Catalog 1308242 Issued 3-03 P&B KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC File E22575 File LR15734 0435 Registration 1792 (KUIP) 0435 Registration 1792 (KUGP) License 81.12102.01 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 25°C Features • AC coils: 6-240VAC, 50/60 Hz. DC: 6-110VDC. Voltage: 6 to 110VDC and 6 to 240VAC. Nominal Coil Power: • Contact arrangement up to 4PDT. • Wide selection of termination and mounting styles. DC Coils: 1.2 Watts - KUP, KUIP, KUMP, 1 - 3 pole; KUEP, 1 pole. DC Coils: 1.8 Watts - KUP, 4 pole; KUEP, 2 pole; KUGP. • PC terminals available. • Push to test button and indicator lamps. AC Coils: 2.0VA - KUP, KUIP, 1 - 2 pole; KUEP, 1 pole. AC Coils: 2.7VA - KUP, KUIP, 3 pole; KUEP, 2 pole; KUGP, KUMP. • KUEP incorporates a blow out magnet for high voltage DC switching. • KUIP/KUGP are VDE approved. • Complete line of sockets and DIN rail. • Class B coil insulation. Coil Data DC Volts 1.2 Watt 1.8 Watt Contact Data @ 25°C Nominal DC Ohms ± 10% Nom. I ma DC Ohms ± 10% Nom. I ma Arrangements: See respective ordering information table. 5 21 238 14 360 Materials: Fine silver (5 amp) silver-cadmium oxide (10 amp). 6 32.1 187 20 300 Gold flash available as standard. 12 120 100 80 150 Gold diffused and gold alloy on special order. 24 472 51 320 75 Expected Mechanical Life: 48 1,800 26.7 1,260 38 110 10,000 11 6,720 16 Contact Ratings AC Volts 2VA 2.7VA Material Arrangement UL/CSA Ratings Expected Nominal DC Ohms ± 15% Nom. I ma DC Ohms ± 15% Nom. I ma Life 6 6 335 4.2 460 12 24 168 18 230 Fine All 5 amps @ 28VDC or 240VAC 24 85 84 72 115 Silver 80% PF, 2.5 amp tungsten 120 2,250 17.5 1,700 24 @120VAC, 1/2 amp @ 120VDC. 100,000 240 9,110 8.75 7,200 12 1/6 HP @120VAC, 1/3 HP @ 240VAC, 5 FLA, 15 LRA @ 250VAC (FLA covered by 30,000 operations). Silver- 1-2 Pole 10 amps @ 28VDC or 240VAC, Cadmium KUP 80% PF, 5 amp tungsten @ Operate Data @ 25°C Oxide KUIP 120VAC, 3A 600VAC, 1/2 amp Must Operate Voltage: KUGP @ 120VDC. 100,000 DC Coils: 75% of nominal voltage or less. KUEP 1/3 HP @ 120VAC, 1/2 HP @ AC Coils: 85% of nominal voltage or less. All KUMP 240, 480, and 600VAC, 10 FLA Operating Time (Excluding Bounce): 30 LRA @ 120VAC, 5 FLA, 15 milliseconds, typical, at nominal voltage. 15 LRA @ 250VAC.(FLA ratings Release Time (Excluding Bounce): covered by 30,000 operations) 10 milliseconds, typical, at nominal voltage. KUMP 15 amp @ 277VAC, 80% PF KUM KUMP 100,000 3 Pole 10 amp @ 28VDC or 120VAC, KUP 80% PF, 6 2/3 amp @ 240VAC, KUIP 80% PF 100,000 4 Pole 10 amp per pole not to exceed Environmental Data 30 amp total @ 28VDC, 120VAC, Temperature Range: 80% PF, 6 2/3 amp @ 240VAC, Operating: Enclosed Relays: -45°C to maximum listed in table below. 80% PF 100,000 Open Relays: Add 15°C to maximum listed. KUEP SPST-NO 10 amp @ 150VDC Max C° +45°C +50°C +55°C +70°C +75°C +80°C +95°C KUEP KUP AC DC AC DC 2PST-NO 5 amp @ 150VDC 3-4 pole 4 pole 1-2 pole 1-3 pole KUEP 2PDT 3 amp @ 150VDC 100,000 KUIP AC AC DC 3 pole 1-2 pole 1-3 pole (All other AC ratings apply KUEP.) KUGP AC DC 2 pole 2 pole Initial Dielectric Strength KUEP AC DC AC DC 2 pole 2 pole 1 pole 1 pole Between Open Contacts: 1,200V rms; KUGP, 3,500V rms. KUMP AC AC DC Between Adjacent Contacts: 2,200V rms. 3 pole 1-2 pole 1-3 pole Between Contacts and Coil: 2,200V rms; KUGP, KUIP, 3,750V rms. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 723 specified. Refer to inside back cover. 2.0 VA 60 Hz. COIL 2.7 VA 60 Hz. COIL 1.8 Watt DC Coil 1.2 Watt DC Coil Catalog 1308242 Issued 3-03 P&B Environmental Data (Continued) Mechanical Data Maximum Allowable Ambient Temperature vs. Voltage (KUP enclosed) Termination: Quick connect, solder and PC board. 75° 75° Enclosure: Clear polycarbonate dust cover. 70° Weight: 3.0 oz. (85g) approximately. 70° 60° 60° 50° 50° 40° 40° 30° 30° 20° 20° 100 110 120 130 140 100 110 120 130 140 150 160 % of Nominal Voltage DC % Of Nominal 60 Hz. Voltage Ordering Information Typical Part No. B KU -14 A 1 5 F -120 1. Basic Series & Type: KUP KU = Basic open relay. KUP = Basic enclosed relay. 2. Contact Arrangement: 1 = 1A (SPST-NO) 14 = 3C (3PDT) 5 = 1C (SPDT) 17 = 4C (4PDT) 11 = 2C (DPDT) 3. Coil Input: A = AC 50/60 Hz. D = DC 4. Mountings: Type KU KUP (through 3 poles) KUP (4 pole models) Codes 1,2,3,4,5, Available 1,3,4 A,E,T 1,3,5,A,E OPEN STYLE 1 = PLAIN CASE; 1 = #6-32 stud, .218" (5.54mm) locating tab. 2 = with test button. 3 = #6-32 tapped core, .125" (3.18mm) locating tab. 3 = with indicator lamp.* 4 = #6-32 tapped core, .218" (5.54mm) locating tab. 4 = with test button & indicator lamp.* 5 = BRACKET MOUNT CASE. A = PLAIN CASE, #6-32 stud, locating tab. E = PLAIN CASE, tapped core, locating tab. T = TOP FLANGE CASE. * Indicator lamps are available on models with the following coils: 6-24VAC and DC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: Type 1 & 2 Pole Models 3 Pole Models 4 Pole Models Codes 1, 5, 7, K 1, 5, 7 1**, 5**,7, 9 **4 pole KUP with .187" (4.75mm) quick connect/solder Available terminals will not plug into sockets. Must use .110" (2.79 mm) quick connect solder terminals for socket mounting. 1 = .187" (4.75mm) quick-connect/solder; silver, 5 amps. 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide, 10 amps. 7 = .047” (1.19mm) printed circuit; silver-cadmium oxide, 10 amps. 9 = 4 pole KU, KUP: .110" (2.79mm) quick connect/solder; silver-cadmium oxide, 10 amps. K = .250" (6.35mm) quick connect; silver-cadmium oxide, 10 amps. 5A. Gold Flashed Contact Option: F = Optional gold flashing for silver and silver-cadmium oxide contacts. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock KUP-5A15-24 KUP-11A15-12 KUP-11D15-5 KUP-11D55-110 KUP-14A55-24 KUP-14D25-24 KUP-5A15-120 KUP-11A15-24 KUP-11D15-12 KUP-14A11-120 KUP-14A55-120 KUP-14D35-24 KUP-5A15-240 KUP-11A15-120 KUP-11D15-24 KUP-14A15-12 KUP-14A55-240 KUP-14D55-12 KUP-5A55-120 KUP-11A15-240 KUP-11D15-110 KUP-14A15-24 KUP-14D11-24 KUP-14D55-24 KUP-5D15-12 KUP-11A35-120 KUP-11D35-24 KUP-14A15-120 KUP-14D15-6 KUP-17A19-120 KUP-5D15-24 KUP-11A55-24 KUP-11D55-6 KUP-14A15-240 KUP-14D15-12 KUP-17A55-24 KUP-5D55-12 KUP-11A55-120 KUP-11D55-12 KUP-14A25-120 KUP-14D15-24 KUP-17D19-24 KUP-5D55-24 KUP-11AT5-120 KUP-11D55-24 KUP-14A35-120 KUP-14D15-48 KUP-17D55-24 KUP-11A11-120 KUP-11D11-24 KUP-11D55-48 KUP-14A45-120 KUP-14D15-110 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 724 specified. Refer to inside back cover. Max. Ambient Temp. °C Max. Ambient Temp. °C Catalog 1308242 Issued 3-03 P&B Ordering Information VDE Approved Design Typical Part No. B KUIP -5 A 5 5 -120 1. Basic Series & Type: KUGP KUIP = Enclosed relay designed for General VDE 0435.* KUGP = Enclosed relay with 3mm open contact spacing. (Form A and Form X arrangements only)* 2. Contact Arrangement: 5 = 1 Form C (SPDT)* 11 = 2 Form C (DPDT)* 7 = 2 Form A (DPST-NO) 14 = 3 Form C (3PDT)* 3. Coil Input: A = AC, 50/60 Hz.* D = DC* 4. Mountings: 1 = PLAIN CASE, SOCKET MOUNT.* T = TOP FLANGE CASE.* 5 = BRACKET MOUNT CASE.* 5. Terminal & Contact Material: 3 = .047" (1.19mm) printed circuit board; silver. 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide.* 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.)* See coil data tables. * Options included in VDE file. Our authorized distributors are more likely to stock the following items for immediate delivery. KUIP-14A15-120 KUGP-7D55-24 KUIP-14D15-12 KUIP-5A55-120 KUIP-14D15-24 KUIP-11D55-12 KUIP-11D55-24 Ordering Information High Voltage DC Switching Typical Part No. B KUEP -3 A 1 5 -120 1. Basic Series & Type: KUEP = Enclosed relay with magnetic blow-outs. 2. Contact Arrangement: 3 = 1X (SPST-NO-DM) 7 = 2A (DPST-NO) 11 = 2C (DPDT) 3. Coil Input: A = AC 50/60 Hz. D = DC 4. Mountings: 1 = PLAIN CASE; 3 = with indicator lamp.* *Indicator lamps are available on models with the following coils: 5 = BRACKET MOUNT CASE 6-24VAC and DC, 110VDC and 120-240VAC. Only models with T = TOP FLANGE CASE. 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: 5 = .187" (4.75mm) quick connect/solder; silver- 7 = .047' (1.19mm) printed circuit; silver-cadmium-oxide. cadmium-oxide. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.) Our authorized distributors are more likely to stock the following items for immediate delivery. KUEP-3A15-120 KUEP-3D15-110 KUEP-11D15-12 KUEP-3D15-12 KUEP-7D15-24 KUEP-11D15-24 KUEP-3D15-24 KUEP-11A15-120 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 725 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information 15 Amp Switching Typical Part No. B KUM -14 A 1 8 -120 1. Basic Series & Type: KUMP KUM = 15 amp open relay KUMP = 15 amp enclosed relay 2. Contact Arrangement: 1 = 1A (SPST-NO) 2 = 1B (SPST-NC) 3 = 1X (SPST-NO-DM) 4 = 1Y (SPST-NC-DB) 5 = 1C (SPDT) 6 = 1Z (SPDT-NC-NO [DB-DM]) 7 = 2A (DPST-NO) 8 = 2B (DPST-NC) 11 = 2C (DPDT) 12 = 3A (3PST-NO) 13 = 3B (3PST-NC) 14 = 3C (3PDT) 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Mountings: Type KUM KUMP OPEN STYLE 1 = PLAIN CASE; A = PLAIN CASE, #6-32 STUD LOCATING TAB; 1 = #6-32 stud, .218" 2 = with test button. B = with test button. (5.54mm) locating 3 = with indicator lamp.* C = with indicator lamp.* tab. 4 = with test button & indicator lamp.* D = with test button & indicator lamp.* 2 = 2-hole bracket, 5 = BRACKET MOUNT CASE; E = PLAIN CASE, TAPPED CORE, LOCATING TAB; #6-32 tapped. 6 = with test button. F = with test button. 3 = #6-32 tapped core, 7 = with indicator lamp.* G = with indicator lamp.* .125" (3.18mm) 8 = with test button & indicator lamp.* H = with test button & indicator lamp.* locating tab. 9 = STUD ON END OF PLAIN CASE. T = TOP FLANGE CASE. 4 = #6-32 tapped core, .218" (5.54mm) locating tab. *Indicator lamps are available on models with the following coils: 5 = #6-32 tapped core, 6-24VAC and DC, 110VDC and 120-240VAC. Only models with no locating tab. 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: Type 1 & 2 Pole Models 3 Pole Models Codes 6,8,9,G 6,8,9 Available 6 = .205" (5.21mm) quick connect/solder; silver-cadmium-oxide. 8 = .187" (4.75mm) quick connect/solder; silver-cadmium-oxide. 9 = .047" (1.19mm) printed circuit; silver-cadmium-oxide. G = .250" (6.35mm) quick connect; silver-cadmium-oxide. (Not available on 3 pole models.) 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC (For 277VAC, consult factory.) Our authorized distributors are more likely to stock the following items for immediate delivery. KUMP-11A18-24 KUMP-11D18-12 KUMP-14A18-24 KUMP-14D18-24 KUMP-11A18-120 KUMP-11D18-24 KUMP-14A18-120 KUMP-11A18-240 KUMP-11D18-110 KUMP-14D18-12 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 726 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Open Relays X Is For Terminal Dimensions. Bracket Type See Terminal Drawings. Seated Heights For Open Relays 2.43 MAX.* 1.437 (61.72) .19 1.391" (35.33mm) for #6-32 stud (36.50) 2.33 MAX.** X (4.8) X with .218" (5.54mm) locating tab. (59.18) 2.29 MAX.*** 1.52" (38.6mm) for bracket (58.17) with 2-#6 32 tapped holes. .63 .63 X (16.0) (16.0) 1.282" (32.56mm) for #6-32 tapped core 2.27 MAX.* with .125" (3.18mm) or .218" (5.54mm) locating tab. (57.7) 2.171 MAX.** .16 2.046" (51.97mm) for relay (55.14) (2) #6-32 THREAD (4.1) 2.125 MAX.*** with printed circuit terminals. TAPPED HOLES (53.98) Stud Type 1.468 MAX. 2.27 MAX.* (37.29) STUD TYPE also available with .125" (3.18mm) (57.7) .031 REF. .031 REF. tab, as well as without stud and locating tab. (.79) (.79) 2.171 MAX.** Models without stud have core tapped #6-32 1 2 3 (55.14) THREAD, .25" (6.4mm) minimum depth. 4 5 6 2.125 MAX.*** 1.391 (53.98) 1.282 MAX. 7 8 9 (35.33) (35.56) .218 *Dimensions with .250" (6.35mm) terminals. 1.687 MAX. (5.54) .109 MAX. A B (42.85) **Dimensions with .110" (2.79mm) or (2.77) .205"(5.21mm) terminals. 1.39 MAX.* .31 .065 (7.9) (35.3) ***Dimensions with .187" (4.75mm) terminals. (1.65) .437 1.29 MAX.** .150 (11.10) TAB WIDTH (32.8) #6-32 (3.81) 1.25 MAX.*** THREAD (31.8) Enclosed Relays Plain Case Core and Stud Mount Cases .187 (4.75) DIA. 1.968 MAX.† PUSH-TO-TEST BUTTON .288 X (49.99) AVAILABLE ON KUP, (7.32) 1.906 MAX.‡ & KUMP (48.41) 1.43 MAX. .130 (36.27) 1.531 MAX. .219 MAX. (3.30) 1.74 MAX. (38.89) (5.56) (44.2) 1.968 MAX.† 1 2 3 (49.99) 4 5 6 1.906 MAX.‡ 1.406 MAX. STUD with 7 8 9 (48.41) (35.71) #6-32 THREAD .312 1.39 MAX.* X or CORE TAPPED A B (7.92) (35.3) #6-32 1.29 MAX.** .437 ± .010 (32.8) X (11.10 ± .25) 1.25 MAX.*** X Is For Terminal Dimensions. (31.8) X See Teminal Drawings. X †Dimensions with .250" (6.35mm) terminals. Top Flange Case ‡Dimensions with .110" (2.79mm), .187" (4.75mm and .205" 5.21mm) terminals. .078 TYP. 1.518 MAX. (1.98) (38.56) *Dimensions with .250" (6.35mm) terminals. **Dimensions with .110" (2.79mm) or 1 2 3 .205" (5.21mm) terminals 1.713 ± .003 4 5 6 (43.51 ± .08) ***Dimensions with .187" (4.75mm) terminals. 1.373 ± .010 7 8 9 1.989 ± .003 (34.87 ± .25) (50.52) A B Stud on End Case 1.968 MAX. 2.248 MAX. (49.99) (57.10) .178 TYP. .38 1.906 MAX. (4.52) (9.7) (48.41) .085 MAX. Bracket Mount Case (2.16) .312 .078 R. TYP. PUSH-TO-TEST BUTTON 2.90 MAX. .625 TYP. TYP. (73.7) (1.98) AVAILABLE ON KUP (15.88) (7.92) X & KUMP .75 (19.1) 1.531 MAX. #6-32 THREAD (38.89) .06 .16 (1.52) (4.1) X .375 X 1.968 MAX.† .437 (9.53) (49.99) .07 2.500 (11.10) 1.906 MAX.‡ (1.8) (63.50) (48.41) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 727 specified. Refer to inside back cover. 1.406 MAX. (35.71) 1.128 (28.65) ➛ ➛ Catalog 1308242 Issued 3-03 P&B Outline Dimensions (Continued) Relay Front Diagrams Relays With 1-3 Pole Relays .250" (6.35mm) Terminals 4 Pole Relays 1.531 MAX. 1.531 MAX. 1.531 MAX. (38.89) (38.89) (38.89) 1 2 3 4 1 2 3 1 2 3 1 2 3 4 5 6 7 8 4 5 6 4 5 6 1.406 MAX. 1.406 MAX. 1.406 MAX. 9 10 1 1 12 7 9 (35.71) 7 8 9 (35.71) (35.71) A B A B A B Terminal Dimensions .110" (2.79mm) .205" (5.21mm) .250" (6.35mm) Quick ConnectQuick Connect Quick Connect .035 .093 .156 .109 (.89) (2.36) (2.77) .034 (3.96) .070 DIA. (.86) (1.78) .250 ± .003 HEADER .205 ± .002 HEADER (6.35 ± .08) .035 .110 (5.21 ± .05) HEADER (.89) (2.79) .280 .035 (7.11) .311 REF. .134 .285 (.89) (7.90) (3.40) (7.24) .032 .305 THICKNESS .316 REF. (.81) .312 (7.75) (8.03) (7.92) .358 REF. .032 THICKNESS (9.09) (.81) THICKNESS .032 (0.81) Printed .187” (4.75mm) Circuit Quick Connect .093 .156 ➛ .125 (2.36) (3.96) (3.18) .180 ➛ .187 ± .002 Note: All drawings shown oversize. HEADER HEADER (4.57) (4.75 ± .05) ➛ .250 .078 .237 .156 (6.02) (6.35) (1.98) (3.96) .047 ➛ .268 REF. .281 REF. (1.19) (6.81) (7.14) .032 .020 THICKNESS THICKNESS (.81) (.51) Wiring Diagrams *1 Form X 1 Form C *2 Form A *2 Form C 3 Form C 4 Form C 2 4 1 3 1 3 1 3 2 2 – – 4 6 5 6 7 8 5 4 6 4 6 4 5 6 + + – – – + 7 7 9 7 9 7 8 9 9 10 11 12 – – + + B A A B A B A B A B A B *Recommended Load Polarity for Optimum Arc Suppression. PC Board Layouts (Bottom Views) 1 Form X 3 Pole Models 4 Pole Models .076 DIA. TYP. .206 .076 DIA. TYP. .076 DIA. TYP. .206 (1.93) (5.23) (1.93) (1.93) (5.23) .626 .328 .328 (15.90) (8.33) .626 (8.33) .626 (15.90) (15.90) .875 .170 (22.23) (4.32) .437 .340 (11.10) (8.64) .510 .875 (12.95) (22.23) 1.020 (25.91) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 728 specified. Refer to inside back cover. ➛ ➛ ➛ ➛ ➛ Catalog 1308242 Issued 3-03 P&B Sockets For KU Series Relays Through 3 Poles Socket Selection Table Stock items are boldfaced. For KUP, KUEP, KUGP, KUIP, and KUMP relays, through 3 poles, with .187" (4.75mm) quick connect termination. Socket Socket Termination Hold-Down Spring 27E043 Solder eyelet 20C228 or 20C254* 27E046 PC board, .144" (3.66mm) terminals 20C228 or 20C254 27E067 .187" (4.75mm) quick connect 20C228 or 20C254 27E121 Screw terminals 20C314 (2 per socket required) 27E305 PC board, .184" (4.67mm) terminals 20C228 or 20C254 27E396 .187" (4.75mm) quick connect* 20C254 27E893 Screw terminals† 20C318 * 20C228 held in place by socket hold-down screw where as 20C254 snaps onto socket. ** Snap-in mounting. † DIN rail mounting. Hard Mount Sockets For Relays Through 3 Poles 27E067 27E043 .50 TYP. Nylon sockets with .187" (4.75mm) quick .165 DIA. (12.7) connect, solder or printed circuit terminals (4.19) are available for KUEP, KUGP, KUIP, KUMP, 2 HOLES and KUP relays, through 3 poles, with .187" 1.250 1.250 (4.75mm) quick connect terminals. (31.75) (31.75) 1.370 2.03 All are rated 15 amps and UL recognized, File (34.80) (51.56) E59244 and CSA certified File LR15734 27E043–with solder eyelet terminals. 27E067–with .187" (4.75mm) quick connect .125 .125 (3.18) (3.18) terminals. .875 ± .010 .297 .297 .250 .250 (22.23 ± .25) (7.54) (7.54) 1.50 (6.35) (6.35) (38.1) .34 MAX. .34 MAX. (8.64) (8.64) The 27E043 and 27E067 use chassis cutout shown on this page. 1.375 (34.93) 27E046, 27E305 Suggested Socket 27E396 Socket With Printed Circuit Terminals PC Board Layout Snap-In Socket For Relays Through 3 Poles Nylon snap-in socket with .187" (4.75mm) quick .50 TYP . .875 2 HOLES .437 connect terminals is available for KUEP, KUGP, KUIP, (12.7) (22.23) .165 DIA. .076 DIA. (11.10) KUMP, and KUP relays, through 3 poles, with .187" (4.19) (1.93) .218 (4.75mm) quick connect terminals. Snap-in sockets (5.54) reduce labor by eliminating time consuming screw or 1.687 rivet mounting. Preassembled wiring harnesses may 1.370 2.03 (42.85) .626 also be used as the sockets are designed to snap into (34.80) (51.56) (15.90) 1.076 the chassis from either front or back. All are rated 15 (27.33) .090 TYP. amps and UL recognized, File E59244. The 27E396 (2.29) uses chassis cutout shown on this page. .328 .125 .875 ± .010 .180 TYP. .156 TYP. 27E396–with .187" (4.75mm) quick connect terminals. (8.33) (3.18) (4.57) (22.23 ± .25) .297 (3.96) 1.50 (7.54) (38.1) .023 (.58) 27E046 HAS TERMINALS .144" (3.66 mm) LONG. 27E305 HAS TERMINALS .184" (4.67 mm) LONG. .396 (10.06) Recommended Chassis Cutout Recommeded Chassis Cutout For Hard Mount Sockets For Snap-In Sockets 1.260 (32.00) 1.395 (35.43) .020 .875 (.51) .065 TYP . (22.23) 1.270 .239 (1.65) 1.375 (32.26) (6.07) .281 (34.93) 1.687 (7.14) (42.85) 1.270 .110 (32.26) (2.79) 1.395 4 PLACES (35.43) Recommended chassis thickness .156 DIA. (3.96) .031" (.79mm) to .062" (1.57mm). .208 2 HOLES .260 (5.28) (6.60) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 729 specified. Refer to inside back cover. 1.687 ± .010 (42.85 ± .25) 1.687 ± .010 (42.85 ± .25) Catalog 1308242 Issued 3-03 P&B Sockets For KU Series Relays Through 3 Poles (continued) 27E121 27E893 Screw Terminal Socket Screw Terminal, Din Rail Snap-Mount Socket (use with mounting track 24A110) The 27E121 socket offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187" (4.75mm) The 27E893 DIN rail, snap-mount socket offers screw termination quick connect terminals. This socket stacks on 1.700" (43.18mm) centers. for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with When surface mounting, two #6-32 screws of suitable length are required. .187" (4.75mm) quick connect terminals. This socket is constructed with a When track mounting, two 24A071 retainer clips (not shown) are required. spring-loaded latch which allows it to be quickly snapped onto or removed The 27E121 is rated 15 amps and is UL recognized, File E59244, CSA from a “top hat” style mounting track. No special tools or extra hardware certified, File LR15734. is required for installation. The 27E893 is UL rated 15 amps, 94V-0, File E59244 and CSA rated 10 amps, File LR15734. Terminal Location .895 MAX. Top View 1.550 (22.73) 1.700 ± .010 (39.37) .540 (43.18 ± .25) 6 5 4 (13.72) Terminal .850 ± .010 Location 3 2 1 (21.59 ± .25) .315 MIN. Top View 1.500 (8.00) (38.10) 6 5 4 3.000 3 2 1 (76.20) 1.500 .156 TYP. (38.10) (3.96) .156 TYP . (3.96) B A 9 8 7 3.150 MAX. .317 TYP . (80.01) (8.04) B A 1.030 1.703 (26.16) (43.26) 9 8 7 .390 1.450 MAX. (9.91) (36.83) 1.900 MAX. #6-32 SCREWS & (48.26) CAPTIVE WASHERS Sockets For KU Series 4 Pole Relays Socket Selection Table Stock items are boldfaced. For 4 pole KUP relays with .110" (2.79mm) quick connect termination. Socket Socket Termianation Hold-Down Spring 27E415 .187" (4.75mm) quick connect 20C228 or 20C254 27E419 PC board 20C228 or 20C254 27E867* Screw terminals 20C254 * Use 40G432 insulator pad or customer supplied alternative. Hard Mount Sockets For 4 Pole Relays Suggested Socket Screw Terminal Socket For 4 Pole Relays PC Board Layout 27E415–with .187" (4.75mm) quick connect/solder terminals. 27E867 offers screw termination for 4 pole KUP relays 27E419–with printed circuit terminals. See PC board with .110" (2.79mm) quick connect/socket mount .076 DIA. TYP. .206 layout at right. terminals. Rated 10 amps and is UL recognized, File (1.93) (5.23) E59244. Note: Only 4 pole KUP relays with .110" (2.79mm) quick connect terminals can be used with 4 pole hard mount sockets. .156 DIA. .250 ± .010 #6-32 SCREWS .50 TYP. .328 (3.96) (6.35 ± .254) .150 MAX. (12.7) (8.33) (2) MTNG. HOLES .626 .165 ± .005 (3.81) .060 TYP. (15.90) (4.19 ± .13) 5 + 9 (1.52) 2 HOLES 1 A .170 ++ + + 2 10 (4.32) 1.687 .340 ++ + 6 7 1.370 (42.85) 1.250 (8.64) 2.03 3 ++ + 11 (31.75) (34.80) .510 (51.6) 4 B ++ + + (12.95) 8 12 .062 REF. 1.020 + (1.57) (25.91) 1.750 ± .010 .125 .875 .230 ± .030 (44.45 ± .254) (3.18) (22.23) (5.84 ± .762) .770 MAX. 3.50 ± .030 .297 27E415 uses same chassis cutout as 1.50 (19.56) (88.9 ± .762) (7.54) .250 27E043. (38.1) (6.35) .32 MAX. (8.1) .461 MAX. W/QC TERMINALS (11.71) W/PC TERMINALS Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 730 specified. Refer to inside back cover. 2.250 ± .010 (57.15 ± .254) 2.750 ± .015 (69.96 ± .381)