Solo T1 CSU Providing a new level of versatility for broadband access. Product Overview The Solo T1 CSU supports T1 framing formats (D4 and ESF) as well as line coding standards (AMI and B8ZS). It performs conversion from SF to ESF framing formats so that legacy data terminal equipment can be used with the ESF facilities. The Solo T1 CSU features an embedded SNMP agent with the standard management information base (MIB II) and RFC 1406, as well as a device-specific enterprise MIB, which allows complete unit configuration, test pattern set-up, and retrieval of all network and unit performance statistics. The Solo T1 CSU provides comprehensive in-service testing capabilities and two front-access bantam test jacks. Test patterns can be transmitted on the full T1 payload or only the fraction of payload bandwidth allocated. New features and upgrades can be easily downloaded remotely. Solo T1 CSU Features • T1 CSU connectivity at 1.544 Mbps The Solo T1 CSU is a versatile device that provides T1 network monitoring, in-service • Local and remote management using an embedded diagnostics and network protection in SNMP agent compliance with FCC, AT&T ESF, and ANSI • Telnet management access via COMM port T1.403 specifications. • Easy integration with popular SNMP management packages • Alarm dial-out connection for unattended remote operation • Downloadable code • Available in stand-alone and chassis-based module versions SOLO T1 SNMP CSU MAP MANAGEMENT ACCESS PROCESSOR Solo T1 CSU Network Port Line rate 1.544 Mbps ± 75 bps Line code B8ZS, AMI Quick Eagle Networks Framing ESF, D4 ESF FDL AT&T TR54016-1986, AT&T TR54016-1989, ANSI T1.403-1989 217 Humboldt Court Input level DSX-1, 0 to -26 dB Sunnyvale, CA 94089-1300 Output level 0, -7.5, or -15 dB LBO USA Pulse density AT&T 62411, HDLC inversion, forced AT&T TR 54019A System timing Internal, network, data port 1 408 745-6200 Phone Connector type DA-15 socket 1 408 745-6250 Fax www.quickeagle.com Web Data Port Line rate 1.544 Mbps ± 50 bps Line code B8ZS, AMI For North American sales: Framing ESF, D4 1 888 280-5465 Phone System timing Internal, network, DS1 DTE (AUX) Electrical DSX-1 info@quickeagle.com E-mail Connector type DA-15 socket For international sales: COMM Port Terminal emulation VT-100 compatible +1 408 745-4230 Phone Connector type DE-9 socket intl_info@quickeagle.com E-mail Power Requirements Voltage 100 VAC to 240 VAC, 50/60 Hz or -48 VDC to -60 VDC Consumption 6 W maximum Regulatory UL 1950 3rd Edition, cUL; FCC Part 68, FCC Part 15 Class A Diagnostics Loopbacks DS1 DTE, loop-up/loop-down commands, T1 network, fractional T1 (ANSI V.54), T1 payload, fractional T1 payload Test patterns QRW, 1:1, 1:2, 1:4, 1:8, 3:24, all 1s, all 0s, 2 user-programmable, 24-bit patterns Front panel LEDs Power/test, network status, network loopback, loopback acknowledgement, DTE loopback, AUX Alarm parameters Network: loss of network signal, loss of network frame, receive blue alarm, receive yellow alarm, excessive BPV/CRC/OOF DS1 DTE (AUX): loss of DTE signal, loss of DTE frame, receive blue alarm, receive yellow alarm Physical Stand-alone dimensions 22.2 cm (W) x 4.45 cm (H) x 29.2 cm (D), 2.5 kg 8.75 in (W) x 1.75 in (H) x 11.5 in (D), 5.6 lb Module dimensions 1.90 cm (W) x 21.92 cm (H) x 20.96 cm (D), 0.34 kg 0.75 in (W) x 8.63 in (H) x 8.25 in (D), 0.75 lb Environmental Operating temperature 0˚C to +50˚C Storage temperature -20˚C to +60˚C Relative humidity 0% to 95% non-condensing © 2001 Quick Eagle Networks • All rights reserved • 5K/DP/3/01 Maximum altitude 4,572 km (15,000 ft) The information presented herein may change without notice and should be used for informational purposes only. DL3800 T1 Inverse Multiplexer, DL3800E E1 Inverse Multiplexer, DL3900 Broadband Access System, and WANview Network Management System are trademarks of Quick Eagle Networks, formerly Digital Link Corporation. All product and service names mentioned are trademarks of their respective owners.