® IPnexus CPC6620 PRODUCT SHEET ® 24 1Gb & Two 10Gb CompactPCI Ethernet Switch FEATURES 24 10/100/1000 Base-T + Two 10 Gb CX-4 Ethernet Ports Wire-Speed, Non-Blocking IPv4/IPv6 Switching and Routing ® Part of our IPnexus portfolio of products, the 96 Gbps Switching Speed ® CPC6620 is the most advanced PICMG 2.16 The CPC6620 has been designed specifically embedded Ethernet switch on the market. to make system integration and maintenance Support for both 2.16 Fabric and Featuring support for IPv6 routing and 10 Gb easier, while maximizing network performance Non-2.16 Modes switch ports, it is the latest addition to PT’s and flexibility. Its potent scripting language line of award-winning switches. It also simplifies and automates installation and Front or Rear Panel Uplinks continues the long tradition of offering high update functions. With dual switches in place, availability, fault-tolerant solutions to the the alternate unit can obtain all of its Real-Time Continuous Integrity telecom, aerospace and defense, and operational and configuration information Checks for Non-Stop Networking commercial markets. It is the ideal from the other switch or from an external interconnect and uplink for today’s network- manager, making change-out of failed Rapid Spanning Tree, Link centric, packet-based embedded systems. modules as simple as replacing the failed Aggregation, VRRP, and Jumbo While overall switch throughput is board. The new unit then “clones” its setup Frame Support approximately twice that of prior generation from the configuration stored on the surviving gigabit switches, users retain the inherent switch. Advanced Fast Filter Processor for robustness, reliability, and hot-swap Wire Speed Layer 2-7 Packet capabilities of the 2.16 standard invented by The CPC6620 features an 800 MHz processor, Classification and Filtering PT. ECC-protected memory, an optional ® CompactFlash site, front panel SFP connector LUA Script Language The CPC6620 features the bandwidth needed options for optical uplinks, and a large number for demanding applications as well as the of management, rear panel I/O, and uplink resilience required in high availability choices. Each port can sustain full wire-speed, applications such as airborne or ship-borne non-blocking data flows on all ports with its communications systems, media and signaling 96 Gbps switching fabric, which eliminates gateways, IP media equipment, telecom congestion in even the busiest environments. switching/routing infrastructure, and SS7 network elements. To ensure system reliability, This leading-edge product protects the CPC6620 can be configured to monitor investments for the long term with easy network status and to continuously check its FTP/TFTP updates to platform flash memory. own health through real-time integrity System software is available through tests. In the event of system or network downloads from PT’s web site (www.pt.com), failure, data can be automatically re-routed to greatly simplifying or eliminating the need for an alternate path. dedicated, on-site network administration. ® IPnexus CPC6620 PRODUCT SHEET Technical Specifications CPC6620 supports the following specifications: MTBF • 105,532 hours per Bellcore TRT SY-332 • 24 10/100/1000 Base-T ports + two 10 Gb ORDERING Method 1 CX-4 ports ® INFORMATION • PICMG 2.16 compliant Management • Wire speed Layer 2/Layer 3 IPv4/IPv6 routing • CLI via RS-232 and out-of-band Ethernet PT-CPC6620-12163 • Online, real-time integrity tests for non-stop management port 24 port 1 Gb TX (rear) + two 10 Gb CX-4 networking • Scripting language for value-added applications • Single, non-blocking 96 Gbps switching fabric PT-CPC6621-12164 • Telnet • Store and forward frame processing 20 port 1 Gb TX (rear) + four port 1 Gb • SSH v2 TX (front panel) + two 10 Gb CX-4 • Front or rear panel uplinks • SNMP v1, v2c, v3 – RFC 1157 • Advanced fast filter processor for wire speed • MIBs PT-CPC6622-12165 Layer 2-7 packet classification and filtering 20 port 1 Gb TX (rear) + four SFP 1 Gb - MIBII – RFC 1213, MIBII bridge – RFC 4188 • Auto configuration replication (front panel) + two 10 Gb CX-4 (does - TRMON MIB – RFC 2819 groups 1-3 and 9 • Full duplex 802.3x flow control not include SFP modules) - EtherLike MIB – RFC 3635 • 16K MAC addresses - VRRP MIB RFC 2787 PT-RTM6600-11899 • 8K IPv4 / 4K IPv6 Layer 3 IP addresses - IEEE 802.1q MIB – RFC 2674 5 Port 10/100/1000 RTM - IEEE 802.3AD link aggregation MIB • Managed learning of attached devices on a - PT enterprise MIB per-port basis for advanced security PT-RTM6600-11900 • Tagged packet (802.3ac) and jumbo packet 10 Port 10/100/1000 TX RTM Agency Certifications (Pending) (9 kB) support • FCC Class A • Support for IEEE 802.1p class of service with PT-RTM6600-11898 • CE eight priority queues for traffic class management 24 Port 10/100/1000 TX RTM, Dual Slot • UL 60950/EN 60950 (non-2.16) • IEEE 802.1Q VLAN support (16 VLANs) • ETSI EN 300 386 • 802.3-2000 link aggregation, up to 128 trunk PT-IPv6RTU-12334 • Designed to meet NEBS requirements Level 3 groups, eight ports per group IPv6 Router Software and Right to Use • RoHS and WEEE Compliant • Broadcast storm detection and suppression License • Multi-port mirroring Power PT-SSWMANP-11818 • Front panel, non-switched 10/100 Ethernet • 54 W maximum; 37 W typical Annual Ethernet Switch Software port for out-of-band management Maintenance Package • Front and rear panel console port (RS-232) Dimensions • TFTP/FTP-based firmware upgrade and ® PT-ACC6622-12266 • Single width CompactPCI form factor, configuration upload/download 10/100/1000 Base-T SFP Transceiver 6U x 160 mm (6.3 in.) • TFTP/FTP client/server • Weight: 548 gm (1 lb, 3.3 oz) • BootP/DHCP client/server with support for PT-ACC6622-12267 port-based leasing 1000 Base-X Multimode SFPOptical Environmental Transceiver (850 nm) LC Connector • 800 MHz CPU with both L1 and L2 cache • Operating: 0o to 50ºC (32º to 122ºF) • 26 MB flash file system that enables other • Non-operating: -40º to 80ºC (-40º to 176ºF) PT-ACC6622-12268 systems to load specific configuration • Humidity: 5 to 90% RH non-condensing 1000 Base-X Single Mode Optical SFP information on a slot-by-slot basis Transceiver (1300 nm) LC Connector ® • Optional CompactFlash slot for preloaded Physical Interfaces - Front Panel configuration information For more information visit www.pt.com • Connectors for: switch console port, switch • DHCP/BootP relay or call your local representative. out-of-band management • Partner switch configuration replication, cloning, • Switch LEDs: system health, power, fault, hot- and version matching swap, link/activity and speed per 1 Gb port, • Power-on or manager (CLI or SNMP) invoked link/activity per 10 Gb port diagnostics • System reset: One recessed micro-switch • ASCII extraction of current configuration • Four optional RJ-45 or SFP sockets • LED indicators of link, activity, speed, system CONTACT US status, system fault, and hot-swap Optional Rear Transition Modules • Connectors for: console port, out-of-band www.pt.com Protocols Supported management port E-mail: sales@pt.com • RIP versions 1 and 2 • Up to ten 10/100/1000 TX RJ-45 uplinks in • 802.1D Spanning Tree/Rapid Spanning Tree a single slot © 2012 Performance Technologies, Inc. All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries. DS/0510