PORTWELL ROBO-6730VLA
Specifications
ACPI Function
ATX function with 4-pin header connect to backplane; Modem-Ring-On and Wake-On-LAN
Approval
CE, FCC Class B
Audio
AC' 97 2.2 audio
BIOS
Award BIOS
Bus Architecture
PCI
CPU
Intel ULV Celeron M 600MHz processor (ROBO-6730VLA)400MHz FSB
Dimension
Dimension: 185(L)x122(W)mm; 7.3"(L)x4.8"(W)
EIDE
Support dual EIDE channel with Ultra DMA 100/66/33; One 44-pin and one 40-pin connector
Ethernet
10BASE-T/100BASE-TX Ethernet; IEE 802.3u auto-negotiation support; One RJ-45 connnector on bracket
Floppy Disk Drive
up to two floppy disk drives
Graphics Controller
Intel 852GM mobile optimized graphic controller; Dynamical allocates 32/64MB system memory for display
Hardware Monitoring
System Monitor (fan, temperature, voltage)
IrDA
one IrDA
MIO
On-board Winbond W83627HF super I/O' Two serial(one on bracket; one RS-232/422/485 selectable, one parallel
Operating Humidity
5%to 95%, non-condensing
Operating Temperature
0 to 55C
Parallel Port
One
PCB
8-Layer
Power Requirement
+5V@2.0A; +12V@1.5A
Processor
Intel Pentium M
Resolutions
Support VGA (DB15 on bracket) and LVDS interface
SBC Size
Half-Size
Serial Ports
Two serial (one on bracket; one RS-232/422/485 selectable)
SSD
One Type II CF socket; On secondary EIDE channel; Bootable for no drives primary channel
Storage Temperature
-20 to 75C
System Chipset
Intel 852GM and ICH4
System Memory
Up to 1GB DDR 200/266/333 SDRAM on one 200-pin SODIMM socket
TV-out
Support TV output by project based
USB
Four USB ports
Watchdog Timer
Programmable via software from 0.5 sec. to 254.5 min.
Features
- Audio - Auto Codec '97 (AC'97) 2.2 for a high quality audio architecture
- CPU - Fanless solution with on-board Intel® ULV Celeron® M 600MHz processor (ROBO-6730VLA)
- EXPANSION - One Type II Compact Flash at the rear that supports up to 1 GB flash disk for installation OS without hard drive PCI bus interface for higher flexibility and expandability
- LAN - On-board IntelR 10 BASE-T/100BASE-TX Fast Ethernet
- Memory - One SODIMM socket at the rear that supports up to 1 GB system memory
- VGA - Support dual display function via VGA and LVDS output Perfect engine of slim computer with LVDS Interface LCD panel
Datasheet
Extracted Text
® ® Intel ULV Celeron M processor based Half-sized PCI SBC with VGA, LCD, LAN and Audio ROBO-6730VLA FEATURES GENERAL ® ® CPU & Package: Intel ULV Celeron M 600MHz processor (ROBO-6730VLA) CPU ® � Fanless solution with on-board Intel ULV FSB: 400MHz ® Celeron M 600MHz processor (ROBO-6730VLA) ® Intel 852GM and ICH4 Chipset � Support dual display function via VGA and Up to 1GB DDR 200/266/333 SDRAM on one 200-pin SODIMM socket Memory LVDS output Award BIOS BIOS � Perfect engine of slim computer with LVDS ® - Intel 852GM mobile optimized graphics controller Display interface LCD panel - Dynamical allocates 32/64MB system memory for display - Support VGA (DB15 on bracket) and LVDS interface ® � On-board Intel 10 BASE-T/100BASE-TX - Support TV output by project based Fast Ethernet - 10 BASE-T/100BASE-TX Ethernet Ethernet - IEEE 802.3u auto-negotiation support � One SODIMM socket at the rear that supports - One RJ-45 connector on bracket up to 1GB system memory AC ’97 2.2 audio Audio � One Type II Compact Flash at the rear that supports N/A SCSI up to 1GB flash disk for installation OS without N/A Expansion Interface hard drive N/A ISA Bus � Audio Codec ’97 (AC’97) 2.2 for a high quality - Support dual EIDE channel with Ultra DMA 100/66/33 EIDE audio architecture - One 44-pin and one 40-pin connector � PCI bus interface for higher flexibility - One Type II CF socket Solid State Disk and expandability - On secondary EIDE channel - Bootable for no drives primary channel - On-board Winbond W83627HF super I/O I/O - Up to two floppy disk drives - Two serial (one on bracket; one RS-232/422/485 selectable), one parallel, one IrDA and four USB ports - ATX function with 4-pin header connect to backplane ACPI Function - Modem-Ring-On and Wake-On-LAN System monitor (fan, temperature, voltage) Hardware Monitoring - Programmable via software from 0.5 sec. to 254.5 min. Watchdog Timer Typical: +5V@2.0A; +12V@1.5A Power Requirement ORDERING GUIDE Dimension: 185(L) x 122(W) mm; 7.3"(L) x 4.8" (W) Mechanical ROBO-6730VLA PCB: 8-layer Standard ® ® Intel ULV Celeron M processor based Half-sized PCI o Operating Temperature: 0 to 55 C Environment SBC with VGA, LCD, LAN and Audio o Storage Temperature: -20 to 75 C Relative Humidity: 5% to 95%, non-condensing Optional PA-M1AU CE, FCC Class B Multimedia kit with audio and USB ports on bracket Approval Headquarters American Portwell Portwell Japan, Inc. Beijing Portwell (UK) Portwell, Inc. 6851 Mowry Avenue ¢E101-0042 Ueda Build. 7F,10-2 6F, Building 3, Qunying Zone, Unit 30, Basepoint Enterprise Centre 3F, No. 92, Sec. 1, Nei-Hu Rd., 114 Taipei, Taiwan Newark, CA 94560, USA Kanda higashi matsushita-cho Chuangye Rd. 8, Shangdi,Haidian Stroudley Road, Basingstoke, Tel: +1-510-790-9192 chiyoda-ku Tokyo Japan Hampshire, RG24 8UP UK Tel: +886-2-27992020 District, Beijing, China 100085 Fax: +1-510-790-9191 Tel: +81-3-5298-8071 Tel: +86-10-82701616 Tel: +44-1256-406688 Fax: +886-2-27991010 E-mail: info@mail.portwell.com.tw E-mail: info@mail.portwell.com Fax: +81-3-5298-8072 Fax: +86-10-82700606 Fax: +44-1256-406689 http: //www.portwell.com E-mail: info@portwell.co.jp E-mail: info@emca.co.uk http: //www.portwell.com.tw E-mail: info@mail.portwell.com.tw http: //www.portwell.co.jp http: //www.portwell.com.cn http: //www.emca.co.uk M050225
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the ROBO-6730VLA have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods