RADCOM’s Platform Specifications Valid from Version 7.10 ©RADCOM Ltd., November 2006 IP Notices: © 2006 RADCOM Ltd. All rights reserved. RADCOM is a trademark of RADCOM Ltd. in Israel and/or other countries. Microsoft ® Windows ® and Microsoft® Windows NT ® are registered trademarks or of Microsoft Corporation in the US and/ or other countries. All other brand and product names referred to herein are either registered or unregistered trademarks or service marks belonging to their respective owners. This documentation contains proprietary information of RADCOM Ltd. and RADCOM Equipment Inc. Such information is hereby supplied solely for the purpose of informing explicitly and properly authorized persons of the documentation on the operation of RADCOM equipment. Without the express prior written permission of RADCOM Ltd. and RADCOM Equipment Inc., no part of the contents hereof may be used for any other purpose, disclosed to persons or firms outside the recipient company, or reproduced by any means. The text and drawings herein are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice. Publication Date: November 2006 Table of Contents Safety Precautions 2 Lithium Battery Warning 3 Installing in a Rack Mount (R1000, R4000 and R70) 3 Site Requirements 4 Performer R1000 Unit 5 Specifications: R1000, Rack-mount 2U, Performer/Probe Server 5 Performer P1000 Unit 7 Specifications: P1000, Portable Performer Server 7 Performer R4000 Unit 10 Specifications: R4000, Rack-mount 5U, Probe 10 R70 Probe 14 Specifications: R70, Rack-mount 2U 14 RADCOM’s Platform Specifications Safety Precautions NOTE Adhere to the following safety precautions to reduce the risk of electric shock or fire. • All servicing of the Performer and R70 units should be undertaken only by qualified service personnel. There are no user serviceable parts inside the Performer. Contact your local representative for information concerning repair. • The Performer and R70 operate with 100V-240V AC. • Connect the Performer/R70 to a wall power socket with a voltage of 100V- 240V AC only. • Do not plug in, turn on or attempt to operate an obviously damaged unit. Contact your local representative to arrange the return of a damaged unit. • Permanent damage may be caused to the Performer/R70 if the stated clearance requirements on the side and underneath the Performer are not met. • Do not operate the unit if the maximum ambient temperature exceeds 40º C (104° F). • Do not attempt to open the unit’s case. Consult your representative about any changes to be made to the hardware configuration. Maximum Load Permitted • The R1000 and P1000 have 4 PCI card slots. Slots 1, 2 and 3 are located on the left side of the backplane, and the fourth (PCI 4) is located on other side of the backplane, above the SBC. • The maximum load for PCIs 1, 2 and 3 is 35 watts each. The PCI 4 slot is intended for a half-size PCI card. When the R1000 or P1000 include a Sync Card configuration, the Sync Card is installed in PCI slot 4. The maximum load for PCI 4 is 5W. 3 • The R4000 has four SBC segments. Each segment has 3 PCI slots (PCI slots 1, 2 and 3). The maximum load of PCI 1 and 2 is 35W each. The third slot (PCI 3) is intended for a half-size PCI card. When the R4000 includes a Sync Card configuration, the Sync Card can be installed in any segment, but is usually installed in slot 3. • The R70 can accommodate up to three LIMs of any type. Lithium Battery Warning DANGER • Risk of explosion if battery is replaced by an incorrect type. • Before battery replacement, turn off the unit and disconnect the power cord from the unit. • Dispose of used batteries according to instructions. Lithium Battery Warning • The SBC includes a lithium battery. There is danger of explosion if the battery is incorrectly replaced. If you have to replace the lithium battery, replace only with the same or equivalent type of battery. Recycling Lithium Batteries ! CAUTION Do not handle damaged or leaking the lithium batteries. You can help preserve the environment by returning your used batteries to your nearest collection and recycling location. For more information regarding rechargeable batteries, visit http://www.rbrc.org/. Installing in a Rack Mount (R1000, R4000 and R70) • Install the Performer/R70 on rack mount slides and fasten the unit’s rack mount brackets with screws to the cabinet. • Make sure that you have free access to the power cord plug (to plug in and unplug the unit). • Make sure that the rack is ventilated RADCOM’s Platform Specifications 4 Site Requirements Before unpacking your Performer/R70, verify compliance with the following conditions: ! CAUTION Permanent damage may be caused to the Performer/R70 if the following requirements are not met: Power Your Performer/R70 should be installed within 1.5 m (5 ft.) of an easily-accessible grounded AC outlet capable of supplying 100V-240V AC ±10%. Side and Allow at least 10 cm (4 inches) clearance on each Bottom side of the Performer/R70 for proper ventilation. Clearance The Performer/R70 should be placed on a hard, flat surface in order to avoid obstruction of the ventilation slits. External Normal conditions: Environment •Temperature: 22º C +/- 2º C •Humidity: 50% relative humidity +/- 5% Extreme conditions: •Temperature: 0-45º C •Relative humidity: 10-90% 3 •Absolute humidity: less than 25g/m 3 •Dust: up to 75 mg/m AC Voltage Voltage: Nominal Value 100V, 220V Source Range of Variation 90V-264V Frequency: Nominal Value 50Hz Range of Variation 48Hz-52Hz Form Factor: Nominal Value 1.11 Range of Variation 1.08 - 1.14 Harmonic Distortion: max. 5% DC Voltage Power: Distribution cabinet supplying Source (nominal) –48V DC Range of variation 42V to –56V RADCOM’s Platform Specifications 5 Performer R1000 Unit Specifications: R1000, Rack-mount 2U, Performer/Probe Server • HW: Pentium 4, 2.4Ghz; 1 GB DDR, 266 MHz; 80 GB Hard disk • Number of FEPs: Up to 2, plus Sync card • Dimensions: w x d x h: 440 x 470 x 89 mm (17.5 x 18.7 x 3.5 in). • Weight: 9.2 Kg (20.3 lb) • Power: 100V – 240V AC auto-range, Maximum 300W. External Normal conditions: Environment •Temperature: 22º C +/- 2º C •Humidity: 50% relative humidity +/- 5% Extreme conditions: •Temperature: 0-45º C •Relative humidity: 10-90% 3 •Absolute humidity: less than 25g/m 3 •Dust: up to 75 mg/m Altitude: 12,000 feet MTBF 38,000 hours The back and front panels of the Performer Rack Mount R1000 unit appear as follows: Back Panel COM1 Slot for Sync Card Power 2 LIMs Switch Power Supply Fan Ethernet Management Port Mouse/Keyboard VGA Ethernet SIPSim Port Figure 1: Performer R1000; back panel RADCOM’s Platform Specifications 6 Front Panel Hard disk drive activity Power on/off Keyboard/ USB Front panel door mouse Figure 2: Performer R1000; front panel Inside the front panel door are the red reset button, the yellow shutdown button, the black power switch and the CD-ROM. Use the black power switch to turn the Performer unit on. The red reset button resets the Performer, only use this button if the system freezes. Use the yellow shutdown button to execute a proper software shut down and to turn off the Performer properly. You should only use the yellow button to turn off the Performer unit. To run the R1000: 1. Connect the power cable. 2. Turn on the switch at the back of the unit. 3. Open the front door panel. 4. Press the black button. RADCOM’s Platform Specifications 7 Performer P1000 Unit Specifications: P1000, Portable Performer Server • HW: Pentium 4, 2.4Ghz; 1 GB DDR, 266 MHz; 80 GB Hard disk • Number of FEPs: Up to 3, plus Sync card • Dimensions: w x d x h: 340 x 420 x 116 mm (13.4 x 16.5 x 4.6 in). • Weight: 8.2 Kg (18.0 lb) • Power: 100V – 240V AC auto-range, Maximum 300W. External Normal conditions: Environment •Temperature: 22º C +/- 2º C •Humidity: 50% relative humidity +/- 5% Extreme conditions: •Temperature: 0-45º C •Relative humidity: 10-90% 3 •Absolute humidity: less than 25g/m 3 •Dust: up to 75 mg/m Altitude: 12,000 feet MTBF 38,000 hours The P1000 unit is the portable version of the Performer. You can position this both in a horizontal position and a vertical position. The P1000 unit comes with a unique carrying case with space for the LIMs and appropriate cables, which you can order separately. RADCOM’s Platform Specifications 8 Sync Card Reset Software shutdown Power Switch HDD LED W CD-Rom R/ 3 LIMs Handles Ethernet Management Port 2 USB ports VGA Ethernet SIPSim Port Keyboard/mouse Figure 3: P1000 Horizontal, front view Power Supply Power Cable plug Fans Figure 4: P1000 Horizontal Rear View RADCOM’s Platform Specifications 9 Figure 5: P1000, Front View, vertical RADCOM’s Platform Specifications 10 Performer R4000 Unit Specifications: R4000, Rack-mount 5U, Probe Consists of 4 independent segments, each including: • HW: Pentium 4, 2.4Ghz; 1 GB DDR RAM, 266 MHz; 80 GB Hard disk; 7200 RPM • Number of FEPs: Up to 8, plus four Sync cards (one per segment) • Dimensions: w x d x h = 430 x 680 x 220 mm (17 x 27 x 8.7 in) • Weight: 30 Kg (66.25 lb) • Power: 100V – 240V AC auto-range, Maximum 1000W. • Power dissipation 800 W • Input power 100-260 VAC • Installation Rack mount 19” (21” option) • Mean Time Between Faliure: 18,000 hours • Operating system: Microsoft Windows XP External Normal conditions: Environment •Temperature: 22º C +/- 2º C •Humidity: 50% relative humidity +/- 5% Extreme conditions: •Temperature: 0-45º C •Relative humidity: 10-90% 3 •Absolute humidity: less than 25g/m 3 •Dust: up to 75 mg/m Altitude: 12,000 feet MTBF 20,000 hours RADCOM’s Platform Specifications 11 The Performer R4000 unit consists of four Performer segments in one box. The back and front panels of the Performer R4000 Rack Mount unit appear as follows: Power LEDs for each segment Fan 1 Fan 2 Power HDD LEDs for each segment Power 1 and 2 (redundant) Temperature Figure 6: R4000 unit, front view 8 7 6 1 3 2 5 4 Figure 7: R4000 front view with door open RADCOM’s Platform Specifications 12 Number Explanation 1 Power supply for each segment 2 4 reset buttons (one for each segment) 3 Power button 4Key 5 4 hard disks (and a spare one) 6 Future place for CD-ROM and USB 7 Momentary power switch for each segment 8 Power reset 8 7 1 6 5 234 Figure 8: Performer R4000 back view RADCOM’s Platform Specifications 13 Number Explanation 12 USB ports 2 2 LIMs for each segment 3 Power supply 4 Power switch 5 Ethernet Management Port 6 Ethernet SIPSim Port 7VGA 8 Keyboard/mouse All of the above elements (apart from the power supply and power switch) appear for each segment. RADCOM’s Platform Specifications 14 R70 Probe Specifications: R70, Rack-mount 2U • HW: RADCOM’s proprietary embedded high-end solution • Number of PIMs (plug-in modules): up to 4 • Number of LIMs (line interface modules): up to 3 • Synchronization methods supported: GPS, NTP and local synchronization • Dimensions: w x d x h: 440 x 540 x 89 mm (17.5 x 21.3 x 3.5 in). • Weight: 8 kg (17.6 lb) • Power: 100V – 240V AC auto-range, Maximum 180W; Single or dual power supply (redundancy mode). • Power: – 48V DC, Maximum 180W; Single or dual power supply (redundancy mode). External Normal conditions: Environment •Temperature: 22º C +/- 2º C •Humidity: 50% relative humidity +/- 5% Extreme conditions: •Temperature: 0-55º C •Relative humidity: 10-90% 3 •Absolute humidity: less than 25g/m 3 •Dust: up to 75 mg/m Altitude: 12,000 feet MTBF •38,000 hours single AC or DC power supply •43,000 hours dual AC or DC power supply To run the R70, connect the power cable and press the power button on the right side of the front panel. To shut off the R70, press the power button. Following are several views of the R70: RADCOM’s Platform Specifications 15 Figure 9: R70 Front View Power LIM #3 LIM #1 LIM #2 Figure 10: R70 with LIMs Displayed RADCOM’s Platform Specifications 16 1 2 10 3 9 8 7 4 6 5 Figure 11: R70 Rear View Number Explanation 1 Power Supply 2Sync Out 3Sync In 4 Sync Status LEDs 5 GPS Antenna Connector 6 GPS Status LEDs 7 Power Inlet 8 10/100/1000 Ethernet Management Port 9 RS-232 Port 10 Inter-Probe Connection Ports RADCOM’s Platform Specifications 17 PIMs Figure 12: R70 Inside View RADCOM’s Platform Specifications US Office: RADCOM Equipment Inc. 6 Forest Avenue, Paramus, NJ 07652, USA Tel: (201) 518-0033 or 1-800-RADCOM-4, Fax: (201) 556-9030 E-mail: info@radcomusa.com Israel Office: RADCOM Ltd. 24 Raoul Wallenberg St., Tel Aviv, 69719, Israel Tel: 972-3-6455055, Fax: 972-3-6474681 E-mail: info@radcom.com China Office: RADCOM Ltd. Handerson Center, Office 506, Tower 3, 18 Jianguomennei Avenue, Beijing 1000005, P.R. China Tel: +86-10-65187723, Fax: +86-10-65187721 E-mail: china@radcom.com United Kingdom Office: RADCOM UK 2440 The Quadrant Aztec West, Almondsbury Bristol, BS32 4AQ England Tel: +44-145-487-8827, Fax: +44-145-487-8788 E-mail: uk@radcom.com Web Site: http://www.radcom.com ©RADCOM 2006