Dead-end & Accessories: Section 20 Section 20 – Dead-end & Accessories Table of Contents Page Figure-8 Messenger Dead-end .............................................................20-2 ® GUY-GRIP Dead-end ............................................................................20-3 Big-Grip Dead-end .................................................................................20-6 False Dead-end ......................................................................................20-8 Open Wire Dead-end .............................................................................20-9 Drop Wire/C-Rural/Buried Line Wire Dead-end ................................20-10 Telegrip .................................................................................................20-11 Custom Coaxial Dead-end ..................................................................20-12 Pulling Eye ...........................................................................................20-13 Safety Guy-Wire Dispenser ................................................................20-14 Dead-ends for Figure-8 Messenger Dead-ends for Figure-8 Drop Wire Messenger There is no quicker, easier way to attach Figure-8 drop ™ wire or cable than with PREFORMED Dead-ends for Figure-8 RG-59/U coaxial cable messenger. Strip the messenger to accommodate the Dead-end and wrap on for a secure and permanent installation. The helical shape will insure low distribution of holding stresses and prevent premature fatigue breakage. If required, False or Double Dead-ending can be accomplished without cutting the wire, a feature that is exclusive with all helically designed PREFORMED Dead-ends. Units Wt./Lbs. Catalog Number Material Cable Diameter Per Carton DE-2525 Galvanized Steel .051" 200 7 DE-2505 Galvanized Steel .063" 200 8 DE-2506 Galvanized Steel .083" 200 8 GDE-2501 Galvanized Steel .109" 100 9 GDE-2503 Galvanized Steel .134" 100 15 DE-8500 Stainless Steel .063" 200 5 DE-8501 Stainless Steel .083" 200 5 20-2 ® GUY-GRIP Dead-end Dead-end & Accessories: Section 20 ® GUY-GRIP Dead-end GUY-GRIP Dead-ends, installed at the top, the breaker and NOMENCLATURE the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end is Cross-over Marks: neat in appearance and free from bolts or high-stress (A)—Indicates starting point for application on smaller holding devices. The GUY-GRIP Dead-end was the first to diameter fittings. offer the cabled loop, a feature that provides more durabil- (B)—Indicates alternate starting point for application on ity, easier tensioning and adaptability to multiple guying. larger diameter fittings. Cabled Loop: Furnished as standard, all sizes. GUY-GRIP Dead-ends are made of the same material as Pitch Length: One complete wrap. the strand to which they are applied. They should be used on hardware that is held in a fixed position. The fitting should Short Leg-Long Leg: Identifies rods belonging to each not be allowed to rotate or spin about the axis of the strand. leg, after application. They should not be used as tools including come-alongs, Color Code and Length: Assists in identification of pulling-in grips, etc. strand size, corresponding to tabular information appear- ing on price page. Identification Tape: Shows catalog number, nominal sizes. Nomenclature Length Short Leg Color Code and Cabled Loop Cross-over Marks* Long Leg Identification Pitch Length Tape Suggested Hardware Dimensions for Cabled-loop GUY-GRIP Dead-ends Nominal Strand Sizes Seat Dimensions (fig 1 & 2) Dead-end Max. Seat Diameter Minimum Minimum Minimum Diameter with Dead-end at Groove Groove Hole Figure 1 Range Galvlvanized/ Aluminum- Second Crossover Diameter Diameter Diameter* (mm) Galfan Steel Clad Steel Mark (mm) (mm) (fig. 2) (mm) (fig. 3) (mm) (fig. 3) Loop of Dead-end .123"-.143" 1 3 3 ⁄ " — — ⁄ " (4.7) ⁄ " (4.7) ¼" (6.3) Seat 8 16 16 (3.1-3.6) Diameter .144"-.173" 5 5 ⁄ " — 2½" (64) ¼" (6.3) ¼" (6.3) ⁄ " (7.9) 32 16 2nd X-over (3.7-4.4) 1st X-over .174"-.203" 3 3 ⁄ " — 2½" (64) ¼" (6.3) ¼" (6.3) ⁄ " (9.5) 16 8 (4.4-5.2) Figure 2 .204"-.230" 7 5 5 3 ⁄ " 3 #10, 4M3 2½" (64) ⁄ " (7.9) ⁄ " (7.9) ⁄ " (9.5) 32 16 16 8 (5.2-5.8) .231"-.259" 5 5 7 ¼" 7 #12, 6M 2½" (64) ⁄ " (7.9) ⁄ " (7.9) ⁄ " (11.0) 16 16 16 Seat (5.9-6.6) Diameter .260"-.291" 9 3 3 7 #11, 8M ⁄32" 2½" (64) ⁄8" (9.5) ⁄8" (9.5) ½" (12.7) (6.6-7.4) Groove .292"-.336" Diameter 5 3 3 9 7 #10, 10 M ⁄16" 2½" (64) ⁄8" (9.5) ⁄8" (9.5) ⁄16" (14.2) (7.4-8.5) .337"-.394" Figure 3 3 7 7 5 7 #8, 14M, 16M Hardware* ⁄8" 2½" (64) ⁄16" (11.0) ⁄16" (11.0) ⁄8" (15.8) (8.6-10) Hole .395"-.474" Diameter 7 11 7 #7, 18M, 20M ⁄16" 2½" (64) ½" (12.7) ½" (12.7) ⁄16" (17.4) (10-12) .475"-.515" 9 9 ** 7 #6 — ⁄16" (14.2) ⁄16" (14.2) ¾" (19.0) (12.1-13.1) .516"-.570" 5 5 15 ** 7 #5, 25M — ⁄8" (15.8) ⁄8" (15.8) ⁄16" (23.7) (13.1-14.5) *Depending on geometric shape of the hole, a hole diameter less than specified may be acceptable. **Use Big-Gr ip Dead-ends (Refer to Page 20-6). ® Note: Alumoweld is a registered trademark of the Copperweld Company. 20-3 ® GUY-GRIP Dead-end Acceptable Fittings NEMA D 54-1 1-3/4" 54-2 2-1/8" Anchor Rod Diam. 54-3 2-3/8" 1/2" 5/8" 3/4" 1" 1-1/4 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 54-4 2-3/8" Loop Diameters 1" to 2-3/8" Loop Diameters 1" to 1-7/8" Loop Diameters 1" to 2" Loop Diameters 1-3/4" to 2-3/8" For Use on Galvanized Steel Strand Mean Catalog Number Strand Diameter Length Color Units Wt./Lbs. B-Coat C-Coat Size (mm) Construction (mm) (mm) Code Per Carton Per Carton 7W .186" (4.7) 3 GDE-1102 GDE-2102 ⁄16" (4.7) 20" (508) Red 100 30 7W .195" (4.7) 3W .259" (6.5) GDE-1104 GDE-2104 ¼" (6.3) 25" (635) Yellow 50 24 7W .240" (6.0) 3W .312" (7.9) 5 GDE-1106 GDE-2106 ⁄ " (7.9) 7W .312" (7.9) 31" (788) Black 50 39 16 7W .327" (7.9) 3W .356" (7.9) 3 GDE-1107 GDE-2107 ⁄ " (9.5) 35" (788) Orange 50 51 8 7W .360" (9.1) 7 GDE-1108 GDE-2108 ⁄ " (11.0) 7W .435" (11.0) 38" (965) Green 25 40 16 ® Bezinal Strand* Mean Catalog Strand Diameter Units Wt./Lbs. Number Size (mm) Construction (mm) Length (mm) Color Code Per Carton Per Carton 7W .186" (5) 3 BDE-9102 ⁄16" (4.7) 20" (508) Red 100 30 7W .195" (5) 3W .259" (7) BDE-9104 ¼" (6.3) 25" (635) Yellow 50 24 7W .240" (6) 3W .312" (8) 5 BDE-9106 ⁄ " (7.9) 7W .312" (8) 31" (788) Black 50 39 16 7W .327" (8) 3W .356" (8) 3 BDE-9107 ⁄ " (9.5) 35" (788) Orange 50 51 8 7W .360" (9) 7 BDE-9108 ⁄ " (11.0) 7W .435" (11) 38" (965) Green 25 40 16 Notes: 1. Left hand lay standard. 2. Big-Grip Dead-end recommended for guying metal towers and antennas. ® *Dead-ends manufactured from Bezinal Material. Bezinal is a registered trademark of the Bekaert Company. 20-4 ® GUY-GRIP Dead-end Dead-end & Accessories: Section 20 ® GUY-GRIP Dead-end Aluminum-Clad Steel Catalog Mean Nominal Units Wt./Lbs. Number Diameter (mm) Strand Size Length (mm) Color Code Per Carton Per Carton AWDE-4108 .220" (5.5) .220" (5.5) 4M 3 #10 21" (533) Green 50 20 AWDE-4110 .242" (6.1) .247" (6.2) 6M 3 #9 24" (610) yellow 50 20 AWDE-4113 .272" (6.9) .277" (7.0) 8M 3 #8 24" (610) Blue 50 22 5 .306" (7.7) .306" (7.7) ⁄ "—7 #10 16 AWDE-4116 26" (660) Black 50 29 .311" (7.8) 10M 3 #7 11 .343" (8.7) .343" (8.7) ⁄ "—7 #10 32 AWDE-4119 29" (737) Yellow 50 41 .349" (8.8) 12.5M 3 #6 AWDE-4120 .363" (9.2) 14M 31" (787) Blue 50 53 3 .385" (9.7) .386" (9.8) ⁄ "—7 #8 8 AWDE-4122 32" (812) Orange 50 55 .392" (9.9) 16M 3 #5 AWDE-4124 .417" (10.5) 18M 34" (864) Black 25 37 7 AWDE-4125 .433" (10.9) ⁄ "—7 #7 36" (914) Green 25 40 16 AWDE-4126 .444" (11.2) 20M 37" (940) Yellow 10 22 Note: Left hand lay standard. Nominal strand size indicates one of various conductors within each range. Big-Grip Dead-end is recommended for guying metal towers and antennas. Catalog Strand Mean Units Wt./Lbs. Number Size (mm) Construction Diameter (mm) Length (mm) Color Code Per Carton Per Carton Stainless Steel for Type 302 Strand .224" (5.6) 7 SDE-5101 ⁄32" (5.5) 3W 7W 22" (559) Blue 100 30 .216" (5.4) .259" (6.5) SDE-5102 ¼" (6.3) 3W 7W 26" (660) Yellow 50 25 .249" (6.3) 9 SDE-5103 ⁄32" (7.1) 7W .279" (7.0) 27" (686) Black 50 26 .312" (7.9) 15 SDE-5104 ⁄ " (23.7) 3W 7W 31" (787) Orange 50 41 16 .312" (7.9) .356" (9.0) 3 SDE-5105 ⁄8" (9.5) 3W 7W 37" (940) Green 50 66 .360" (9.1) Stainless Steel for Type 430 Strand 7 SDE-5106 ⁄ " (11.0) 7W .435" (11.0) 43" (1092) Red 25 53 16 Stainless Steel for Type 316 Strand .224" (5.6) 7 SDE-6101 ⁄ " (5.5) 3W 7W 22" (559) Blue 100 29 32 .216" (5.4) .259" (6.5) SDE-6102 ¼" (6.3) 3W 7W 26" (660) Yellow 50 25 .249" (6.3) 9 SDE-6103 ⁄ " (7.1) 7W .279" (7.0) 27" (686) Black 50 26 32 .312" (7.9) 8 SDE-6504* ⁄ " (7.9) 3W 7W 31" (787) Orange 50 41 16 .312" (7.9) .356" (9.0) 3 SDE-6105 ⁄ " (9.5) 3W 7W 37" (940) Green 50 66 8 .360" (9.1) Note: Left hand lay standard. GUY-GRIP Dead-ends for copper-covered steel are also available. *These Dead-ends utilize the open helix loop design. 20-5 Big-Grip Dead-end Big-Grip Dead-ends are designed for use with antenna, For more detailed information concerning installation communications tower, microwave and various guyed guidelines contact Preformed Line Products. structures that require use of large guy strand. They are effective at both the structure top and the anchor bottom. Galvanized Strand Big-Grip Dead-ends are left hand lay standard and For use on: are applied to the same basic materials as the strand • Extra High Strength • High Strength (galvanized strand, aluminum covered strand, except where • Siemens Martin • Utilities Grade noted differently). The Big-Grip Dead-end is designed to be applied quickly in the field, without tools, and usually by one person. Concentrated stresses in the anchor area are minimized by the cabled loop. Long length helical gripping distributes other stresses uniformly and evenly. BG Per Carton Approx. Rated % of Strand’s Catalog Size Strand Actual Diameter Wt/ Length Color Holding Rated Breaking Number (mm) Construction (mm) Units Lbs (m) Code Strength Strength .495"(12.5) 49" ½" BG-2115 7W or 19W 20 63 Blue 26,900# (100%) or .500"(12.7) (1.24) (12.7) 9 ⁄ " .564"(14.3) 16 BG-2116 7W or 19W 10 48 55" (1.39) Yellow 35,000# (100%) (14.2) or .565" (14.3) 5 ⁄ " .621"(15.7) 8 BG-2111 7W or 19W 10 65 64" (1.62) Black 40,200# (100%) (15.8) or .625"(15.8) ¾" BG-2112 19W .750"(19.0) 5 54 76" (1.93) Orange 58,300# (100%) (19.0) 7 90" ⁄8" *BG-MS-7023 19W .885"(22.4) 3 47 Green 79,700# (100%) (2.28) (22.2) 1" 1.000"(25.4) 125" 104,5000# *BG-MS-7047 19W or 37W 3 76 Blue (100%) (90%) (25.4) or 1.001"(25.4) (3.17) 92,430# Note: Left Hand Lay Standard. ® *Manufactured or Alumoweld material. Alumoweld is a registered trademark of the Copperweld Co. Seat Dimensions Minimum Minimum Pin Diameters Double Extra Strong Weight Pipe Strand Nominal Groove Hardware Diameter Strand Diameter Hole Diam. Thimble Nominal (mm) (mm) Min. (mm)) Max. (mm) (mm) (mm) Size (mm) Min. (mm) Max. (mm) Size (mm) O.D. I.D. 3 3 9 5 5 .475"-.515" 1" ½" 1 ⁄8" 2 ⁄8 ⁄16" ¾" ⁄8" 1 ⁄8" 1¼" 1.66 .896 (12-18) (25.4) (12.7) (34.9) (60.3) (14.2) (19.0) (15.8) (41.2) (31.7) 9 5 5 15 5 1 5 .516"-.570" ⁄16" 1½" 2 ⁄8" ⁄8" ⁄16" ⁄8" 1 ⁄8" 1 ⁄8" 1¼" 1.66 .896 (13-14) (14.2) (38.1) (66.6) (15.8) (23.7) (15.8) (28.5) (41.2) (31.7) 5 5 7 .571"-.635" ⁄ " 2" 2 ⁄ " ¾" 1" ¾" 1½" 1 ⁄ " 1¼" 8 8 8 1.66 .896 (15-16) (15.8) (50.8) (66.6) (19.0) (25.4) (19.0) (38.1) (47.6) (31.7) 1 7 3 7 7 1 .636"-.772" ¾" 2½" 3 ⁄ " ⁄ " 1 ⁄ " ⁄ " 1 ⁄ " 2 ⁄ " 1½" 8 8 16 8 8 8 1.9 1.1 (16-20) (19.0) (63.5) (79.3) (22.2) (30.1) (22.0) (47.6) (53.9) (38.1) 5 3 3 .773"-.868" 1" 1" 2" 2" 2½" 3 ⁄8" 1 ⁄8" 2 ⁄8" – 2.375 1.503 (20-22) (25.4) (25.4) (50.8) (50.8) (63.5) (92.0) (34.9) (60.3) 1 3 1 3 .869"-1.024" 1" 3" 1" 2" 4 ⁄8" 1 ⁄8" 1 ⁄8"-1¼" 2 ⁄8" 2¾" 2.375 1.503 (22-26) (25.4) (76.2) (25.4) (50.8) (104.7) (34.9) (28.5-31.7) (60.3) (69.8) 1 3 3 1.025"-1.27" 3½" 5 ⁄ " 1 ⁄ " 1¾" 1¼"-1 ⁄ " 2¾" 3¼" 2½" 8 8 8 – 2.875 1.771 (26-32) (88.9) (130.1) (34.9) (44.4) (31.7-34.9)" (69.8) (82.5) (63.5) 1 3 15 3 7 3 1.30" 4" 5 ⁄ " 1 ⁄ " 1 ⁄ " 1 ⁄ "-1½" 2 ⁄ " 3 ⁄ " 2½" 8 8 16 8 8 8 – 2.875 1.771 (33) (101.6) (130.1) (34.9) (49.1) (34.9-38.1) (73.0) (85.7) (63.5) Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. 20-6 Big-Grip Dead-end Dead-end & Accessories: Section 20 Big-Grip Dead-end For Use On: Aluminum Covered Steel Strand Strand Diameter Range BG Per Carton Approx. Length Rated % of Strand’s Catalog Min. Max. Nominal Wt.- Color Holding Rated Breaking Number Inches Inches Strand Size Units Lbs. Inches Meters Code Strength Strength BG-4168 .475 .494 7#6 25 60 42 1.06 Blue 22,730# (100%) BG-4169 .495 .515 19#10 25 62 44 1.11 Green 27,190# (100%) BG-4170 .516 .536 25M 20 66 47 1.19 Red 25,000# (100%) BG-4171 .537 .555 7#5 20 67 48 1.21 Yellow 27,030# (100%) BG-4172 .556 .570 — 15 68 49 1.24 Blue 33,330# – BG-4173 .571 .591 19#9 20 68 50 1.27 Orange 34,290# (100%) BG-4174 .592 .612 — 15 50 50 1.27 Green 34,500# – BG-4175 .613 .635 — 10 49 54 1.37 Yellow 45,000# – BG-4176 .636 .661 19#8 10 50 56 1.42 Black 43,240# (100%) BG-4177 .662 .686 19 x .1363" 10 66 59 1.49 Blue 47,400# (100%) BG-4178 .687 .712 — 10 68 61 1.54 Red 54,200# – 19#7 51,730# BG-4179 .713 .741 10 70 63 1.60 Black (100%) (95%) 37#10 50,300# BG-4180 .742 .772 19 x .1499" 5 41 71 1.80 Yellow 54,300# – BG Per Carton Approx. Length Rated % of Strand’s Catalog Actual Diameter Nominal Wt.- Color Holding Rated Breaking Number Inches Strand Size Units Lbs. Inches Inches Code Strength Strength BG-4181 .792 19 x .1584" 5 50 80 2.03 Blue 59,000# – 37#9 63,430# (95%) (100%) BG-4183 .801, .810, .827 19#6 5 69 84 2.13 Green 61,700# (100%) 19 x .1660" 63,000# 37 x .1213" 71,250# 19 x .170" 19 66,000# (95%) (100%) BG-4185 .849, .850, .866 5 68 87 2.21 Black x .1732" 37 x 68,500# (100%) (95%) .1237" 74,100# BG-4186 .899 37#8 5 76 91 2.31 Yellow 80,000# (95%) 19#5 73,350# BG-4187 .910, .934 5 78 93 2.36 Blue (100%) (100%) 19 x .1868" 75,000# BG-4188 .981 37# .1401" 4 55 95 2.41 Red 90,250# (95%) BG-4189 1.01 37#7 4 85 106 2.74 Green 90,600# (90%) BG-4190 1.10 37 x .1571" 3 87 117 2.97 Black 101,700# (90%) BG-4191 1.134 37#6 3 86 120 3.04 Yellow 108,200# (90%) BG-4192 1.27 37#5 2 87 151 3.83 Red 127,000# (89%) Note: Left Hand Lay Standard. 20-7 False Dead-end False Dead-ends PREFORMED False Dead-ends are a fast, safe, and economical method for false dead-ending strand. They are are designed to be easily applied without any special tools, and because False Dead-ends are made from the same material as the strand, they will hold the same published rated breaking strength. Galvanized Steel, C-Coat for use on Extra High Strength or Utility Grade Strands Catalog Color Units Wt./Lbs. Number Strand 7-Wire Mean Diameter Length Code Per Carton Per Carton GFDE-2121 ¼" .240" 36" Yellow 25 17 5 GFDE-2123 ⁄ " .327" 39" Black 25 24 16 3 GFDE-2124 ⁄ " .360" 42" Orange 25 30 8 7 GFDE-2125 ⁄16" .435" 48" Green 25 52 GFDE-2126 ½" .495" 50" Blue 25 71 Note: Left Hand Lay Standard. ® For use on Bezinal Strand Wt./Lbs. Catalog Units Number Strand 7-Wire Mean Diameter Length Color Code Per Carton Per Carton BFDE-9121 ¼" .240" 36" Yellow 25 17 5 BFDE-9123 ⁄ " .327" 39" Black 25 24 16 3 BFDE-9124 ⁄ " .360" 42" Orange 25 30 8 7 BFDE-9125 ⁄ " .435" 48' Green 25 52 16 BFDE-9126 ½" .495" 50" Blue 25 71 Note: Left Hand Lay Standard. ® Manufactured from Bezinal Material. Bezinal is a registered trademark of the Bekaert Corporation 20-8 Open Wire Dead-end Dead-end & Accessories: Section 20 Open Wire Dead-end Open Wire Dead-ends ™ PREFORMED Dead-ends for Open Wire are designed to be applied by hand in seconds without tools. They exert uniform, positive, gentle gripping. Holding power extends throughout their full length and prevents the concentration of stress points that cause premature line failure. Trim and modern in appearance, they are made of the same material as the conductor to which they are applied and are performance proven even under various climate extremes. Catalog Units Wt./Lbs. Number Wire Gauge Wire Size Length Color Code Per Carton Per Carton Galvanized Steel GDE-2500 BWG-14 .083" 12" Yellow 100 6 GDE-2501 BWG-12 .109" 12" Black 100 9 GDE-2503 BWG-10 .134" 14" Orange 100 15 Aluminum Clad Steel 2004511 AWG-11 .091"-.095" 11" Green 100 7 Copper-Clad Steel CWDE-5507 AWG-12 .080"-.081" 11" Green 100 8 CWDE-5508 AWG-11 .091"-.095" 12" Red 100 9 CWDE-5509 AWG-10 .102"-.104" 12" Blue 100 12 CWDE-5510 AWG-9 .114" 13" Orange 100 13 CWDE-5511 AWG-8 .128" 13" Black 100 16 CWDE-5512 AWG-6 .162" 16" Green 100 21 20-9 Drop Wire/C-Rural/Buried Line Wire Dead-ends Drop Wire Dead-ends ™ PREFORMED Drop Wire Dead-ends provide an easy, low-cost way to support service drop wire without bail failures or stripping of the insulation. Rapidly applied by hand without tools, they are adjusted to exert firm uniform holding power throughout their length, without crushing or damaging drop wire. Wrap-on design prevents potentially damaging stress points. PREFORMED Drop Wire Dead- ends present a trim, neat appearance, and are manufactured of neoprene-coated stainless steel for added protection against the elements. Stainless Steel Neoprene Coated Catalog Units Wt./Lbs. Number Manufacturer Manufacturer’s Designation Color Code Per Carton Per Carton Alphaduct PDCW Parallel (N-182) Black 100 9 Alphaduct PDCW Parallel Dumbbell (NE-182) Black 100 9 NDE-9500 Alphaduct PDCW Parallel Reinforced (NR-182) Black 100 9 Whitney-Blake TCWP Parallel (2#18) Black 100 9 Whitney-Blake TBP Parallel Reinforced (2#17) Black 100 9 AT & T Bell Reinforced (2#18) Green 100 9 NDE-9501 Whitney-Blake TBP-R Parallel Reinforced (2#17) Green 100 9 C-Rural Dead-ends Buried Line Wire Dead-ends ™ PREFORMED C-Rural Wire Dead-ends are an inexpensive Buried Line Wire Dead-ends are used for overhead way of safely dead-ending one pair aerial distribution wire construction applications of buried line wire. to a drive hook or eye bolt. They are designed to keep the lines up and costs down by simple hand application without tools of any kind. Their design assures long maintenance free service life. Catalog Color Units Wts./Lbs. Number Wire Sizes Length Code Per Carton Per Carton Buried Line Wire Dead-ends NDE-8500 2 #19 Copper 21" (533) Red 100 17 NDE-8501 2 #16 Copper 23" (584) Blue 100 26 C-Rural Dead-ends NDE-8502* 2 #14 CW 22" (559) White 200 30 NDE-8503* 2 #12 CW (or .083 Steel) 30" (762) Yellow 250 55 NDE-9502* 2 #14 CW 15" (381) Orange 500 50 *Note: Attachments specifically designed for use with High Density Linear Polyethylene One-Pair Aerial Distribution Wire also may be used with conventional polyethylene covered C-Rural Wire. 20-10 Telegrip Dead-end & Accessories: Section 20 Telegrip Telegrip Telegrips are designed for service drop applications of coaxial cables. Flexible but firm, Telegrips exceed mechanical holding requirements for coaxial cable. The long length design reduces stress levels and eliminates the possibility of crushing the cable or affecting its dielectric properties. Also, its unique gripping principle prevents bending that can cause “snow” or distortion of the television picture. Telegrip Catalog Units Wt/Lbs Number Cable Type (mm) Per Carton Per Carton .242" (6) RG59/U DE-1500 500 23 .275" (7) RG6/U .242" X .504" (6 x 13) 500 25 DUAL RG59U DE-1600 .275" X .546" (7 x 14) 500 25 DUAL RG6/U .312" - .315" DE-1601 (8 - 8) 500 25 QUAD RG6/U Consult PLP for requirements not listed. 20-11 Custom Coaxial Dead-end Coaxial Dead-ends Custom Coaxial and Dual Coaxial Dead-ends are perfor- Catalog Units Wt./Lbs. mance-proven dead-end designs for RG-59/U, Dual RG- Number Cable Type (mm) Per Carton Per Carton 59/U, Dual RG-6/U, and RG-11/U coaxial cable. In addition Custom Coaxial Dead-End to the inherent benefits of the basic Telegrip, these premium products feature twin leg construction which cushion and DE-3329* RG59/U .242" (6.1) 200 9 relieve gripping stresses created by unusually high winds Dual Coaxial Dead-End and heavy ice loading. They are especially recommended DUAL RG59/U for foam insulated coaxial cable and areas where there are DE-2519 .242" X .504" 200 20 extreme corrosive and demanding environmental conditions. (6.1 x 12.8) DUAL RG6/U DE-2520 .275" X .546" 200 43 (6.9 x 13.8) Coaxial Dead-End RG11/U DE-2518 200 22 .405" (10.2) *Manufactured from stainless steel 20-12 Pulling Eye Dead-end & Accessories: Section 20 Pulling Eye Pulling Eye ™ PREFORMED Pulling Eye is the fastest, most practical ® means of installing GUY-GRIP Dead-ends at the anchor rod. The large eye is designed to avoid conflict with the chain hoist. The keeper bolt is adjustable for rod size. Pulling Eye is made of corrosion-resistant nodular iron, finished in orange vinyl coating for added durability against bad weather and rough handling. The keeper bolt is made of specially heat-treated extra high strength steel. The PREFORMED Pulling Eye capacity is 3,000 lbs. Catalog Standard Number Description Carton Anchor Rod Application PE-0300 Pulling Eye 4 Units Replacement Parts PE-A-0002 Pulling Eye: Keeper As Required PE-B-2019 Pulling Eye: Bolt As Required PE-C-0607 Pulling Eye: Nut As Required 20-13 Safety Guy Wire Dispenser 1. Fold out legs. 2. Bend legs over coil. 3. Twist at least two inches 4. Turn wire cage over and of legs together until wire pay-out from side Tuck cage is tight. end back into the cage. Safety Guy-Wire Dispenser ™ NO MORE RUNAWAYS. PREFORMED Safety of coils is necessary. Saves personnel cost (only one person Guy-Wire Dispenser is designed to provide safe, easy, to pay out a loaded coil) and reduces inventory (just one completely controlled handling and paying-out of strand universal size). coils up to 500 ft. in length, including EHS strand. It also can be used with wire, wire rope, cable, conductor, etc. PREFORMED Safety Guy-Wire Dispenser accommodates Eliminate weight lifting, handling struggle, and the hazards any size coil, provided at least two inches of the end of of “runaway” coil ends. Small and light in weight (a carton each leg can be twisted. Designed to withstand the free-fall of 50 weighs only 22 pounds), the Safety Guy-Wire Dis- impact of a 200 pound coil from 15 ft. penser occupies minimal truck space. No banding or taping Standard Typical Size Coils Catalog Number Carton Quantity Accommodated Leg Length (mm) Wire Size 7 500' ⁄ " 16 SGD-0700 50 250' ½" Strand 24" (610) 14 gauge (Standard Size) 23" by 9" Triplex Coils SGD-0701 25 500' ½" Strand 30" (762) 12 gauge (Jumbo Size) 20-14