Manufacturers
RAD AMC-101
Description
RAD AMC-101 Series Universal Media Converter / Repeater
Part Number
AMC-101
Price
Request Quote
Manufacturer
RAD
Lead Time
Request Quote
Category
PRODUCTS - A
Datasheet
Extracted Text
AMC-101 Universal Media Converter and Repeater • The SF1, SF2 and SF3 options allow the units to operate over single strand fiber optic cables. • SF1 and SF2 use WDM technology. SF3 utilizes a unique proprietary transmission method (requires SC/APC connector). RETIMED INTERFACES • The unit provides retimed media conversion for the following protocols over optical and copper cables: � 51 Mbps OC-1 � 155 Mbps OC-3/STM-1 FEATURES • Complies with ATM Forum � 155 Mbps STS-3c over STP and ITU-T G.957 and G.958 • Modular media converter � specifications 155 Mbps STS-3c/STM-1 over coax and repeater, operating over � FDDI • Unique WRAP feature fiber optic, STP and coax � Fast Ethernet. activates simultaneous lines loopbacks towards network • When used as a media and • Supports retimed media and user sides for isolation interface converter, AMC-101 converting/repeating for of network failure sources provides a cost-effective protocols such as: alternative to the fiber optic � interfaces of routers, ATM devices 51 Mbps OC-1 DESCRIPTION and ADMs. � 155 Mbps OC-3/STM-1 � • AMC-101 is a modular universal 155 Mbps STS-3c over STP TRANSPARENT INTERFACES media converter that provides � 155 Mbps STS-3c/STM-1 • AMC-101 with transparent retimed or transparent conversion over coax interfaces provides cost-effective of optical and electrical signals for � FDDI media conversion without ATM, SDH/SONET, FDDI, Fast � repeating and reclocking. Fast Ethernet Ethernet and other protocols at data rates of up to 155 Mbps. • Transparent modules are • Transparently converts fiber recommended for short range • The following modules are optic signals at rates of up to applications. available: 155 Mbps for the following � protocols: Retimed modules, which • In fiber-to-fiber conversion provide clock regeneration and applications AMC-101 supports all � ATM/SDH/SONET data reshaping (for 155 Mbps protocols above 1.5 Mbps and up � E1/T1 only) to 155 Mbps, such as: � E3/T3 � Transparent modules, which � ATM/SDH/SONET � provide low-cost conversion for Token Ring � T1/E1 applications that do not require � Ethernet � E3/T3 repeating or reclocking. • Supports hot-swappable, � Token Ring • A long haul fiber optic option is electrical and fiber optic � Ethernet. available to provide an increased modules, including long range of up to 110 km (68 miles). haul and WDM (single fiber interfaces) AMC-101 Universal Media Converter and Repeater Table 1. Electrical Interface Modules AMC-101 Protocols Cable Type Connector Type Impedance Typical Range (Attenuation) Retimed/ Module Transparent Supported Retimed Mode Transparent Mode [m] [ft] [m] [ft] [Ω] STP/155 R/T STS-3c STP Type 1 DB-9 150 100 328 50 164 CX/BNC/155 R STS-3c, STM-1 Coax BNC 75 12.7 dB* DIN 47295 1.6/5.6 CX/DIN/155 R STS-3c, STM-1 Coax 75 12.7 dB* coax * 135m range is attainable when using RG59 B/U (at 78 MHz, in accordance with the square root of frequency law). APPLICATIONS Coaxial Cable Single Mode Fiber Single Mode Fiber Coax SDH/SONET 110 km (68 miles) 110 km (68 miles) AMC-101 AMC-101 AMC-101 ADM ADM Figure 1. AMC-101 Operating as Media Converter and Repeater Central Office/POP Customer Premises Coaxial Coaxial Multimode Fiber Multimode Fiber Cable Cable SDH/SONET AMC-101 AMC-101 ATM Edge ATM Device Device Figure 2. AMC-101 Extending ATM Services over an SDH/SONET Network AMC-101 Universal Media Converter and Repeater Table 2. Fiber Optic Interfaces Retimed/ Connector Transmitter Fiber Type Typical Receiver Typical Range According to Transparent Type Type, Optical Sensitivity Data Rates Wavelength Power AMC-101 Module 51 Mbps 100 Mbps 155 Mbps [nm] [dBm] [dBm] [km] [miles] [km] [miles] [km] [miles] MM/ST/85 T ST VCSEL, 850 62.5/125, -17 -30 3 1.8 2 1.2 2 1.2 multimode MM/SC/85 T SC MM/FC/85 T FC MM/SC/13 R/T SC LED, 1310 62.5/125, -18 -31 4 2.4 2 1.2 2 1.2 multimode MM/ST/13 R/T ST SM/SC/13L R/T SC Laser, 1310 9/125, -12 -31 40 25 25 15.5 20 12.4 single mode SM/ST/13L R/T ST SM/FC/13L R/T FC SM/SC/13LH R/T SC Laser 9/125, -2 -34 60 37 50 31 40 25 (long haul), single mode SM/ST/13LH R/T ST 1310 SM/FC/13LH R/T FC SM/ST/15L R/T ST Laser, 1550 9/125, -12 -31 50 31 25 15.5 20 12.4 single mode SM/FC/15L R/T FC SM/SC/15LH R/T SC Laser 9/125, -2 -34 110 68 100 62.1 80 49.7 (long haul), single mode SM/ST/15LH R/T ST 1550 SM/FC/15LH R/T FC SF1/SC R/T SC Laser 9/125, -12 -29 35 21.7 25 15.5 20 12.4 (WDM), single mode Tx – 1310 Rx – 1550 SF2/SC R/T SC Laser 9/125, -12 -29 35 21.7 25 15.5 20 12.4 (WDM), single mode Tx – 1550 Rx – 1310 SF3 R/T SC/APC Laser 9/125, -12 -27 20 12.4 20 12.4 20 12.4 (single-strand single mode fiber), 1310 Tx and Rx Notes: • Typical ranges are calculated according to attenuation of 0.4 dB/km for 1310 nm and 0.25 dB/km for 1550 nm interfaces. • FO interfaces (except AMC-M/MM/ST, SC, FC/85) support transparent or retimed configurations (if ordered). Add R for a retimed interface.For example AMC-M/SM/SC/13L/R. • The Fast Ethernet and FDDI protocols are supported by the retimed modules only. AMC-101 Universal Media Converter and Repeater SPECIFICATIONS • Controls ORDERING WRAP – Activates a loopback • Interface Modules AMC-101/~ towards the user and network See Table 1 and Table 2 sides Universal media converter and Rate selector – Selects the operation repeater • Data Rate rate (51, 100, 155 Mbps) for Up to 155 Mbps retimed or transparent modules ~ Specify power supply type: • Alarm Relay (OTHER) AC for 100 to 240 VAC Dry contact via 9-pin, D-type, 48 for -48 VDC • Power female connector AC: 100–240 VAC, 50 or 60 Hz AMC-M/# • Indicators DC: -48 VDC Interface module for AMC-101 PWR (green) – Power status • Power Consumption Note: Refer to Table 1 and Table 2 for the FLT (red) – Blinks when an illegal 16W max module names. combination of card types and • Physical selected data rate is detected # Specify interface for AMC-101 WRAP (green) – On when a Height: 44 mm / 1.7 in interface according to Table 1 and Width: 216 mm / 8.5 in loopback is running towards the user and network sides Depth: 240 mm / 9.4 in Table 2. Weight 1 kg / 2.2 lb SIG (green) – On when received Add R for a retimed interface signal is detected, or blinks For example AMC-M/SM/SC/13L/R • Environment when the PLL is unlocked Temperature: 0–40°C/32–104°F Default is transparent. (retimed modules only) Humidity: Up to 90%, Note: Each AMC-101 unit houses two different non-condensing interfaces. RM-101 Hardware kit for mounting one or two AMC-101 units in a 19-inch rack data communications www.rad.com International Headquarters 24 Raoul Wallenberg Street Tel Aviv 69719, Israel Tel: (972) 3-6458181 Fax: (972) 3-6498250, 6474436 Email: market@rad.com U.S. Headquarters 900 Corporate Drive Mahwah, NJ 07430 Tel: (201) 529-1100 Toll free: 1-800-444-7234 Fax: (201) 529-5777 Email: market@radusa.com 333-100-01/05 1996–2005 RAD Data Communications Ltd. Specifications are subject to change without prior notice. All other trademarks are the property of their respective holders.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the AMC-101 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods