FE & FF Series INM-W Series Active BGA Heatsinks Elliptical Fin Aluminum BGA Heatsink Removable Heatsinks for BGA Chipsets K01 Passive BGA Cooler Products: HS1800 Series: 21-45mm plate fin (aluminum) ideal for linear air flow Longitudinal Longitudinal 2.00 2.40 12.9 INL Series: Plate Fin 1.86 2.28 Plate Fin 17.6 27-37.5mm plate fin (aluminum) ideal 2.6 for linear air flow INM-W Series 3.1 19-45mm elliptical fin (aluminum) 1.90 2.28 ideal for linear airflow and where 1.03 Spring free length: 11.5 ± 0.4 mm multiple heatsinks are utilized 1.45 Spring constant: 0.55 lb/mm HS2000-60 Series: Rating: UL 94-VO 21-45mm round pin (aluminum) ideal Recommended hole size in PCB for omni directional air flow is 2.94 mm to 3.20 mm HS2000-80 Series: (1) Part Number 21-45mm round pin (aluminum) ideal for omni directional air flow Thermal Hole to Optional Fansink Width of Length of Overall Thermal Resistance Hole INM-P Series: Voltage Fansink Heatsink Heatsink Height 27-42.5mm round pin (aluminum) ideal Optional Tape/Pad Distance Theta_SA Part # Input Part # (In) Fan Spec for omni-directional air flow Push Pin (In) (mm) Harness Spec (C/W) (In) INM-PCU Series: Bearing: Length: FE1567 12V 19-42.5mm round pin (copper) ideal for Vapo 300 mm (+/-20) 12.7 2.3 omni directional air flow FF1567 5V Airflow: Small Round Pin: Connector: 4.90 CFM 12.7-25.4mm round pin (aluminum) Molex 22-01-3037 FE1568 12V ideal for omni directional air flow Noise: The INM-W Series of elliptical fin aluminum BGA Mechanical Outline Drawing 1.5 18.3 25.0 dBa 37.5004 Series: Pin 1: 1.03 Heatsinks are high efficiency cooling products FF1568 5V (See 2nd page for “LW” & “H” dimensional values) 37.5mm round pin (aluminum or copper) Ground (Black) +K01 +T710 Speed: 1.45 2.28 x which are ideal for linear air flow environments. ideal for omni directional air flow 9,500 RPM 1.86 FE1569 12V Pushpin Heatsinks: Pin 2: Size: These devices mount with EZ Snap™ mounting clips 1.3 Pushpin heatsinks (aluminum) ideal for 24.6 K (2.5mm) + Voltage Input 30 x 6mm FF1569 5V linear air flow and / or thermal tape to provide optimum cooling Optional (Red) TM EZ-Snap MTBF: for various package sizes and airflow. These off- Mounting Clip Custom Design and 65K Hours FE1570 12V the-shelf, high efficiency solutions are easy to Pin 3: Manufacturing Services: 1.1 Tachometer install and require no special board modifications Power: 29.7 Our experienced engineers and FF1570 5V 0.9 Watts (Yellow or White) or complex assemblies. production specialists are dedicated to the design and manufacture Heatsink Bearing: Length: of cooling solutions to match our FE1575 12V Features: 1.9 2-Ball 16.5 customers specific thermal issues, 300 mm (+/-20) * High efficiency aluminum elliptical fin design quickly and cost-effectively. Airflow: FF1575 5V provides low pressure-drop characteristics Connector: 6.40 CFM Optional Features of our services include: Molex 22-01-3037 * Constructed of forged aluminum AL6063 for Thermal FE1576 12V Noise: * Free engineering consultation 1.8 Interface 22.1 optimum heat transfer 25.0 dBa Pin 1: 1.90 Material LW FF1576 5V * Complimentary thermal analysis Speed: Ground (Black) * Ideal for linear air flow environments x +K01 +T710 2.28 2.4 (computational fluid dynamics 6,000 RPM 2.00 FE1577 12V and design simulation/modeling) * Designed specifically for BGAs and other LW = Length & Width of Heatsink Pin 2: Size: 1.0 28.4 surface mount packages + Voltage Input H = Overall Height of Heatsink * Wide range of technologies 40 x 10mm FF1577 5V including: investment casting; K = Keep-Out Area* (2.5mm) (Red) H * Optional EZ-Snap™ mounting clip is MTBF: die casting; precision forging; constructed of UL94-V0 rated nylon FE1578 12V 65K Hours Pin 3: skived fin; extrusions; stamped * clearance required for optional EZ Snap Clips 0.9 Alarm fin; and custom machining Power: 33.5 * Use clip tool HS8063 to attach or remove FF1578 5V 1.1 Watts (Yellow or White) heatsink assembly directly to BGA chip * Rapid prototyping services to deliver concept models in as TM * Finished with black anodize plating little as 2-5 business days and EZ Snap Mounting Clip working prototypes in 1-3 weeks * Selected clip & thermal pad options are pre- CLIPS DIRECTLY TO BGA CHIP WITH HS8063 CLIP TOOL assembled at the factory See page 2 for fitting chip heights. Consult factory for unique chip height requirements Contact Radian Heatsinks to discuss Notes: your specific requirement today. 1) Add suffix “+T710” to designate thermally conductive phase change pad (Chomerics Part # T710). 2) Mounting clips are constructed of UL94-VO rated nylon material and black in color. 3) Thermal data provided is for reference only. Actual cooling performance may vary by application. Chip Height 4) Specifications are subject to change without notice. * Contact Radian to discuss unique heatsink, clip and interface requirements. Radian Heatsinks Minimum 0.3mm clearance Radian Heatsinks A division of Intricast Co., Inc. A division of Intricast Co., Inc. of chip above the board www.radianheatsinks.com www.radianheatsinks.com BUY ON-LINE AT: radian BUY ra ON-LINE diAa T: n Note 1: Chip height measurements exclude ball dimensions (0.3mm) Note 2: Chip must have 0.3mm clearance above the board for clip to adhere properly www.radianstore.com www.radianstore.com ISO 9001:2000 Certified ISO 9001:2000 Certified Note 3: Maintain keep-out clearance of 2.5mm around chip for clip to adhere properly radiansales@radianheatsinks.com radiansales@radianheatsinks.com tel: (800) 689-2802 fax: (408) 988-0683 tel: (800) 689-2802 fax: (408) 988-0683 FC & FD INM-W Series (1) (1) Part Number Part Number Series Thermal Resistance Length & Length & Elliptical Fin Aluminum Thermal Optional Optional Fansink Optional Mounting Clip Optional Mounting Clip Theta_SA (C/W) Active BGA Heatsinks Width of Heatsink Width of Heatsink Resis- Thermal Thermal BGA Heatsink Heatsink Fansink Voltage Optional Fits Chip Heatsink Part Fits Chip Weight 100 200 400 600 Tape/Pad Height Heatsink Tape/Pad Height tance (3) (2) (mm) Part # Input Mounting Clip Heights (mm) Part # Fan Spec (mm) Part Number Number Heights (mm) Part # (g) LFM LFM LFM LFM (mm) Theta_SA Harness Spec (mm) Passive BGA Cooler Products: Passive BGA Cooler Products: INM19001-15W/2.6 14.6 6.2 10.2 7.2 5.3 4.5 +3M8815 O 0.6-1.2* HS1800 Series: INM19001-18W/2.6 17.6 6.8 9.6 6.7 4.8 3.9 0.4-1.0* K25B HS1800 Series: -or- -or- Bearing: Length: INM19001-21W/2.6 20.6 7.4 7.9 5.5 4.0 3.3 21-45mm plate fin (aluminum) ideal for -or- -or- 19 21-45mm plate fin (aluminum) ideal BU 1.4-2.0* Vapo INM19001-23W/2.6 22.6 7.8 6.7 4.7 3.5 2.9 300 mm (+/-20) linear air flow 0.6-1.2* -or- -or- K51B for linear air flow INM19001-28W/2.6 27.6 8.8 6.0 4.3 3.1 2.6 +T710 Airflow: Y 3.0-3.6* -or- FC35 12V INM19001-33W/2.6 32.6 9.8 5.5 3.9 2.9 2.4 INL Series: Connector: 4.90 CFM 1.3-1.9* INM21001-15W/2.6 14.6 7.2 9.5 6.6 4.8 4.0 INL Series: K25A 27-37.5mm plate fin (aluminum) ideal +3M8815 O 0.6-1.2* Molex 22-01-3037 +3M8815 INM21001-18W/2.6 17.6 7.8 7.8 5.4 4.0 3.3 27-37.5mm plate fin (aluminum) ideal -or- -or- -or- for linear air flow Noise: INM21001-21W/2.6 20.6 8.4 6.6 4.7 3.5 2.7 -or- for linear air flow 1.4-2.1* K52B BU 1.4-2.0* 25.0 dBa 21 INM21001-23W/2.6 22.6 8.8 6.0 4.3 3.2 2.7 INM-W Series Pin 1: -or- -or- -or- 16.7 2.3 C/W 35 INM21001-28W/2.6 27.6 9.8 5.5 3.8 2.9 2.5 19-45mm elliptical fin (aluminum) +T710 HS2000-60 Series: Ground (Black) Speed: Y 3.0-3.6* 2.1-2.7* K35B INM21001-33W/2.6 32.6 10.8 4.5 3.2 2.5 2.1 ideal for linear airflow and where 21-45mm round pin (aluminum) ideal -or- 9,500 RPM INM23001-15W/2.6 14.6 8.7 7.8 5.4 3.9 3.2 -or- O 0.6-1.2* +3M8815 for omni directional air flow multiple heatsinks are utilized Pin 2: INM23001-18W/2.6 17.6 9.4 6.4 4.4 3.2 2.6 2.3-2.9* -or- -or- K29B Size: INM23001-21W/2.6 20.6 10.0 5.5 3.8 2.8 2.3 + Voltage Input -or- HS2000-60 Series: BU 1.4-2.0* HS2000-80 Series: -or- 30 x 6mm 23 INM23001-23W/2.6 22.6 10.5 5.0 3.5 2.5 2.1 21-45mm round pin (aluminum) ideal -or- -or- (Red) 3.0-3.6* 21-45mm round pin (aluminum) ideal FD35 5V K53B INM23001-28W/2.6 27.6 11.6 4.4 3.1 2.3 2.0 +T710 MTBF: for omni directional air flow Y 3.0-3.6* +T710 for omni directional air flow INM23001-33W/2.6 32.6 12.7 3.8 2.7 2.0 1.8 -or- 65K Hours Pin 3: INM25001-15W/2.6 14.6 9.7 6.9 4.6 3.3 2.6 HS2000-80 Series: 3.2-3.8* K29A O 0.6-1.2* +3M8815 INM-P Series: INM25001-18W/2.6 17.6 10.4 5.6 3.8 2.7 2.2 21-45mm round pin (aluminum) ideal Tachometer Power: -or- -or- -or- INM25001-21W/2.6 20.6 11.1 4.8 3.3 2.4 1.9 27-42.5mm round pin (aluminum) -or- for omni directional air flow 3.9-4.5* 0.9 Watts BU 1.4-2.0* (Yellow or White) 25 K53A INM25001-23W/2.6 22.6 11.6 4.4 3.0 2.2 1.8 ideal for omni-directional air flow -or- -or- INM-P Series: INM25001-28W/2.6 27.6 12.7 3.9 2.7 2.0 1.7 +T710 Y 3.0-3.6* INM-PCU Series: INM25001-33W/2.6 32.6 13.9 3.3 2.4 1.8 1.5 27-42.5mm round pin (aluminum) ideal Bearing: Length: K27B 0.3-0.9* INM27001-15W/2.6 14.6 11.0 6.7 4.5 3.2 2.7 19-42.5mm round pin (copper) ideal O 0.6-1.2* for omni-directional air flow Vapo 300 mm (+/-20) +3M8815 -or- -or- -or- INM27001-18W/2.6 17.6 11.8 5.5 3.7 2.6 2.2 for omni directional air flow K54B 0.6-1.2* INM27001-21W/2.6 BU 1.4-2.0* 20.6 12.6 4.7 3.1 2.3 1.9 INM-PCU Series: Airflow: -or- 27 -or- -or- Connector: INM27001-23W/2.6 22.6 13.1 4.2 2.9 2.1 1.8 -or- Small Round Pin: 19-42.5mm round pin (copper) ideal for 4.90 CFM +3M8815 K32 2.3-2.9 FC40 12V INM27001-28W/2.6 27.6 14.5 3.8 2.7 2.0 1.7 K27A -or- -or- +T710 omni directional air flow 1.2-1.8* Molex 22-01-3037 12.7-25.4mm round pin (aluminum) INM27001-33W/2.6 32.6 15.8 3.3 2.3 1.8 1.5 Noise: -or- Y 3.0-3.6* ideal for omni directional air flow Small Round Pin: INM29001-15W/2.6 14.6 12.5 6.8 4.4 3.1 2.5 25.0 dBa K55B Pin 1: 1.4-2.0* O 0.6-1.2* +3M8815 INM29001-18W/2.6 17.6 13.3 5.9 3.9 2.8 2.3 12.7-25.4mm round pin (aluminum) 37.5004 Series: -or- -or- -or- Ground (Black) INM29001-21W/2.6 20.6 14.1 4.9 3.3 2.3 1.9 Speed: ideal for omni directional air flow 29 -or- BU 1.4-2.0* 37.5mm round pin (aluminum or K36B -or- 16.7 2.0 C/W 40 2.1-2.7* INM29001-23W/2.6 22.6 14.6 4.2 2.8 2.0 1.7 9,500 RPM -or- -or- 37.5004 Series: copper) ideal for omni directional air -or- INM29001-28W/2.6 +T710 27.6 16.0 3.8 2.5 1.8 1.5 Pin 2: Y 3.0-3.6* 37.5mm round pin (aluminum or copper) Size: INM29001-33W/2.6 32.6 17.3 3.4 2.3 1.7 1.4 K30B flow 2.3-2.9* + Voltage Input INM31001-15W/2.6 14.6 15.3 5.2 3.3 2.3 1.8 ideal for omni directional air flow 30 x 6mm -or- +3M8815 O 0.6-1.2* Pushpin Heatsinks: (Red) INM31001-18W/2.6 17.6 16.7 4.3 2.7 1.9 1.5 K56B -or- -or- 3.0-3.6* Pushpin Heatsinks: FD40 5V +T710 MTBF: INM31001-21W/2.6 20.6 18.0 3.6 2.3 1.7 1.4 Pushpin heatsinks (aluminum) ideal 31 -or- -or- BU 1.4-2.0* Pushpin heatsinks (aluminum) ideal for INM31001-23W/2.6 22.6 18.9 3.3 2.1 1.5 1.3 65K Hours Pin 3: for linear air flow -or- -or- K30A 3.2-3.8* linear air flow INM31001-28W/2.6 +T710 27.6 21.1 2.9 1.9 1.4 1.2 Tachometer Y 3.0-3.6* -or- Power: INM31001-33W/2.6 32.6 23.4 2.5 1.7 1.2 1.0 Custom Design and (Yellow or White) INM33001-15W/2.6 14.6 17.8 5.5 3.4 2.2 1.7 0.9 Watts O 0.6-1.2* K56A 3.9-4.5* Custom Design and +3M8815 -or- -or- INM33001-18W/2.6 17.6 19.2 4.8 2.9 1.9 1.4 Manufacturing Services: BU 1.4-2.0* Manufacturing Services: INM33001-21W/2.6 20.6 20.5 3.9 2.4 1.5 1.1 -or- -or- -or- Our experienced engineers and 33 Bearing: Length: INM33001-23W/2.6 22.6 21.4 3.3 1.9 1.3 0.9 Our experienced engineers and K33 2.3-2.9 K41B 0.3-0.9* production specialists are dedicated INM33001-28W/2.6 27.6 23.6 2.9 1.7 1.1 0.8 2-Ball -or- -or- +T710 production specialists are dedicated 300 mm (+/-20) to the design and manufacture INM33001-33W/2.6 32.6 25.9 2.5 1.5 1.0 0.7 Y 3.0-3.6* to the design and manufacture -or- Airflow: INM35001-15W/2.6 14.6 20.9 4.5 2.9 2.1 1.7 of cooling solutions to match our O 0.6-1.2* +3M8815 FC42.5 12V Connector: of cooling solutions to match our -or- -or- INM35001-18W/2.6 17.6 22.6 3.7 2.4 1.7 1.4 +3M8815 6.40 CFM customers specific thermal issues, customers specific thermal issues, K40A 0.6-1.2* Molex 22-01-3037 INM35001-21W/2.6 BU 1.4-2.0* 20.6 23.7 3.2 2.1 1.5 1.2 -or- -or- -or- quickly and cost-effectively. Noise: 35 INM35001-23W/2.6 22.6 26.4 2.9 1.9 1.3 1.1 quickly and cost-effectively. K29 2.3-2.9 25.0 dBa INM35001-28W/2.6 +T710 27.6 29.2 2.5 1.7 1.2 1.0 -or- -or- -or- Pin 1: Features of our services include: INM35001-33W/2.6 32.6 30.9 2.2 1.5 1.0 0.8 Features of our services include: Y 3.0-3.6* Ground (Black) 20.4 1.6 C/W 42.5 Speed: INM37.5001-15W/2.6 14.6 22.2 4.2 2.7 1.9 1.6 K41A 1.2-1.8* -or- * Free engineering consultation O 0.6-1.2* +3M8815 * Free engineering consultation 6,000 RPM INM37.5001-18W/2.6 17.6 24.1 3.4 2.2 1.6 1.3 -or- -or- Pin 2: INM37.5001-21W/2.6 20.6 26.1 2.9 1.9 1.4 1.2 -or- * Complimentary thermal analysis -or- BU 1.4-2.0* * Complimentary thermal analysis Size: 37.5 INM37.5001-23W/2.6 22.6 27.4 2.7 1.7 1.3 1.1 + Voltage Input -or- -or- (computational fluid dynamics (computational fluid dynamics 40 x 10mm INM37.5001-28W/2.6 27.6 30.6 2.3 1.5 1.2 0.9 +T710 K31B 1.6-2.2* (Red) Y 3.0-3.6* and design simulation/modeling) INM37.5001-33W/2.6 32.6 33.9 2.0 1.3 1.0 0.8 and design simulation/modeling) +T710 FD42.5 5V MTBF: INM40001-15W/2.6 14.6 25.2 3.7 2.4 1.6 1.3 O 0.6-1.2* * Wide range of technologies -or- +3M8815 65K Hours Pin 3: -or- -or- INM40001-18W/2.6 17.6 27.4 3.0 1.9 1.4 1.1 * Wide range of technologies including: investment casting; INM40001-21W/2.6 BU 1.4-2.0* 20.6 29.6 2.5 1.7 1.2 0.9 Alarm including: investment casting; -or- -or- -or- Power: K31A 2.5-3.1* die casting; precision forging; 40 INM40001-23W/2.6 22.6 31.1 2.3 1.5 1.1 0.8 die casting; precision forging; (Yellow or White) K30 2.3-2.9 1.1 Watts INM40001-28W/2.6 27.6 34.7 2.0 1.3 1.0 0.8 skived fin; extrusions; stamped -or- -or- +T710 skived fin; extrusions; stamped INM40001-33W/2.6 32.6 38.4 1.7 1.2 0.8 0.7 Y 3.0-3.6* fin; and custom machining fin; and custom machining INM42.5001-15W/2.6 14.6 27.8 3.4 2.1 1.4 1.2 Bearing: Length: O 0.6-1.2* +3M8815 INM42.5001-18W/2.6 17.6 30.2 2.8 1.7 1.2 0.9 * Rapid prototyping services to -or- -or- * Rapid prototyping services to 2-Ball INM42.5001-21W/2.6 20.6 32.6 2.4 1.5 1.0 0.8 300 mm (+/-20) deliver concept models in as -or- BU 1.4-2.0* 42.5 deliver concept models in as INM42.5001-23W/2.6 22.6 34.2 2.1 1.4 0.9 0.7 -or- -or- little as 2-5 business days and Airflow: INM42.5001-28W/2.6 27.6 38.2 1.8 1.2 0.8 0.7 little as 2-5 business days and Connector: +T710 Y 3.0-3.6* working prototypes in 1-3 weeks FC45 12V 6.40 CFM K28B INM42.5001-33W/2.6 32.6 42.2 1.6 1.0 0.7 0.6 0.4-1.0* +3M8815 working prototypes in 1-3 weeks Molex 22-01-3037 INM45001-15W/2.6 14.6 31.2 3.1 1.9 1.3 1.1 Noise: O 0.6-1.2* INM45001-18W/2.6 +3M8815 17.6 34.0 2.5 1.6 1.1 0.8 Contact Radian Heatsinks to discuss Contact Radian Heatsinks to discuss -or- -or- 25.0 dBa Pin 1: INM45001-21W/2.6 20.6 36.7 2.1 1.4 0.9 0.7 your specific requirement today. 45 -or- your specific requirement today. BU 1.4-2.0* INM45001-23W/2.6 22.6 38.6 1.9 1.2 0.8 0.7 Ground (Black) Speed: -or- -or- 20.4 1.5 C/W INM45001-28W/2.6 27.6 43.2 1.7 1.1 0.7 0.6 45 -or- -or- +T710 6,000 RPM Y 3.0-3.6* INM45001-33W/2.6 32.6 47.8 1.4 0.9 0.7 0.5 Pin 2: Size: + Voltage Input Notes: 40 x 10mm (Red) 1) Example Part Numbers: K28A FD45 5V 1.3-1.9* +T710 MTBF: INM27001-15W/2.6 27 x 14.6mm Heatsink Only Pin 3: 65K Hours INM35001-18W/2.6O 35 x 17.6mm Heatsink with “O” (orange) mounting clip (0.6-1.2mm Chip Height) INM40001-15W/2.6+3M8815 40 x 14.6mm Heatsink with 3M8815 thermal tape Alarm Power: INM42.5001-28W/2.6BU+T710 42.5 x 27.6mm Heatsink with “BU” (blue) mounting clip for 1.4-2.0mm chip heights and T710 thermal pad Radian Heatsinks (Yellow or White) Radian Heatsinks 1.1 Watts 2) Optional thermal interface materials are defined as follows: A division of Intricast Co., Inc. A division of Intricast Co., Inc. T710 - Thermally conductive phase change pad for use with mounting clip (Chomerics Part # T710) www.radianheatsinks.com 3M8815 - Thermally conductive adhesive tape www.radianheatsinks.com Notes: 3) Mounting clips are constructed of UL94-VO rated nylon material. 1) Add suffix “+T710” to designate thermally conductive phase change pad (Chomerics Part # T710). 4) Thermal data provided are for reference only. Actual cooling performance may vary by application. 2) Mounting clips are constructed of UL94-VO rated nylon material and black in color. BUY ON-LINE AT: 5) Contact Radian to discuss unique heatsink, clip and interface requirements. radian 3) Thermal data provided are for reference only. Actual cooling performance may vary by application. BUY ON-LINE AT: radian 4) Specifications are subject to change without notice. 6) Specifications are subject to change without notice. www.radianstore.com www.radianstore.com 5) 27mm size available, contact Radian for specifications ISO 9001:2000 Certified *Contact Radian for mounting clips to fit chip heights not displayed above. ISO 9001:2000 Certified * Contact Radian to discuss unique heatsink, clip and interface requirements. radiansales@radianheatsinks.com radiansales@radianheatsinks.com tel: (800) 689-2802 fax: (408) 988-0683 tel: (800) 689-2802 fax: (408) 988-0683