A Universe of Connectivity P32xi t’s incredible! Only the very best devices provide the flexibility and versatility necessary Ito keep up with the incredible pace of today’s technological change. That’s why Pleiades Communications devolped the P32xi intelligent voice and data multiplexer. At only 4 lbs and measuring 7.7” x 13” X 1.75”, the P32xi is the smallest channel bank on the market today. But don’t let size fool you, the P32xi can simultaneously handle local and long distance voice and high speed data, Internet, point-to-point T1 and frame relay services. The P32xi comes comes complete with 32 channels; 24 FXS voice channels and eight expansion channels with one T1 network interface and a V.35 Data Port or an optional SNMP managed WAN Data Router/Bridge. And the P32xi is prepared for emergencies. In the event of a power failure, the unit has up to eight hours of back-up battery power to ensure mission critical operations, without interruption. The unique wall-mounted BC-48 battery case is only 3.4” deep and 9.5” wide and 13.5” tall TM All settings can be adjusted on site or remotely with the StarCAD 9000 graphical user interface (GUI). Plus, expansion boards allow the device to grow as the network grows. As technology changes, so does the P32xi. Pleiades Communications designed the P32xi to provide all network services within a single unit. It’s the ideal integrated access device for CLECs and IXCs rolling out digitial services to their end-user’s locations. It’s also the right choice for small to medium- sized businesses looking to replace their existing edge devices or upgrading a satellite offices by adding a T1 connection. The P32xi incorporates next-generation capabilities by offering leading-edge technnology, scalability and unmatched reliability, ensuring communications efficiency and functionality well into the future. PLEIADES COMMUNICATIONS Technical Specifications P32xi Features Specifications and Functionality PRIMARY T1 INTERFACE • 24 analog FXS channels Line Rate 1.544 Mbps Framing SF (D4), ESF or TR08 (software selectable)Can simultaneously handle local Line Code AMI or B8ZS (software selectable) and long distance voice & data, Clock Sources Loop timing or internal clock Internet, point-to-point T1 and Output Signal CSU or DSX1 frame relay services Line Build Out (LBO) 0, -7.5, -15 or -22.5 dB (software selectable) Mechanical 8-pin Modular RJ-45 jack and dual bantam jack for Tx & Rx monitoring • V.35 interface on a high density Signaling Conversions All T1 signaling conversions supported DB-26 connector DATA PORT Number of Ports One per system (cannot be used when the Data Router option is • Integrated CSU with T1 Signal- installed) ing and Line Code Conversion ROUTER MODULE (OPTIONAL) (Disengages the V.35 port when installed) • Optional SNMP managed WAN LAN Interface Ethernet 10Base-T (RJ-45) Data Router/Bridge for frame Routing Protocols IP, IPX, and bridging Security IP Filtering relay and Internet services Management SNMP MIB II, Net Grip PC GUI interface • Triple Mode Power: Power the WAN Protocols HDLC, PPP, Frame Relay (RFC 1490) P32xi from 110 VAC or ANALOG 48VDC, or 110VAC with FXS Signals FXS Loop or Ground Start 48VDC back-up. The P32xi Transmit Gain +1 to -8 dBm, user selectable Receive Gain +1 to -8 dBm, user selectable power supply contains an Impedence 600Ω or 900Ω (software selectable) integrated battery charge circuit for use with the BC-48A battery PERFORMANCE MONITORING Channels T1 Channels via FDL (AT&T 54016, ANSI T1.403) or GUI Interface cabinet. Reports Last 24 Hours in 15 minute increments; ES, SES, BES, UAS. LOFC, • Battery back-up provides up to 8 Errored Events hours of service ALARMS Call for Help Auto dial out via external modem at present thresholds • T1 Voice can connect to Loop or LEDS; Contacts: One set of dry contacts of pair 25 Ground Start PBXs, KSUs or telephones POWER AC Input: 110 VAC, 0.8A or DC Input: -48 VDC, 1.5A or AC and DC Input : 110 VAC and -48 VDC. Switches to DC power upon • Forward Disconnect function for AC power failure Ringer: 15 REN low distortion sine wave integrated into the P32xi loop start calls eliminates hung trunks BATTERY BACK-UP POWER -48 VDC battery charger integrated into power supply circuitry Integrated float, equalize and auto battery test functions • E&M Immediate and E&M Wink Life: Up to 8 hours @ 18 CCS with BAT-HE12V7.7 batteries to Loop or Ground Start PHYSICAL P32xi: 13” wide x 1.75” deep x 1.75” tall (1 RU); 4 lbs. • Supports Carrier Services such BC-48A 9.3” wide x 3.4” deep x 13.5” tall; 7.5 lbs (31 lbs with ® as AT&T Megacom batteries COMPLIANCE FCC Part 68, FCC Part 15 Class A, NRTL; Safety Listed UL 1950, AT&T Management TR 54016, 62411 & 43801 • Entire unit can be remotely TM Sales & Marketing configured with StarCAD 9000 2830 Market Loop #104 GUI Southlake, TX 76092 • SNMP MIB II 817.251.1180 www.pleiadescom.com e-mail: sales@pleiadescom.com PCI 0900-02