WDCS WDCS Active System Components I-BDA 48000 series for SMR 800/900 The 48000 series of off-air bi-directional amplifiers (BDAs) are certified by the FCC and IC Canada for use by service providers. Off-air BDAs receive and amplify the donor base transmit signals into the coverage area while receiving and amplifying the subscriber signals back to the base. Thus, these BDAs maximize capacity in the coverage area at the lowest cost while allowing the service provider to centralize base radios for better spectrum use and control with lower maintenance costs.  External filter ports to customize the pass band in the field  High dynamic range to support hundreds of analog and / or digital subscribers 48000 Series BDA  Output limiting circuitry - maintains low IMD and prevents oscillation  Low on-going cost of use - fast set up, high MTBF and no maintenance  Modular components replaced in minutes with a screwdriver for easy field repair In UL Out Rx or 4 Uplink PA80-9942 LNA80-0002 External filter ports allow for the connection of Duplexers externally mounted filtering. The external filter modifies the pass band and can be field changed as needed. Base LNA80-0002 Service PA80-9942 High visibility power and fault LEDs are located on Tx or Out DL In Downlink the faceplate of the BDA. Additionally, the PM800 External filter forts, SMA female performance monitor connects to the 15-pin test port for detailed diagnostics. The PM800 can be permanently mounted near the BDA via a 10-foot extension cable (included) or up to 100 feet away with optional extension cables. For remote surveillance, the RPM800 will dial out on alarms and provide remote shutdown over a POTs line. SYSTEM INTEGRATION POWER/MECHANICAL SPEC./ENVIRONMENT Applications In-building Power Consumption, VA 115 Number of Carriers Multi carrier Cooling Convection Amplifying System Off-air, bi-directional MTBF > 100,000 h total Max. Cascading 6 BDAs RF Ports 2 connectors, N-female, 50 ohms Housing Metal casing, coated, wall mount PERFORMANCE Color Semi gloss, grey Output Power, dBm 30 Dimensions, W x H x D, mm (in) 470x343x185 (18.5x13.5x7.3) 3rd Intercept Point, DL/UL, dBm > 45 / > 45 Weight, kg (lb) < 12.6 (28) Gain, DL/UL, dB 60 - 80 variable, manually Operation Temperature, °C (°F) -30 to +50 (-22 to + 122) Return Loss, dB > 14 Humidity, % 90, non condensing Noise figure, dB < 3 at max. gain DL / UL MONITORING Remote Monitoring RPM800 Alarm Interface TTL ORDERING INFORMATION Model Number Frequency Band Frequency Range UL, MHz Frequency Range DL, MHz I-BDA-48710 SMR 800 806 - 824 851 - 869 I-BDA-48722 SMR 900 896 - 902 935 - 941 587 www.rfsworld.com