POTTER & BRUMFIELD/TYCO ELECTRONICS W28-SQ11A-10
Description
CIRCUIT BREAK 10A W/SWITCH
Part Number
W28-SQ11A-10
Price
Request Quote
Manufacturer
POTTER & BRUMFIELD/TYCO ELECTRONICS
Lead Time
Request Quote
Category
PRODUCTS - W
Datasheet
Extracted Text
W28 series Switchable or Push to Reset Fuseholder-Type Thermal Circuit Breaker Note: VDE not available on 16A and 20A W28 Switch/Breaker Push-to-Reset Breaker Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure a product meets the requirements for a given application. Features Resettable Overload Capacity: Six times rated current for 0.25 through 2 amp models. Ten times rated current for • Switchable version combines on-off switch and circuit protection in a 3 through 20 amp models. single unit. Reset Time: 180 seconds max. for 0.25 through 2 amp models. 10 to 60 • Approved to many international standards (push to reset type). • Replaces SLOW-BLOW glass cartridge fuse. seconds for 3 through 20 amp models. • Labor-saving snap-in mounting. • Button extends for visual trip indication on push to reset model. • Rocker on switchable model moves to “overload” position upon trip. Typical Resistance vs. Current Rating @ +25° C Agency Approvals Current Typical Current Typical Rating Resistance Rating Resistance W28-X series is UL 1077 Recognized as Supplementary Protectors, File in Amps in Ohms in Amps in Ohms E69543, and CSA Certified as Appliance Component Protectors, File LR15734. W28-X breakers (up through 15 amps) are VDE approved for 0.25 14.0 8.0 0.016 use in office equipment and provide 8mm isolation. 0.50 3.55 9.0 0.014 0.75 2.0 10.0 0.011 W28-S is UL 1077 Recognized, and CSA Certified for models up to and 1.0 0.89 11.0 0.01 including 15 amps. 2.0 0.17 12.0 0.009 3.0 0.069 13.0 0.009 4.0 0.043 14.0 0.007 5.0 0.030 15.0 0.007 6.0 0.026 16.0 0.007 7.0 0.017 20.0 0.006 Mechanical/Environmental Data Electrical Data @ 25°C Calibration: Will continuously carry 100% of rating. Endurance Cycling(switchable type): > 6,000 cycles at 100% of rating or 3-20 amp models – may trip between 101% and 134%, but 10,000 mechanical cycles. must trip at 135% of rating within one hour at +25°C. Termination: .250” (6.35mm) quick connects. Soldering to terminals is 0.25-2 amp models – may trip between 101% and 174%, but not recommended. must trip at 175% of rating within one hour at +25°C. Mounting: Snaps into panel from front. See Recommended Panel Cutouts. Dielectric Strength: Over 1,500 volts RMS. Approximate Weight: 0.35 oz. (10g). Maximum Operating Voltages: 32VDC; 250VAC, 50/60 Hz. Interrupt Capacity: 1,000 amps at 250VAC, 50/60 Hz. and 32VDC in accordance with UL standard 1077. Time vs. Current Trip Curve @ +25°C Ambient Compensation Chart 1.40 1.40 1000 (A) All 3-20 Amp Models (B) All 0.25-2 Amp Models 1.30 1.30 Overload Trip Times Overload Trip Times 900 100% No Trip 100% No Trip 1.20 1.20 135% Trip in 1 hour 175% Trip in 1 hour 800 200% 2.2-15.0 Sec. 200% 4.5-28.0 Sec. 1.10 1.10 400% 0.55-1.8 Sec. 400% 1.0-6.5 Sec. 600% 0.27-0.7 Sec. 600% 0.4-4.0 Sec. 700 800% 0.17-0.45 Sec. 1.00 1.00 (A) 1000% 0.12-0.3 Sec. 600 0.90 0.90 500 0.80 0.80 0.70 0.70 400 (B) 0.60 0.60 300 ––2200––1100 00 1102 0203 0304 0405 0506 0600 Ambient Temperature In Degrees Centigrade Ambient Temperature In Degrees Centigrade ( (° °C) C) 200 175 Dotted portion applies to W28X type only. 135 100 To use this chart: Read up from the ambient temperature to the curve, and across to find a 0 correction factor. Multiply the breaker rating by the .1 1 10 100 1000 correction factor to determine the compensated rating. Calculate the overloads in terms of the Time In Seconds compensated rating to use the published trip curve. Do not use these devices outside their specified operating temperature ranges. Load Current As A Percent Of Breaker Rating Correction Factor Correction Factor Ordering Information Typical Part Number B W28 -X Q 1 A -5 1. Designator: W = Circuit breaker 2. Series Number: 28 = Single Pole Fuseholder Type 3. Circuit Function: X = Series Trip, Push-to-Reset Button S = Series Trip, Switchable Rocker 4. Terminal Type and Mounting: Q = .250” (6.35mm) Quick Connect will mount in .032”-.062” (.813mm – 1.574mm) thick panel. T = .250” (6.35mm) Quick Connect will mount in .075”-.105” (1.905mm – 2.667mm) thick panel. For panel thicknesses other than above, order “Q” type and 55-025B Internal Tooth Push-On Lockwasher. 5. Bezel Color: 1 = Black with White Rate Marking † 11 = Black with No Rate Marking 2 = Red with Black Rate Marking † 21 = Red with No Rate Marking † Not available with Circuit Function “S” . B = Black with White “Reset” Marked On Bezel (No Rate Marking) † Consult factory for other bezel colors. 6. Button Color: A = Black B = Red Consult factory for other button colors. 7. Amp Rating: 0.25† 1† 4 7 10 13 16 0.50† 2† 5 8 11 14 20* † Not available with Circuit Function “S” . 0.75† 3 6 9 12 15 * Contact factory for availability. Outline Dimensions Push-to-Reset Type Switchable Type 1.535 MAX. .19 .76 MAX. (38.99) (4.83) (19.31) ROCKER POSITION DURING OVERLOAD I I .54 MAX. (TRIP) CONDITION .76 MAX. (13.716) (19.31) O O .325 MAX. (8.26) .37 AMP RATING AMP RATING (9.4) .625 MAX. (15.875) .250 x .032 (6.35 x .813) QUICK CONNECT TERMINALS Recommended Panel Cutouts .570-.575 .540-.550 (14.478-14.605) (13.716-13.970) .970 DIA. (25.64) .625-.635 .625-.635 .625-.635 (15.875-16.129) (15.875-16.129) (15.875-16.129) 55-025B INTERNAL TOOTH PUSH-ON LOCKWASHER Note: 1. Soldering to terminals is not recommended. For panels greater than .105” (2.67) thickness 2. Recommended Panel Thickness: Style Q: .032” - .062” (.813 mm - 1.574 mm) Style T: .075” - .105” (1.905 mm - 2.667 mm) 3. Internal tooth push-on washer available for panel thickness not covered above. Part No. 55-025B. Tyco Electronics Corporation Harrisburg, PA 17105 Specifications and availability subject to change without notice. 13C9280 Printed in U.S.A. IH/5-02
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the W28-SQ11A-10 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods