CPC358 Eight-Port WAN Communications Adapter Highlights >> Multipurpose Intelligent Sub-System Communications for 6U CompactPCI® Systems >> Eight Fully Programmable High Speed Channels The CPC358 is an eight-port serial communications processor designed to operate in either CompactPCI® systems as a peripheral or in a PICMG® 2.16 chassis as a stand-alone communi- >> Supports Standard PCI Bus cations system. It provides OEMs, integrators and end users with a high performance platform and PICMG® 2.16 for use in server farms or datacom/telecom applications. ™ Featuring the Motorola MPC8255 PowerQUICC II processor running at 233MHz, the CPC358 >> 128MB of Shared DRAM can independently process protocols such as X.25, Frame Relay, LAPD and Radar Receiver in an Memory Internet/WAN environment. In telecom applications, the CPC358 will also support MTP-2 on all eight links. >> Motorola MPC8255 PowerQUICC II™ processor The CPC358 supports either front or rear panel I/O and hot-swap (PICMG 2.1) and SMB/IPMI (PICMG 2.9) standards. >> Fully Programmable to Support V.35, RS-530, RS-449, RS-422 Hardware Features and RS-232 The CPC358 is designed as a fully programmable and independent communications sub-system capable of sustaining high data rates for a variety of protocols used in synchronous communications. >> NexusWare® WAN Protocol Software: • Radar Receiver The CPC358 uses the Motorola MPC8255 PowerQUICC II communications microprocessor • Tadil B running at 233MHz. One of the processors is configured as the Master and the other is configured • HDLC as the Slave. The default mode of operation uses the Slave processor with its CPU core disabled, • X.25 leaving the CPM active for serial communication. • Frame Relay Specifically designed for use in a PICMG 2.16 environment (or a PCI-based chassis), two independent MAC/PHYs are offered to provide Ethernet redundancy in a 2.16 node slot. The >> Broad OS System Support: CPC358 will automatically switch over to the secondary Ethernet MAC/PHY if link is lost on the Solaris, Windows® and primary MAC/PHY or the primary fabric fails. The CPC358 supports mid-plane Ethernet wiring, Linux® allowing for the cable-free interconnect between the CPC358 and other CompactPCI-based Ethernet components such as our embedded Ethernet switches. Optionally the two Ethernet >> Front or Rear Panel I/O ports can be brought out to the RTM when PICMG 2.16 is not used. Options The CPC358 supports eight identical, individually programmable, synchronous/serial I/O ports. The ports are capable of electrically interfacing to V.35, RS-530, RS-449, RS-422 and RS-232 >> Hot-Swap Support equipment. Each port is brought out in groups of four to an 80-pin connector that supports Performance Technologies’ quad connection Hydra line of serial I/O cables. CPC358 Eight-Port WAN Communications Adapter Ordering Information Extensive Software Support >> PT-CPC358-11932 The NexusWare® software suite offers a CGL-Registered and POSIX-compliant Linux operating 8-port Sync/Serial Controller, system and development environment. In addition, the suite includes an extensive list of Rear I/O installable protocols that can be leveraged to build robust solutions such as media gateways, >> PT-CPC358-11933 lawful intercept platforms, SS7 monitoring equipment for line usage/billing applications, radar 8 port Sync/Serial Controller, gateways, and converged serial gateways. Front I/O >> PT-RTM358-11934 The NexusWare family of products includes: RTM for PT-CPC358-11932 >> PT-RTM358-11970 NexusWare Core: At the very center of our NexusWare suite of software is NexusWare Core RTM for PT-CPC358-11933 which provides a comprehensive, highly integrated, Linux OS, development, integration and management environment. It is intended for system engineers using Performance Cable Options Technologies' embedded products to build packet-based systems including next-generation wireless and IP-based systems. >> PT-ACC334-11918 4 x V.35 Hydra Cable, DTE with NexusWare C7: Comprehensive SS7 MTP-2 installable software package for NexusWare Thumbscrews Core. NexusWare C7 provides equipment manufacturers and application developers using >> PT-ACC334-11919 Performance Technologies' embedded products with a foundation for building SS7 4 x RS232 Hydra Cable, DTE with Jackscrews applications, including next-generation wireless and IP telephony systems. >> PT-ACC334-12274 NexusWare WAN: Extensive offering of protocol packages including, but not limited to, 4 x RS232 Hydra Cable, DTE with Thumbscrews HDLC, X.25, Frame Relay, and Radar Receiver which combined with Performance Technologies embedded products enhance your ability to create flexible and efficient >> PT-ACC334-11969 4 x EIA530 Hydra Cable, DTE radar gateways, converged serial gateways and front-end I/O systems. with Jackscrews >> PT-ACC334-12273 4 x EIA530 Hydra Cable, DTE with Thumbscrews >> PT-ACC334-11920 4 x RS449 Hydra Cable (Socket) Sun Substitute, DTE with Jackscrews >> PT-ACC334-11921 4 x RS449 Hydra Cable (Pin), DTE with Jackscrews >> PT-ACC358-11971 4 x V.35 Hydra Cable, DCE with Thumbscrews >> PT-ACC358-12275 RS232 Debug Cable (console) Software options are shown on the following page. CPC358 Eight-Port WAN Communications Adapter Specifications Ordering Information Performance Specification Compliance Software Options • • Eight Ports @ 2 Mbps bi-directional, PCI local bus specification, revision 2.2, including all >> PT-NXSWARE-11359 simultaneously. PCI required configuration registers and protocols NexusWare® Linux-based • PICMG® 2.1 hot-swap Software Processors • PICMG® 2.16 CompactPCI packet switching • 233 MHz Motorola MPC8255 >> PT-HDLCKIT-11490 backplane HDLC Connectivity Kit PowerQUICC II™ processor • PICMG® 2.9 system management bus (SMB/IPMI) >> PT-FRAMKIT-11661 Memory Frame Relay Development Kit • 128MB shared DRAM Agency Certifications • 32MB Application Flash >> PT-X25KIT-11612 • FCC Class A X.25 Development Kit • CE Bus Structure • UL 1950 >> PT-ASYNKIT-11702 • CompactPCI® 2.0, revision 3.0-compliant, • NEBS Level 3-friendly Async Development Kit including all PCI required configuration registers and protocols >> PT-RADKIT-11705 MTBF Radar Receiver Development Kit • > 116,788 Hrs per Physical Interface >> PT-TADKIT-11893 • V.35 Power TADIL-B Development Kit • RS-530 • 21.8W maximum (preliminary calculations): • RS-449 >> For additional information on 5.8 A @ +3.3 V software options, visit us at: • RS-422 0.5 A @ +5 V www.pt.com • < 10 mA @ +12 V RS-232 < 10 mA @ +-12 V Modem Control Dimensions • CTS • 6U Eurocard form factor • DSR • DTR Temperature • DCD • Operating: 0° to 50°C (32° to 122°F) • RTS (also RI, LT for V.35) • Non-operating: -20° to 80°C (-4° to 176°F) Protocol Support • HDLC • Frame Relay • LAPD • X.25 • TADIL-B • Radar Receiver Compliance • All currently applicable ANSI/ISO standards Contact Information Performance Technologies 205 Indigo Creek Drive Rochester, NY 14626 Tel: 585.256.0200 Fax: 585.256.0791 E-mail: sales@pt.com www.pt.com © 2008 Performance Technologies. All rights reserved. Specifications subject to change without notice. The names of actual companies, products, or services may be the trademarks, registered trademarks, or service marks of their respective owners in the United States and other countries. DS/0308