AirMux-104 Point-to-Point Wireless TDM/IP Multiplexer • 5.7250–5.850 GHz is a newly allocated license-exempt band. It provides uninterrupted and more reliable transmission in comparison with the legacy 2.4 GHz unlicensed band, resulting in higher QoS. • Unlicensed bands allow faster and more affordable deployment without frequency coordination and license fees. • A powerful Forward Error Correction (FEC) mechanism is employed to ensure integrity of transmission, providing higher quality of service with BER as low as 1E-10. • Time Division Duplex (TDD) technology considerably simplifies installation and free channel selection procedure. The TDD technology enables to transmit and receive data over a single channel and supports 12 operation channels in the FEATURES DESCRIPTION 5.725–5.850 GHz band. • To minimize system downtime, • Wireless point-to-point • The AirMux-104 point-to-point AirMux-104 provides multiplexer operating at multiplexer operates at comprehensive diagnostic 5.725 GHz–5.850 GHz, a 5.725–5.850 GHz over capabilities that include: license-free band in many ANSI UNII and ISM � countries. Traffic monitoring license-exempt bands � • AirMux-104 transmits E1 or Real-time alarms generation that • Configurable combination of fractional E1 and Ethernet traffic at alert users on faulty conditions E1/Fractional E1 and distances of up to 16 km � Internal and external loopbacks Ethernet traffic over (10 miles). on the local and remote units. 2.6 Mbps full duplex These unique capabilities make wireless link • AirMux-104 consists of an AirMux-104 ideal for a variety of outdoor radio terminal (RT) and • Operates at ranges of up to applications: an indoor radio terminal 16 km (10 miles) � Building-to-building or connection box (RTCB). campus-to-campus PBX and LAN • Carrier resolution at connectivity 12 × 10 MHz intervals � Cellular BTS to BSC backhauling • Time Division Duplex (TDD) � Connection to temporary locations, for simplified installation such as, construction and mining and free channel selection sites, military camps etc. • Extensive diagnostics, • Operation over 5.725–5.850 GHz including performance bands is not affected by harsh monitoring and loopbacks on weather conditions, such as fog or the local and remote units heavy rain. AirMux-104 Point-to-Point Wireless TDM/IP Multiplexer • Bridging • Physical SPECIFICATIONS Self-learning, up to 4000 MAC RT (outdoor unit): addresses Height: 305 mm / 12 in WIRELESS LINK Width: 305 mm / 12 in • Traffic Handling Depth: 72 mm / 2.8 in • Technology MAC layer bridging, self-learning Weight 3.3 kg / 7.2 lb Spread spectrum RTCB (indoor unit): • Line Impedance • Frequency Band Height: 44 mm / 1.7 in 100Ω 5.725–5.850 GHz, as specified by: Width: 237 mm / 9.3 in � ANSI Unlicensed National • VLAN Support Depth: 107 mm / 6.7 in Information Infrastructure (UNNII) Transparent Weight 0.58 kg / 1.4 lb � ISM • Environment • Data Rate RT: • Standards 2.3 Mbps max Enclosure: all-weather case FCC 15.401&15.407 UNII, • Connector Temperature: -45–60°C/-49–140°F ETSI TS-101-475 RJ-45 RTCB: • Capacity Temperature: -5–45°C/23–113°F E1 INTERFACE 2.6 Mbps, full duplex Humidity: Up to 90%, non-condensing • Framing • Duplexing Method G.703, G.704 with or without CRC Time Division Duplex (TDD) ORDERING • Data Rate • Channel Bandwidth N x 64 kbps (n = 1, 2, ..., 32), AirMux-104/OD 10 MHz Point-to-point wireless TDM/IP user-selectable • Modulation multiplexer, outdoor unit (RT) • Timing QPSK AirMux-104/ID Plesiochronous Point-to-point wireless TDM/IP • Transmitter Power • Connector multiplexer, indoor unit (RTCB) 16 dBm max RJ-45 CBL-AirMux/@ • Receiver Sensitivity RT-to-RTCB connection cable GENERAL -90 dBm at BER 1E-8 @ Specify cable length: • Indicators • Antenna Type and Polarization 25 for 25m cable SERVICE (green/red) – E1 status Integrated flat panel, vertical and 50 for 50m cable horizontal polarization AIR I/F (green/red) – Wireless link 75 for 75m cable 100 for 100m cable status • Antenna Gain RTCB (green) – RTCB self-test 23 dBi CBL-AirMux-Config results RT-to-RTCB connection cable for indoor • Antenna Beam RT (green/red) – RT-to-RTCB link initial setup, 2m long with DB-25 and status ±9°, directional 16-pin Krone-type connectors PWR (green) – Power status • RT Installation Method Note: The CBL-AirMux-Config cable is required only for initial setup of the system. It is also Mast or wall mounting • Upgrade Capabilities recommended to include it into technician kits. Local and remote software LAN INTERFACE download • Type • Power 10/100BaseT, autonegotiation 100–240 VAC via external AC/DC • Framing/Coding converter IEEE 802.3/U • Power Consumption 25W max (RT and RTCB) APPLICATION 2.6 Mbps 16 km (10 miles) E1/FE1 E1/FE1 PBX PBX Ethernet Ethernet AirMux-104 AirMux-104 193-100-03/03 LAN LAN Specifications are subject to change without prior notice. All other trademarks are the property of their respective holders. LA-110 LinkAccess LA-110 LinkAccess