Airmux-200 Broadband Wireless Multiplexer FEATURES DESCRIPTION • Air interface data is encrypted using Advanced Encryption • Airmux-200 is a carrier-class, • Cost effective point-to-point System (AES) with a 128-bit 48 Mbps capacity, cost effective broadband wireless encryption key. point-to-point broadband wireless multiplexer transmission system. It combines • When the link quality is out of • Operates at 5.x GHz, legacy TDM and Ethernet services limits, Airmux-200 automatically 4.9 GHz, and 2.4 GHz for transmission over 5.x GHz, searches for a clear channel within 4.9 GHz, and 2.4 GHz licensed a pre-selected list of frequencies. unlicensed and licensed and unlicensed bands, and is bands • External events trigger alarms via suitable for deployment in FCC the dry-contact alarm inputs. • Air data rate of up to regulated countries. 48 Mbps • Airmux multiplexers consist of an • Short time-to-service: outdoor unit (ODU) and an � • Transmission range of up to Wireless connectivity instead of indoor unit (IDU or IDU-E). private line leasing from service 80 km (50 miles) providers • The outdoor unit is suitable for • High reliability and availability mast or wall installation. � License-exempt spectrum based on robust air interface Mounting brackets are supplied removes regulatory delays with the unit. • Air interface encryption � Compact integrated system, easy to install and operate. APPLICATIONS • Integrated solution for E1/T1 • Airmux-200 provides high and Ethernet interfaces • Cellular Backhauling performance and reliability. The Airmux-200 connects between • Redundant power supply interface ensures low BER, as well cellular base stations and and 4 E1/T1 interfaces as low latency, and full controllers. This solution meets available in extended IDU-E compliance with E1/T1 interface the requirements of cellular version jitter and wander requirements. backhauling applications by providing four E1/T1 interfaces • Transmission range of up to • Automatic channel selection and Ethernet traffic for 80 km (50 miles) is available with maintenance and control. • Dry-contact alarm relay an external antenna. Airmux-200 Broadband Wireless Multiplexer • Broadband Access SPECIFICATIONS LAN INTERFACE Airmux-200 provides broadband • Number of Ports Ethernet and leased line services, RADIO to Small and Medium Enterprises IDU: 1 • Frequency Bands (SME). IDU-E: 2 5.8 GHz (5.725–5.850 GHz) 5.4 GHz (5.470–5.725 GHz) • Hot-Spot Backhauling • Type 5.3 GHz (5.250–5.350 GHz) Airmux-200 provides a robust 10/100BaseT, autonegotiation 4.9 GHz (4.940–4.990 GHz) alternative to the last mile • Framing/Coding 2.4 GHz (2.400–2.4835 GHz) connection between the WLAN IEEE 802.3u 2.3 GHz (2.300–2.400 GHz) access point and the data • Bridging network, compared with the often • Data Rate used expensive E1/T1 leased lines. Self-learning, up to 2048 MAC Up to 48 Mbps, user-configurable addresses • Wireless ISP Backhaul • Channel Bandwidth • Traffic Handling Wireless Internet Service Providers 20 MHz MAC layer bridging, self-learning (WISP) backhaul their Point of • Duplex Technique Presence (POP) traffic to the • Latency TDD network operation center. 3 msec (typical) With Airmux-200, WISPs achieve • Modulation • Line Impedance higher capacity, and can offer OFDM - BPSK, QPSK, 100Ω bundled connectivity, with a 16 QAM, 64 QAM range of up to 80 km (50 miles). • VLAN Support • Transmit Power Transparent See Table 1 • Remote Sites Connectivity • Connector Airmux-200 is offered to • RF Dynamic Range enterprises with multiple sites that RJ-45 More than 50 dB require a transparent connection of LAN and PBX systems across their various campuses. Table 1. Radio Regulatory Compliance and Maximum Transmit Power USA and Canada Europe (ETSI) Frequency Regulation Max. Tx Power Regulation Max. Tx Power [GHz] [dBm] [dBm] 5.725 – 5.850 47CFR Part 15 Subpart C, RSS-210 17 N/A N/A 5.470 – 5.725 N/A N/A EN 300 216 V1.2.1, 8 EN 301 893 V1.2.2 EIRP ≤ 30 5.250 – 5.350 47CFR Part 15 Subpart E , RSS-210 8 N/A N/A 4.940 – 4.990 47CFR Part 15 Subpart B 15 N/A N/A 2.400 – 2.4835 47CFR Part 15 Subpart C , RSS-210 11 EN 300 328 -4 EIRP ≤ 20 APPLICATION Figure 1. Airmux-200 in a Point-to Point Application Airmux-200 Broadband Wireless Multiplexer E1/T1 INTERFACE • Connector • Environment • Number of Ports RJ-45 Outdoor unit and external antenna: IDU: 1 or 2 Enclosure: IP67 all-weather case • Upgrade Capabilities Temperature: -35 to 60°C IDU-E: 4 Local and over-the-air software (-31 to 140°F) • Framing download Indoor units: Unframed GENERAL Temperature: 0 to 50°C • Timing (32 to 122°F) • Diagnostics Plesiochronous (independent Humidity: Up to 90%, Local and remote loopbacks Tx and Rx timing) non-condensing • IDU-to-ODU Connection • Line Code • Physical Outdoor Cat.5e cable, E1: HDB3 ODU (with integrated antenna): 100m (328 ft) maximum length T1: B8ZS, AMI Height: 305 mm (12.0 in) • Power Width: 305 mm (12.0 in) • Latency DC: -48, 24 VDC Depth: 58 mm (2.3 in) 8 msec Weight 1.5 kg (3.3 lb) AC: 100–240 VAC • Line Impedance Two AC power supply options are IDU: E1: 120Ω, balanced available for IDU-E: Height: 44 mm (1.7 in) � T1: 100Ω, balanced Single fixed power supply Width: 237 mm (9.3 in) � Depth: 165 mm (6.5 in) Two modular power supplies • Connector Weight 0.5 kg (1.1 lb) RJ-45 • Power Consumption IDU-E: ODU with IDU: 10W max • Jitter and Wander Compliance Height: 44 mm (1.7 in) ODU with IDU-E: 14W max As per G.823, G.824 Width: 430 mm (17.0 in) Depth: 290 mm (11.4 in) requirements • Indicators Weight: 1.5 kg (3.3 lb) PWR (green) – Power status MANAGEMENT IDU (green) – IDU status ANTENNA • Protocol ODU (green/red) – ODU-to-IDU • Characteristics SNMP-based link status See Table 2 AIR I/F (green/red) – Air Interface • Network Management status SNMPc-based SERVICE (green/red) – E1/T1 • Management Interface signal status 10/100BaseT Table 2. Airmux-200 Antenna Options Type Gain Typical Beam Dimensions Weight Connector Lightning Range Protection [dBi] [km] [miles] [degrees] [mm] [in] [kg] [Ib] 5.8, 5.4, 5.3 GHz Integrated Flat panel 22 40 25 9.0 0.5 1.1 NR Yes 305×305×58 12×12×2.3 External Flat panel 28 80 50 4.5 5.0 11.0 N-type No 600×600×51 23.6×23.6×2 5.8 GHz External Dish 32.5 80 50 4.5 Dia 900 Dia 35.4 10 22 N-type No 4.9 GHz External Flat panel 21 24 15 9.0 305×305×58 12×12×2.3 0.5 1.1 N-type Yes External Dish 27 80 50 5 Dia 600 Dia 23.6 5.0 11.0 N-type Yes 2.3, 2.4 GHz Integrated Flat panel 17 40 25 20 0.5 1.1 NR Yes 305×305×58 12×12×2.3 External Grid 24 80 50 7.5 2.0 4.6 N-type No 600×997×380 23.5×39.2×15 Note: The range of the system depends on the system configuration, for further information, please contact the RAD distributor nearest you or one of RAD's offices worldwide. Airmux-200 Broadband Wireless Multiplexer # Specify the frequency band ORDERING OPTIONAL ACCESSORIES and regulation: CBL-Airmux-UTP/@ Airmux-200/IDU/~/UTP/* F23 for 2.300–2.400 GHz Assembled cable for permanent Indoor unit F24E for 2.400–2.4835 GHz, ETSI connection between indoor and F24E-LG for low-gain F24E Airmux-200/IDUE/~/~/2UTP/* outdoor units F24F for 2.400–2.4835 GHz, FCC Extended indoor unit with optional @ Specify cable length: F49F for 4.940–4.990 GHz, FCC redundant power supply 25 for 25m (82 ft) cable F53E for 5.250–5.350 GHz, ETSI 50 for 50m (164 ft) cable Airmux-200/ODU/#/^ F53F for 5.250–5.350 GHz, FCC 75 for 75m (246 ft) cable Outdoor unit F53HP for high-power F53 100 for 100m (328 ft) cable F54E for 5.470–5.725 GHz, ETSI Airmux-200/#/^/~/UTP/*/KIT Airmux-ANT/$ F54E-HG for high-gain F54E A system comprising two indoor External antenna supplied with 1m F54E-LG for low-gain F54E units and two outdoor units (3.3 ft) cable F54HP for high-power F54 Airmux-200E/#/^/~/~/2UTP/*/KIT $ Specify external antenna type, where F58 for 5.725–5.850 GHz A system comprising two extended Note: F24E, F24E-LG, F49F, F54E-LG, and grid is a grid antenna, fp is a flat panel F54E-HG are available with external indoor units and two outdoor units antenna, and dish is a dish antenna: antenna only. Note: Kits are supplied without the cable. 21/4.9/db/fp for 21 dBi, 4.9 GHz * Specify interface type: 22/5.3/db/fp for 22 dBi, 5.3 GHz ~ Specify power supply type: IDU: 22/5.4/db/fp for 22 dBi, 5.4 GHz 115 for 115 VAC power supply E1 for E1 interface 22/5.8/db/fp for 22 dBi, 5.8 GHz 230 for 230 VAC power supply T1 for T1 interface 24/2.4/db/grid for 24 dBi, 2.4 GHz IDU-E only: 2E1 for two E1 interfaces 27/4.9/db/dish for 27 dBi, 4.9 GHz 48 for -48 VDC power supply 2T1 for two T1 interfaces 27/4.9/db/fp for 27 dBi, 4.9 GHz 24 for 24 VDC power supply ETH for Ethernet interface only 28/5.3/db/fp for 28 dBi, 5.3 GHz Notes: The Airmux-200 IDU-E may be IDU-E: 28/5.4/db/fp for 28 dBi, 5.4 GHz ordered with two AC modular removable 4E1 for four E1 interfaces 28/5.8/db/fp for 28 dBi, 5.8 GHz power supplies. 4T1 for four T1 interfaces 32/5.3/db/dish for 32.5 dBi, 5.3 GHz The power supply of the single power supply option is not removable. ETH for Ethernet interface only 32/5.4/db/dish for 32.5 dBi, 5.4 GHz For IDU operation via -48 VDC, order 32/5.8/db/dish for 32.5 dBi, 5.8 GHz either AC version. ^ Specify EXT for outdoor unit with RM-33 dedicated connector for external Hardware kit for mounting one IDU antenna connection Note: If EXT is not specified, in a 19-inch rack Airmux-200/ODU is supplied with an integrated antenna. www.rad.com International Headquarters 24 Raoul Wallenberg Street Tel Aviv 69719, Israel Tel: 972-3-6458181 Fax: 972-3-6498250 Email: market@rad.com North America Headquarters 900 Corporate Drive Mahwah, NJ 07430, USA Tel: (201) 529-1100 Toll free: 1-800 444-7234 Fax: (201) 529-5777 Email: market@radusa.com 199-100-07/06 © 2003–2006 RAD Data Communications Ltd. Specifications are subject to change without prior notice. All other trademarks are the property of their respective holders.