CPC5910 PRODUCT SHEET High-Performance SATA Storage Expansion Blade FEATURES High Density 6U x 2-Slot Storage Expansion Blade ® ® CompactPCI and PICMG 2.16 Compatible 4 TB Storage Board-Level and Disk-Level The CPC5910 is a high-performance, high- Storage Capacity Hot-Swap availability SATA expansion blade that The CPC5910 storage blade features two supports 4 TB of storage. Each blade features Headless Operation for Drive Enterprise-class 3.5-in. SATA hard drives. As two 3.5-in. Enterprise-class SATA hard drives Removal and Insertion storage manufacturers increase hard drive with both board-level and drive-level hot- capacity, Performance Technologies will swap for complete flexibility and high Two SATA Channels Routed to accommodate these new drives. Currently, reliability. The CPC5910 can be connected to the Mid-Plane the CPC5910 includes two 2 TB 3.5-in. the high-performance CPC5565 64-bit Enterprise-class SATA hard drives. The Single Board Computer (SBC) to provide Dual Enterprise-Class 3.5-in. CPC5910 provides up to 4 TB of storage additional storage capacity or to off-load the SATA Hard Disk Drives when configured as a RAID 0 array or used locally attached single hard drive on the SBC, as stand-alone drives and 2 TB when which provides more reliability, higher PICMG 2.9 Compatible with mirrored as a RAID 1 array. capacity, and higher performance. Onboard IPMC Connectivity to the SATA interface is Cost Control achieved by employing a RTM4811 Rear Transition Module with an external Multi- Connecting to external network attached channel SATA cable. Drive and blade storage can be expensive. It typically monitoring is possible with a serial requires separate chassis, sparing, cabling, connection from the host blade to the front power delivery, and management tools. or rear panel of the CPC5910. The Integrated storage is easily added to any ® CPC5910 also supports IPMI-based existing PICMG 2.16 architecture. Discrete management with the onboard IPMC system hard drives and external storage controller. devices can be consolidated inside a single chassis. Sparing, hot-swapping, and With the flexibility to configure the hard infrastructure configuration are greatly drives as needed inside the platform, the simplified. In short, total cost of ownership CPC5910 lowers the overhead costs for storage is reduced. associated with dedicated storage platforms and simplifies infrastructure configuration. CPC5910 PRODUCT SHEET High-Performance SATA Storage Expansion Blade Headless Operation ORDERING INFORMATION While some storage solutions require console access to remove PT-CPC5910-12278 or add a hard drive, the CPC5910 SATA Storage Expansion Blade with two 2 TB hot-swappable SATA drivers. features “Automated Drive Requires CPC5565 host board and Management,” (ADM), which does RTM4811 near transition modules not require logging into the system. with cable. Automated Drive Management allows safe extraction of drives Accessories without data corruption by PT-ACC5970-12279 deactivating drives prior to drive 2 TB SATA Drive Module/FRU removal. An LED on the front panel PT-RTM4811 indicates when the drive is ready Rear Transition Module for removal. Automated Drive Management automatically detects, PT-ACC324-11977 configures, and remounts a newly Console Port Cable inserted drive into the RAID array PT-ACC102-12479 or file system. There are multiple 1 meter Mini-SAS to Mini-SAS cable. LED indicators for each drive to communicate drive status to the For more information visit www.pt.com user. The ADM system is completely or call your local representative. user configurable to customize the actions performed on drive extraction, insertion events, and the behavior of the LED indicators on the front panel. Technical Specifications The CPC5910 is compliant with the following Dimensions specifications: • Dual width CompactPCI form factor, 6U x 4HP, 233 mm x 160 mm (9.17 in. x 6.3 in.) ® ® • PICMG 2.0 R3.0 (CompactPCI ) and • PICMG 2.1 R2.0 (Hot-Swap) Specifications Power Requirements • PICMG 2.16 (Packet Switched Backplane) • With hard disk: 20 W typical, 35 W maximum and 2.9 (CompactPCI System Management) • Designed for NEBS level-3 and ETSI Agency Certifications installations • FCC Class A • Standard IPMI 1.5 specification • CE • UL 60950 Environmental • EN 60950 • Required airflow: 250 linear feet per minute • ETSI EN 300 386 (LFM) • Designed to meet the requirements of NEBS • Operating temperature: 5 to 50ºC Level 3 CONTACT US (41 to 122ºF) • Storage temperature: -40 to 85ºC www.pt.com MTBF (-40 to 185ºF) E-mail: sales@pt.com • 391,931 per Bellcore SR-332 • Non-condensing relative humidity: less than 95% at 40ºC (104ºF) © 2012 Performance Technologies, Inc. All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries. DS/0510