INTERNATIONAL SERIES LINEARS Power-One produces the industry’s broadest selection of linear power The International Linear series is approved to domestic and supplies with output voltages from 5 volts through 250 volts. Rugged international regulatory standards, and is CE Marked to the Low technology and proven design merge to create quiet, highly regulated, Voltage Directive (LVD). dependable DC power. FEATURES • Worldwide AC Input Capabilities: 100/120/220/230/240 VAC • ±0.05% Output Regulation • Low Output Ripple • UL, CSA, and TÜV Approvals • Mean Time Before Failure (MTBF) in Excess of 300,000 Hours • CE marked to Low Voltage Directive • 100% Burn-In • 2 Year Warranty • Overvoltage Protection (OVP) Standard on 5V Single Outputs, Optional for other outputs under 48V SINGLE OUTPUT MODELS VOLTAGE/ CASE VOLTAGE/ CASE VOLTAGE MODEL VOLTAGE MODEL CURRENT SIZE CURRENT SIZE HA5-1.5/OVP-A 5V @ 1.5A (Note 1) B HA24-0.5-A 24V @ 0.5A (Note 2) B HB5-3/OVP-A 5V @ 3A (Note 1,5) B HB24-1.2-A 24V @ 1.2A (Note 5) B HC5-6/OVP-A 5V @ 6A (Note 1,5) C HC24-2.4-A 24V @ 2.4A (Note 5) C HN5-9/OVP-A 5V @ 9A (Note 1,5) N 24V HN24-3.6-A 24V @ 3.6A (Note 5) N 5V HD5-12/OVP-A 5V @ 12A (Note 1,5) D HD24-4.8-A 24V @ 4.8A (Note 5) D HE5-18/OVP-A 5V @ 18A (Note 1,5) E HE24-7.2-A 24V @ 7.2A (Note 5) E F5-25/OVP-A 5V @ 25A (Note 1,5,6,10) F F24-12-A 24V @ 12A (Note 2,5,6,10) F G5-35/OVP-A 5V @ 35A (Note 1,5,6,10) F HA24-0.5-A 28V @ 0.5A (Note 2) B CP197-A 5V @ 50A (Note 1,5,6) F HB28-1-A 28V @ 1A (Note 5) B HA15-0.9-A 12V @ 0.9A (Note 2) B HC28-2-A 28V @ 2A (Note 5) C HB12-1.7-A 12V @ 1.7A (Note 5) B 28V HN28-3-A 28V @ 3A (Note 5) N HC12-3.4-A 12V @ 3.4A (Note 5) C HD28-4-A 28V @ 4A (Note 5) D 12V HN12-5.1-A 12V @ 5.1A (Note 5) N HE28-6-A 28V @ 6A (Note 5) E HD12-6.8-A 12V @ 6.8A (Note 5) D F24-12-A 28V @ 10A (Note 2,5,6,10) F HE12-10.2-A 12V @ 10.2A (Note 5) E HB48-0.5-A 48V @ 0.5A B F15-15-A 12V @ 16A (Note 2,5,6,10) F HC48-1-A 48V @ 1A C 48V HA15-0.9-A 15V @ 0.9A (Note 2) B HD48-3-A 48V @ 3A (Note 5) D HB15-1.5-A 15V @ 1.5A (Note 5) B HE48-4-A 48V @ 4A (Note 5) E HC15-3-A 15V @ 3A (Note 5) C 120V HB120-0.2-A 120V @ 0.2A B 15V HN15-4.5-A 15V @ 4.5A (Note 5) N 175- 175-210V B HD15-6-A 15V @ 6A (Note 5) D HB200-0.12-A 210V @ 0.12A HE15-9-A 15V @ 9A (Note 5) E 250V HB250-0.1-A 250V @ 0.1A B F15-15-A 15V @ 15A (Note 2,5,6,10) F NOTES: 1) Overvoltage protection provided. Set at 6.2V ±0.4V. 6) With output inhibit and parallel operation master/slave capability. 2) Adjustable outputs: F15-15-A: 12-15V, F24-12-A: 24-28V, 7) With output inhibit. HA15-0.9-A: 12-15V, HA24-0.5-A: 24-28V. 8) Adjustable 3 terminal regulator. 3) Nonadjustable 3 terminal regulator. 9) Can be made into an isolated output by removing jumper W1. 4) Isolated outputs, can be referenced as positive (+) or negative (-). 10) Model requires 100 LFM forced air cooling above 75% of rated output power. 5) Remote sense provided. Rev. 04/2000 1 INTERNATIONAL SERIES LINEARS DUAL OUTPUT MODELS OUTPUT OUTPUT CASE VOLTAGE MODEL # 1 # 2 SIZE HAA5-1.5/OVP-A +5V @ 1.5A (Note 1) -5V @ 1.5A (Note 1) AA ± 5V HBB5-3/OVP-A +5V @ 3A (Note 1) -5V @ 3A (Note 1) BB HCC5-6/OVP-A 5V @ 6A (Note 1,4,5) 5V @ 6A (Note 1,4,5) CC ± 12V HAD12-0.4-A +12V @ 0.4A (Note 3) -12V @ 0.4A (Note 3) B ± 15V HAD15-0.4-A +15V @ 0.4A (Note 3) -15V @ 0.4A (Note 3) B -12V @ 1A or +12V @ 1A or HAA15-0.8-A -15V @ 0.8 or AA +15V @ 0.8A (Note 5) -5V @ 0.4A (Note 5) ± 12V -12V @ 1.7A or +12V @ 1.7A or to HBB15-1.5-A -15V @ 1.5A or BB ± +15V @ 1.5A (Note 5) 15V -5V @ 0.7A (Note 5) +12V @ 3.4A or -12V @ 3.4A or HCC15-3-A CC +15V @ 3A (Note 5) -15V @ 3A (Note 5) HDD15-5-A +12V or 15V @ 5A (Note 5) (-)12V or 15V @ 5A E +18-20V @ 0.4A or (-)18-20V @ 0.4A or HAA24-0.6-A AA +24V @ 0.6A -24V @ 0.6A ± 18V +18-20V @ 0.9A or (-)18-20V @ 0.9A or HBB24-1.2-A BB ± 24V +24V @ 1.2A -24V @ 1.2A +18-20V @ 1.8A (-)18-20V @ 1.8A HCC24-2.4-A CC +24V @ 2.4A (Note 5) -24V @ 2.4A (Note 5) 5V HAA512-A 5V @ 2A (Note 1,4,5) 12-15V @ 0.5A (Note 4) AA and HBB512-A 5V @ 3A (Note 1,4,5) 12-15V @ 1.25A (Note 4,5) BB 12V-15V HCC512-A 5V @ 6A (Note 1,4,5) 12-15V @ 2.5A (Note 4,5) CC TRIPLE OUTPUT MODELS OUTPUT OUTPUT OUTPUT CASE MODEL # 1 # 2 # 3 SIZE (-)12 to 15V @ 0.4A or HTAA-16W-A 5V @ 2A (Note 1,4) +12 to 15V @ 0.4A AA -5V @ 0.4A -12V @ 1A or +12V @ 1A or HBAA-40W-A 5V @ 3A (Note 1,4,5) -15V @ 0.8A or BAA +15V @ 0.8A (Note 5) -5V @ 0.4A (Note 5) (-)12 to 15V @ 1A or D HCAA-60W-A +5V @ 6A (Note 1,5) +12 to 15V @ 1A -5V @ 0.4A -12V @ 1.7A or +12V @ 1.7A or HCBB-75W-A 5V @ 6A (Note 1,4,5) -15V @ 1.5A or CBB +15V @ 1.5A (Note 5) -5V @ 0.7A (Note 5) -12V @ 1.7A or +12V @ 1.7A or CP131-A 5V @ 8A (Note 1,4,5) -15V @ 1.5A or 131 +15V @ 1.5A (Note 5) -5V @ 0.7A (Note 5) -12V @ 1.7A or +12V @ 1.5A or HDBB-105W-A 5V @ 12A (Note 1,4,5) -15V @ 1.5A or DBB +15V @ 1.5A (Note 5) -5V 0.7A (Note 5) +12V @ 3.4A or -12V @ 3.4A or HDCC-150W-A 5V @ 12A (Note 1,4,5) DCC +15V @ 3A (Note 5) -15V @ 3A NOTES: 1) Overvoltage protection provided. Set at 6.2V ±0.4V. 5) Remote sense provided. 2) Adjustable outputs: F15-15-A: 12-15V, F24-12-A: 24-28V, 6) With output inhibit and parallel operation master/slave capability. HA15-0.9-A: 12-15V, HA24-0.5-A: 24-28V. 7) With output inhibit. 3) Nonadjustable 3 terminal regulator. 8) Adjustable 3 terminal regulator 4) Isolated outputs, can be referenced as positive (+) or negative (-). 9) Can be made into an isolated output by removing jumper W1. 2 INTERNATIONAL SERIES LINEARS HIGH PEAK MODELS OUTPUT OUTPUT OUTPUT OUTPUT CASE MODEL # 1 # 2 # 3 #4 SIZE CP323-A* +5V @ 2A (Note 1) +12 @ 4A (Note 7) N 24V @ 1.5A/ or CP205-A* +5V @ 1A (Note 1) -5V @ 0.5A (Note 1) BAA 1.7A @ PK (Note 4) 24V @ 5A/ or CP131 CP162-A* +5V @ 3A (Note 1,5) -5V @ 0.6A (Note 1) 6APK (Note 4,5) +12V @ 2.5A/ CP510-A* +5V @ 6A (Note 1) CP510-A 7.5APK -5V @ 1.2A or 24V @ 3.5A/ CP131 CP379-A* +5V @ 6A (Note 1,5,9) -12V @ 1.2A (Note 8) 8APK (Note 4,5) 12V @ 0.5A or CP131 CP498-A* +5V @ 6A (Note 1,5) +12V @ 5A/10APK (Note 5) 5V @ 0.25A (Note 4,8) -12V @ 1A or +24V @ 2.4A/ CP503-A* +5V @ 6A (Note 1) +12V @ 1A CP131 -5V @ 0.5A 4APK (Note 9) NOTES: 1) Overvoltage protection provided. Set at 6.2V ±0.4V. 5) Remote sense provided. 2) Adjustable outputs: F15-15-A: 12-15V, F24-12-A: 24-28V, 6) With output inhibit and parallel operation master/slave capability. HA15-0.9-A: 12-15V, HA24-0.5-A: 24-28V. 7) With output inhibit. 3) Nonadjustable 3 terminal regulator. 8) Adjustable 3 terminal regulator 4) Isolated outputs, can be referenced as positive (+) or negative (-). 9) Can be made into an isolated output by removing jumper W1. * Non-stocked standards OVERVOLTAGE PROTECTION OPTIONS OVERVOLTAGE PROTECTION OPTIONS OVP SELECTION GUIDE These optional overvoltage protection modules are offered for use with MODEL CASE SIZE OVP MODULES REQUIRED Power-One’s International Series Linear power supplies. Each is user B,C,N,D (1) OVP-12 SINGLE adjustable from 6.4V to 34V. OUTPUT E,F (1) OVP-24 0.58" OVP-12 1.55" (14.732 mm) (39.37 mm) AA,B,BB,CC (1) OVP-12 protects both outputs DUAL 0.75" OUTPUT (19.05 mm) E (1) OVP-24 protects both outputs 0.56" AA,BAA,D (1) OVP-12 protects both 12V (14.224 mm) TRIPLE CBB, 131 OUTPUT through 15V outputs No. 4-40 Threaded 0.22" DBB,DCC Inserts (2 Places) (5.558 mm) N,BAA,CBB PEAK (1) OVP-12 protects any output CURRENT 131, CP340-A 1.50" not provided with built-in OVP (38.1 mm) MODELS OVP CP510-A ADJ. NOTE: Outputs with factory built-in OVP are indicated in the Voltage/Current Rating Chart for each model. OVP is not available for 48V through 250V models. 0.27" 2.75" (6.858 mm) OVP-24 (69.85 mm) 1.25" (31.75 MM) 0.62" (15.8 mm) For the Most Up-To-Date Information .156" (3.962 mm) Dia. 0.20" (5.08 mm) Mtg. Holes (2 Places) www.power-one.com www.power-one.com 24 Hours/Day—7 Days/Week 2.00" OVP (50.8 mm) ADJ. 3 INTERNATIONAL SERIES LINEARS INPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Input Voltage - AC Jumper selectable, shipped factory configured for 100 VAC Tap 87 100 110 (Note 1, 2) 120VAC operation. All models must be correctly 120 VAC Tap 104 120 132 VAC fused for proper operation. 220 VAC Tap 191 220 242 240 VAC Tap 209 240 264 Input Frequency AC input. 47 63 Hz Line Regulation Output voltage charge for a 10% line change: F case models. -0.01 +0.01 HAD12, HAD15. -1.0 +1.0 % Outputs with adjustable three terminal regulators. -0.5 +0.5 All other models. -0.05 +0.05 NOTES: 1) Derate output current 10% for 50Hz operation. 2) Input voltage tolerance for 230VAC operation is +15%, -10%. OUTPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Output Adjustment Minimum output adjustment range (Note 1). -5 +5 % Efficiency 5 volt outputs. 45 12 volt and 15 volt outputs. 55 % 24 volt and higher outputs. 60 F case models. 3.0 mVPK-PK Ripple and Noise 5 volt, 12 volt, and 15 volt models. 5.0 mVPK-PK (Note 2) All three terminal regulator outputs. 0.2 %PK-PK 24 volt through 250 volt models. 3.0mVPK-PK plus 0.02% of output voltage, max Load Regulation Output change for a 50% load change: F case models. -0.02 +0.02 HAD12, HAD15. -1 +1 % Outputs with adjustable three terminal regulators. -0.5 +0.5 All other models. -0.05 +0.05 Transient Response Recovery time, to within 1% of initial set point due to a 50% load change. 50 μS NOTES: 1) Voltages from 3 terminal regulator outputs are not adjustable on HAD12 and HAD15. 2) Full load, 20MHz bandwidth. SAFETY, REGULATORY, AND EMI SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Agency Approvals UL1950. CSA 1402 or CSA 22.2 No. 234/950. Approved EN60950 (TÜV). Dielectric Withstand Input to output. 3750 V RMS Voltage Input to ground. 3750 Electromagnetic FCC CFR title 47 Part 15 Sub-Part B - conducted. Interference EN55022 / CISPR 22 conducted. Compatible with system compliance to Level B. EN55022 / CISPR 22 radiated. Leakage Current Per EN60950 (264VAC) 23 50 μA INTERFACE SIGNALS AND INTERNAL PROTECTION PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Overvoltage Protection Provided on 5 volt output units where indicated. 5.8 6.6 V Other outputs may use optional overvoltage protectors OVP-12 and OVP-24. Remote Sense Total voltage compensation for cable losses with respect to the main output. 250 mV Provided on models where indicated. Overcurrent/Short Circuit Automatic current limit/foldback. Rated as a percentage of output power. 115 120 140 % Protection Master/Slave Operation For parallel operation of up to 6 units. Master/slave pin provided on F case models only. Contact factory for application notes. ENVIRONMENTAL SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Operating Temperature Derate output power linearly above 50°C by 3% per °C. At 100% load 0 50 °C At 40% load 70 °C Storage Temperature -40 85 °C Temperature Coefficient 0°C to 50°C (after 15 minute warm-up). 0.1 0.3 %/°C 24 hours after warm-up. -0.3 +0.3 % Shock Operating. 20 GPK Vibration Random vibration from 10Hz to 2kHz, 3 axis. 6.15 GRMS 4 (800) 678-9445 • FAX: (805) 388-0476 INTERNATIONAL SERIES LINEARS OVERALL SIZE OVERALL SIZE AA CASE 6.50" x 4.00" x 2.10" BAA CASE 10.25" x 4.00" x 2.95" (165.10 mm) x (101.60 mm) x (53.34 mm) (260.35 mm) x (101.60 mm) x (74.93 mm) 1.62" 6.50" 0.955" 10.25" (41.15 mm) (165.10 mm) (24.26 mm) (260.35 mm) 1.250" 0.50" 5.750" 0.50" 9.250" (31.75 mm) (12.70 mm) (146.05 mm) 0.87" (12.70 mm) (234.95 mm) (22.10 mm) DC Output DC Output DC Output 3.375" 3.375" 2.375" (85.73 mm) (85.73 mm) (60.20 mm) OVP Optional OVP Optional 4.00" 4.00" (101.60 mm) (101.60 mm) .06" 2.50" (1.52 mm) 0.375" (63.50 mm) 0.375" (9.53 mm) 0.57" (9.53 mm) .188 Dia Mtg. Holes (16 Places) (14.48 mm) 1.250" .188 Dia Mtg. Holes (8 Places) (31.75 mm) .420" 0.450" (10.67 mm) (11.43 mm) WEIGHT: 2.5 LBS WEIGHT: 5 LBS (2.25 kg) (1.14 kg) 0.75" 0.75" (19.05 mm) (19.05 mm) OVERALL SIZE OVERALL SIZE B CASE 4.87" x 4.00" x 2.10" C CASE 5.62" x 4.87" x 2.95" (123.70 mm) x (101.60 mm) x (53.34 mm) (142.75 mm) x (123.70 mm) x (74.93 mm) 1.62" 4.87" 2.50" 5.62" (41.15 mm) (123.70 mm) (63.50 mm) (142.75 mm) 1.025" 0.250" 4.125" 0.87" (26.04 mm) 1.250" 4.875" 0.50" (6.35 mm) (22.10 mm) (104.78 mm) (31.75 mm) (12.70 mm) (123.83 mm) 0.794" OVP (20.17 mm) Optional DC Output 3.375" DC Output 4.125" (85.73 mm) 2.601" (104.78 mm) (66.07 mm) 2.85" 4.00" 4.87" (72.39 mm) (101.60 mm) OVP Optional (123.70 mm) .06" OVP Optional 0.375" (1.52 mm) 0.665" 0.75" (9.53 mm) (16.89 mm) 0.57" .50" (19.05 mm) (14.48 mm) .188 Dia Mtg. Holes (18 Places) .188 Dia Mtg. Holes (12 Places) (12.7 mm) 1.250" (31.75 mm) .420" (10.67 mm) WEIGHT: 2.2 LBS .450" WEIGHT: 4.25 LBS (1.0 kg) (11.43 mm) (1.93 kg) .75" (19.05 mm) 0.75" (19.05 mm) OVERALL SIZE OVERALL SIZE BB CASE 7.00" x 4.87" x 2.95" CC CASE 9.38" x 4.87" x 3.28" (177.80 mm) x (123.70 mm) x (74.93 mm) (238.25 mm) x (123.70 mm) x (83.31 mm) 2.50" 7.00" 9.38" 1.025" (63.50 mm) (177.80 mm) (238.25 mm) (26.03 mm) 0.50" 1.250" 6.250" 0.50" 8.375" 1.250" 0.75" (12.70 mm) (31.75 mm) (158.75 mm) (31.75 mm) (12.70 mm) (212.73 mm) (19.05 mm) DC Output DC Output 4.125" 4.125" (104.78 mm) (104.78 mm) AC Input 2.85" 4.87" OVP Optional (72.39 mm) 4.88" (123.70 mm) (123.95 mm) OVP Optional 2.75" 0.665" (69.85 mm) 0.75" (16.89 mm) (19.05 mm) 0.050" 0.50" .188 Dia Mtg. Holes (12 Places) 1.250" .188 Dia Mtg. Holes (16 Places) (12.70 mm) (12.70 mm) (31.75 mm) 1.250" (31.75 mm) 0.450" 0.525" (11.43 mm) WEIGHT: 4.4 LBS (13.34 mm) WEIGHT: 7 LBS (2.0 kg) (3.15 kg) 0.75" 0.75" (19.05 mm) (19.05 mm) 5 AC Input AC Input AC Input AC Input AC Input INTERNATIONAL SERIES LINEARS OVERALL SIZE OVERALL SIZE DCC CASE CBB CASE 11.00" x 4.87" x 3.28" 15.00" x 4.88" x 4.55" (279.40 mm) x (123.70 mm) x (83.91 mm) (381.00 mm) x (123.95 mm) x (115.57 mm) 0.50" 0.75" (12.70 mm) 11.00" (19.05 mm) (279.40 mm) 15.00" 1.250" 7.50" (381.00 mm) (190.50 mm) (31.75 mm) 2.50" 0.75" 0.50" 14.00" (12.70 mm) (63.50 mm) (19.05 mm) (355.60 mm) DC Output DC Output DC Output DC Output 4.13" AC Input OVP Optional 4.87" 4.125" (104.90 mm) (123.70 mm) (104.78 mm) OVP Optional 0.50" 3.75" (12.70 mm) 4.88" (95.25 mm) (123.95 mm) .188 Dia Mtg. Holes (16 Places) 2.50 .188 Dia Mtg. Holes (16 Places) 0.50" (63.50 mm) (12.70) 2.75" (69.85 mm) 0.80" WEIGHT: 12 LBS (20.32 mm) 0.80" 1.250" (5.40 kg) (20.32 mm) (31.75 mm) WEIGHT: 8 LBS (3.60 kg) 0.75" (19.05 mm) 0.75" (19.05 mm) OVERALL SIZE OVERALL SIZE D CASE E CASE 14.00" x 4.87" x 3.53" 9.00" x 4.87" x 3.28" (355.60 mm) x (123.70 mm) x (89.66 mm) (228.60 mm) x (123.70 mm) x (83.31 mm) 9.00" (228.60 mm) 14.00" 0.50" 0.75" (355.60 mm) 8.000" 1.250" (12.70 mm) 0.50" (203.20 mm) (19.05 mm) 1.250" 0.75" (31.75 mm) 13.000" (12.70 mm) (330.20 mm) (31.75 mm) (19.05 mm) DC Output DC Output 4.125" OVP Optional AC Input AC Input 4.125" (104.78 mm) OVP Optional (104.78 mm) 4.87" (123.70 mm) 0.50" 2.75" 4.87" (12.70 mm) (69.85 mm) (123.70 mm) 2.75" .188 Dia Mtg. Holes (16 Places) 0.50" (69.85 mm) .188 Dia Mtg. Holes (16 Places) (12.70 mm) 1.250" 1.250" (31.75 mm) (31.75 mm) 0.525" WEIGHT: 10 LBS .130" (13.34 mm) WEIGHT: 7.5 LBS (3.30 mm) (4.50 kg) (3.38 kg) 0.75" 0.650" 0.75" (19.05 mm) (16.51 mm) (19.05 mm) OVERALL SIZE OVERALL SIZE DBB CASE F CASE 14.25" x 4.87" x 3.38" 16.75" x 4.88" x 5.00" (361.95 mm) x (123.70 mm) x (85.85 mm) (425.5 mm) x (123.95 mm) x (127.00 mm) 3.375" 1.250" 14.25" 16.75" (31.75 mm) (9.53 mm) (361.95 mm) (425.5 mm) 0.75" 16.00" 2.50" 8.750" 0.50" 0.375" (12.70 mm) (19.05 mm) (406.40 mm) (63.50 mm) (222.25 mm) (9.53 mm) DC Output DC Output DC Output AC Input 4.87" 4.125" OVP Optional 4.125" AC Input (123.70 mm) (104.80 mm) OVP Optional (104.78 mm) 3.50" 0.375" 2.75" (88.90 mm) 4.88" (9.53 mm) 0.50" (69.85 mm) (123.95 mm) Note: AC input on far side. (12.70 mm) 0.375" 0.218" (5.5mm) Dia Mtg. Holes (16 Places) (9.53 mm) .188 Dia Mtg. Holes (16 Places) 1.250" (31.75 mm) 0.625" 1.50" WEIGHT: 19 LBS (15.88 mm) (38.10 mm) WEIGHT: 11 LBS (8.55 kg) (4.95 kg) Heatsink Area. 2.50" (63.50 mm) 0.75" (19.05 mm) 6 AC Input INTERNATIONAL SERIES LINEARS OVERALL SIZE OVERALL SIZE N CASE CP510-A CASE 8.25" x 4.87" x 3.28" 7.00" x 4.87" x 3.28" (209.55 mm) x (123.70 mm) x (83.31 mm) (177.80 mm) x (123.70 mm) x (83.31 mm) 8.25" (209.55 mm) 0.75" 7.00" 1.25" .375" 7.50" (19.05 mm) (177.80 mm) (31.75 mm) (9.53 mm) (190.50 mm) 0.75" .375" 1.250" 6.250" (31.75 mm) (19.05 mm) (9.53 mm) (158.75 mm) DC Output DC Output 4.125" (104.78 mm) OVP Optional 4.125" (104.78 mm) 4.87" (123.70 mm) 4.87" OVP Optional (123.70 mm) 2.75" (69.85 mm) 2.75" 0.50" (69.85 mm) .188 Dia Mtg. Holes (16 Places) 1.25" 0.50" (12.70 mm) .188 Dia Mtg. Holes (16 Places) 1.250" (31.75 mm) (12.70 mm) (31.75 mm) 0.525" 0.525" WEIGHT: 7.5 LBS (13.34 mm) (13.34 mm) WEIGHT: 6 LBS (3.38 kg) (2.70 kg) 0.75" 0.75" (19.05 mm) (19.05 mm) OVERALL SIZE CP131 CASE 11.00" x 4.87" x 3.20" (279.40 mm) x (123.70 mm) x (81.28 mm) 1.250" 11.00" (31.75 mm) (279.40 mm) 0.75" 7.00" 0.50" (19.05 mm) (177.80 mm) (12.70 mm) DC Output DC Output For the Most Up-To-Date Information 4.87" 4.125" (123.70 mm) (104.78 mm) OVP Optional www.power-one.com www.power-one.com 2.75" .50" (69.85 mm) (12.70 mm) 24 Hours/Day—7 Days/Week .188 Dia Mtg. Holes (16 Places) 1.250" (31.75 mm) 0.450" (11.43 mm) WEIGHT: 9 LBS (4.05 kg) 0.75" (19.05 mm) NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 7 AC Input AC Input AC Input