[Print This Datasheet] Endura SC815E Endura 815E FlexATX Pentium III Motherboard ® Endura motherboards are Intel architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle FEATURE SUMMARY management, Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued Small form factor l support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications. The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is therefore a very versatile motherboard suitable for a wide variety of TM ® applications. It is available with either Celeron or Pentium III processors in FC-PGA package providing scalable performance and the option to choose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Endura SC815E Specifications FEATURE FUNCTION DESCRIPTION PROCESSOR Socket 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package FSB 66MHz, 100MHz, 133MHz operation CHIPSET Intel 815E chipset with ICH2 MEMORY Type Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Capacity Not supported ECC/Parity VIDEO Controller 3D graphics controller integrated in 815E chipset Display Cache Optional display cache via GPA module in the AGP slot Stored in main memory (holds 2D and 3D data) Frame Buffer Silicon Image SII164 PanelLink controller Flat Panel Cabled DVI or DFP connector from header DFP/DVI Optional DVI or DFP adapter for rear I/O mounting AUDIO Controller AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) Connectors ATAPI connector for CD-ROM (stereo) ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones NETWORK Controller Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible Connector RJ45 with LEDs for line activity, link integrity and line speed IDE Devices Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Types Supports ATAPI, LS120 and ZIP drives FLOPPY Types Supports standard 2- and 3-mode 3.5" floppy drive MECHANICAL Dimensions 9" x 7.5" Compliance MicroATX and FlexATX compliant PCB Four layers I/O shield Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors I/O Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2 via 10-way header IrDA Supported in place of COM2 via front panel connector Dual stacked USB 1.1 rear connector USB Motherboard header for single USB port USB interface via AGP slot Swappable PS/2 connectors Keyboard & Phoenix keyboard code Mouse Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators GPIO EXPANSION PCI Three dedicated bus master PCI 2.2 slots SLOTS ISA Connector for PCI/ISA bridge support via PCI slot AGP 4X AGP slot SYSTEM Monitoring of voltage, temperature and fans MANAGEMENT Anti-tamper security CPU fansink and system fan speed control POWER PCI PME, ACPI 1.0, APM 1.2 MANAGEMENT POWER SUPPLY Type Support for hard- and soft- switched PSU Typical 35W BATTERY Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup BIOS Type PhoenixBIOS 4.0 Release 6.0 Special Customizable defaults, customer logo, silent boot, automatic Features configuration OPERATING Windows® 95, Windows 98, Windows 2000, Windows NT®  SYSTEMS Qualification of real time and other operating systems subject to demand Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950 EMC Designed for compliance with EN55022, EN55024 and FCC COMPLIANCE Part 15 Class B ENVIRONMENT Operating 0°C to 55°C Temp -40°C to 85°C Storage Temp 5% to 95% non-condensing Relative Humidity Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Ordering Information Call for pricing and availability. Refer to the order codes below. DESCRIPTION SC815E uATX without integrated DVI, RoHS PRODUCT CODE: SCL03-0-0 SC815E ATX with integrated DVI, RoHS PRODUCT CODE: SCFPL03-0-0 I/O shield for SCL03-0-0, RoHS PRODUCT CODE: ATX-L 81X IOSHLD I/O shield for SCFPL03-0-0, RoHS PRODUCT CODE: ATX-FPL 81XIOSHLD DVI connector / bracket assembly, RoHS PRODUCT CODE: DVI_CABLE-R 2009 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 4 of 4 [Print This Datasheet] Endura SC815E Endura 815E FlexATX Pentium III Motherboard ® Endura motherboards are Intel architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle FEATURE SUMMARY management, Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued l Small form factor support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications. The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is therefore a very versatile motherboard suitable for a wide variety of TM ® applications. It is available with either Celeron or Pentium III processors in FC-PGA package providing scalable performance and the option to choose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Endura SC815E Specifications FEATURE FUNCTION DESCRIPTION PROCESSOR Socket 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package FSB 66MHz, 100MHz, 133MHz operation CHIPSET Intel 815E chipset with ICH2 MEMORY Type Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Capacity Not supported ECC/Parity VIDEO Controller 3D graphics controller integrated in 815E chipset Display Cache Optional display cache via GPA module in the AGP slot Stored in main memory (holds 2D and 3D data) Frame Buffer Silicon Image SII164 PanelLink controller Flat Panel Cabled DVI or DFP connector from header DFP/DVI Optional DVI or DFP adapter for rear I/O mounting AUDIO Controller AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) Connectors ATAPI connector for CD-ROM (stereo) ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones NETWORK Controller Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible Connector RJ45 with LEDs for line activity, link integrity and line speed IDE Devices Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Types Supports ATAPI, LS120 and ZIP drives FLOPPY Types Supports standard 2- and 3-mode 3.5" floppy drive MECHANICAL Dimensions 9" x 7.5" Compliance MicroATX and FlexATX compliant PCB Four layers I/O shield Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors I/O Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2 via 10-way header IrDA Supported in place of COM2 via front panel connector Dual stacked USB 1.1 rear connector USB Motherboard header for single USB port USB interface via AGP slot Swappable PS/2 connectors Keyboard & Phoenix keyboard code Mouse Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators GPIO EXPANSION PCI Three dedicated bus master PCI 2.2 slots SLOTS ISA Connector for PCI/ISA bridge support via PCI slot AGP 4X AGP slot SYSTEM Monitoring of voltage, temperature and fans MANAGEMENT Anti-tamper security CPU fansink and system fan speed control POWER PCI PME, ACPI 1.0, APM 1.2 MANAGEMENT POWER SUPPLY Type Support for hard- and soft- switched PSU Typical 35W BATTERY Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup BIOS Type PhoenixBIOS 4.0 Release 6.0 Special Customizable defaults, customer logo, silent boot, automatic Features configuration OPERATING Windows® 95, Windows 98, Windows 2000, Windows NT®  SYSTEMS Qualification of real time and other operating systems subject to demand Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950 EMC Designed for compliance with EN55022, EN55024 and FCC COMPLIANCE Part 15 Class B ENVIRONMENT Operating 0°C to 55°C Temp -40°C to 85°C Storage Temp 5% to 95% non-condensing Relative Humidity Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Ordering Information Call for pricing and availability. Refer to the order codes below. DESCRIPTION SC815E uATX without integrated DVI, RoHS PRODUCT CODE: SCL03-0-0 SC815E ATX with integrated DVI, RoHS PRODUCT CODE: SCFPL03-0-0 I/O shield for SCL03-0-0, RoHS PRODUCT CODE: ATX-L 81X IOSHLD I/O shield for SCFPL03-0-0, RoHS PRODUCT CODE: ATX-FPL 81XIOSHLD DVI connector / bracket assembly, RoHS PRODUCT CODE: DVI_CABLE-R 2009 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 4 of 4 [Print This Datasheet] Endura SC815E Endura 815E FlexATX Pentium III Motherboard ® Endura motherboards are Intel architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle FEATURE SUMMARY management, Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued l Small form factor support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications. The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is therefore a very versatile motherboard suitable for a wide variety of TM ® applications. It is available with either Celeron or Pentium III processors in FC-PGA package providing scalable performance and the option to choose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Endura SC815E Specifications FEATURE FUNCTION DESCRIPTION PROCESSOR Socket 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package FSB 66MHz, 100MHz, 133MHz operation CHIPSET Intel 815E chipset with ICH2 MEMORY Type Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Capacity Not supported ECC/Parity VIDEO Controller 3D graphics controller integrated in 815E chipset Display Cache Optional display cache via GPA module in the AGP slot Stored in main memory (holds 2D and 3D data) Frame Buffer Silicon Image SII164 PanelLink controller Flat Panel Cabled DVI or DFP connector from header DFP/DVI Optional DVI or DFP adapter for rear I/O mounting AUDIO Controller AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) Connectors ATAPI connector for CD-ROM (stereo) ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones NETWORK Controller Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible Connector RJ45 with LEDs for line activity, link integrity and line speed IDE Devices Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Types Supports ATAPI, LS120 and ZIP drives FLOPPY Types Supports standard 2- and 3-mode 3.5" floppy drive MECHANICAL Dimensions 9" x 7.5" Compliance MicroATX and FlexATX compliant PCB Four layers I/O shield Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors I/O Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2 via 10-way header IrDA Supported in place of COM2 via front panel connector Dual stacked USB 1.1 rear connector USB Motherboard header for single USB port USB interface via AGP slot Swappable PS/2 connectors Keyboard & Phoenix keyboard code Mouse Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators GPIO EXPANSION PCI Three dedicated bus master PCI 2.2 slots SLOTS ISA Connector for PCI/ISA bridge support via PCI slot AGP 4X AGP slot SYSTEM Monitoring of voltage, temperature and fans MANAGEMENT Anti-tamper security CPU fansink and system fan speed control POWER PCI PME, ACPI 1.0, APM 1.2 MANAGEMENT POWER SUPPLY Type Support for hard- and soft- switched PSU Typical 35W BATTERY Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup BIOS Type PhoenixBIOS 4.0 Release 6.0 Special Customizable defaults, customer logo, silent boot, automatic Features configuration OPERATING Windows® 95, Windows 98, Windows 2000, Windows NT®  SYSTEMS Qualification of real time and other operating systems subject to demand Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950 EMC Designed for compliance with EN55022, EN55024 and FCC COMPLIANCE Part 15 Class B ENVIRONMENT Operating 0°C to 55°C Temp -40°C to 85°C Storage Temp 5% to 95% non-condensing Relative Humidity Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Ordering Information Call for pricing and availability. Refer to the order codes below. DESCRIPTION SC815E uATX without integrated DVI, RoHS PRODUCT CODE: SCL03-0-0 SC815E ATX with integrated DVI, RoHS PRODUCT CODE: SCFPL03-0-0 I/O shield for SCL03-0-0, RoHS PRODUCT CODE: ATX-L 81X IOSHLD I/O shield for SCFPL03-0-0, RoHS PRODUCT CODE: ATX-FPL 81XIOSHLD DVI connector / bracket assembly, RoHS PRODUCT CODE: DVI_CABLE-R 2009 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 4 of 4 [Print This Datasheet] Endura SC815E Endura 815E FlexATX Pentium III Motherboard ® Endura motherboards are Intel architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle FEATURE SUMMARY management, Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued Small form factor l support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications. The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is therefore a very versatile motherboard suitable for a wide variety of TM ® applications. It is available with either Celeron or Pentium III processors in FC-PGA package providing scalable performance and the option to choose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Endura SC815E Specifications FEATURE FUNCTION DESCRIPTION PROCESSOR Socket 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package FSB 66MHz, 100MHz, 133MHz operation CHIPSET Intel 815E chipset with ICH2 MEMORY Type Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Capacity Not supported ECC/Parity VIDEO Controller 3D graphics controller integrated in 815E chipset Display Cache Optional display cache via GPA module in the AGP slot Stored in main memory (holds 2D and 3D data) Frame Buffer Silicon Image SII164 PanelLink controller Flat Panel Cabled DVI or DFP connector from header DFP/DVI Optional DVI or DFP adapter for rear I/O mounting AUDIO Controller AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) Connectors ATAPI connector for CD-ROM (stereo) ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones NETWORK Controller Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible Connector RJ45 with LEDs for line activity, link integrity and line speed IDE Devices Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Types Supports ATAPI, LS120 and ZIP drives FLOPPY Types Supports standard 2- and 3-mode 3.5" floppy drive MECHANICAL Dimensions 9" x 7.5" Compliance MicroATX and FlexATX compliant PCB Four layers I/O shield Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors I/O Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2 via 10-way header IrDA Supported in place of COM2 via front panel connector Dual stacked USB 1.1 rear connector USB Motherboard header for single USB port USB interface via AGP slot Swappable PS/2 connectors Keyboard & Phoenix keyboard code Mouse Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators GPIO EXPANSION PCI Three dedicated bus master PCI 2.2 slots SLOTS ISA Connector for PCI/ISA bridge support via PCI slot AGP 4X AGP slot SYSTEM Monitoring of voltage, temperature and fans MANAGEMENT Anti-tamper security CPU fansink and system fan speed control POWER PCI PME, ACPI 1.0, APM 1.2 MANAGEMENT POWER SUPPLY Type Support for hard- and soft- switched PSU Typical 35W BATTERY Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup BIOS Type PhoenixBIOS 4.0 Release 6.0 Special Customizable defaults, customer logo, silent boot, automatic Features configuration OPERATING Windows® 95, Windows 98, Windows 2000, Windows NT®  SYSTEMS Qualification of real time and other operating systems subject to demand Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950 EMC Designed for compliance with EN55022, EN55024 and FCC COMPLIANCE Part 15 Class B ENVIRONMENT Operating 0°C to 55°C Temp -40°C to 85°C Storage Temp 5% to 95% non-condensing Relative Humidity Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 2 of 4  * All other trademarks are the properties of their respective owners.  Ordering Information Call for pricing and availability. Refer to the order codes below. DESCRIPTION SC815E uATX without integrated DVI, RoHS PRODUCT CODE: SCL03-0-0 SC815E ATX with integrated DVI, RoHS PRODUCT CODE: SCFPL03-0-0 I/O shield for SCL03-0-0, RoHS PRODUCT CODE: ATX-L 81X IOSHLD I/O shield for SCFPL03-0-0, RoHS PRODUCT CODE: ATX-FPL 81XIOSHLD DVI connector / bracket assembly, RoHS PRODUCT CODE: DVI_CABLE-R 2009 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SC815E DATA SHEET | © 2009 RadiSys Corporation | ID: 10-30-2008 7 | Page 4 of 4