CPC7301 PRODUCT SHEET Intelligent Shelf Manager FEATURES Delivers High Availability • Manages all IPMI-based components in platform • Active/standby dual ISM redundancy and synchronization • Star topology provides enhanced reliability • Out-of-band management Advanced, intelligent shelf management components in the chassis. When thresholds, with dedicated Ethernet ensures maximum service availability in a such as temperature and voltage, are crossed interface computing platform by monitoring sensors or a failure occurs, the ISM captures these • Hot-swap support for field and predicting failures. The CPC7301 events, stores them in an event log, sends replaceable components Intelligent Shelf Manager offers a SNMP traps, and drives the telecom alarm comprehensive management architecture that relays and alarm LEDs. User-defined scripts System-Level Compatibility delivers high availability protection with and applications allow OEMs to extend • Compatible with packet- reliable, redundant, and Intelligent Platform functionality directly into the ISM. The ISM based, IPMI-compliant Management Interface (IPMI) standards- can query FRU information (such as serial products based management to all the major number, model number, manufacture date, ® ® • PICMG 2.1, PICMG 2.9, components in the shelf. etc.), detect presence of components (such as ® and PICMG 2.16 compatible fan tray, CPU board, etc.) and perform health The CPC7301 is a 3U, single-slot, Intelligent monitoring of each component. In addition, Comprehensive Software Shelf Manager (ISM) card for PT’s platforms. the ISM controls the user-defined power-up Interfaces It provides centralized management and sequencing of each slot via radial BD_SEL# • SNMP, IPMI, RMCP, Telnet, alarming for system power supplies, fan trays, signals. and SSH support fabric slots, and node slots, including single • Command Line Interface (CLI) board computers and I/O cards. The ISM may Star Topology • Web-based graphic user be paired with a redundant, standby ISM for interface use in high availability applications. A In conjunction with PT’s AMP platforms, the dedicated ISM-to-ISM link allows redundant CPC7301 provides a point-to-point IPMI Comprehensive Hardware ISMs to synchronize management data and connection from the ISM to each individual Interfaces polling for failover. The ISM provides node or fabric slot, to the power supply • Out-of-band Ethernet port comprehensive user and software interfaces subsections, and to the fan tray section in the • Dedicated serial port via Simple Network Management Protocol chassis, much like an Ethernet switch in a star • µDB15 telecom alarm interface (SNMP), Application Programming Interface topology. with dry contact relays for (API), Command Line Interface (CLI), Remote critical, major, minor, and Management Control Protocol (RMCP), and a The ISM acts as the primary Baseboard power fail Web interface. The single slot, 6U, RTM4820 Management Controller (BMC) for the entire • Alarm cutoff pushbutton Rear Transition Module (RTM) provides rear chassis, eliminating any cross traffic between • Critical, major, minor, and panel access to the I/O functions of two two points of the star. hot-swap LEDs redundant CPC7301A ISMs. As part of the Advanced Managed Platform offering, the CPC7301 provides hot-swap slot control and monitoring of IPMI-based CPC7301 PRODUCT SHEET This protected architecture has two major benefits: High Availability The Intelligent Shelf Manager provides the ability to operate in High Reliability redundant mode, where one ISM is active and the other is in If any IPMI-based component or subsystem fails and renders its standby mode. In the event of a failure on the active ISM, the bus inoperable, the ISM isolates it from the rest of the IPMI standby ISM takes over control of the chassis. A dedicated framework. watchdog timer on each ISM monitors the software. In the event of a software failure on the active ISM, the watchdog will initiate High Security failover to the standby ISM and reset the unstable ISM. The The ISM allows multiple single board computers with BMCs to configuration information, event log, and other state information coexist in the same chassis but not compete as the primary of the active ISM is continuously synchronized with the standby management controller. ISM. This synchronization can be performed via Ethernet switches that are in or out of the platform, via an Ethernet cable Comprehensive Management at the front or rear panel, or via a dedicated, internal ISM-to-ISM Ethernet link that eliminates dependence on Ethernet switches The ISM manages up to 21 slots, which may be any combination and external cabling. of node slots and fabric switch slots. In addition, it manages up to eight power supplies, up to four fan trays, and up to two ISMs The firmware on the ISMs can be updated remotely via the (itself and the standby ISM). It can also access chassis sensors network in a secure, fail-safe operation. This can be sequenced and a comprehensive list of management information and so that one ISM is active while the other is being updated. configuration options provided by the switched fabric components. The ISMs are hot-swap-capable for “non-stop” service. Intelligent, hot-swappable system managers both reduce Mean Time to Repair (MTTR) and improve system availability. Chassis FRU Sensors Data Slot 1 Monitors Slot 2 Backplane Voltages 3.3 V, 5 V, +12 V, -12 V IPMB and Slot Control Intelligent Intelligent Three Shelf Slot 21 Shelf Ethernet Manager Manager Ports Fan Trays Power Supplies Direct Logic IPMB/Two-Wire Serial Bus FRU FRU Name Name S/N S/N CPC7301 Intelligent Shelf Manager Front Panel Input/Output Warranty The Intelligent Shelf Manager’s front panel supports the One year. following I/O (see the RTM4820 datasheet for details on the Input/Output features for the ISM Rear Transition Module): • Out-of-band 10/100 Ethernet port provides access to SNMP, the Command Line Interface (via Telnet or SHH), RMCP, FTP, and the Web interface. It is also used for sending network alerts. • In-band 10/100 Ethernet port via packet-switched backplane is also supported. • Green link LED and amber activity LED. • µDB15-pin telecom alarm interface – Dry contact relays indicate critical, major, and minor events and generate a continuous output until the alarm cut-off button is pressed or it is turned off via software. – Dry contact relay indicates power fail. – Two optically isolated inputs allow clearing of major and minor alarms. – The relays and inputs are abstracted for future user-defined options. • RJ-45 COM port provides access to the Command Line Interface. • Minor, major, and critical LEDs, plus three independent LEDs • Hot-swap LED indicates when the part is ready to be hot- removed. • Status LED indicates active/fault status. CPC7301 PRODUCT SHEET Technical Specifications CPC7301 supports the following specifications: • PCB Dimensions: 100 mm x 160 mm x 1.6 mm ® ® (3.94 in. x 6.3 in. x 0.063 in.) • PICMG 2.0 R3.0 (CompactPCI ) and ORDERING PICMG 2.1 R2.0 (Hot-Swap) Specifications • Board Dimensions: 3U x 4HP (one slot) INFORMATION • PICMG 2.9 (CompactPCI System Weight: 0.218 kg (7.7 oz) Management) • IPMI v1.5 Intelligent Platform Management PT-CPC7301-11972 Regulatory Compliance Interface specification Intelligent Shelf Mangaer (ISM) • Compatible with PICMG 2.16 Safety (Packet-Switched Backplane) • UL/cUL 60950 Safety for Information PT-RTM4820-11973 • Designed for NEBS level 3 and ETSI • UL File Number E179737 Rear Transition Module (RTM) for ISM installations • IEC 60950 Safety for Information Technology Equipment PT-ACC7340-12077 Power Requirements • CB Certificate and Report Console Cable Adapter Bundle • Supply voltage, Vcc: 5 V ± 5%, with 50 mV • CE Certificate (RJ-45 to DB9) maximum ripple Emissions Tests Regulations Environmental • FCC, Class B • Storage temperature: -40° to 85°C (-40° to • EN 55022/CISPR22 Class B Radiated and For more information visit www.pt.com 185°F) Conducted Emissions Tests or call your local representative. • Operating temperature: 5° to 55°C (41° to • EN 55025/CISPER 24 131°F) • EN-61000-3-2 Power Line Harmonic Emissions • Non-condensing relative humidity: <95% at • EN-61000-3-3 Power Line Fluctuation and Flicker 40°C (104°F) • EN-61000-4-2 Electro-Static Discharge (ESD) • EN-61000-4-3 Radiated Susceptibility Operating Temperature • EN-61000-4-4 Electrical Fast Transient Burst • EN-61000-4-5 Power Line Surge • The CPC7301 can operate between 5° and • EN-61000-4-6 Frequency Magnetic Fields approximately 55°C ambient, with a minimum • EN-61000-4-11 Voltage Dips, Variation, and of 200 LFM (1 meter/sec) of external airflow. Short Interruptions External airflow must be provided to the CPC7301 at all times. Network Equipment-Building System – (NEBS) Requirements Operating System ® ® • GR-1089-CORE NexusWare , CGL-registered Linux - Sect. 2 Electrical Discharge - Sect. 3.2.2 Radiated RF Emissions I/O Interface Connector Type - Sect. 3.2.3 AC Line Conducted Emissions-Voltage RS-232 Serial Port RJ-45 - Sect. 3.2.4 AC and DC Line Conducted 10/100 Ethernet Port RJ-45 Emissions-Current Telecom Alarm Port Micro-DB-15 - Sect. 3.3.1 RF Radiated Fields - Sect. 3.3.3 RF Common Mode Telecom Alarm Signal • GR-63-CORE Alarm Relays -Sect. 5.1.1.1 Low-Temperature Exposure, and Thermal Shock • The CPC7301’s alarm relay circuits are capable -Sect. 5.1.1.2 High-Temperature Exposure, and of carrying 60 V DC or 1 A with a maximum Thermal Shock rating of 30 VA. -Sect. 5.1.1.3 High Relative Humidity Exposure Opto Inputs -Sect. 5.3.1 Handling Drop Tests-Packaged • The CPC7301 accepts timed pulse inputs for Equipment clearing minor and major alarm states. (There -Sect. 5.3.2 Unpackaged Equipment Drop Tests is no reset for the critical state.) Reset is -Sect. 5.4.1 Earthquake Tests accomplished by asserting a voltage differential -Sect. 5.4.2 Office Vibration Test Procedure from 3.3 V to 48 V for between 200 and -Sect. 5.4.3 Transportation Vibration-Packaged CONTACT US 300 ms. The acceptable voltage range is from Equipment 0 to 48 V DC continuous. The current drawn -Sect. 5.6 Acoustic Noise TestCompactPCI core www.pt.com by a reset input does not exceed 12 mA. specifications E-mail: sales@pt.com Mechanical MTBF In a compatible enclosure, the CPC7301 occupies a • 178,868 hours Bellcore SR-332 Issue 1 single 3U ISM slot. Dimensions are below: © 2012 Performance Technologies, Inc. All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries. PS/1210