® IPnexus CPC4411 PRODUCT SHEET 24-Port 10/100 + 2-Port Fiber Gb Ethernet Switch FEATURES 24 10/100 + Two Fiber Gb Ethernet Ports Wire-Speed Layer 2 Switching/ Layer 3 Routing ® Part of our IPnexus portfolio of products, the The CPC4411 comes with real-time 9 Gbps Switching Speed CPC4411 is the fourth-generation 10/100 diagnostics that can be configured to embedded Ethernet switch from PT, the continuously check the health of the switch. Support for Both 2.16 and Non- market leader in embedded switching. If a problem is detected, data can be auto- ® 2.16 Modes Compatible with both standard Compact PCI matically rerouted to an alternate path and an ® and PICMG 2.16 backplanes, it features error message sent to the system or network Real-Time Continuous Integrity field-hardened software that has been manager. Checks optimized for use as a high-speed interconnect within a server blade chassis or as the core System MTTR is exceedingly low with dual Rapid Spanning Tree, Link switch in a fault-tolerant cluster of embedded switches in place. If one switch fails, the Aggregation, VRRP, and Jumbo systems. replacement unit can be configured to obtain Frame Support all of its operational and configuration The CPC4411 is fully compatible with all information from the partner switch or from Advanced Fast Filter Processor for RoHS and WEEE requirements and offers an external manager, making change-out of Wire-Speed Layer 2-7 Packet the increased bandwidth, performance, failed modules as simple as a hot-swap. The Classification and Filtering and reliability required by high availability new unit simply “clones” its setup from the applications, which makes it ideal for use in configuration stored on the surviving switch. Prevents Broadcast and Multicast defense, IP telephony, and communications. With no active components on its rear panel ® Storms, Packet Flooding When installed in a PICMG 2.16 or VITA I/O cards, failed units can easily be replaced 31.1 environment, designers can realize without disturbing cables or other blades in LUA Scripting Language performance gains of up to nine times that the chassis. of current PCI-based architectures. The CPC4411 also protects investments for The CPC4411 has been designed to make the long term with easy FTP/TFTP updates to system integration easier, while maximizing platform flash memory. System software is network performance and flexibility. It available through downloads from the web features a potent scripting language that can site (www.pt.com), which greatly simplifies or be used to simplify and automate installation eliminates the need for dedicated on-site and maintenance tasks. It also supports network administration. multiple switching topologies (single star, dual star, and hub and spoke). In redundant applications, it can provide devices that have dual Ethernet ports with alternate data paths in the event of a node or switch failure. ® IPnexus CPC4411 PRODUCT SHEET Technical Specifications CPC4411 supports the following specifications: • Online, real-time integrity tests for non-stop networking • 24 10/100 + 2 Gb SX fiber uplinks ORDERING • ASCII extraction of current configuration • Wire-speed Layer 2 switching/Layer 3 routing • LED indicators of link, activity, speed, system INFORMATION • 9 Gbps switching fabric status, system fault, and hot-swap • Store and forward frame processing • Multiple configuration, RTM options • Support for 2.16 and non-2.16 modes PT-CPC4411-12078 • Front panel uplinks CPC4411 24-port 10/100 + 2 Gb SX • Advanced fast filter processor for wire-speed Protocols Supported PICMG 2.16 Ethernet switch Layer 2-7 packet classification and filtering • GARP, GMRP, GVRP ® • CompactPCI CORE specification • RIP versions 1 and 2 ® (PICMG 2.0 R3.0) PT-RTM4411-11949 • OSPF, VRRP - compliant, 6U x 4HP 5-port 10/100 TX single-slot rear • 802.1D-2004 Spanning Tree/Rapid Spanning • Hot-swap support (PICMG 2.1 Hardware Tree transition module Connection Layer), made more robust with PT’s exclusive Auto Configuration Replication Management PT-CPC4411-12079 • System management bus (PICMG 2.9/IPMI, • CLI via RS-232 and out-of-band Ethernet v1.5) compliant CPC4411 24-port 10/100 + 2 Gb SX management port • PICMG 2.16 hot-swap-compliant Ethernet switch for non 2.16 applications • Scripting language for value-added applications • Full duplex 802.3x flow control • Embedded HTTP server for management • 8K MAC addresses PT-RTM4416-11952 • Telnet • 2K Layer 3 IP addresses • SNMP v1, v2c, v3 - RFC 1157 24-port 10/100 TX single-slot rear transi- • Managed learning of attached devices on a • MIBs per port basis tion module with breakout box and - MIBII – RFC 1213, MIBII bridge – RFC 1493 • Jumbo packet (9KB) Layer2 switching for cables - RMON MIB – RFC 1757 groups 1, 2, 3 and 9 iSCSI applications - EtherLike MIB – RFC 1643 • Tagged packet (802.3ac) support PT-RTM4416-11954 - IEEE 802.1q MIB – RFC 2674 • Support for IEEE 802.1p class of service - IEEE 802.3AD Link Aggregation MIB 24-port 10/100 TX dual-slot rear transi- with eight priority queues for traffic class - PT enterprise MIB management tion module • IEEE 802.1Q VLAN support (16 VLANs) • 802.3-2000 link aggregation, up to 12 link Certifications For more information visit www.pt.com groups, eight ports per group or call your local representative. • UL/EN 60950 • Broadcast storm detection and suppression • CE • Multi-port mirroring • FCC Class A • Front panel, non-switched 10/100 Ethernet port • ETSI EN 300 386 for out-of-band management • Designed to the requirements of NEBS Level 3 • Front or rear panel console port (RS-232) • Fully complies with the requirement of RoHS • Switched PICMG 2.16 fabric-to-fabric and WEEE interconnect, auto-negotiating • TFTP/FTP-based firmware upgrade and Power Requirements configuration upload/download • TFTP/FTP client/server • 22 W typical, 29 W maximum • BootP/DHCP client/server with support for port-based leasing Environmental • DHCP/BootP relay • Operating: 0 to 55°C (32 to 131°F) • 2 MB user flash file system enables other • Non-operating: -40 to 80°C (-40 to 176°F) systems to load specific configuration • Relative Humidity: 10 to 90%, non-condensing information on a slot-by-slot basis • Partner switch configuration replication, MTBF cloning, version matching • Power-on or manager (CLI or SNMP) invoked • 128,024 hours per Bellcore SR-332, Issue 4 diagnostics CONTACT US www.pt.com E-mail: sales@pt.com © 2012 Performance Technologies, Inc. All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries. DS/0410