ORDERING DATA: SERIES 5360 PROXIMITY SWITCHES TO ORDER SPECIFY: Type, Cord Type, Sensing Circuitry, Design No., and Cable Length. CABLE LENGTH 02 -2 meter length cable TYPE (Leave blank when quick Hall, Reed, Magnetoresistive connect is specified) 536 0 2-2 02 - CORD TYPE SENSING 0- Cabled CIRCUITRY DESCRIPTION SWITCH COLOR 2- Quick Connect 2-2 NPN or PNP DC Reed White 3-1 NPN DC Hall Yellow 4-1 PNP DC Hall Red 5-1 NPN DC Solid State Black NOTES: 6-1 PNP DC Solid State Orange 1) Cordsets for quick connect switches 9-2 AC Reed w/Current Limiting Green must be ordered separately. 2) Other cable lengths available. Consult PHD. CORDSETS WITH QUICK CONNECT PART NO. LENGTH 63549-02 2 meter 63549-05 5 meter 9-6 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES BENEFITS: SERIES 5360 HALL EFFECT SWITCHES BENEFITS ■ Series 5360 Hall Effect Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls. ■ Switches have no moving parts or mechanical contacts, providing long switch life and elimination of contact bounce. ■ Constant amplitude output is provided for use with most digital logic systems. ■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator. ■ Several switches may be mounted to control or initiate any sequence or function. ■ Dual LED indicators provide convenient means for positioning and troubleshooting circuits. Green LED shows that power is being received at the switch and amber shows when the switch output is on. SPECIFICATIONS 53603 & 53623 53604 & 53624 ■ Available in a Quick Connect model for easy installation OPERATING PRINCIPLE Hall Effect and maintenance. ACTUATED BY Moving Magnet Series 5360 Hall Effect Switches are designed specifically to INPUT VOLTAGE 4.5 to 24 VDC provide an input signal to various types of programmable controllers OUTPUT TYPE NPN (Sink) PNP (Source) or logic systems. Since Hall Effect Switches are solid-state, there are CURRENT RATING 20 mA. Max. 100 mA. Max. no moving parts to wear out. They offer an infinite number of trouble- VOLTAGE DROP .5 VDC Max. free operations. Hall Effect Switches operate on DC current only. SWITCH BURDEN 12 mA. Max. ENVIRONMENTAL IP67 OPERATING TEMP. 0° to 80°C HALL EFFECT WIRING SCHEMATICS MODEL NO. 53603 & 53623 - NPN (SINK) MODEL NO. 53604 & 53624 - PNP (SOURCE) INPUT - 4.5-24 VDC INPUT - 4.5-24 VDC LOAD CURRENT - 20 mA. MAX. LOAD CURRENT - 100 mA. MAX. SWITCH HOUSING COLOR - YELLOW SWITCH HOUSING COLOR - RED (LED’s have been omitted from the schematic for clarity.) (LED’s have been omitted from the schematic for clarity.) CABLED MODEL 53603 CABLED MODEL 53604 DC DC BROWN BROWN BLACK LOAD BLACK LOAD BLUE BLUE DC DC QUICK CONNECT MODEL 53623 QUICK CONNECT MODEL 53624 BROWN BROWN DC 1 DC 1 PIN 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 2/4 LOAD 2/4 BLACK PIN 3 PIN 3 DC 3 DC 3 BLUE BLUE 9-7 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCH SWITCH SWITCH SWITCH SWITCHES BENEFITS: SERIES 5360 SOLID STATE SWITCHES BENEFITS ■ Series 5360 Solid State Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls. ■ Switches are solid state, having no moving parts or mechanical contacts, providing long switch life and elimination of contact bounce. ■ Transient voltage protection. ■ Constant amplitude output is provided for use with most digital logic systems. ■ Reverse polarity protection. ■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator. ■ Several switches may be mounted to control or initiate any sequence or function. SPECIFICATIONS 53605 & 53625 53606 & 53626 OPERATING PRINCIPLE Solid State ■ Dual LED indicators provide convenient means for positioning and troubleshooting circuits. Green LED shows that power is ACTUATED BY Moving Magnet being received at the switch and amber shows when the switch INPUT VOLTAGE 6 to 24 VDC Max. output is on. OUTPUT TYPE NPN (Sink) PNP (Source) CURRENT RATING 20 mA. Max. 100 mA. Max. ■ Available in a Quick Connect model for easy installation VOLTAGE DROP .5 VDC Max. and maintenance. SWITCH BURDEN 12 mA. Max. ENVIRONMENTAL IP67* Series 5360 Solid State Switches are designed specifically OPERATING TEMP. 0° to 80°C to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble- free operations. Solid State Switches operate on DC current only. SOLID STATE WIRING SCHEMATICS MODEL NO. 53605 & 53625 - NPN (SINK) MODEL NO. 53606 & 53626 - PNP (SOURCE) INPUT - 6-24 VDC INPUT - 6-24 VDC LOAD CURRENT - 20 mA. MAX. LOAD CURRENT - 100 mA. MAX. SWITCH HOUSING COLOR - BLACK SWITCH HOUSING COLOR - ORANGE (LED’s have been omitted from the schematic for clarity.) (LED’s have been omitted from the schematic for clarity.) CABLED MODEL 53605 CABLED MODEL 53606 DC DC BROWN BROWN BLACK LOAD BLACK LOAD BLUE BLUE DC DC QUICK CONNECT MODEL 53625 QUICK CONNECT MODEL 53626 BROWN BROWN DC 1 DC 1 PIN 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 2/4 LOAD 2/4 BLACK PIN 3 PIN 3 DC 3 DC 3 BLUE BLUE 9-8 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES SWITCH SWITCH SWITCH SWITCH DIMENSIONS: SERIES 5360 HALL/SOLID STATE SWITCHES HALL EFFECT AND SOLID STATE SWITCH .320 .150 2 m CABLE x Ø .134 [3.40] [8.1] [3.8] .460 [11.7] .290 .325 .061 [7.4] [8.2] [1.5] .126 .700 [17.8] [3.2] .580 [14.7] HALL EFFECT AND SOLID STATE SWITCH WITH MALE QUICK CONNECT .320 .150 CABLE x Ø .134 [3.40] [8.1] [3.8] [M8x1] .460 [11.7] 4.000 .061 .290 [102.0] [1.5] [7.4] .126 .700 .325 (5.590 [142]) [3.2] [17.8] [8.3] .580 [14.7] 63549-xx CORDSET WITH FEMALE QUICK CONNECT LETTER DIM. A PIN 1 MODEL NO. A PIN 2/4 WIRE COLOR WIRE COLOR 78.74 BROWN BLACK 63549-02 [2 m] 196.85 PIN 3 63549-05 .689 [19.3] CABLE x  .177 [4.5] [5 m] WIRE COLOR 1.299 [34.8] BLUE  .402 [10.2] NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE All dimensions are reference only unless specifically toleranced. 9-9 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES BENEFITS: SERIES 5360 REED SWITCHES BENEFITS ■ Series 5360 Reed Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls. ■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator. ■ Several switches may be mounted to control or initiate any sequence or function. ■ An LED indicator provides convenient means for positioning and troubleshooting circuits. ■ Available in a Quick Connect model for easy installation and maintenance. ■ Special current limit model available for AC applications where 53609-2* inrush might otherwise damage the switch. SPECIFICATIONS 53602-2 & 53622-2 & 53629-2* OPERATING PRINCIPLE Magnetic Reed ACTUATED BY Moving Magnet INPUT VOLTAGE 4.5 to 24 VDC 110 to 120 VAC Series 5360 Reed Switches are available in either AC or OUTPUT TYPE Contact Closure DC models. They are ideal for use as inputs for many types of POWER CAPACITY 4 Watt Max. 2.5 Watt Max. sequencers and programmable controllers. In some cases, they can CURRENT RATING 200 mA. Max. Inter. Limited to 20 mA. be used to drive some relays or valve solenoids. However, electrical CONTACT RESISTANCE .200 Ohms Max. 1.5 kOhm transients (inrush currents or line spikes) associated with inductive ENVIRONMENTAL IEC IP67 or capacitive loads can damage and shorten the life of the switch. OPERATING TEMP. 0° to 80°C * CE certification not applicable to these switch models. DIMENSIONS: SERIES 5360 REED SWITCHES REED SWITCH REED SWITCH WITH MALE QUICK CONNECT .320 .150 CABLE x Ø .134 [3.40] [8.1] [3.8] [M8x1] .460 [11.7] 4.000 .061 .290 [102.0] [7.4] [1.5] .126 .700 .325 (5.590 [142]) [3.2] [17.8] [8.3] .580 [14.7] LETTER DIM. MODEL NO. A B NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS 53602-2& 53622-2 .685 [17.4] 1.090 [27.7] ARE PROVIDED FOR 53609-2 & 53629-2 .895 [22.7] 1.300 [33] CONVENIENCE 63549-xx CORDSET WITH FEMALE QUICK CONNECT LETTER DIM. A PIN 1 MODEL NO. A PIN 2/4 WIRE COLOR WIRE COLOR 78.74 BROWN BLACK 63549-02 [2 m] 196.85 PIN 3 .689 [19.3] CABLE x  .177 [4.5] 63549-05 [5 m] WIRE COLOR 1.299 [34.8] BLUE  .402 [10.2] NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE 9-10 All dimensions are reference only unless specifically toleranced. PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES ENGINEERING DATA: SERIES 5360 REED SWITCHES REED WIRING SCHEMATICS CABLED MODEL 53609-2 MODEL NO. 53609-2 & 53629-2 INPUT - 110-120 VAC BROWN SWITCHED POWER - 2.5 WATT MAX. BLACK LOAD INTERNAL RESISTANCE - 1.5 kOhm BLUE SWITCH HOUSING COLOR - GREEN QUICK CONNECT MODEL 53629-2 BROWN 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 3 3 BLUE SWITCH HOUSING COLOR - WHITE MODEL NO. 53602-2 & 53622-2 - NPN (SINK) OR PNP (SOURCE) (Bi-polar LED emits a green light in the Sinking circuit INPUT - 4.5-24 VDC and a red light in the Sourcing circuit.) POWER CAPACITY - 4 WATT MAX. LOAD CURRENT - 200 mA. MAX. CABLED MODEL 53602-2 - NPN (SINK) CABLED MODEL 53602-2 - PNP (SOURCE) DC DC BLUE BROWN BLACK LOAD BLACK LOAD BLUE BROWN DC DC QUICK CONNECT MODEL 53622-2 - NPN (SINK) QUICK CONNECT MODEL 53622-2 - PNP (SOURCE) BROWN DC 1 PIN 3 BROWN DC 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 2/4 LOAD PIN 1 2/4 BLACK DC 3 BLUE PIN 3 DC 3 BLUE All dimensions are reference only unless specifically toleranced. 9-11 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 LINE LINE SWITCHES ORDERING DATA: SERIES 6250 PROXIMITY SWITCHES TO ORDER SPECIFY: Type, Cord Type, Sensing Circuitry, Design No., and Cable Length. CABLE LENGTH 02 -2 meter length cable TYPE (Leave blank when quick Reed, Magnetoresistive connect is specified) 625 0 7-1 02 - CORD TYPE SENSING 0- Cabled CIRCUITRY DESCRIPTION SWITCH COLOR 1- Quick Connect 5-1 NPN (Sink) DC Solid State Brown 6-1 PNP (Source) DC Solid State Tan 7-1 AC/DC Reed Silver NOTES: 1) Cordsets for quick connect switches must be ordered separately. 2) Other cable lengths available. Consult PHD. CORDSETS WITH QUICK CONNECT PART NO. CABLE LENGTH 61397-02 2 meter/3 wire 61397-05 5 meter/3 wire NOTE: This cordset is used for both 3-wire and 2-wire applications. When used in 2-wire applications, refer to the schematic and disregard the black wire. 9-12 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES BENEFITS: SERIES 6250 REED SWITCHES BENEFITS ■ Series 6250 Reed Switches are available for use with PHD ISO Cylinder and on other select PHD actuators which use the “M” magnet option. ■ Series 6250 Reed Switches offer both 120 VAC or 10 to 30 VDC sink and source operation for maximum flexibility in interfacing with various electronic controls. ■ Special current limiting feature is designed into each switch for protection against potential current inrush damage to switch components. ■ Integral clamp mounting provides easy attachment and adjustment while eliminating the cost of brackets and additional SPECIFICATIONS 62507-1 62517-1 hardware. SWITCH COLOR Silver OPERATING PRINCIPLE Magnetic Reed ■ Several switches may be used on an actuator to control or initiate a sequence or function. ACTUATED BY Moving Magnet INPUT VOLTAGE 10 to 30 VDC or 110-120 VAC* ■ LED indicator provides convenient means for positioning and OUTPUT VOLTAGE Contact Closure troubleshooting circuits. POWER CAPACITY 2.5 Watt Max. CURRENT RATING Internally Limited to 25 mA. ■ Switches include either a hard wired 24 AWG, Polyurethane IMPEDANCE 2.25 k Ohm (PUR) jacketed cable making it virtually impervious to chemical ENVIRONMENTAL IP67 or environmental damage, or an integral 8 mm screw type OPERATING TEMP.0 to 80C connector mounted directly on the switch. * CE certification applicable to 10 to 30 VDC range only. ■ IP67 Environmental Protection REED WIRING SCHEMATICS MODEL NO. 62507-1 & 62517-1 MODEL NO. 62507-1 & 62517-1 INPUT - 110 - 120 VAC INPUT - 10 to 30 VDC POWER CAPACITY - 2.5 WATTS MAX. POWER CAPACITY - 2.5 WATTS MAX. LOAD CURRENT - 25 mA. MAX. LOAD CURRENT - 25 mA. MAX. INTERNAL RESISTANCE - 2.25 k Ohm SWITCH HOUSING COLOR - SILVER SWITCH HOUSING COLOR - SILVER CABLED MODEL 62507-1 CABLED MODEL 62507-1 Alternate load position for Alternate load position for sink circuit DC sink circuit BROWN BROWN LOAD LOAD LOAD LOAD BLUE BLUE DC QUICK CONNECT MODEL 62517-1 QUICK CONNECT MODEL 62517-1 Alternate load position for Alternate load position for DC sink circuit sink circuit PIN 1 PIN 1 1 1 LOAD LOAD 2/4 2/4 LOAD LOAD PIN 3 PIN 3 DC 3 3 9-13 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 LINE LINE SWITCHES BENEFITS: SERIES 6250 SOLID STATE SWITCHES BENEFITS ■ Series 6250 Solid State Switches are available for use with PHD ISO Cylinders and on other select PHD actuators which use the “M” magnet option ■ Available in both current sinking or current sourcing models for maximum flexibility in interfacing with various electronic controls. ■ Series 6250 Solid State Switch circuitry protects against voltage surges and other electrical anomalies associated with operating systems. ■ Integral clamp mounting provides easy attachment and adjustment while eliminating the cost of brackets and additional hardware. ■ Several switches may be mounted to control or initiate any sequence or function. ■ An LED indicator provides convenient means for positioning and troubleshooting circuits. 62505-1 & 62506-1 & SPECIFICATIONS 62515-1 62516-1 ■ Switches include either a hard wired 24 AWG, Polyurethane (PUR) jacketed cable making it virtually impervious to chemical SWITCH COLOR Brown Tan or environmental damage, or an integral 8mm screw type OPERATING PRINCIPLE Magnetoresistive connector mounted directly on the switch. ACTUATED BY Moving Magnet INPUT VOLTAGE 10 to 30 VDC ■ IP67 Environmental Protection OUTPUT TYPE NPN (Sink) PNP (Source) CURRENT RATING 100 mA. Max. 100mA. Max. Series 6250 Solid State Switches are designed specifically VOLTAGE DROP .5 VDC Max. to provide an input signal to various types of programmable SWITCH BURDEN 12 mA. Max. controllers or logic systems. Since Solid State Switches have no ENVIRONMENTAL IP67 moving parts to wear out, they offer an infinite number of trouble- free operations. Solid State Switches operate on DC current only. OPERATING TEMP. 0° to 80°C MAGNETORESISTIVE WIRING SCHEMATICS MODEL NO. 62505-1 & 62515-1 - NPN - (SINK) MODEL NO. 62506-1 & 62516-1 - PNP - (SOURCE) INPUT - 10-30 VDC INPUT - 10-30 VDC LOAD CURRENT - 100 mA. MAX. LOAD CURRENT - 100 mA. MAX. SWITCH HOUSING COLOR - BROWN SWITCH HOUSING COLOR - TAN (LED has been omitted from the schematic for clarity.) (LED has been omitted from the schematic for clarity.) CABLED MODEL 62505-1 CABLED MODEL 62506-1 DC DC BROWN BROWN BLACK LOAD BLACK LOAD BLUE BLUE DC DC QUICK CONNECT MODEL 62515-1 QUICK CONNECT MODEL 62516-1 DC 1 DC 1 PIN 1 PIN 1 2/4 LOAD 2/4 2/4 LOAD 2/4 PIN 3 PIN 3 DC 3 DC 3 9-14 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES MR MR SWITCH SWITCH MR MR SWITCH SWITCH DIMENSIONS: SERIES 6250 REED/SOLID STATE SWITCHES REED AND SOLID STATE SWITCH SGNL .203 [5.2] WITH QUICK CONNECT .660 .660 [16.7] [16.7] .380 M8 THREAD [9.6] .876 [22.3] .071 .682 .318 [1.8] 1.088 .503 [17.3] [8.1] [27.6] [12.8] REED AND SOLID STATE .503 .158 SWITCH CABLED .380 [12.8] [4] [9.6] .183 .071 [4.6] .682 [1.8] .318 [17.3] 1.088 [8.1] .660 [27.6] [16.7] 61397-xx CORDSET WITH FEMALE QUICK CONNECT LETTER DIM. CABLE x  .177 [4.5] PIN 1 - BROWN WIRE MODEL NO. A LENGTH .335 [8.5] 78.7 3 wire A 61397-02 [2000] PIN 3 - BLUE WIRE PIN 2/4 - BLACK COLOR 197.0 3 wire 61397-05 [5000] NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE NOTE: THIS CORDSET IS USED FOR BOTH 3-WIRE AND 2-WIRE APPLICATIONS. WHEN USED IN 2-WIRE APPLICATIONS, REFER TO THE SCHEMATIC AND DISREGARD THE BLACK WIRE. All dimensions are reference only unless specifically toleranced. 9-15 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES ORDERING DATA: SERIES 1750 SWITCHES ORDERING DATA CORDSETS CABLE LENGTH WITH QUICK CONNECT 06 -6 ft [1.8 m] length cable TO ORDER SPECIFY: PART NO. LENGTH (Leave blank when quick Type, Cord Type, Sensing TYPE 63549-02 2 meter connect is specified) Circuitry, Design No., and Solid State, Reed 63549-05 5 meter Cable Length. 175 0 2-2 06 - NOTES: 1) Cordsets for quick connect switches must be ordered CORD TYPE SENSING separately. See page 9-17. 0- Cabled CIRCUITRY DESCRIPTION SWITCH COLOR 2) Other cable lengths 2- Quick Connect 2-2 NPN or PNP DC Reed White available. Consult PHD. 3-2 NPN DC Solid State Yellow 3) *CE certification not 4-2 PNP DC Solid State Red applicable to the AC Reed 9-3 *AC Reed w/Current Limiting Green with Current Limiting model. COMMON BENEFITS ■ Series 1750 switches are available for use on most Tom Thumb and PHD products for simple interfacing to many types of electrical controllers. ■ The compact low profile design saves space and provides mounting versatility. ■ Low profile bracket attaches securely across two tie rods and allows easy position adjustment over the entire piston travel of the cylinder or actuator. ■ IP67 Environmental Protection ■ Red LED indicator provides convenient method for position setting and troubleshooting. ■ Available in a cabled or 8 mm threaded Quick Connect model for easy installation and maintenance. ■ 24 AWG polyurethane (PUR) jacketed cable is robust and virtually impervious to chemical and environmental damage. ■ Multiple switches may be mounted to control or initiate any sequence or function. REED BENEFITS SOLID STATE BENEFITS ■ Solid state switches afford long life. Constant amplitude output ■ Available as either 10-30 VDC or 110-120 VAC models for simple interfacing to sequencers and programmable allows use with most digital logic systems. controllers. ■ Switch circuitry protects against voltage surges and other ■ Can be used to directly drive some types of relays or valve electrical anomalies associated with operating systems. solenoids. ■ Excellent switch hysteresis characteristics and symmetry. ■ Offered in 10-30 VDC current sinking and current sourcing versions for simple interfacing to electronic system controllers. 9-16 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES DIMENSIONS: SERIES 1750 SWITCHES SOLID STATE SWITCH MALE QUICK CONNECT DETAIL .286 Ø .200 [4.6] [7.3] 4° TYP LED INDICATOR 6 ft [1.8 m] CABLE x Ø .177 [4.5] .473 .323 [12] [8.2] .178 .322 1.000 [25.4] [4.52] [8.2] REED SWITCH MALE QUICK CONNECT DETAIL .286 .286 4.000 Ø .200 [4.6] [7.3] [7.3] [101.6] 4° TYP LED INDICATOR (5.590 [142]) 4° TYP 6 ft [1.8 m] CABLE x Ø .177 [4.5] .473 .473 .323 [12.0] [12.0] [8.2] .028 [.71] .178 .028 [.71] M8x1 Ø .177 [4.5] .314 .322 1.000 [25.4] .178 [4.52] .323 [8] .322 [8.2] [4.52] [8.2] [8.2] SWITCH BRACKETS CYLINDERS PART NUMBER DESCRIPTION 17000-xx-5 BORE SIZE 17494 Strain relief kit for non -5 brackets (-35-0 through -41-0) SERIES IMPERIAL METRIC COMPACT BRACKETS 18412 Strain relief kit for Series SD/SE Slide size 26 3/4 19 17000-31-5 1 25 17000-32-5 1.000 AV & HV .144 [3.7] MAX LED INDICATOR 1-1/8 29 17000-33-5 [25.4] 1-3/8 35 17000-34-5 3/4 19 17000-35-0 1-1/8 29 17000-36-0 17000-31-5 EA, EL, 1-3/8 35 17000-37-0 17000-32-5 & NEA 2 51 17000-40-0 17000-33-5 3 75 17000-41-0 17000-34-5 1-1/8 29 17000-33-5 NPG 1-3/8 35 17000-36-0 SWITCH BRACKET .429 [10.9] MAX .700 DOES NOT EXTEND [17.8] BEYOND CYLINDER IMPERIAL LARGE BORE CYLINDERS SD/SE SLIDES OUTLINE ON THIS SIDE *3-1/4" Bore C BORE SIZE COMPACT BRACKETS* BORE SIZE BRACKET & C Cylinders 1-1/2 17000-51-0 22 17000-31-5 require switch 2 17000-51-0 23 17000-32-5 bracket 17000-xx-0 2-1/2 17000-51-0 24 17000-33-5 5142-54-3. 3-1/4* 17000-51-0 25 17000-34-5 4 17000-51-0 26 58050-02 1.000 .500 [12.7] MAX LED INDICATOR 5, 6, & 8 [25.4] 17000-57-0 17000-35-0 ROTARY & MULTI-MOTION ACTUATORS .137 [3.5] MAX 17000-36-0 COMPACT BRACKETS SERIES LINEAR SECTION ROTARY SECTION 17000-37-0 1000 & 2000 17000-36-0 17000-32-5 17000-40-0 3000 & 4000 17000-37-0 17000-34-5 17000-41-0 5000 & 6000 17000-40-0 17000-38-0 7000 & 8000 17000-41-0 17000-39-0 SWITCH BRACKET DOES NOT EXTEND .690 MINIATURE 17000-35-0 — BEYOND CYLINDER OUTLINE ON THIS SIDE [17.5] NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE 63549-xx CORDSET WITH FEMALE QUICK CONNECT LETTER DIM. 1.299 MODEL NO. L [34.8] BLACK CONNECTOR PIN 2/4 PIN 1 .689 78.74 WIRE WIRE COLOR [19.3] 63549-02 BLACK CABLE COLOR BROWN [2 m] BLACK 196.85 63549-05 [5 m] PIN 3 Ø .402 WIRE COLOR NOTES: [10.2] L BLUE 1) For alternative supplier part numbers, see page 9-5. 2) For earlier design switches 1752x-1 and 17529-2, use cordset 17533-00-02 or 17533-00-05. All dimensions are reference only unless specifically toleranced. 9-17 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES SPECIFICATIONS: SERIES 1750 SWITCHES SPECIFICATIONS 17503-2 & 17523-2 17504-2 & 17524-2 17502-2 17509-3* OPERATING PRINCIPLE Solid State SPECIFICATIONS 17522-2 17529-3* ACTUATED BY Piston Magnet OPERATING PRINCIPLE Magnetic Reed INPUT VOLTAGE 10-30 VDC ACTUATED BY Piston Magnet OUTPUT TYPE NPN (Sink) PNP (Source) INPUT VOLTAGE 10-30 VDC 110-120 VAC CURRENT RATING 20 mA. Max 100 mA. Max POWER CAPACITY 10 Watt Max. 10 Watt Max. VOLTAGE DROP .5 VDC OUTPUT TYPE Contact Closure SWITCH BURDEN 10 mA. Max. CURRENT RATING 200 mA. Inter. Limited ENVIRONMENTAL IP67 Switched to 85 mA. OPERATING TEMP. 0° to 80°C CONTACT RESISTANCE .1 Ohm Max. .1 Ohm Max. ENVIRONMENTAL IP67 OPERATING TEMP. 0° to 80°C * CE certification not applicable to these switch models. SOLID STATE WIRING SCHEMATICS MODEL NO. 17503-2 & 17523-2 - NPN (SINK) MODEL NO. 17504-2 & 17524-2 - PNP (SOURCE) INPUT - 10-30 VDC INPUT - 10-30 VDC LOAD CURRENT - 20 mA. MAX. LOAD CURRENT - 100 mA. MAX. SWITCH HOUSING COLOR - YELLOW SWITCH HOUSING COLOR - RED (LED’s have been omitted from the schematic for clarity.) (LED’s have been omitted from the schematic for clarity.) CABLED MODEL 17503-2 CABLED MODEL 17504-2 DC DC BROWN BROWN BLACK LOAD BLACK LOAD BLUE BLUE DC DC QUICK CONNECT MODEL 17523-2 QUICK CONNECT MODEL 17524-2 BROWN BROWN DC 1 DC 1 PIN 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 2/4 LOAD 2/4 BLACK PIN 3 PIN 3 DC 3 DC 3 BLUE BLUE REED WIRING SCHEMATICS MODEL NO. 17502-2 & 17522-2 - NPN (SINK) OR PNP (SOURCE) MODEL NO. 17509-3 & 17529-3 INPUT - 120 VAC INPUT - 10-30 VDC POWER CAPACITY - 3 WATT MAX. SWITCHED POWER - 3 WATT MAX. LOAD CURRENT - 200 mA. MAX. INTERNAL RESISTANCE - 1.5 kOhm SWITCH HOUSING COLOR - WHITE SWITCH HOUSING COLOR - GREEN (Bi-polar LED emits a red light.) CABLED MODEL 17509-3 BROWN CABLED MODEL 17502-2 - NPN (SINK) BLACK LOAD DC BLUE BLUE BLACK LOAD BROWN DC QUICK CONNECT MODEL 17522-2 - NPN (SINK) QUICK CONNECT MODEL 17529-3 BROWN BROWN DC 1 1 PIN 3 PIN 1 PIN 2/4 LOAD PIN 2/4 LOAD 2/4 BLACK 2/4 BLACK PIN 1 PIN 3 DC 3 3 BLUE BLUE CABLED MODEL 17502-2 - PNP (SOURCE) DC BROWN BLACK LOAD BLUE DC QUICK CONNECT MODEL 17522-2 - PNP (SOURCE) BROWN DC 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 3 DC 3 BLUE 9-18 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES SWITCH SWITCH SWITCH SWITCH LINE LINE ORDERING DATA: SERIES 5580 PROXIMITY SWITCHES TO ORDER SPECIFY: CABLE LENGTH Type, Cord Type, Sensing Circuitry, 02 -2 meter length cable CORDSETS Design No., and Cable Length. WITH QUICK CONNECT (Leave blank when quick TYPE connect is specified) PART NO. LENGTH Hall, Reed 63549-02 2 meter 63549-05 5 meter 558 0 2-1 02 - CORD TYPE SENSING 0- Cabled CIRCUITRY DESCRIPTION SWITCH COLOR 2- Quick Connect 2 - 1 NPN or PNP DC Reed White NOTES: 3 - 1 NPN DC Hall Yellow 1) Cordsets for quick connect switches 4 - 1 PNP DC Hall Red must be ordered separately. 2) Other cable lengths available. Consult PHD. BENEFITS ■ Series 5580 Proximity Switches are available for use on selected PHD products making it easy to interface these actuators with various electronic controls. ■ Hall Effect Switches are solid state for long life and elimination of contact bounce. Constant amplitude output is provided for use with most digital logic systems. ■ Low profile mounting is easy to adjust at the ends of travel of the slide or gripper. ■ LED indicator provides convenient means for positioning and troubleshooting circuits. An LED shows when the switch output is on. ■ Available in a Quick Connect model for easy installation and maintenance. HALL EFFECT REED PHD Series 5580 Hall Effect Proximity Switches are PHD Series 5580 Reed Switches are available in a DC model. designed specifically to provide an input signal to various types They are ideal for use as inputs for many types of sequencers and of programmable controllers or logic systems. Since Hall Effect programmable controllers. In some cases, they can be used to Switches are solid-state, there are no moving parts to wear out. The drive some relays or valve solenoids. However, electrical transients switches offer an infinite number of trouble-free operations. Hall (inrush currents or line spikes) associated with inductive or Effect Switches operate on DC current only. capacitive loads can damage and shorten the life of the switch. SPECIFICATIONS 55803 & 55823 55804 & 55824 SPECIFICATIONS 55802 & 55822 OPERATING PRINCIPLE Hall Effect OPERATING PRINCIPLE Magnetic Reed ACTUATED BY Target Magnet ACTUATED BY Target Magnet INPUT VOLTAGE 4.5 to 24 VDC INPUT VOLTAGE 4.5 to 24 VDC OUTPUT TYPE NPN (Sink) PNP (Source) OUTPUT TYPE NPN (Sink) or CURRENT RATING 20 mA. Max. 100 mA. Max. PNP (Source) VOLTAGE DROP .5 VDC Max. CURRENT RATING 200 mA. Switched SWITCH BURDEN 12 mA. Max. CONTACT RESISTANCE .090 Ohm Max. ENVIRONMENTAL IP67 ENVIRONMENTAL IP67 OPERATING TEMP. 0° to 80°C OPERATING TEMP. 0° to 80°C 9-19 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES DIMENSIONS: SERIES 5580 PROXIMITY SWITCHES HALL EFFECT AND REED SWITCH .118 2 m CABLE x Ø .134 [3.4] [3.0] .118 .236 [6.0]SQ [3.0] 1.180 [30.0] HALL EFFECT AND REED SWITCH WITH MALE QUICK CONNECT CABLE x  .134 [3.40] [M8x1] .236 [6.0] SQ 4.000 [102.0] (5.550 [141]) 1.180 [30.0] 63549-xx CORDSET WITH FEMALE QUICK CONNECT LETTER DIM. A PIN 1 MODEL NO. A PIN 2/4 WIRE COLOR WIRE COLOR 78.74 BROWN BLACK 63549-02 [2 m] 196.85 PIN 3 63549-05 .689 [19.3] CABLE x  .177 [4.5] [5 m] WIRE COLOR 1.299 [34.8] BLUE  .402 [10.2] NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE HALL EFFECT WIRING SCHEMATICS MODEL NO. 55803 & 55823 - NPN (SINK) MODEL NO. 55804 & 55824 - PNP (SOURCE) INPUT - 4.5-24 VDC INPUT - 4.5-24 VDC LOAD CURRENT - 20 mA. MAX. LOAD CURRENT - 100 mA. MAX. SWITCH HOUSING COLOR - YELLOW SWITCH HOUSING COLOR - RED (LED has been omitted from the schematic for clarity.) (LED has been omitted from the schematic for clarity.) CABLED MODEL 55803 CABLED MODEL 55804 DC DC BROWN BROWN BLACK LOAD BLACK LOAD BLUE BLUE DC DC QUICK CONNECT MODEL 55823 QUICK CONNECT MODEL 55824 BROWN BROWN 1 1 DC DC PIN 1 PIN 1 PIN 2/4 LOAD 2/4 BLACK PIN 2/4 LOAD 2/4 BLACK PIN 3 PIN 3 3 3 DC DC BLUE BLUE REED WIRING SCHEMATICS MODEL NO. 55802 & 55822 - NPN (SINK) OR PNP (SOURCE) LOAD CURRENT - 200 mA. MAX. INPUT - 4.5-24 VDC SWITCH HOUSING COLOR - WHITE (Bi-polar LED emits a green light in the Sinking circuit and a red light in the Sourcing circuit.) CABLED MODEL 55802 - NPN (SINK) CABLED MODEL 55802 - PNP (SOURCE) DC DC BLUE BROWN BLACK LOAD BLACK LOAD BROWN BLUE DC DC QUICK CONNECT MODEL 55822 - NPN (SINK) QUICK CONNECT MODEL 55822 - PNP (SOURCE) BROWN BROWN 1 1 DC DC PIN 3 PIN 1 LOAD PIN 2/4 LOAD PIN 2/4 2/4 BLACK 2/4 BLACK PIN 1 PIN 3 DC 3 DC 3 BLUE BLUE 9-20 All dimensions are reference only unless specifically toleranced. PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES SWITCH SWITCH SWITCH SWITCH ORDERING DATA: MODEL 6790 SWITCHES ORDERING DATA CORDSETS WITH QUICK CONNECT PART NO. LENGTH CABLE LENGTH TO ORDER SPECIFY: CABLE TYPE 63549-02 2 meter 05 - 5 meter length cable Product Type, Cable Type, Leave blank when quick 63549-05 5 meter 0 - Cabled Sensing Circuitry, Cable Length 2 - Quick Connect connect is specified NOTES: 1) Cordsets for quick connects must be ordered separately. 679 0 2-1 - 05 2) *AC Reed (9-2) available with quick connect only. PRODUCT TYPE SENSING CIRCUITRY AVAILABLE MODELS Reed 2-1 PNP or NPN DC Reed 67902-1-05 9-2 AC Reed 67922-1 67929-2 BENEFITS ■ Model 6790 Switches are available for use on many actuators. ■ Saving space and providing mounting versatility, the round design fits into grooves in the body of the actuator. ■ IP67 Environmental Protection ■ LED indicator provides convenient method for position setting and troubleshooting. ■ Available in 8 mm threaded Quick Connect model for easy installation and maintenance. ■ 28 AWG Polyurethane (PUR) jacketed cable ■ Multiple switches may be mounted to control or initiate any sequence or function. ■ Available in 4.5 - 30 VDC or 65 - 120 VAC models for simple interfacing to sequencers and programmable controllers. ■ Can be used to directly drive some types of relays or valve solenoids within the switch specifications stated. SPECIFICATIONS 67902 & 67922 67929 OPERATING PRINCIPLE Magnetic Reed ACTUATED BY Piston Magnet INPUT VOLTAGE 4.5 - 30 VDC 65 - 120 VAC OUTPUT TYPE Contact Closure CURRENT RATING 50 mA Max. 25 mA Max. ENVIRONMENTAL IP67 OPERATING TEMP. -20° to 85°C IMPEDANCE .12 Ohm Max 1.5 k Ohm 9-21 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES BENEFITS: MODEL 6790 SWITCHES 1.100 [27.9] .777 [19.7] MALE QUICK CONNECT DETAIL .136 [3.5] LED .078 [2] 12.0 [305] 1.736 [44] M8 x 1 THREAD .260 [6.6] .108 [2.7] .156 [3.9] .095 [2.4] 3-48 x 3/16 [4.8] Ø .315 [8] .236 [6] SET SCREW .050 [1.3] HEX* .134 [3.4] .102 [2.6] .180 [4.6] *MAX. SCREW TORQUE 1.0 in-lb [.110 Nm] METRIC INFORMATION SHOWN IN [ ] SOLID STATE WIRING SCHEMATICS MODEL NO. 67903-1 & 67923-1 - NPN (SINK) MODEL NO. 67904-1 & 67924-1 - PNP (SOURCE) INPUT: 4.5 - 30 VDC INPUT: 4.5-30 VDC LOAD CURRENT: 50 mA. MAX. LOAD CURRENT: 50 mA. MAX. 63549-xx CORDSET WITH FEMALE QUICK CONNECT SWITCH HOUSING COLOR: BLACK SWITCH HOUSING COLOR: BLACK (Bi-polar LED emits a yellow light) (Bi-polar LED emits a red light.) CABLED MODEL 67903 1.299 CABLED MODEL 67904 [34.8] DC DC BROWN BROWN BLACK CONNECTOR PIN 1 .689 LETTER DIM. WIRE COLOR BLACK LOAD BLACK LOAD [19.3] BLACK CABLE PIN 2/4 BROWN MODEL NO. L WIRE COLOR BLUE BLUE DC DC BLACK 63549-02 78.74 [2 m] QUICK CONNECT MODEL 67923 QUICK CONNECT MODEL 67924 PIN 3 63549-05 196.85 [5 m] Ø .402 BROWN DC WIRE COLOR BROWN PIN 1 1 [10.2] DC PIN 1 1 L BLUE LOAD 2/4 BLACK PIN 2/4 PIN 2/4 LOAD 2/4 BLACK PIN 3 3 DC 3 PIN 3 BLUE DC BLUE REED WIRING SCHEMATICS MODEL NO. 67902-1 & 67922-1 - NPN (SINK) OR PNP (SOURCE) INPUT: 4.5 - 30 VDC LOAD CURRENT: 50 mA. MAX. IMPEDANCE: .12 Ohm MAX. SWITCH HOUSING COLOR: BLACK (LED emits a red light) CABLED MODEL 67902 - NPN (SINK) CABLED MODEL 67902 - PNP (SOURCE) DC DC BLUE BROWN BLACK LOAD BLACK LOAD BROWN BLUE DC DC QUICK CONNECT MODEL 67922 - NPN (SINK) QUICK CONNECT MODEL 67922 - PNP (SOURCE) DC BROWN BROWN DC PIN 3 PIN 1 1 1 PIN 2/4 LOAD 2/4 BLACK PIN 2/4 LOAD 2/4 BLACK PIN 1 3 PIN 3 DC 3 DC BLUE BLUE AC REED WIRING SCHEMATICS MODEL NO. 67929-2 QUICK CONNECT MODEL 67929-2 INPUT: 65 - 120 VDC BROWN PIN 1 LOAD CURRENT: 25 mA. MAX. 1 IMPEDANCE: 1.5 k Ohm PIN 2/4 LOAD 2/4 BLACK SWITCH HOUSING COLOR: BLACK PIN 3 3 (LED emits a red light) BLUE 9-22 All dimensions are reference only unless specifically toleranced. PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH SWITCH LINE ORDERING DATA: MODEL JC1 SWITCHES TYPE TO ORDER SPECIFY: DESIGN NO. D- DC Single Position PRODUCT Product, Series, Design No., J - Switches T- DC 2 Position Teachable Options, Type, Circuit Type, and Cable Options. - J CP 1 S T 2 CIRCUIT TYPE CABLE OPTIONS SERIES OPTIONS N - NPN K- Quick Connect C - C-Slot Mounting S - Solid State P - PNP 2- 2 Meter Cable (Available on JC1STP only) (DC 2 position 5- 5 Meter Cable (Not available on JC1STP) teachable available in PNP only) SWITCH CROSS REFERENCE CHART CURRENT 6790 SWITCH NEW PHD SWITCH DESCRIPTION 67902-1-02 no direct substitute*† PNP or NPN DC Reed, 2 meter Cable 67902-1-05 no direct substitute*† PNP or NPN DC Reed, 5 meter Cable 67903-1-02 JC1SDN-5 NPN DC Solid State, 2 meter Cable 67903-1-05 JC1SDN-5 NPN DC Solid State, 5 meter Cable 67904-1-02 JC1SDP-5 PNP DC Solid State, 2 meter Cable 67904-1-05 JC1SDP-5 PNP DC Solid State, 5 meter Cable 67922-1 no direct substitute*† PNP or NPN DC Reed, Quick Connect 67923-1 JC1SDN-K NPN DC Solid State, Quick Connect 67924-1 JC1SDP-K PNP DC Solid State, Quick Connect 67929-2 still available AC Reed, Quick Connect *Consider Solid State to replace DC Reed. † CAUTION: If used for 67902-1-xx or 67922-1 Switch replacement, power connection (brown and blue leads) may need to be reversed to match connection diagram on page 6. 9-23 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES BENEFITS: SERIES JC1 SWITCHES TEACHABLE Teachable Series JC1 Switches • Teachable switches feature two programmable outputs. Switch is simply mounted in a convenient location, such as middle of travel, then actuator is placed in first desired position and first output is set. Then actuator is placed in second desired position and second output is set. Outputs retain settings even after power interruption. Use two position teachable switches for: • Since each switch provides two outputs, an actuator with only two slots may have up to four outputs by • Reduced cabling using two switches. • Offered in 12 – 30 VDC current sourcing (PNP) version only • Simplified setup, • Available in cabled (2 meter) or quick connect versions. • More sensing positions STANDARD Standard Series JC1 Switches • Available in cabled (5 meter) or quick connect versions Standard JC1 • Available in solid state sensing only for longest life and most Switches reliable operation can be used on many • Offered in 10 – 30 VDC current sinking (NPN) and current PHD Standard sourcing (PNP) versions for simple interfacing to system controllers. Actuators • Replaces PHD Series 6790 Switches (excluding AC applications) See chart on page 2. Common Benefits for Both Styles Recommended PHD Products Use • GRIPPERS: Series GRK, EGRK, GRB, • Fits into 4mm switch slot GRF (JC1SD only), & GRS (JC1SD only) • IP67 Environmental Protection • ROTARY ACTUATORS: Series RI, RCC • LED indicator for convenient setting and troubleshooting • SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & • Integrated protection circuitry including short circuit protection SxL, SxH • Polyurethane (PUR) jacketed cable • CYLINDERS: Series CRS & CTS • Available in solid state sensing only for longest life and most reliable operation • Improved switch hysteresis and magnetic response uniformity • Quick connect available Both switches have a unique housing Tilt switch design which allows “drop-in” to drop in, then installation from the side, does not have rotate logo up. to be inserted from the end of the slot 9-24 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES PART NO. SWITCH DESCRIPTION JC1STP-2 PNP (Source), Solid State, 12-30 VDC, 2 meter cable JC1STP-K PNP (Source), Solid State, 12-30 VDC, Quick Connect MATCHING CORDSET DIMENSIONS: SERIES JC1ST TEACHABLE SWITCHES PART NO. DESCRIPTION 81284-1-001 M8, 4 pin, Straight Female Connector, 5 meter cable SERIES JC1ST TWO POSITION SPECIFICATIONS JC1STP-x TEACHABLE TEACHABLE MAGNETIC SWITCH OPERATING PRINCIPLE Programmable Magnetic This switch provides the ability to identify two separately Field Characterization INPUT VOLTAGE 12 - 30 VDC programmable positions with a single switch. Programmable capability means no “fine-tuning.” With switch properly aligned, NUMBER & TYPE OF OUTPUTS Two PNP (source), just place actuator in desired positions and program. Solid-state separately adjustable OUTPUT CURRENT 100 mA max., sensing technology provides a highly reliable switch. Elliptical Short Circuit Protection housing allows for easy “drop-in” installation from the side, and VOLTAGE DROP  2.2 VDC does not have to be inserted from the end of the slot. LED indicators SWITCH BURDEN  15 mA on module for positioning and programming. Available with 2 meter ENVIRONMENTAL IP67 cable or 8 mm threaded Quick Connect. OPERATING TEMP. -20C to 75C TYP. DETECTION AREA 0-50 mm DETECTION AREA JC1STP-2 3.750 [95.25] .150 .020 [3.8] [0.5] .768 .177 1.181 [19.5] [4.5] [30] .256 .113 [6.5] [2.87] JC1STP-K (Quick Connect) 81284-1-001 CORDSET PIN 4 FOR SWITCH DIMENSIONS FOR TEACH MODULE WIRE PIN 2 SEE ABOVE DIMENSIONS SEE ABOVE COLOR WIRE M8 x 1 BLACK COLOR WHITE M8 x 1 PIN 1 PIN 3 WIRE 1.200 1.349 WIRE COLOR [30.5] [34.3] COLOR  .394 BROWN 19.125 BLUE [10] [485.78] ENGINEERING DATA: SERIES JC1ST TEACHABLE SWITCHES PART NO. SWITCH DESCRIPTION JC1STP-2 PNP (Source), Solid State, 12-30 VDC, 2 meter cable JC1STP-K PNP (Source), Solid State, 12-30 VDC, Quick Connect MATCHING CORDSET PART NO. DESCRIPTION 81284-1-001 M8, 4 pin, Straight Female Connector, 5 meter cable SPECIFICATIONS JC1STP-x JC1STP-2 OPERATING PRINCIPLE Programmable Magnetic Field Characterization INPUT VOLTAGE 12 - 30 VDC NUMBER & TYPE OF OUTPUTS Two PNP (source), separately adjustable OUTPUT CURRENT 100 mA max., Short Circuit Protection VOLTAGE DROP  2.2 VDC SWITCH BURDEN  15 mA ENVIRONMENTAL IP67 OPERATING TEMP. -20C to 75C TYP. DETECTION AREA 0-50 mm DETECTION AREA 9-25 JC1STP-2 3.750 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 [95.25] .150 .020 [3.8] [0.5] .768 .177 1.181 [19.5] [4.5] [30] .256 .113 [6.5] [2.87] JC1STP-K (Quick Connect) 81284-1-001 CORDSET PIN 4 FOR SWITCH DIMENSIONS FOR TEACH MODULE WIRE PIN 2 SEE ABOVE DIMENSIONS SEE ABOVE COLOR WIRE M8 x 1 BLACK COLOR WHITE M8 x 1 PIN 1 PIN 3 WIRE 1.200 1.349 WIRE COLOR [30.5] [34.3] COLOR  .394 BROWN 19.125 BLUE [10] [485.78] SWITCHES PROGRAMMING GUIDE: SERIES JC1 TEACHABLE SWITCHES            
              
        ­€ ‚   ­€ƒƒ   ƒ   ƒ      „     ­€      …  „    ­€    …  ­€      ­€  ­€ …    †€ ‡ˆ      9-26 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES PART NO. SWITCH DESCRIPTION JC1SDP-5 PNP (Source), Solid State, 10-30 VDC, 5 meter cable JC1SDP-K PNP (Source), Solid State, 10-30 VDC, Quick Connect JC1SDN-5 NPN (Sink), Solid State, 10-30 VDC, 5 meter cable JC1SDN-K NPN (Sink), Solid State, 10-30 VDC, Quick Connect MATCHING CORDSET PART NO. DESCRIPTION SWITCH ON OPEN 63549-02 M8, 3 pin, Straight Female Connector, 2 meter cable 63549-05 M8, 3 pin, Straight Female Connector, 5 meter cable SPECIFICATIONS JC1SDP-x JC1SDN-x OPERATING PRINCIPLE Solid State Detection of Moving Magnet DIMENSIONS: SERIES JC1SD STANDARD SWITCHES INPUT VOLTAGE 10 - 30 VDC OUTPUT TYPE PNP (source) NPN (sink) OUTPUT CURRENT 100 mA max., Short Circuit Protection HS3 SERIES JC1SD MAGNETIC SWITCH VOLTAGE DROP 2.5 VDC 7.0 HS1 [18.0] SWITCH BURDEN 8 mA This switch provides the ability to identify a single position. (SIZE 35 & 46) STANDARD (SIZE 58 & 75- ENVIRONMENTAL IP67 Solid-state sensing technology provides a highly reliable switch. SWITCH HOUSING OPERATING TEMP. -25 C to 75 C DOES NOT PROTRUDE Elliptical housing allows for easy “drop-in” installation. Includes BELOW SURFACE LED indicator for convenient means of positioning. Available with OF GRIPPER) PNP or NPN output. Available with cable or 8 mm threaded Quick MODEL NUMBER Connect. LETTER GRK-x-35 X 6.5 or 12 GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26 DIM mm mm mm mm in in in in HS1 .220 5.6 .015 .4 HS3 .125 3.2 .430 10.9 .640 16.3 .850 21.6 JC1SDx-5 .140 .984 [3.6] [25] JC1SDP-x JC1SDN-x 196.85 .111 MIN [5 m] [2.8] JC1SDx-K (Quick Connect) .140 .984 [3.6] [25] 63549-xx CORDSET M8 x 1 PIN 1 PIN 2/4 WIRE COLOR WIRE COLOR BROWN .111 BLACK 1.349 [2.8] [34.3] 9.250 MIN [234.0] PIN 3 .689 WIRE COLOR [19.3] .402 BLUE 1.299 [10.2] [34.8] ENGINEERING DATA: SERIES JC1SD STANDARD SWITCHES PART NO. SWITCH DESCRIPTION JC1SDP-5 PNP (Source), Solid State, 10-30 VDC, 5 meter cable JC1SDP-K PNP (Source), Solid State, 10-30 VDC, Quick Connect JC1SDN-5 NPN (Sink), Solid State, 10-30 VDC, 5 meter cable JC1SDN-K NPN (Sink), Solid State, 10-30 VDC, Quick Connect MATCHING CORDSET PART NO. DESCRIPTION SWITCH ON OPEN 63549-02 M8, 3 pin, Straight Female Connector, 2 meter cable JC1SDP-5 & JC1SDN-5 63549-05 M8, 3 pin, Straight Female Connector, 5 meter cable SPECIFICATIONS JC1SDP-x JC1SDN-x OPERATING PRINCIPLE Solid State Detection of Moving Magnet INPUT VOLTAGE 10 - 30 VDC OUTPUT TYPE PNP (source) NPN (sink) OUTPUT CURRENT 100 mA max., Short Circuit Protection HS3 VOLTAGE DROP 2.5 VDC 7.0 HS1 [18.0] SWITCH BURDEN 8 mA (SIZE 35 & 46) (SIZE 58 & 75- ENVIRONMENTAL IP67 SWITCH HOUSING OPERATING TEMP. -25 C to 75 C DOES NOT PROTRUDE 63549-XX JC1SDP-K & JC1SDN-K BELOW SURFACE OF GRIPPER) MODEL NUMBER 9-27 LETTER GRK-x-35 X 6.5 or 12 GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26 DIM in mm in mm in mm in mm • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 HS1 .220 5.6 .015 .4 3.2 10.9 16.3 21.6 HS3 .125 .430 .640 .850 JC1SDx-5 .140 .984 [3.6] [25] 196.85 .111 MIN [5 m] [2.8] JC1SDx-K (Quick Connect) .140 .984 [3.6] [25] 63549-xx CORDSET M8 x 1 PIN 1 PIN 2/4 WIRE COLOR WIRE COLOR BROWN .111 BLACK 1.349 [2.8] [34.3] 9.250 MIN PIN 3 .689 [234.0] WIRE COLOR [19.3] .402 BLUE 1.299 [10.2] [34.8] SWITCHES APPLICATIONS: SERIES JC1 STANDARD SWITCHES Series JC1SD Magnetic Switches Series GRF (JC1SD only) replace the old style Series 6790 DC Switches and can be used on all standard PHD Components listed. • GRIPPERS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only) • ROTARY ACTUATORS: Series RI, RCC • SLIDES: Series SFP, SFM, SHP, STP, SIP, Series SxH SMx, & SxL, SxH • CYLINDERS: Series CRS & CTS Series CR Old Series 6790 Switch Series CTS Series GRB Series GRS (JC1SD only) Series SFM, SFP Series SIP Series STP Series RCC Series GRK Series RI Series SHP 9-28 PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES DC INDUCTIVE PROXIMITY SWITCHES 4 mm ROUND 6 mm SQUARE PART NO. DESCRIPTION PART NO. DESCRIPTION 18431-001-02 NPN (Sink) 10-30 VDC, 2 meter cable 18430-001-02 NPN (Sink) 10-30 VDC, 2 meter cable 18431-002-02 PNP (Source) 10-30 VDC, 2 meter cable 18430-002-02 PNP (Source) 10-30 VDC, 2 meter cable 12 mm THREADED 8 mm THREADED PART NO. DESCRIPTION PART NO. DESCRIPTION 51422-005-02 NPN (Sink) 10-30 VDC, 2 meter cable 15561-001 NPN (Sink) 10-30 VDC, 3 meter cable 51422-006-02 PNP (Source) 10-30 VDC, 2 meter cable 15561-002 PNP (Source) 10-30 VDC, 3 meter cable 15561-003 20-250 VAC, 3 meter cable BENEFITS ■ Suitable for plant environments where dirt and contamination create difficulties for electromechanical and other types of ■ High reliability provided by solid state inductive sensing switches. technology. ■ LED indicator circuits are standard on 4 mm round, 6 mm ■ Ease of mounting with PHD’s Proximity Switch Bracket Kit and square, and 8 mm threaded and provide a convenient means of Target Kits for grippers. These kits include all hardware for positioning and troubleshooting. mounting the switch and the target that is used to actuate the switch. (See Slide and Gripper sections for details.) 18430-001-02 18430-002-02 SPECIFICATIONS 18431-001-02 18431-002-02 51422-005-02 51422-006-02 15561-001 15561-002 15561-003 2 meter cordset for all Series 5580 Switches with Quick 2 meter cordset for all Series 5580 Switches with Quick INPUT VOLTAGE 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 20 to 250 VAC Connect. Other cable lengths available - contact PHD. Connect. Other cable lengths available - contact PHD. OUTPUT TYPE NPN (Sink) PNP (Source) NPN (Sink) PNP (Source) NPN (Sink) PNP (Source) Solid State SENSING RANGE 0.8 mm Max. 0.8 mm Max. 1.5 mm Max. 1.5 mm Max. 1.6 mm Max. 1.6 mm Max. 1.6 mm Max. OUTPUT CURRENT RATING 100 mA. Max. 100 mA. Max. 200 mA. Max. 200 mA. Max. 200 mA Max. 200 mA Max. 130 mA Max. SWITCH BURDEN 10 mA. Max. 10 mA. Max. 10 mA. Max. 10 mA. Max. 8 mA Max. 8 mA Max. — VOLTAGE DROP 2.5 VDC Max. 2.5 VDC Max. 1.0 VDC Max. 1.0 VDC Max. 1.5 V Max. 1.5 V Max. 11 V Max. CIRCUIT PROTECTION YesYes No No Yes Yes No REVERSE VOLTAGE Yes Yes OUTPUT STATE Normally Open Normally Open ENVIRONMENTAL IP67 IP68 WIRING SCHEMATICS 2 meter cordset for all Series 5580 Switches with Quick DC NPN (Sink) DC PNP (Source) Connect. Other cable lengths available - contact PHD. MODEL 15561-001 MODEL 15561-002 18430-001-02 18430-002-02 AC 18431-001-02 18431-002-02 MODEL 15561-003 51422-005-02 51422-006-02 DC DC LINE BROWN BROWN BROWN BLACK LOAD BLACK LOAD LOAD BLUE BLUE BLUE DC DC NEUTRAL 9-29 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCH SWITCH SWITCH SWITCHES SERIES 62002 SWITCHES SERIES 62002 8 mm ROUND THREADED PROXIMITY SWITCH PART NO. DESCRIPTION 62002-1-02 8 mm Threaded Reed Switch with 2 meter cable SPECIFICATIONS 62002-1-02 OPERATING PRINCIPLE Magnetic Reed ACTUATED BY Target Magnet INPUT VOLTAGE 4.5 to 24 VDC OUTPUT VOLTAGE Contact Closure POWER CAPACITY 1.0 Watt Max. CURRENT RATING 40 mA Max. CONTACT RESISTANCE .200 Ohm Max. ENVIRONMENTAL IP67 OPERATING TEMP. 0 to 70C 1.075 74.74  .79 [27.31] [1900  20] .990 [25.15] .795 [20.19] .085 2x .160 .59 .220 [2.16] [4.1] [14.99] [5.59] .276  .040 [7  1] .51 [12.95] .984  .080 2x .265 [25  2.03] [6.73] LED IN THIS APPROX LOCATION M8 HEX NUT (2 SUPPLIED) (M8 x 1.0-6g THREAD) SERIES 62002 PROXIMITY WIRING SCHEMATICS MODEL NO. 62002-1-02 - NPN (SINK) OR PNP (SOURCE) INPUT - 4.5-24 VDC POWER CAPACITY - 1.0 WATT MAX. LOAD CURRENT - 40 mA MAX. CABLED MODEL 62002 - PNP (SOURCE) CABLED MODEL 62002 - NPN (SINK) DC DC BROWN BROWN LOAD LOAD BLUE BLUE DC DC NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE 9-30 All dimensions are reference only unless specifically toleranced. PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES SWITCH SWITCH BENEFITS: HALL SENSOR WITH SET POINT MODULE BENEFITS ■ Provides independent and fully adjustable multiple position sensing on Series 8400 Angular Grippers, Series 190 & 191 Parallel and 190 Angular Grippers, Series 5300 Oval Grippers, and all Rotary Actuators and Multi-Motion Actuators. ■ Independent adjustment of two set point positions from two sensors allows one set point module to interface with two actuators. Or, can be used with a single unit providing 4 adjustable set points throughout jaw travel or rotation. ■ Solid state electronics with Hall Effect sensing technology for an infinite number of trouble-free cycles. SPECIFICATIONS 9800-01-0300 9800-01-0400 OPERATING PRINCIPLE Linear Hall Effect ■ Wide signal range capability permits interfacing with most INPUT VOLTAGE 18 to 24 VDC programmable controllers and other logic systems. OUTPUT TYPE NPN (Sink) PNP (Source) Open Collector Collector Output ■ LED indicators for visual confirmation of each output state. OUTPUT VOLTAGE 4.5 to 24 VDC ■ Set Point Module is available for either current sinking or OUTPUT CURRENT RATING 200 mA. Max. current sourcing models with 4.5 to 24 VDC output capability. OUTPUT VOLTAGE DROP .4 VDC Max. .5 VDC Max. at Rated Current at 50 mA. SWITCH BURDEN 150 mA. Max. OPERATING TEMP. 0° to 60°C (32° to 140°F) HUMIDITY 5 to 95% (NON CONDENSING) ORDERING DATA: HALL SENSOR WITH SET POINT MODULE HALL EFFECT SENSOR/TRANSDUCER DUAL INPUT SET POINT MODULE The Sensor/Transducer must be ordered as part of the Gripper PART NO. DESCRIPTION or Actuator assembly. The Sensor/Transducer will be mounted to 9800-01-0300 NPN (Sink) 4.5-24 VDC the unit with a transition plate. See individual unit Ordering Data for 9800-01-0400 PNP (Source) 4.5-24 VDC availability and ordering information. Individual replacement sensors are available as shown. HALL SENSOR KIT FOR SERIES 190, 191, & 8400 MINIATURE GRIPPERS PART NO. APPLICATIONS DESCRIPTION IMPERIAL METRIC 18674-04 18057-04 Size 6 Models 19x60, 19x61, & 19x62 Parallel GRIPPERS 18675-04 18058-04 Size 7 Models 19x70, 19x71, & 19x72 Parallel ■ Provides two adjustable sensing positions throughout jaw Size 8 Models 19x80, 19x81, & 19x82 Parallel 18676-04 18059-04 travel for two grippers (through a single set point module). Size 9 Models 19x90, 19x91, & 19x92 Parallel 18677-04 18060-04 — 18057-04 Size 0 Model 19x02 Angular ■ Allows the assurance of part presence by ensuring the jaws — 18058-04 Size 1 Model 19x12 Angular have closed or opened to the proper size. — 18059-04 Size 2 Model 19x22 Angular Size 3 Model 19x32 Angular — 18060-04 ■ Permits “go, no go” type gauging to occur as parts are 8400 Gripper Angular 10906-12 — gripped. 10907-12 — 8410 Gripper Angular 10908-12 — 8420 Gripper Angular 8430 Gripper Angular 18686-04 — ROTARY ACTUATORS & MULTI-MOTION ACTUATORS INDIVIDUAL REPLACEMENT SENSORS ■ Provides two adjustable sensing positions throughout PART NO. DESCRIPTION the 180° rotation of two rotary actuators or multi-motion 10688-2-12 Sensor for all 8600, 7900, and 5300 Angular Grippers, actuators. and 8600 Parallel Grippers 10832-1-1-12 Sensor for all Rotary Actuators and Multi-Motion Actuators ■ Can be used to signal ends of rotation of two units. NOTE: All sensors come with 12 ft [3 m] minimum of shielded cable. 9-31 2 meter cordset for all Series 5580 Switches with Quick • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 Connect. Other cable lengths available - contact PHD. SWITCHES DIMENSIONS: HALL SENSOR & SET POINT MODULE DUAL INPUT SET POINT LOGIC EXAMPLE A B A B A B A B CASE 1 CASE 2 CASE 3 CASE 4 Both gripper jaws are wide open. No set The jaws of gripper A are closed to grip a Both gripper jaws are closed to grip a part. Gripper A jaws are closed all the way (no points are made. part and are wide open on gripper B. One Two set points are made, one for gripper A parts) and Gripper B jaws are closed to grip set point is made for gripper A. and one for gripper B. a part. Two set points for gripper A and one set point for gripper B are made. SET POINT OUTPUT B1 B2 CASE A1 A2 A B A B 1 0 0 0 0 2 1 0 0 0 3 1 0 1 0 CASE 5 CASE 6 4 1 1 1 0 Both gripper jaws are closed all the way (no In the event one gripper is wide open (A) 5 1 1 1 1 parts). Two set points are made for both and the other is closed all the way (B), only 6 0 0 1 1 grippers A and B. the two set points for the closed gripper would be made. .625 [28.5] .500 [13.0] 10688-2-012 BASIC HALL SENSOR .125 1.125 [28.5] [28.5] 12 FT [4 m] OF SHIELDED .246 2X THRU HOLE CABLE IS INCLUDED WITH SENSOR [6.0] FOR #6 SCREWS .375 .237 [6.0] [9.5] SERIES 7900, 8600 3-JAW, & 5300 GRIPPER LETTER DIMENSION ANGULAR GRIPPERS MODEL NO. A B C 792x, 862x, & 1532x .854 [21.5] 1.257 [32.0] 0.00 [0.0] 793x, 863x, & 1533x .917 [23.5] 1.540 [39.0] .122 [3.0] B 794x, 864x, & 1534x 1.112 [28.5] 1.945 [49.5] .247 [6.0] 30° 795x, 865x, & 1535x 1.586 [40.5] 2.500 [63.5] .441 [11.0] A C SERIES 8400 & 190 ANGULAR GRIPPERS GRIPPER MODEL NO. LETTER DIMENSION IMPERIAL METRIC A B C 840x 19002 1.354 [36.5] .654 [16.5] .700 [20.0] .375 .187 [5.0] 841x 19012 1.454 [39.5] .554 [14.0] .900 [25.0] B [9.5] 842x 19022 1.704 [46.0] 1.400 [38.0] .304 [7.6] 1.910 [50.0] 843x 19032 2.237 [58.0] .300 [7.6] C A SERIES 190 & 191 PARALLEL GRIPPERS GRIPPER LETTER DIMENSION MODEL NO. A C B 19x6x 1.437 [36.5] .787 [20.0] .650 [16.5] 19x7x 1.555 [39.5] .985 [25.0] .375 .550 [14.0] [9.5] 19x8x 1.810 [46.0] 1.496 [38.0] .295 [7.5] .187 B [5.0] 19x9x 2.283 [58.0] .295 [7.5] 1.968 [50.0] C A 9-32 All dimensions are reference only unless specifically toleranced. PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES DIMENSIONS: HALL SENSOR & SET POINT MODULE SERIES 1000-8000 ROTARY ACTUATORS & MULTI-MOTION ACTUATORS 3 m SHIELDED CABLE FROM THIS SIDE ON SERIES 1000 & 2000 UNITS ONLY .500 [12.7] A ACTUATOR LETTER DIM. B SERIES A B 3 m SHIELDED CABLE FROM THIS SIDE ON SERIES 3000-8000 UNITS 1000 & 2000 2.980 [75.7] 2.000 [50.8] LIMITATIONS: SENSOR MAY BE USED ON UNITS WITH MAXIMUM ROTATION 3000 & 4000 4.230 [107.4] 3.000 [76.2] UP TO AND INCLUDING 180° 5000 & 6000 4.980 [126.5] 4.000 [101.6] 7000 & 8000 7.980 [202.7] 5.000 [127.0] NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE SET POINT MODULE #9800-01-0x00 .750 3.470 [88.0] .295 [22.0] .490 2.220 [56.5] [7.5] .270 [12.5] .220 .140 [3.5] [7.0] [5.5] .905 [23.0] 4X SET POINT ADJUSTMENT + 18 - 24 VDC -0 VDC TRNS POS TRNS SIG A 2.190 TRNS SIG B [55.6] 3.720 4.000 3.410 OUTPUT A1 [94.5] [101.5] [86.5] OUTPUT A2 OUTPUT B1 OUTPUT B2 + 4,5-24 VDC SOURCE ONLY NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE 4X SET POINT MADE 4X THRU HOLE FOR LED INDICATORS #8 [M4] SCREW ENGINEERING DATA: HALL SENSOR WITH SET POINT MODULE 18-24 VDC MODEL 9800-01-0300 POWER SUPPLY NPN (SINK) WIRING SCHEMATICS INPUT TO PROGRAMMABLE Diagrams are typical for many programmable CONTROLLER COMMON controller interface applications. Modules may 1 BLACK 2 RED also be used to signal TTL. CMOS, relays or solenoids 3 WHITE A 4 within rated electrical specifications. 5 6 7 NOTE: For single applications where four 8 WHITE 9 outputs are desired, install a jumper between B 10 OUTPUTS A1 & A2 terminals 4 & 5. OUTPUTS B1 & B2 18-24 VDC MODEL 9800-01-0400 OPTIONAL - POWER SUPPLY REQUIRED ONLY IF PNP (SOURCE) IF OUTPUT VOLTAGE DESIRED SOURCE REQUIRED IS THE PRIMARY OUTPUT VOLTAGE IS SAME AS THE PRIMARY SUPPLY OTHER THAN THAT SUPPLY ATTACH A INPUT TO OF PRIMARY SUPPLY JUMPER BETWEEN PROGRAMMABLE TERMINALS 1 & 10 CONTROLLER COMMON 1 BLACK 2 RED 3 WHITE A 4 5 6 7 8 9 WHITE B 10 OUTPUTS A1 & A2 OUTPUTS B1 & B2 All dimensions are reference only unless specifically toleranced. 9-33 • PHDV1 www.phdinc.com/products/switchesandsensors (800) 624-8511 BLACK BLACK RED RED SWITCHES BENEFITS & DIMENSIONS: BRACKETS FOR NFPA CYLINDERS BENEFITS ■ Allows PHD Series 1750 Reed and Hall Effect Switches to be mounted to 1-1/2" [38.1 mm] to 8" [203.2 mm] bore NFPA Cylinders. ■ The brackets’ flexible design means only two brackets are required to cover 8 sizes of NFPA Cylinders. ■ The extruded aluminum bracket attaches securely to a single tierod and does not allow the switch to pull away from the cylinder barrel. ■ The low profile of the switch and bracket saves space and provides additional mounting flexibility. ■ Optional strain relief clamp may be used to protect the switch cable from damage at the switch due to flexing. PHD SWITCH MODELS NFPA CYLINDER SWITCH BRACKET STRAIN RELIEF PART NO. DESCRIPTION BORE NUMBER BRACKET 17509-3-06 AC Reed 17502-2-06 DC Reed 1-1/2, 2, 2-1/2, 17000-51-0 18412 17529-3 AC Reed, Quick Connect 3-1/4, & 4 17522-2 DC Reed, Quick Connect 17503-2-06 Hall Effect NPN (Sink) 17504-2-06 Hall Effect PNP (Source) 5, 6, & 8 17000-57-0 18412 17523-2 Hall Effect NPN (Sink), Quick Connect 17524-2 Hall Effect PNP (Source), Quick Connect See pages 9-16 to 9-18 for switch information. NFPA cylinder must have the proper magnetic piston for the PHD Switches to function correctly. 17000-xx-0 NFPA SWITCH BRACKET 1.000 OPTIONAL CABLE LED INDICATOR [25.4] A REF 18412 CABLE RESTRAINT KIT RESTRAINT BRACKET B REF C SQ REF D REF DIA PHD SWITCH MODELS BORE LETTER DIMENSION DESCRIPTION PART NO. SIZE A B C D DC Reed NPN/PNP (White) 17502-2-06 1-1/2 1.375 1.500 2.000 .250 AC Reed (Green) 17509-3-06 2 1.500 1.750 2.500 .312 Solid State NPN (Yellow) 17503-2-06 2-1/2 1.750 1.875 3.000 .312 Solid State PNP (Red) 17504-2-06 3-1/4 2.000 2.187 3.750 .375 4 2.375 2.500 4.500 .375 5 3.000 3.125 5.500 .500 6 3.375 3.375 6.500 .500 8 4.000 4.125 8.500 .625 9-34 All dimensions are reference only unless specifically toleranced. PHDV1 • www.phdinc.com/products/switchesandsensors (800) 624-8511 SWITCHES