000 50 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD075F 4,000 20,000 75 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD110F 4,000 20,000 11 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV microSMD150F 4,000 20,000 15 2.50 (0.098) 1.00 (0.039) 2.00 (0.079) UL, CSA, TÜV Lead-free miniSMDC Series Size 4532 mm/1812 mils miniSMDC014F 2,000 10,000 14 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC020F 2,000 10,000 2 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC050F 2,000 10,000 5 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC075F 2,000 10,000 7 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC110F 2,000 10,000 1 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV 110F miniSMDC110F/16 2,000 10,000 16V 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC125F 2,000 10,000 12 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC125F/16 125F 2,000 10,000 16V 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC150F 2,000 10,000 15 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC160F 2,000 10,000 16 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC200F 2,000 10,000 20 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC260F 1,500 7,500 26 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV miniSMDC260F/12 260F 1,500 7,500 12V 3.15 (0.124) 1.78 (0.070) 3.45 (0.136) UL, CSA, TÜV 212 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Surface-mount Table S6-B. Packaging and Marking Information for Lead-free Surface-mount Devices continued Recommended Pad Layout Figures [mm (In.)] Tape & Reel Standard Part Dimension Dimension Dimension Agency Part Number Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition Lead-free miniSMDM Series Size 4532 mm/1812 mils miniSMDM075F/24 3,000 15,000 07FG 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM110F 3,000 15,000 110F 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM110F/16 3,000 15,000 11FG 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM200F 3,000 15,000 200F 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV miniSMDM260F 3,000 15,000 260F 3.20 (0.126) 1.50 (0.059) 2.50 (0.098) UL, CSA, TÜV Lead-free midSMD Series Size 5050 mm/2018 mils SMD030F-2018 4,000 20,000 A03F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD100F-2018 4,000 20,000 A10F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD150F-2018 4,000 20,000 A15F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD200F-2018 4,000 20,000 A20F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV Lead-free SMD Series Size 7555 mm/2920 mils SMD030F 2,000 10,000 030F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD050F 2,000 10,000 050F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD075F 2,000 10,000 075F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD075F/60 2,000 10,000 075F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA 4 SMD100F 2,000 10,000 100F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD100F/33 2,000 10,000 103F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD125F 2,000 10,000 125F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD260F 2,000 10,000 260F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV SMD300F 2,000 10,000 300F 4.6 (0.18) 1.50 (0.059) 3.4 (0.134) UL, CSA, TÜV Lead-free SMD2 Devices Size 8763 mm/3425 mils SMD150F 1,500 7,500 150F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD150F/33 1,500 7,500 153F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD185F 1,500 7,500 185F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD200F 1,500 7,500 200F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV SMD250F 1,500 7,500 250F 4.6 (0.18) 2.3 (0.09) 6.1 (0.240) UL, CSA, TÜV Figure S20. Recommended Pad Layout A C B B Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 213 Part Numbering System SMD 150 F /33 -RB -2 2 = Tape and reel packaging Rx - Resistance range (Limited part number availability) Alternative voltage rating (If applicable) Lead free Hold current indicator Product series TS250 -130 -RA -B-0.5 -2 2 = Tape and reel packaging Bxx = Resistance matched (Optional) Rx - Resistance range (Optional) Hold current (mA) Product series Solder Reflow and Rework Recommendations for Surface-mount Devices Solder Reflow Figure S21 • Recommended reflow methods: IR, Vapor phase, and hot air Preheating Soldering Cooling 300 oven. 4 • The following product series are not designed to be wave soldered 250 to circuit boards: nanoSMDM 200 miniSMDM midSMD 150 SMD SMD2 TS 100 • The following product series are designed to be wave soldered 50 to circuit boards: nanoSMDC 0 microSMD 30 to 90 120 10 to 20 miniSMDC, miniSMDE Time(s) • Recommended maximum paste thickness for the microSMD, Caution: miniSMDC, and miniSMDE • If reflow temperatures exceed the recommended profile, devices devices is 0.25 mm (10mils), may not meet the performance specifications. 0.13-0.25 mm for miniSMDM • For SMD and midSMD series and nanoSMDM, and 0.38 mm Rework and all TS devices rework for SMD. • Use standard industry practices should be confined to removal • Devices can be cleaned using for the nanoSMDC, of the installed product and standard methods and solvents. nanoSMDM, microSMD, replacement with a fresh miniSMDC, miniSMDM, and device. miniSMDE devices. 214 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection Temperature (°C) Surface-mount Table S7. Tape and Reel Specifications for Surface-mount Devices (in Millimeters) nanoSMDC miniSMDC nanoSMDM microSMD miniSMDM miniSMDE190 midSMD SMD SMD2 EIA 481-1 EIA 481-1 EIA 481-1 EIA 481-2 EIA 481-2 EIA 481-2 EIA 481-2 W 8.0 ± 0.30 8.0 ± 0.30 12.0 ± 0.30 24.0 ± 0.30 16.0 ± 0.30 16.0 ± 0.30 16.0 ± 0.30 P 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 4.0 ± 0.10 o P 4.0 ± 0.10 4.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10 8.0 ± 0.10 12.0 ± 0.10 1 P 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.05 2.0 ± 0.10 2.0 ± 0.10 2.0 ± 0.10 2.0 ± 0.10 2 A Table S7a 2.9 ± 0.10 Table S7b 5.70 ± 0.10 5.11 ± 0.15 5.6 ± 0.23 6.9 ±0.23 o B Table S7a 3.5 ± 0.10 Table S7b 11.90 ± 0.10 5.6 ± 0.23 8.1 ± 0.15 9.6 ± 0.15 o B max. 4.35 4.35 8.2** 20.1 12.1 12.1 12.1 1 D 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 1.5 + 0.10/ -.00 o F 3.5 ± 0.05 3.5 ± 0.05 5.5 ± 0.05 11.5 ± 0.10 7.5 ± 0.10 7.5 ± 0.10 7.5 ± 0.10 E 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1 E min. 6.25 6.25 10.25 22.25 14.25 14.25 14.25 2 T max. 0.6 0.6 0.6 0.6 0.6 0.6 0.6 T max. 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1 K Table S7a 0.90 ± 0.10* Table S7b 0.95 ± 0.10 1.8 ± 0.15 3.2 ± 0.15 3.4 ± 0.15 o Leader min. 390*** 390 390*** 400 400 400 400 Trailer min. 160*** 160 160*** 160 160 160 160 *1.1±0.05 for microSMD150 **5.9 for miniSMDM ***200 for nanoSMDM, miniSMDM Table S7a Table S7b 4 nanoSMDC150 nanoSMDM miniSMDC miniSMDC260 miniSMDM A 2.3 ± 0.10 1.88 ± 0.10 A 3.5 ± 0.23 3.7 ± 0.10 3.5 ± 0.23 o o B 3.5 ± 0.10 3.5 ± 0.10 B 5.1 ± 0.15 4.9 ± 0.10 5.1 ± 0.15 o o K 1.45 ± 0.10 1.4 ± 0.10 K 0.9 ± 0.15 1.4 ± 0.10 2.3 ± 0.15 o o Table S7c. Reel Dimensions for Surface-mount Devices (in millimeters) nanoSMDC nanoSMDM microSMD miniSMDC miniSMDM miniSMDE190 midSMD SMD SMD2 A max. 180 180 180 340 330 330 330 330 N min. 50 50 50 50 60 50 50 50 W 8.5 + 1.5/-.00 8.4 + 1.5/-.00 12.4 + 2.0/-.00 12.4 + 2.0/-.00 24.4 + 2.0/-.00 16.4 + 2.0/-.00 16.4 + 2.0/-.00 16.4 + 2.0/-.00 1 W max. 14.4 14.4 18.4 18.4 30.4 22.4 22.4 22.4 2 Raychem Circuit Protection PolySwitch Surface-mount Resettable Devices 215 Figure S21. EIA Taped Component Dimensions Embossment P 0 D P T 0 2 E 1 Cover tape A 0 W F E 2 B 0 B K 1 0 P T 1 1 Center lines of cavity Figure S22. EIA Reel Dimensions W (measured at hub) 2 A N (hub dia.) Cover tape W (measured at hub) 1 4 Carrier tape Embossed cavity Latest Information • Please visit us at www.circuitprotection.com or contact your local representative for the latest information. • The information in this data package contains some preliminary information. Raychem Circuit Protection, a division of Tyco Electronics, reserves the right to change any of the specifications without notice. In addition, Tyco Electronics reserves the right to make changes—without notification to Buyer—to materials or processing that do not affect compliance with any applicable specification. WARNING: • Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. • The devices are intended for protection against occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. • Contamination of the PPTC material with certain silicon based oils or some aggressive solvents can adversely impact the performance of the devices. • Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and mechanical procedures for electronic components. di • Operation in circuits with a large inductance can generate a circuit voltage (L /dt) above the rated voltage of the PolySwitch resettable device. 216 PolySwitch Surface-mount Resettable Devices Raychem Circuit Protection