® ® ® Intel Pentium 4 or Celeron (D) processor based PICMG 1.2 (ePCI-X) SHB with DDR SDRAM, ROBO-8716VG2A VGA, Dual Gigabit Ethernet, Audio and USB 2.0 FEATURES GENERAL ® ® ® ® ® - CPU & Package: Intel Pentium 4/Celeron (D) or Mobile Intel Pentium CPU n PICMG 1.2 SHB supports one PCI and 4-M processor in the mPGA478 package one PCI-X (66MHz only); independent - FSB: 800*/533/400MHz architecture of these two buses increase ® Intel 845GV and 6300ESB Chipset total bandwidth of expansion Up to 2GB DDR 400*/333/266 SDRAM on two 184-pin DIMM sockets Memory n High quality and reliable design for wider ® ® ® Award BIOS BIOS range Intel Pentium 4/Celeron (D) (0.13 micron & 90 nm process) processor - Intel GMCH integrated graphics controller Display ® - Dynamic 8 ~ 64MB shared display memory (Intel DVMT) support mission critical operation - Display resolution up to 2048x1536 @ 60Hz refresh ® ® n Support Mobile Intel Pentium 4-M - Superior 2D, 3D and video performance processor for low power consumption - 10BASE-T/100BASE-TX/1000BASE-T Ethernet Ethernet application - IEEE 802.3u auto-negotiation - Dual RJ-45 connectors with two LED indicators n Dual on-board Gigabit Ethernet for network AC’97 2.2 Audio Audio redundancy application N/A SCSI n Dual SATA port supports higher throughput - Support one PCI bus and one PCI-X bus (66MHz only) Expansion Interface storage deices N/A ISA Bus n Standard features for embedded system Support four EIDE devices with Ultra DMA 100/66/33 EIDE deployment like H/W monitoring, WDT, SSD and Wake-On-LAN - One Type II CF socket Solid State Disk - On Secondary EIDE channel - Bootable for no drives on primary channel - Four serial (RS-232x3, selectable RS-232/422/485x1) & one IrDA 1.0 I/O - Four USB 2.0 ports (Two ports on bracket for keyboard & Mouse) - Dual SATA port - 8 high driving GPIO (4 GPI, 4 GPO) ORDERING GUIDE - Modem-Ring-On and Wake-On-LAN ACPI Function System monitor (fan, temperature, voltage) ROBO-8716VG2A Hardware Monitoring Standard ® ® ® Intel Pentium 4 or Celeron (D) processor Programmable via software from 0.5 sec. to 254.5 min. Watchdog Timer based PICMG 1.2 (ePCI-X) SHB with DDR Typical: +5V@2.2A; +12V(CPU)@6.5A; +12V (system)@0.1A; +3.3@0.4V SDRAM, VGA, dual Gigabit Ethernet, audio Power Requirement and USB 2.0 Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W) Mechanical Optional PCB: 8-layer PA-M1AU Multimedia kit for P4 SBC with audio and o Operating Temperature: 0 to55 C Environment USB ports o Storage Temperature: -20 to 80 C Relative Humidity: 5% to 90%, non-condensing PS/2 Keyboard/Mouse Cable with Bracket CE, FCC Class A Approval PS/2 keyboard / mouse connectors on bracket “ “ Represents to be “over-clocking“ * 09 SBC-ROBO-8716VG2A