the Performer Analyzer the thePerformer Performer H i g h P e r f o r m a n c e A n a l y z e r A n a l y z e r P r o t o c o l A n a l y z e r Specifications Specifications PerformerLite Portable Configuration Time synchronization System includes display, keyboard and pointing device. All FEPs within a Performer analyzer are synchronized Operating System: Windows XP. CPU: Intel Pentium 4 2.0 Ghz Modes: Local and global (GPS) RAM: 1 Gbyte. Hard Disk: 80 Gbyte (minimum) Synchronization sources and accuracy: FEPs: up to 3, plus sync card Local master 150 nanoseconds Dimensions: (d x w x h) 171 x 401 x 259 mm (6.7 x 16 x 10.2 in) Global (GPS) 150 nanoseconds Weight: 8.18 kg (18 lb). Power supply: Maximum 110V/2A, Global (NTP) 10 milliseconds 220V/1A Supported Protocols (sample list) Performer R1000 2U Rack-mount Configuration DataCom Protocols: CPU: Intel Pentium 4, 2.4 Ghz TCP/IP: BGP4, FTP, HTTP, ICMP, IGMP, IP, IPv6, L2TP, MGCP, RAM: 1 GByte. Hard Disk: 80 Gbyte (minimum) MGCP/SGCP, MPLS, NTP, OSPF. FEPs: up to 2 plus sync card ATM: ATM Signaling, ILMI, IP/ATM, LE 802.3, MPLS/ATM, OAM 2U, 19” rack-mount configuration F4, OAM F5, PNNI routing. Dimensions: (d x w x h) 470 x 440 x 88 mm (18.7 x 17.5 x 3.5 in) Frame Relay: DCP, FR/ATM, GPRS (NS/FR), IP/X.25/LAPB/FR. Weight: 9 kg (19.9 lb). PPP: DNCP, IPCP, IPv6CP, OSINLCP, PoS, PPP, PPPoE, SNACP. Power supply: Maximum 300W Cellular Protocols: ETSI R97, R98; 3GPP R99, R4, R5; 3GPP2 IOS 3.x and 4.x. Performer R4000 5U Rack-mount Configuration GSM/GPRS: BISUP, ISUP, INAP, DUP, MTP2, MTP3, SCCP, TCAP, Consists of 4 segments each including: TUP, M2UA,M3UA, SCTP, M2PA, GMM/SM, SMS. CPU: Intel Pentium 4 2,.4 Ghz UMTS: CM/SM/MM, SMS, SMSCB, RLP, SS, MAC, RLC, PDCP, BMC, RAM: 1 GByte. Hard Disk: 80 Gbyte (minimum) RRC,RANAP, Iu-UP, RNSAP, FP, NBAP, AMR, MAP ,BSSAP+, CAP. CDMA: 3GPP IOS 3.x,and IOS 4.x, IP, TCP, UDP, SCCP, MTP3, FEPs: up to 8 plus sync card MTP2, MTP1, GRE, PPP. 5U, 19” rack-mount configuration VoIP Protocols: Dimensions: (d x w x h) 680 x 430 x 220 mm (27 x 17 x 8.7 in) H.323, H.225, H.245, H.235, H.450, SIP, SIP-T, MGCP, SDP, NCP, Weight: 30 kg (66.25 lb). TGCP, Megaco, SKINNY, RTP, RTCP. Power supply: Maximum 1000W Applications GenFEP (Generic Front End Processor) Physical Layer Technologies: ATM, POS, Ethernet, WAN & IMA Capture Processor: GEAR Analysis On-board memory: 256 Mbyte (512 Mbyte - optional) Traffic Generator Processing speed: up to 2.5 Gbps Internet Consultant Loss and Latency Line interface Modules (LIMs) Multi-technology Protocol Analyzer at Ethernet: Dual port copper 10/100/1000 and single port fiber optic GbE. Console PC Requirements PC: Pentium III 1Ghz, 512 MB RAM or more ATM: OC3/12 (STM1/4), OC48 (STM16), Multi port Full Line Rate for (recommended) ATMoE1/T1/J1, Dual port ATMoE3/DS3, IMA (Inverse Multiplexing ATM) Monitor: VGA 1024 x 768 LAN/WAN/ATM/PoS/Metro PoS: OC3/12 (STM1/4), OC48 (STM16) Hard Disk: Minimum 4 GB free for program files WAN: Multi port E1/T1/J1 At least 2 GB recommended for V-series: V.24/RS-232, V.35, V.36/RS-449 and X.21 data storage Operating System: Windows 2000/XP US Office: Israel Office: China Office: United Kingdom Office: RADCOM Equipment Inc. RADCOM Ltd. RADCOM Ltd. RADCOM UK 6 Forest Avenue 24 Raoul Wallenberg Street Handerson Center, Office 506, Tower 3 2440 The Quadrant Paramus NJ 07652 USA Tel-Aviv 69719 Israel 18 Jianguomennei Avenue, Aztec West, Almondsbury Tel: (201) 518-0033 Tel: +972-3-6455055 Beijing 1000005, P.R. China Bristol, BS32 4AQ England Fax: (201) 556-9030 Fax:+972-3-6474681 Tel: +86-10-65187723 Tel: +44-145- 487 8827 1-800-RADCOM-4 e-mail: info@radcom.com Fax:+86-10-65187721 Fax: +44-145-487 8788 e-mail: info@radcomusa.com e-mail: china@radcom.com e-mail: uk@radcom.com Specifications subject to change without notice. MS-Windows is a trademark of Microsoft Corporation. Brand and product names are trademarks of the respective companies. BRO-PERFORMER ANALYZER, Revision A © copyright RADCOM, 01.2004 www.radcom.com www.protocols.com the Performer Physical Layer statistics The Performer Analyzer measures a comprehensive set of line traffic Analyzer counters and statuses per technology. Each counter/status has a dedicated user-defined threshold after which alarms are displayed and logged. Results are presented both as values, and by a series of color coded LEDs. The Performer Analyzer is a comprehensive high performance test solution for vendor R&D and QA labs, service provider QA labs and field service technicians. Based on the field- Physical Layer proven Performer platform, it integrates RADCOM's proprietary GEAR (GEneric AnalyzeR) processor chip, which provides hardware-based full line rate analysis capabilities at up to 2.5 Gbps. The complete Performer Analyzer suite offers a range of interfaces and tools for Protocol decode verification troubleshooting and monitoring LAN/WAN/ATM/PoS/Metro networks. The Performer Analyzer decodes 600 telecom and datacom protocols, including standard protocols such as ITU-T, ANSI, IETF, 3GPP and 3GPP2, and country/vendor-specific variants, as well. All layers of protocols are supported. Complex decoding such as Cellular, VoIP and Flexible, versatile and distributed GEAR (GEneric AnalyzeR) Datacom networks can be seamlessly integrated as part of the The Performer Analyzer is an ideal tool for monitoring and The independent GEAR chip, an online proprietary full- protocol decode process, with minimal hassle. The wide range of online and offline filters enable users to focus only on important data. troubleshooting performance of WAN/LAN/ATM/PoS/Metro custom ASIC chip based processor, is the core engine for A professional team is dedicated to providing instant response for new networks at all seven layers. online processing, offering hardware-based full line rate Decode emerging and customer proprietary protocols. Both portable and scalable rack-mount configurations are filters, analysis and capture capabilities at up to 2.5 Gbps. available. A distributed model allows any user to remotely access resources, optimizing test equipment usage. Network analyses and statistics Automated testing procedures use scripting tools running The Performer Analyzer provides useful analyses, including on a single Performer Analyzer or on an entire lab setup. distribution of protocols, protocol fields, station addresses, communicating pairs, frame lengths and frame status. The wide range of online filters enables users to analyze only significant data. A flexible and user-defined set of threshold-based alarms can be set to locate abnormal situations and phenomena of the network under test; while a log file schedules all events for further investigation. Powerful analysis capabilities Analysis Capturing and analyzing the traffic in real time at a full line rate of up to 2.5 Gbps, the Performer Analyzer offers GenFEP Live network protocol generation both predefined and user-defined analyses and filters to (Generic Front-End-Processor) The Performer Analyzer generates pre-capture live network traffic on allow fast realization of traffic characteristics and The new all-in-one GenFEP offers a protocol, technology a variety of interfaces. A unique protocol & message driven editor pinpointing of abnormal conditions at different layers, offers flexibility of packet timing, protocol stack & flow, protocol and rate independent hardware solution. One FEP for all fields, station addresses and payloads. Users can utilize the regardless of the interface types and protocols. technologies and protocols makes the GenFEP a worthwhile combination of more than 330 messages in over 40 protocols to create The Performer Analyzer offers an extensive set of physical a wide variety of customized messages. Full line rate, at up to investment for any customer, saving the cost of ownership. 2.5Gpbs, as well as a set of pre-defined traffic distribution models, and link layer measurements, which monitor network are guaranteed. efficiency. Session-level analysis of applications and Traffic Generator services offer a simple, intuitive and powerful Multi-technology, multi-port and multi-slot troubleshooting tool. The Performer Analyzer offers wide technology support, ranging from as low as 1.544 Mbps E1 rates, through all commonly used Session level signaling & user data analysis LAN/WAN/ATM/PoS/Metro technologies, and up to 2.48 Gbps OC-48 Synchronization The Internet Consultant provides online/offline session analysis and (STM16) rates. two to-eight slots are available and the multi-port Line QoS monitoring for Internet traffic, addressing issues on both the Versatile synchronization methods enable accurate and Interface Modules (LIM) offer load balancing access, high port density signaling and user planes. It focuses on the key troubleshooting issues time-dependent measurements between several Performer of Internet networks, such as signaling and user data transmission and low cost per port. problems, QoS, performance and network functioning. The Internet Analyzers in labs or at remote sites (using GPS or NTP). Consultant analyzes the various transactions on the line, providing a top-down display of sessions and network traffic, offering a unique investigating and troubleshooting tool for infrastructure problems related to configuration or capacity. Internet Consultant a ac cc ce elle er ra at te ed d G Ge ea ar r the Performer Physical Layer statistics The Performer Analyzer measures a comprehensive set of line traffic Analyzer counters and statuses per technology. Each counter/status has a dedicated user-defined threshold after which alarms are displayed and logged. Results are presented both as values, and by a series of color coded LEDs. The Performer Analyzer is a comprehensive high performance test solution for vendor R&D and QA labs, service provider QA labs and field service technicians. Based on the field- Physical Layer proven Performer platform, it integrates RADCOM's proprietary GEAR (GEneric AnalyzeR) processor chip, which provides hardware-based full line rate analysis capabilities at up to 2.5 Gbps. The complete Performer Analyzer suite offers a range of interfaces and tools for Protocol decode verification troubleshooting and monitoring LAN/WAN/ATM/PoS/Metro networks. The Performer Analyzer decodes 600 telecom and datacom protocols, including standard protocols such as ITU-T, ANSI, IETF, 3GPP and 3GPP2, and country/vendor-specific variants, as well. All layers of protocols are supported. Complex decoding such as Cellular, VoIP and Flexible, versatile and distributed GEAR (GEneric AnalyzeR) Datacom networks can be seamlessly integrated as part of the The Performer Analyzer is an ideal tool for monitoring and The independent GEAR chip, an online proprietary full- protocol decode process, with minimal hassle. The wide range of online and offline filters enable users to focus only on important data. troubleshooting performance of WAN/LAN/ATM/PoS/Metro custom ASIC chip based processor, is the core engine for A professional team is dedicated to providing instant response for new networks at all seven layers. online processing, offering hardware-based full line rate Decode emerging and customer proprietary protocols. Both portable and scalable rack-mount configurations are filters, analysis and capture capabilities at up to 2.5 Gbps. available. A distributed model allows any user to remotely access resources, optimizing test equipment usage. Network analyses and statistics Automated testing procedures use scripting tools running The Performer Analyzer provides useful analyses, including on a single Performer Analyzer or on an entire lab setup. distribution of protocols, protocol fields, station addresses, communicating pairs, frame lengths and frame status. The wide range of online filters enables users to analyze only significant data. A flexible and user-defined set of threshold-based alarms can be set to locate abnormal situations and phenomena of the network under test; while a log file schedules all events for further investigation. Powerful analysis capabilities Analysis Capturing and analyzing the traffic in real time at a full line rate of up to 2.5 Gbps, the Performer Analyzer offers GenFEP Live network protocol generation both predefined and user-defined analyses and filters to (Generic Front-End-Processor) The Performer Analyzer generates pre-capture live network traffic on allow fast realization of traffic characteristics and The new all-in-one GenFEP offers a protocol, technology a variety of interfaces. A unique protocol & message driven editor pinpointing of abnormal conditions at different layers, offers flexibility of packet timing, protocol stack & flow, protocol and rate independent hardware solution. One FEP for all fields, station addresses and payloads. Users can utilize the regardless of the interface types and protocols. technologies and protocols makes the GenFEP a worthwhile combination of more than 330 messages in over 40 protocols to create The Performer Analyzer offers an extensive set of physical a wide variety of customized messages. Full line rate, at up to investment for any customer, saving the cost of ownership. 2.5Gpbs, as well as a set of pre-defined traffic distribution models, and link layer measurements, which monitor network are guaranteed. efficiency. Session-level analysis of applications and Traffic Generator services offer a simple, intuitive and powerful Multi-technology, multi-port and multi-slot troubleshooting tool. The Performer Analyzer offers wide technology support, ranging from as low as 1.544 Mbps E1 rates, through all commonly used Session level signaling & user data analysis LAN/WAN/ATM/PoS/Metro technologies, and up to 2.48 Gbps OC-48 Synchronization The Internet Consultant provides online/offline session analysis and (STM16) rates. two to-eight slots are available and the multi-port Line QoS monitoring for Internet traffic, addressing issues on both the Versatile synchronization methods enable accurate and Interface Modules (LIM) offer load balancing access, high port density signaling and user planes. It focuses on the key troubleshooting issues time-dependent measurements between several Performer of Internet networks, such as signaling and user data transmission and low cost per port. problems, QoS, performance and network functioning. The Internet Analyzers in labs or at remote sites (using GPS or NTP). Consultant analyzes the various transactions on the line, providing a top-down display of sessions and network traffic, offering a unique investigating and troubleshooting tool for infrastructure problems related to configuration or capacity. Internet Consultant a ac cc ce elle er ra at te ed d G Ge ea ar r the Performer Analyzer the thePerformer Performer H i g h P e r f o r m a n c e A n a l y z e r A n a l y z e r P r o t o c o l A n a l y z e r Specifications Specifications PerformerLite Portable Configuration Time synchronization System includes display, keyboard and pointing device. All FEPs within a Performer analyzer are synchronized Operating System: Windows XP. CPU: Intel Pentium 4 2.0 Ghz Modes: Local and global (GPS) RAM: 1 Gbyte. Hard Disk: 80 Gbyte (minimum) Synchronization sources and accuracy: FEPs: up to 3, plus sync card Local master 150 nanoseconds Dimensions: (d x w x h) 171 x 401 x 259 mm (6.7 x 16 x 10.2 in) Global (GPS) 150 nanoseconds Weight: 8.18 kg (18 lb). Power supply: Maximum 110V/2A, Global (NTP) 10 milliseconds 220V/1A Supported Protocols (sample list) Performer R1000 2U Rack-mount Configuration DataCom Protocols: CPU: Intel Pentium 4, 2.4 Ghz TCP/IP: BGP4, FTP, HTTP, ICMP, IGMP, IP, IPv6, L2TP, MGCP, RAM: 1 GByte. Hard Disk: 80 Gbyte (minimum) MGCP/SGCP, MPLS, NTP, OSPF. FEPs: up to 2 plus sync card ATM: ATM Signaling, ILMI, IP/ATM, LE 802.3, MPLS/ATM, OAM 2U, 19” rack-mount configuration F4, OAM F5, PNNI routing. Dimensions: (d x w x h) 470 x 440 x 88 mm (18.7 x 17.5 x 3.5 in) Frame Relay: DCP, FR/ATM, GPRS (NS/FR), IP/X.25/LAPB/FR. Weight: 9 kg (19.9 lb). PPP: DNCP, IPCP, IPv6CP, OSINLCP, PoS, PPP, PPPoE, SNACP. Power supply: Maximum 300W Cellular Protocols: ETSI R97, R98; 3GPP R99, R4, R5; 3GPP2 IOS 3.x and 4.x. Performer R4000 5U Rack-mount Configuration GSM/GPRS: BISUP, ISUP, INAP, DUP, MTP2, MTP3, SCCP, TCAP, Consists of 4 segments each including: TUP, M2UA,M3UA, SCTP, M2PA, GMM/SM, SMS. CPU: Intel Pentium 4 2,.4 Ghz UMTS: CM/SM/MM, SMS, SMSCB, RLP, SS, MAC, RLC, PDCP, BMC, RAM: 1 GByte. Hard Disk: 80 Gbyte (minimum) RRC,RANAP, Iu-UP, RNSAP, FP, NBAP, AMR, MAP ,BSSAP+, CAP. CDMA: 3GPP IOS 3.x,and IOS 4.x, IP, TCP, UDP, SCCP, MTP3, FEPs: up to 8 plus sync card MTP2, MTP1, GRE, PPP. 5U, 19” rack-mount configuration VoIP Protocols: Dimensions: (d x w x h) 680 x 430 x 220 mm (27 x 17 x 8.7 in) H.323, H.225, H.245, H.235, H.450, SIP, SIP-T, MGCP, SDP, NCP, Weight: 30 kg (66.25 lb). TGCP, Megaco, SKINNY, RTP, RTCP. Power supply: Maximum 1000W Applications GenFEP (Generic Front End Processor) Physical Layer Technologies: ATM, POS, Ethernet, WAN & IMA Capture Processor: GEAR Analysis On-board memory: 256 Mbyte (512 Mbyte - optional) Traffic Generator Processing speed: up to 2.5 Gbps Internet Consultant Loss and Latency Line interface Modules (LIMs) Multi-technology Protocol Analyzer at Ethernet: Dual port copper 10/100/1000 and single port fiber optic GbE. Console PC Requirements PC: Pentium III 1Ghz, 512 MB RAM or more ATM: OC3/12 (STM1/4), OC48 (STM16), Multi port Full Line Rate for (recommended) ATMoE1/T1/J1, Dual port ATMoE3/DS3, IMA (Inverse Multiplexing ATM) Monitor: VGA 1024 x 768 LAN/WAN/ATM/PoS/Metro PoS: OC3/12 (STM1/4), OC48 (STM16) Hard Disk: Minimum 4 GB free for program files WAN: Multi port E1/T1/J1 At least 2 GB recommended for V-series: V.24/RS-232, V.35, V.36/RS-449 and X.21 data storage Operating System: Windows 2000/XP US Office: Israel Office: China Office: United Kingdom Office: RADCOM Equipment Inc. RADCOM Ltd. RADCOM Ltd. RADCOM UK 6 Forest Avenue 24 Raoul Wallenberg Street Handerson Center, Office 506, Tower 3 2440 The Quadrant Paramus NJ 07652 USA Tel-Aviv 69719 Israel 18 Jianguomennei Avenue, Aztec West, Almondsbury Tel: (201) 518-0033 Tel: +972-3-6455055 Beijing 1000005, P.R. China Bristol, BS32 4AQ England Fax: (201) 556-9030 Fax:+972-3-6474681 Tel: +86-10-65187723 Tel: +44-145- 487 8827 1-800-RADCOM-4 e-mail: info@radcom.com Fax:+86-10-65187721 Fax: +44-145-487 8788 e-mail: info@radcomusa.com e-mail: china@radcom.com e-mail: uk@radcom.com Specifications subject to change without notice. MS-Windows is a trademark of Microsoft Corporation. Brand and product names are trademarks of the respective companies. BRO-PERFORMER ANALYZER, Revision A © copyright RADCOM, 01.2004 www.radcom.com www.protocols.com