® IPnexus CPC4416 PRODUCT SHEET 24-Port 10/100 + Two-Port Gb TX Ethernet Switch FEATURES 24 10/100 + Two 10/100/1000 TX Ethernet Ports ™ ® FlexLink Site (PICMG 2.15 PTMC Type 5-Compliant) Wire-Speed Layer 2 ® Part of our IPnexus portfolio of products, the ports can be connected to one or both Switching/Layer 3 Routing CPC4416 is a robust, flexible, full wire-speed switches. If a link, PHY, or the continuous, Layer 2/3 10/100/1000 Ethernet switch real-time integrity test fails on the switch, data 9 Gbps Switching Speed ® compatible with both standard CompactPCI can be re-routed to an alternate path, thereby ® and PICMG 2.16 backplanes. Featuring 24 maintaining network connections. Support for Both 2.16 and 10/100 + 2 Gb TX ports, it is designed to be Non-2.16 Modes used as a high-speed interconnect between This switch as a very low mean-time-to-repair devices in a PICMG 2.16 chassis or as a core (MTTR). The replacement unit can obtain all Real-Time Continuous Integrity switch in a fault-tolerant cluster of embedded of its operational and configuration Checks for Non-Stop Networking systems. This fourth-generation switch is the information from the other CPC4416 or from market leader in the most complete, capable, an external manager, making change-out of Rapid Spanning Tree, Link and award-winning line of embedded failed modules as easy as sliding one blade Aggregation, VRRP, and Jumbo Ethernet switching products in the industry. out and replacing it with a new one. The Frame Support CPC4416 has no active components on its The CPC4416 has been specifically designed rear panel I/O cards, which ensures that failed Advanced Fast Filter Processor for to make embedded system integration tasks units can be easily replaced without disturbing Wire-Speed Layer 2-7 Packet easier, so projects can get to market sooner. It cables or other blades in the chassis. Classification and Filtering comes with a potent scripting language that can be used to easily change switch The CPC4416 is intended for use in high Prevents Broadcast and Multicast configuration and behavior, attached client availability, fault-tolerant solutions for Storms and Packet Flooding setups, fail-over rules, etc., based on SNMP embedded data communications, wireless, traps, network events, or system IP telephony, broadband access, defense, LUA Scripting Language configuration/topology changes. aerospace, and high availability systems. This switch can be deployed in a fully redundant, non-blocking network that prevents single points of failure from halting network traffic. Devices with dual Ethernet ® IPnexus CPC4416 PRODUCT SHEET Technical Specifications CPC4416 supports the following specifications: • Online, real-time integrity tests for non-stop networking • 24 10/100 + 2 Gb TX uplinks ORDERING • ASCII extraction of current configuration • Wire-speed Layer 2 switching/Layer 3 routing INFORMATION • LED indicators of link, activity, speed, system • 9 Gbps switching fabric status, system fault, and hot-swap • Store and forward frame processing PT-CPC4416-11946 • Multiple configuration, RTM options • Support for 2.16 and non-2.16 modes 24-port 10/100 + 2 Gb TX PICMG 2.16 • Front panel uplink options node slot switch Protocols Supported • Advanced fast filter processor for wire-speed Layer 2-7 packet classification and filtering • GARP, GMRP, GVRP PT-CPC4416-11947 ® 24-port 10/100 + 2 Gb TX PICMG 2.16 • CompactPCI CORE specification • RIP versions 1 and 2 ® fabric slot switch (PICMG 2.0 R3.0) compliant, 6U x 4HP • OSPF, VRRP • Hot-swap support (PICMG 2.1 Hardware • 802.1D Spanning Tree/Rapid Spanning Tree PT-RTM4416-11948 Connection Layer) Protocol with fast port and fast uplink 5-port 10/100 TX + 2 Gb RTM enhancements -made more robust with PT’s exclusive Auto Configuration Replication PT-RTM4416-11951 • System management bus Management 8-port 10/100 + 2 Gb TX RTM (PICMG 2.9/IPMI, v 1.5)-compliant • CLI via RS-232 and out-of-band Ethernet • PICMG 2.16 hot-swap-compliant PT-RTM4411-11952 management port 24-port 10/100 TX single-slot rear • Full duplex 802.3x flow control • Scripting language for value-added applications transition module with breakout box • 8K MAC addresses • Embedded HTTP server for management and cables • 2K Layer 3 IP addresses • Telnet • Managed learning of attached devices on a • SNMP v1, v2c, v3 – RFC 1157 PT-RTM4416-11953 per-port basis 24 10/100 + 2 10/100/1000 TX single- • MIBs • Jumbo packet (9 KB) Layer 2 switching for slot rear transition module with breakout - MIBII – RFC 1213, MIBII bridge – RFC 1493 iSCSI applications box and cables - RMON MIB – RFC 1757 groups 1, 2, 3 and 9 • Tagged packet (802.3ac) and Jumbo packet - EtherLike MIB – RFC 1643 PT-RTM4416-11954 (9 KB) support - IEEE 802.1q MIB – RFC 2674 24-port 10/100 TX RTM • Support for IEEE 802.1p class of service with - IEEE 802.3AD link aggregation MIB eight priority queues for traffic class - PT enterprise MIB PT-RTM4416-11955 management 24 10/100 + 2 10/100/1000 TX dual- • IEEE 802.1Q VLAN support (16 VLANs) Certifications slot rear transition module • 802.3-2000 link aggregation, up to 12 link • UL/EN 60950 groups, eight ports per group PT-FlexConnect-11956 • CE • Broadcast storm detection and suppression PTMC option board that brings two • FCC Class A • Multi-port mirroring 10/100 and two 10/100/1000 TX ports • ETSI EN 300 386 to the front panel • Front panel, non-switched 10/100 Ethernet • Designed to the requirements of NEBS Level 3 port for out-of-band management • Fully compliant with RoHS and WEE requirements For more information visit www.pt.com • Front or rear panel console port (RS-232) or call your local representative. • Switched PICMG 2.16 fabric-to-fabric MTBF interconnect, auto-negotiating • 184,146 hours per Bellcore SR-332, Issue 1 • TFTP/FTP-based firmware upgrade and configuration upload/download • TFTP/FTP client/server Power Requirements • BootP/DHCP client/server with support for • 19 W typical, 26 W maximum port-based leasing • DHCP/BootP relay Environmental • Flash file system enables other blades to load • Operating: 0° to 55°C (32° to 131°F) specific configuration information on a • Non-operating: -40° to 80°C (-40° to 176°F) CONTACT US slot-by-slot basis • Relative Humidity: 10 to 90%, non-condensing • Partner switch configuration replication www.pt.com • Power-on or manager (CLI or SNMP) invoked E-mail: sales@pt.com diagnostics © 2012 Performance Technologies, Inc. All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries. DS/0510