431312120043 - PHYCOMP

Description

Phycomp 431312120043 433Mhz Antenna

Part Number

431312120043

Price

Request Quote

Manufacturer

PHYCOMP

Lead Time

Request Quote

Category

PRODUCTS - 4

Specifications

Azimuth

Omni-directional

Bandwidth

20 MHz (Min)

Frequency Range

421 ~ 445 MHz

Gain

0.5 dBi (Max)

Impedance

50?

Operating Temperature

-55~125 oC

Polarization

Linear

Resistance to soldering heat

260°C, 10 sec

Termination

Ni/Sn (Environmentally-Friendly Leadless)

VSWR

2.0 max

Working Frequency

433 MHz

Features

20Mhz Bandwidth
433 Mhz Frequency
Bandwidth Gain 0.5Hz
RoHs Compliant
Surface Mount

Datasheet

431312120043-224270627.pdf

516 KiB

Download

Extracted Text

MULTILAYER CERAMIC ANTENNA (LINEAR POLARIZATION MODE) FOR 400MHz~500MHz 1 Product Specification (Preliminary) QUICK REFERENCE DATA __________________________________________________________________________ Working Frequency* 400~500MHz Bandwidth 20 MHz (Min) Gain 0.5 dBi (Max) VSWR 3.0 max Polarization Linear Azimuth Omni-directional Impedance 50Ω o Operating Temperature -55~125 C Termination Ni/Sn (Environmentally-Friendly Leadless) o Resistance to soldering heat 260 C, 10 sec. * Three types of ceramic antenna are available: Type 43, Type 46, and Type 49 Special Environmental Concerns- Green Products Design: The foil making process is using environmentally friendly aqueous solvent technology. Termination is lead free and packing materials can be re-cycled 1. APPLICATION 1 All the technical data and information contained herein are subject to change without prior notice Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-1 A4 Page 1 spec.doc PHYCOMP Ltd. 60 mm cleanness BACK SIDE circuits space back side all ground plane (But under antenna should avoid ground plane) TOP SIDE RF-Module 40 mm 50 ohm transmission line 2. SOLDER LAND PATTERN FOR ANTENNA Figure Remark Dimensions L 7.30 ± 0.50 mm S S S C F Feed pad 2.50 ± 0.50 mm C 0.90 ± 0.10 mm L S Mount pad 2.50 ± 0.50 mm S F S Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-2 A4 Page 2 spec.doc PHYCOMP Ltd. 3. MECHANICAL DATA Figure Dimension Port W L 6.8±0.5mm - W - 37.5±0.5mm T - 0.90±0.2mm F Feed termination C 2.3±0.3mm S C Solder termination T 0.5±0.3mm S1 S1 S Solder termination 2.3±0.3mm S1 Solder termination 1.4±0.3mm L F S1 S1 4. TEST BOARD DIMENSION FOR S11 (RETURN LOSS) AND RADIATION PATTERN MEASURNMENT 60 mm 40 mm 50 ohm transmission line FR-4 PCB thickness = 0.8 mm The length of transmission line = 1.35 mm ( depends on PCB thickness) Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-3 A4 Page 3 spec.doc PHYCOMP Ltd. 5. S11 RETURN LOSS (Adjustable, Example is 433MHz, 4311 121 20043) (Adjustable, Example is 490MHz, 4311 121 20049) Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-4 A4 Page 4 spec.doc PHYCOMP Ltd. 6. TYPICAL RADIATION PATTERN 0 0 45 -45 45 -45 90 -90 90 -90 135 225 135 225 E Plane H Plane 180 180 Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-5 A4 Page 5 spec.doc PHYCOMP Ltd. RELIABILITY DATA (Reference to IEC Specification) IEC IEC 384-10/ 6006868-2 TEST PROCEDURE REQUIREMENTS CECC 32 TEST 100 METHOD CLAUSE 4.4 Mounting The antenna can be No visible damage mounted on printed- circuit boards or ceramic substrates by applying wave soldering, reflow soldering (including vapour phase soldering) or conductive adhesive 4.5 Visual inspection Any applicable method In accordance with and dimension specification (no chip using × 10 check off 3 mm) magnification 4.6.1 Antenna Central Frequency Standard test board o in page 3 at 20 C 4.8 Adhesion A force of 5 N applied No visible damage for 10 s to the line joining the terminations and in a plane parallel to the substrate 4.9 Bond strength of Mounted in accordance No visible damage plating on end face with CECC 32 100, paragraph 4.4 Conditions: bending No visible damage 0.25 mm at a rate of 1mm/s, radius jig. 340 mm, 1 mm warp on FR4 board of 90 mm length 4.10 Tb Resistance to The terminations 260 ± 5 °C for 10 ± 0.5 s soldering heat shall be well tinned in a static solder bath after recovery and Central Freq. Change ± 6% Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-6 A4 Page 6 spec.doc PHYCOMP Ltd. IEC IEC 384-10/ 6006868-2 TEST PROCEDURE REQUIREMENTS CECC 32 TEST 100 METHOD CLAUSE Resistance to 260 ± 5 °C for 30 ± 1 s Using visual leaching in a static solder bath enlargement of × 10, dissolution of the termination shall not exceed 10% 4.11 Ta Solderability Zero hour test, and test The termination must after storage (20 to 24 be well tinned, at months) in original least 75% is well atmosphere; un-mounted tinned at termination chips completely immersed for 2 ± 0.5 s in 235 ± 5°C. 4.12 Na Rapid change of No visible damage -55 °C (30 minutes) to temperature Central Freq. Change +125 °C (30 minutes); 5 ± 6% cycles 4.14 Ca Damp heat 500 ± 12 hours at 60 °C; No visible damage 90 to 95 % RH 2 hours recovery Central Freq. Change ± 6% 4.15 Endurance 500 ± 12 hours at 125 No visible damage 2 hours recovery °C; Central Freq. Change ± 6% Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-7 A4 Page 7 spec.doc PHYCOMP Ltd. ORDERING INFORMATION: 12NC Ordering Code The antennas may be ordered by using the Yageo ordering code. These code numbers can be determined by the following rules: CAN 43 13 1 21 20 043 1B CAN = Yageo Part No. for Antenna F. Family Code 43 = Antenna C. Packing Type Code 13 = Bulk, 1000 pcs M. Materials Code 1 = High Frequency Material S. Size Code 21 = 6.5 * 38.0 * 0.9 mm T. Tolerance 20 = 20 MHz Bandwidth, VSWR<3 A. Working Frequency 043 = 433MHz, Type 43 (No Marking) 046 = 460MHz, Type 46 (Marking 6) 049 = 490MHz, Type 49 (Marking 9) Packing Type Code 1B = 1000 pcs for tape Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-8 A4 Page 8 spec.doc PHYCOMP Ltd. Revision Control: Revision Date Content Remark April 20, 2002 New Issued Aug 9, 2002 Add Type 49 and add 6 terminations' dimension VSWR< 3 Oct 14, 2002 Modify dimension and termination width (S1, F, C, T) Print date 04/10/06 R&D Preliminary use only Aug. 9, 02 Oct. 14, 02 Multilayer Ceramic Antenna CAN4313 121 200431B for 433~500MHz CAN4313 121 200461B CAN4313 121 200491B Grant/Cliff Oct. 14, 02 sheet 190-9 A4 Page 9 spec.doc PHYCOMP Ltd.

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products