POTTER & BRUMFIELD/TYCO ELECTRONICS V23026A1001B201
Description
RELAY PC MNT SPDT 1A 5VDC
Part Number
V23026A1001B201
Price
Request Quote
Manufacturer
POTTER & BRUMFIELD/TYCO ELECTRONICS
Lead Time
Request Quote
Category
PRODUCTS - V
Datasheet
Extracted Text
The Best Relaytion P1 Relay ISO 9001 108-98009 Rev. C EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 P1 Relay V23026 1 pole telecom and signal relay, polarized, Through Hole Type (THT) or Surface Mount Technology (SMT), Relay types: non-latching with 1 coil latching with 2 coils latching with 1 coil Features – Directly triggerable with TTL standard modules such as ALS, HCT and ACT – Slim line 13.5 x 7.85 mm, 0.531 x 0.309 inch – Switching current 1 A – 1 changeover contact (1 form C / SPDT) – Bifurcated contacts – Immersion cleanable – High sensitivity results in low nominal power consumption 65 to 130 mW for non-latching 30 to 150 mW for latching – Surge voltage resistance between contact and coil: - 2.5 kV (2 / 10 µsec) meets the Bellcore Requirement GR-1089 - 1.5 kV (10 / 160 µsec) meets FCC Part 68 Typical applications – Automotive equipment CAN bus, imobilizer – Office equipment – Measurement and control equipment – Medical equipment – Safety equipment Options – FCC version on request. Testing of open contacts with surge voltage in accordance with FCC 68.302 (1.5 kV, 10/160 µsec) European Directive conformance: P1 relay product conformance according to: - Directive 2000/53/EC: ELV (End of Life of Vehicles) - Directive 2002/95/EC: ROHS (Restrictions of the use of certain hazardous substances in electrical and electronic equipment) Compliance is evidenced by written declaration from all raw material suppliers. Tyco Electronics AXICOM only has responsibility for the proper processing of these materials. Confirmation is valid for date codes ≥ 0429 UL File No. E 111441 Basic insulation coil/contacts according to IEC/EN 60950 Clearance > 0.75 mm Creepage distance > 0.75 mm Page 2 (10) 108-98009 Rev. C P1 Relay V23026 Dimensions V23026-x1xxx-B201 THT SMT mm inch mm inch L 13.0 ± 0.1 0.512 ± 0.004 13.4 ± 0.1 0.528 ± 0.004 W 7.6 ± 0.1 0.299 ± 0.004 7.75 ± 0.1 0.305 ± 0.004 H 6.9 - 0.2 0.272 - 0.008 8.0 - 0.2 0.315 - 0.008 T 3.5 - 0.2 0.138 -0.008 N/A N/A T1 N/A N/A 10.9 - 0.5 0.429 - 0.020 T2 5.08 ± 0.15 0.200 ± 0.006 5.08 ± 0.15 0.200 ± 0.006 S 0.3 ± 0.1 0.012 ±0.004 N/A N/A S1 N/A N/A 0.85 ± 0.1 0.033 ±0.004 S2 N/A N/A 0.2 - 0.15 0.008 ±0.006 THT Version SMT Version Mounting hole layout Solder pad layout View onto the component side of the PCB View onto the component side of the PCB Terminal assignment Relay - top view Contact release or reset condition, coil polarity to set the relay Non-latching type, Latching type, 1 coil Latching type, 2 coils reset condition not energized condition reset condition Contacts are shown in reset condition. Both coils can be used either as set or reset coil. Page 3 (10) 108-98009 Rev. C P1 Relay V23026 Coil Data (values at 23°C) Ordering Information Nominal Operate/set voltage range Release/ Coil Coil Relay Tyco part voltage reset voltage power Resistance code number Unom Minimum Minimum Maximum voltage U voltage U min max Vdc Vdc Vdc Vdc mW Ω / ± 10 % THT, non-latching, 1 coil 3 2.25 8.80 0.30 66 137 V23026A1006B201 1-1393774-7 5 3.75 14.50 0.50 68 370 V23026A1001B201 0-1393774-1 9 6.75 25.50 0.90 70 1165 V23026A1005B201 1-1393774-5 12 9.00 35.00 1.20 64 2250 V23026A1002B201 0-1393774-2 24 18.00 50.00 2.40 128 4500 V23026A1004B201 1-1393774-2 THT, latching, 2 coils (coils I and II are identical) 3 2.25 8.55 2.25 69 130 V23026B1106B201 0-1393775-3 5 3.75 14.75 3.75 64 390 V23026B1101B201 3-1393774-4 9 6.75 26.00 6.75 68 1200 V23026B1105B201 0-1393775-2 12 9.00 29.00 9.00 96 1500 V23026B1102B201 3-1393774-5 24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 W) THT, latching, 1 coil 3 2.25 13.00 2.25 30 300 V23026C1056B201 2-1393774-6 5 3.75 20.00 3.75 34 740 V23026C1051B201 2-1393774-0 9 6.75 35.00 6.75 38 2160 V23026C1057B201 2-1393774-7 12 9.00 50.00 9.00 32 4500 V23026C1052B201 2-1393774-1 24 18.00 50.00 18.00 128 4500 V23026C1054B201 2-1393774-4 SMT, non-latching, 1 coil 3 2.25 8.00 0.30 80 113 V23026D1026B201 0-1393776-8 5 3.75 13.30 0.50 80 313 V23026D1021B201 0-1393776-3 9 6.75 24.00 0.90 80 1015 V23026D1025B201 0-1422015-9 12 9.00 35.00 1.20 80 1800 V23026D1022B201 0-1393776-4 24 18.00 50.00 2.40 128 4500 V23026D1024B201 0-1393776-7 SMT, latching, 2 coils (coils I and II are identical) 3 2.25 8.55 2.25 69 130 V23026E1106B201 0-1393777-3 5 3.75 14.75 3.75 64 390 V23026E1101B201 0-1422015-6 9 6.75 26.00 6.75 68 1200 V23026E1105B201 0-1393777-2 12 9.00 29.00 9.00 96 1500 V23026E1102B201 0-1393776-9 24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 W) SMT, latching, 1coil 5 3.75 20.00 3.75 34 740 V23026F1051B201 0-1422015-8 12 9.00 50.00 9.00 32 4500 V23026F1052B201 4-1393774-3 24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (4500 W) Further coil versions e.g. 1.5 V, 9 V and 15 V are available on request. Coil operating range 65 mW 130 mW Umax. at 0 A Umax. at - 1 A Umax. at 0 A Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [°C] Page 4 (10) 108-98009 Rev. C Coil Voltage [U/Unom] P1 Relay V23026 65 mW Latching Umax. - 5 % coil duty at 1 A 32 mW Latching Umax. - 100 % coil duty at 0 A U = Nominal coil voltage nom Umax. - 5 % coil duty at 0 A U = Upper limit of the operative range of max. the coil voltage (limiting voltage) when coils are continously energized Unom. nominal coil voltage U = Lower limit of the operative range of op. min. the coil voltage (reliable operate voltage) Uset min. U = Lower limit of the operative range of rel. min. the coil voltage (reliable release voltage) Ambient Temperature [°C] Contact Data Number of contacts and type 1 changeover contact Contact assembly Bifurcated contact Contact material Palladium nickel, gold-rhodium covered Limiting continuous current at max. ambient temperature 1 A Maximum switching current 1 A Maximum swichting voltage 125 Vdc 150 Vac Maximum switching capacity 30 W, 60 VA Thermoelectric potential < 100 mV Initial contact resistance / measuring condition: 10 mA / 20 mV < 50 mW 7 Electrical endurance at 12 V / 10 mA typ. 5 x 10 operations 7 at 6 V / 100 mA typ. 1 x 10 operations 4 at 30 V / 1000 mA typ. 1 x 10 operations 9 Mechanical endurance typ. 10 operations UL/CSA ratings 30 Vdc / 1 A 65 Vdc / 0.46 A 150 Vac / 0.46 A Max. DC load breaking capacity Page 5 (10) 108-98009 Rev. C Coil Voltage [U/Unom] P1 Relay V23026 Insulation 9 Insulation resistance at 500 VDC > 10 W Dielectric test voltage (1 min) between coil and contacts (Relay with 1 coil) 1500 Vrms between open contacts 500 Vrms Surge voltage resistance according to Bellcore TR-NWT-001089 (2 / 10 ms) between coil and contacts (Relay with 1 coil) 2500 V between open contacts on request 2000 V according to FCC 68 (10 / 160 ms) between coil and contacts (Relay with 1 coil) 1500 V between open contacts on request 1500 V Insulation according to IEC / EN 60950 Basic insulation Clearance 0.75 mm Creepage distance 0.75 mm High Frequency Data Capacitance between coil and contacts max. 6 pF between open contacts max. 5 pF RF Characteristics Isolation at 100 / 900 MHz - 30.0 dB / - 18.0 dB Insertion loss at 100 / 900 MHz - 0.12 dB / - 1.9 dB V.S.W.R. at 100 / 900 MHz 1.06 / 1.75 General data Operate time at U typ. / max. 1 ms / 2 ms nom Reset time (latching) at U , typ. / max. 1 ms / 2 ms nom Release time without diode in parallel (non-latching), typ. / max. 0.4 ms / 1 ms Release time with diode in parallel (non-latching), typ. / max. 1.2 ms / 2 ms Bounce time at closing contact, typ. / max. 1 ms / 3 ms Maximum switching rate without load 200 operations/s Ambient temperature -40° C ... +70° C, +85° C on request Thermal resistance < 130 K/W Maximum permissible coil temperature 85° C Vibration resistance (function) 20 G, 200 to 2000 Hz 40 G, 10 to 200 Hz Shock resistance, half sinus, 11 ms 50 G (function) Degree of protection / Environmental protection immersion cleanable, IP 67 / RT III Needle flame test application time 20 s, burning time < 15 s Mounting position any Processing information Ultrasonic cleaning possible Weight (mass) max. 2 g Terminal surface SnCu 0.7 Resistance to soldering heat 260° C / 10 s All data refers to 23° C unless otherwise specified. Page 6 (10) 108-98009 Rev. C P1 Relay V23026 Recommended soldering conditions Soldering conditions according CECC 00802 Note: Internal relay termperature should not exceed 210° C 10 sec 20 - 40 sec Full line: typical Dotted line: process limits max. 235° C 215° C 200° C ca. 40 sec 180° C 180° C 130° C 130° C forced external preheating cooling 100° C Full line: typical Dotted line: process limits Time (s) Time (s) Vapor Phase Soldering: Temperature/Time Profile Infrared Soldering: Temperature/Time Profile (Lead Temperature) (Lead Temperature) Page 7 (10) 108-98009 Rev. C Temperature °C Temperature °C P1 Relay V23026 Dimensions in mm Packing Tube for THT version - 40 relays per tube, 2000 relays per box Tape and reel for SMT version - 480 relays per reel, 2400 per box Reel dimension Page 8 (10) 108-98009 Rev. C P1 Relay V23026 IM Relays D2n Relays th nd 4 generation slim line – low profile polarized 2 c/o telecom relay with 2 generation non polarized 2 c/o relay for telecom and various bifurcated contacts, available as non latching or latching relay with other applications. Nominal voltage range from 3 ... 48 V, coil power 1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption consumption from 150 .... 500 mW. The D2n relay is capable to of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay switch currents up to 3 A. Dielectric strength fulfills the requirements is available as through hole and surface mount type (J-Legs and Gull according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric 20 x10 mm board space and 11,5 mm height. strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is CECC/IECQ approved and certified in accordance with IEC/EN 60950 P1 Relays and UL1950. Dimensions approx. 10 x 6 mm board space and Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for 5.65 mm height. a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay P2 Relays is available as through hole or surface mount type and capable to rd 3 generation polarized 2 c/o telecom relay with bifurcated contacts, switch currents up to 1 A. Dielectric strength fulfills the requirements available as non latching or latching relay with 1 or 2 coils. Nominal according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. voltage range from 3 ... 24 V, coil power consumption 140 mW, 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for latching relays with 1 coil 70 mW. The P2 Relay is available as through SMT version. hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). W11 Relays Dimensions approx. 15 x 7,5 mm board space and 10 mm height. Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch FX Relays currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. rd 3 generation polarized 2 c/o telecom relay with bifurcated contacts, 15,6 x 10,6 mm board space and 11,5 mm height. available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching Reed Relays relays with 1 coil 100 mW. The FX2 relay is available as through hole High sensitive, non polarized relay for telecom and various other type and capable to switch loads up to 60 W/62,5 VA. Dielectric applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal strength fulfills the Bellcore requirements according GR 1089 (2,5 kV voltage range from 5 ... 24 V, coil power consumption 50...280 mW – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/ for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays IECQ approved and certified in accordance with IEC/EN 60950 and are available in DIP or SIL housing and capable to switch currents up to UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric height. strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. FT2 / FU2 Relays rd 3 generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power Cradle Relays st consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as Extremely reliable and mature relay family of 1 generation for various through hole and surface mount type. Dielectric strength fulfills the signal switching applications. Available as non polarized, polarized Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC / latching and relay with AC coil. The benefit is the possibility of part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved combining various contact sets from 1 up to 6 poles, single and and certified in accordance with IEC/EN 60950 and UL1950. bifurcated contacts, different contact materials with a coil voltage Dimensions approx. 15 x 7,5 mm board space and 10 mm height. range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly FP2 Relays guided (linked) contact sets optional. Dielectric strength 500 Vrms. rd 3 generation polarized 2 c/o telecom relay with bifurcated contacts, Dimensions from approx. 19 x 24 to 19x35 mm board space and available as non latching or latching relay with 1 or 2 coils. Nominal 30 mm height. voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as Other Relays through hole type and capable to switch loads up to We offer a variety of different relay families for maintenance and 30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / replacement purposes. These relays are up to 60 years old now, such 160 µs). The FP2 is CECC/IECQ approved. Dimensions approx. as Card Relay SN (V23030 / V23031 series), Small General Purpose 14 x 9 mm board space and 5 mm height. Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. MT2 / MT4 nd 2 generation non polarized, non latching 2 c/o and 4 c/o telecom and HF3 Relay signal relay with bifurcated contacts. Nominal voltage range from 4.5 ... High performance low cost RF relay with excellent RF characteristics. 48 V, coil power consumption 150/200/300/400 and Available with an impedance of 50 and 75 Ohm. Suitable for frequen- 550 mW, and 300 mW (MT4). Dielectric strength fulfills the cies up to 3 GHz. Actually smallest RF relay available combining small requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both size, excellent RF performance and SMD solderability. Available as non and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) latching or latching relay with 1 or 2 coils and a nominal coil voltage the MT4 only. range from 3 ... 24 V, coil power consumption 140 mW, latching relays Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm. MT4 approx. 20 x15 mm board space and 11 mm height. Page 9 (10) 108-98009 Rev. C Tyco Electronics AXICOM Ltd. Seestrasse 295 - P.O. Box 220 CH-8804 Au-Wädenswil / Switzerland Phone +41 1 782 9111 Fax +41 1 782 9080 E-mail: axicom@tycoelectronics.com Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com Tyco Electronics EC Trutnov s.r.o. Komenského 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +001 800-522-6752 Page 10 (10) 108-98009 Rev. C
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the V23026A1001B201 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods