control site PRODUCT SPECIFICATION CM9760 Series Matrix MICROPROCESSOR-BASED SWITCHER/CONTROLLER, 2,048 INPUTS, 512 OUTPUTS Product Features • Microprocessor-Based, Full Cross-Point Video Matrix • Single Node CPU Systems Control up to 2,048 Cameras and 512 Monitors • Virtually Unlimited Expansion Using Networked Nodes (up to 24 nodes) • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 Full-Duplex Ports Available on the CPU • Logical Camera Selection • Priority Level Operation ® System 9760 is a full-featured video matrix switching control • Multiplexer and VCR Control Via Keyboard system that allows users to view and control up to 2,048 cameras and 512 monitors on a single node. Up to 96 individual user-deŢned • Built-in Video Loss Detection ID numbers can be assigned to allow or deny access to system • Built-in System Diagnostics functions. ® • Windows -Based System Management Software (Windows 98, The base conŢguration for this system is made up of a central 2000, XP) processing unit (CC1), matrix switching bay(s) (MXBs) with video • Factory Tested Pre-Packaged Systems input/output modules, and keyboard controllers (KBDs). Optional components can be added to enhance system capabilities. • ASCII Data Input to Interface Access Control and Other External Computer-Based Systems Powerful macro operation allows activation of commonly occurring • Step-Command Macro Programming events, either manually or automatically, based on time of day, day of week, day of year, and alarms. Macros may call system-wide • Remote Viewing and Control Over TCP/IP Networks Using PelcoNet™ sequences (tours); activate preset positions and auxiliaries on • Alarm and Relay Interface to DX9000 Series Digital Video Recorder properly equipped cameras; automate VCR control; and activate (DVR) external relays to turn lights on, lock doors, and control other auxiliary functions (additional equipment may be required). Optional Accessories System 9760 also includes built-in video loss detection and system • “Hot Switch” and Backup CPU Ensure Uninterrupted Operation diagnostic features. Video loss detection monitors incoming video signals to alert operators of a camera failure. Diagnostic monitor • Redundant Power Supplies for Switching Bays outputs are included to assist in set-up, programming, and • Coaxitron Translator Allows PTZ Communication Over Standard troubleshooting. Coaxial Cable Optional VCR management allows VCRs to be controlled directly • Responds to 5,000 Alarms from the system keyboards. Suitable VCRs can be monitored for • Network Interface Unit Allows Multiple Systems to Share Video and operational conditions ensuring continuous recording. Control Integration with the DX9000 Series Digital Video Recorder allows • Graphical User Interface (VMX200, VMX300) for SimpliŢed Control System 9760 to monitor and respond to the recorder’s video motion from External PC detection capabilities. System 9760 also monitors the operational • DVR Management status of DX9000 recorders on a network to provide fail-safe switchover to standby recorder(s) if a primary recorder(s) fails. Note: All CM9760 matrix systems require installation by a Pelco CertiŢed Dealer/Installer. This spec sheet may be used for purposes of information only and does not constitute approval or certiŢcation of the receiving party. Proof of certiŢcation must be provided prior to shipment of CM9760 matrix systems contained herein. VS I DataFAX SPEC: 2540 MANUAL: Not Available through DataFAX REQUIRED International Organization for Standardization; ® C540 / REVISED 1-04 Registered ISO 9001 SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS MATRIX SWITCHING BAY CENTRAL PROCESSING UNIT (CC1) The central processing unit communicates with external devices and accepts The matrix switching bay is a card cage with 16 available card slots for video input modules (VCCs) and one card slot for the video output module (VMC). commands from external computers, keyboards, graphical user interfaces Each bay includes a power supply and will support modules for up to 256 (GUIs), access control systems, casino data systems, programmable logic camera inputs and 16 monitor outputs. Multiple bays can be used to expand controllers (PLC), and lighting and intercom systems. a single 9760 CPU system to a maximum of 2,048 camera inputs and 512 An internal graphics accelerator card is included for displaying system monitor outputs. An optional backup power supply module (MPS) can be diagnostics and for programming. Sixteen RS-422 COM ports (expandable to installed in each bay to provide redundancy. 32) are provided for communication with external devices such as matrix ELECTRICAL switching bays, pan/tilt or dome receivers, and keyboards. A total of 120 RS- Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz 422 COM ports can be achieved by adding three CM9760-SER32 port Power Consumption 90 watts maximum (fully populated) expansion units (32 ports per unit). Communication Full duplex RS-422 using an RJ-45 connector ELECTRICAL VIDEO Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, auto- Inputs Sixteen input card slots for supporting 256 ranging inputs per bay Power Consumption 55 watts ® Outputs One output card slot for supporting 16 outputs Processor Pentium class CPU per bay Clock Speed 733 MHz Video Input Level 0.5 to 2 Vp-p, RS-170 composite video Memory 64 MB RAM Impedance 75 ohms terminating (looping versions Disk Drive 3.5-inch, 1.44 MB available) Flash Disk Storage 32 MB solid-state ţash memory Crosstalk -60 dB at 3.58 MHz Diagnostic Monitor Output One VGA, one RCA (composite video, NTSC, GENERAL or PAL), One S-Video Operating Temperature 14° to 122°F (-10° to 50°C) I/O Ports Sixteen RS-422 (expandable to 32); total Dimensions 10.5" H x 19.0" W x 20.0" D system capability is 120 ports.* (26.67 x 48.26 x 50.80 cm) Two RS-232 Mounting Fits 19-inch EIA Standard rack (6 RUs) One parallel printer port Unit Weight 21.9 lb (9.93 kg) One VGA output port 60.0 lb (27.22 kg), fully populated Two TV Out ports Shipping Weight 35.0 lb (15.88 kg) Two PC-AT compatible keyboard ports (one 73.0 lb (33.11 kg), fully populated front, one rear) CERTIFICATIONS GENERAL • CE, Class A (CM9760-MXB-X) Operating Temperature 32° to 120°F (0° to 49°C) • UL Listed (CM9760-MXB) Dimensions 7.0" H x 19.0" W x 19.5" D • UL Listed to Canadian safety standards (CM9760-MXB) (17.78 x 48.26 x 49.53 cm) • FCC, Class A (CM9760-MXB) Mounting Fits 19-inch EIA Standard rack (4 RUs) Unit Weight 26.5 lb (12.02 kg) Shipping Weight 53 lb (24 kg) CERTIFICATIONS • CE, Class B • UL Listed • UL Listed to Canadian safety standards • FCC, Class B * The CM9760-CC1 is equiped with 16 RS-422 COM ports; total capacity can be expanded to 32 ports by adding two CM9760-SER serial communication cards (8 ports each). Total system capability can be expanded to 120 RS-422 COM ports by adding three CM9760-SER-32 port expansion units (32 ports each) to the CC1. SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS MODELS CONTROLLER CM9760-CC1 CPU controller. Operates on 120 VAC, 60 Hz or 230 VAC, 50 Hz. (3 RUs) CM9760-SER Serial communication card (RS-422 SERCOM) provides eight communications ports to interface peripheral equipment (4 maximum per CPU.) CM9760-CC1-VID CPU VGA card; includes outputs for composite, S-Video, and VGA display of system diagnostics and programming. KEYBOARD CONTROLLER MATRIX BAY The CM9760 keyboard controller allows the user to control the system. CM9760-MXB Video matrix bay equipped with CM9760-MPS Desktop (KBD) and rack-mount (KBR) models are available. The keyboard power supply. 120 VAC, 60 Hz. (6 RUs). includes a variable speed, vector-solving joystick with zoom control knob for CM9760-MXB-X Same as CM9760-MXB except 230 VAC, 50 Hz. CM9760-MXBL Video matrix bay for use with downframe looping pan/tilt/zoom (PTZ) and dome control. From the keyboard, the user can cards (CM9760-DFL). No power required. (6 RUs) control GPI-activated devices, receivers, camera/monitor switching, and CM9760-MPS Matrix bay power supply (spare). 120 VAC, 60 Hz. multiplexer screen functions, and create single/dual patterns, zones, zone CM9760-MPS-X Matrix bay power supply (spare). 230 VAC, 50 Hz. labels, presets and preset recalls. The user can also arm and disarm alarms CM9760-DFC Downframe card and cable assembly; connects as well as implement stand-alone, direct mode operation. Twenty-four multiple matrix bays for expansion purposes. programmable soft keys can be individually labeled with installation-speciŢc CM9760-DFL Same as CM9760-DFC except has looping inputs. titles allowing logical camera selection based on the camera’s Ţeld of view CM9760-RPL Double-wide rear panel card for single bay looping; rather than camera numbers. maximum number of inputs per bay reduced to 128. CM9760-VCC Video camera card capable of accepting up to 16 ELECTRICAL camera inputs. Also requires a rear panel card Input Voltage 12 VDC from 120 VAC, 60 Hz or 230 VAC, (CM9760-DFC, CM9760-DFL, CM9760-RPC, or 50 Hz wall transformer (supplied) CM9760-RPL). Power Consumption 10 watts CM9760-RPC Rear panel (BNC) card provides 16 BNC connectors Communication RS-422, full duplex used to connect camera inputs to matrix bay. Operating Distance 4,000 feet (1,219 m) on 24 AWG wire CM9760-VMC4 Video monitor card providing 4 monitor outputs; re- Internal Relay Rating 1 A quires CM9760-RPM. CM9760-VMC8 Video monitor card providing 8 monitor outputs; re- GENERAL quires CM9760-RPM. Operating Temperature 32° to 120°F (0° to 49°C) CM9760-VMC12 Video monitor card providing 12 monitor outputs; Dimensions requires CM9760-RPM. CM9760-KBD 3.30" H x 15.53" W x 7.80" D CM9760-VMC16 Video monitor card providing 16 monitor outputs; (8.38 x 39.45 x 19.81 cm) requires CM9760-RPM. CM9760-KBR 7.00" H x 19.00" W x 1.75" D CM9760-VMM Video monitor module; expands outputs of (17.78 x 48.26 x 4.45 cm) CM9760-VMC4, CM9760-VMC8 or CM9760- Fits 19-inch EIA Standard rack (4 RUs) VMC12. Unit Weight CM9760-RPM Rear panel monitor card (BNC); provides 16 BNCs CM9760-KBD 4.6 lb (2.09 kg) to connect monitor outputs to matrix bay; also in- CM9760-KBR 6.4 lb (2.91 kg) terfaces video output signals from video output Shipping Weight card. CM9760-KBD 9 lb (4.09 kg) CM9760-KBR 11 lb (5.00 kg) KEYBOARDS CM9760-KBD Full-function desktop variable-speed keyboard. CERTIFICATIONS/PATENTS 120 VAC, 60 Hz. • CE, Class A (CM9760KBD-X) and Class B (CM9760-KBR-X) CM9760-KBD-X Same as CM9760-KBD except 230 VAC, 50 Hz. • FCC, Class A (CM9760-KBD and CM9760-KBR) CM9760-KBR Full-function 19-inch EIA rack mount keyboard (4 • U.S. Patent D-464,654 RUs). 120 VAC, 60 Hz. CM9760-KBR-X Same as CM9760-KBR except 230 VAC, 50 Hz. KBD200A Desktop keyboard with full switching capabilities, ADDITIONAL KEYBOARDS plus push-button control of PTZ functions. The KBD200A and KBD300A keyboards have also been engineered for use 12 VAC or ±12 VDC. (Requires KBDKIT for power.) with the CM9760 matrix switcher. KBD300A Desktop keyboard with full switching capabilities, plus joystick control of PTZ functions. KBD200A 12 VAC or ±12 VDC. (Requires KBDKIT for power.) The KBD200A provides control of camera/monitor switching; preset, pattern, and sequence operation; local and receiver auxiliary operation; and multiplexer screen functions. The KBD200A also provides push-button control of PTZ functions. (A KBDKIT is required for power.) KBD300A The KBD300A provides control of camera/monitor switching; preset, pattern, and sequence operation; local and receiver auxiliary operation; and multiplexer screen functions. The KBD300A also provides joystick control of PTZ functions. (A KBDKIT is required for power.) SYSTEM COMPONENTS AND ACCESSORIES VCR CONTROLLERS CM9760-DT ASCII translator; translates programmed ASCII CM9760-VCRC-P VCR controller; controls Pelco TLR2096, messages sent from an access control device or TLR2168, TLR3096, or TLR3168 VCRs. (1 RU) device capable of sending valid ASCII messages. CM9760-VCRC VCR controller; controls Sanyo and Sony 120 VAC, 60 Hz. Desktop model; 1.75" H x 5.50" model VCRs that support resistive ladder W x 8.80" D. remote control and Sony “S-Link” remote CM9760-DT-X Same as CM9760-DT except 230 VAC, 50 Hz. control. (64 VCRs per controller.) (1 RU) CM9760-DT4 Same as CM9760-DT except used to interface CM9760P-IRC Infrared VCR controller card cage; controls ACD devices to RS-422 COM ports on VCR functions using infrared. (128 VCRs/cage CM9760-CC1. max.) (3RUs) CM9760-DT4-X Same as CM9760-DT4 except 230 VAC, 50 Hz. CM9760P-IRC-JVC VCR control card for controlling up to 32 JVC CM9760-HS Hot switch interface unit; changeover unit that brand VCRs. monitors the status of a primary CC1 in a 9760 CM9760P-IRC-MIT VCR control card for controlling up to 32 system. (3 components, 1 RU each) Mitsubishi brand VCRs. CM9760-MDA Master distribution ampliŢer; inserts master time CM9760P-IRC-PAN VCR control card for controlling up to 32 and date from the CM9760-CC1 and a Panasonic brand VCRs. programmable title of up to twenty-four characters CM9760P-IRC-SHP VCR control card for controlling up to 32 Sharp on one to sixteen video signals. (3 RUs) brand VCRs. CM9760-MDA-X Same as CM9760-MDA except 230 VAC, 50 Hz. CM9760-IRC-TX VCR control cable (1 per VCR required). CM9760-NW1 Network interface unit; network CPU and software CM9760-VCRC-PTX VCR control cable; 50-foot cable for use with necessary for joining two or more independent CM9760-VCRC-P. systems together. (3 RUs) CM9760-VCRC-TX VCR control cable; 15-foot control cable (1/8- CM9760-REL Relay interface unit; connects directly to each inch jack on one end and bare leads on other system and provides dry contact switching for end) for connecting VCR to controller. direct or automatic control of peripheral CM9760-VCRC-C20 Same as CM9760-VCRC-TX except 20-foot equipment; each unit provides up to 64 SPST (6.1 m) length contact outputs. (1 RU) CM9760-VCRC-C50 Same as CM9760-VCRC-TX except 50-foot CM9760-RKIT Eight RJ-45 to DB9 converters for retroŢtting (15.2 m) length CM9760-CC1 with CM9750 peripherals. CM9760-SAT 16 input satellite video matrix switcher; allows the (Please consult Pelco to verify compatibility with selected VCRs.) user to distribute switching capability around a facility, reducing the number of coaxial cable runs MISCELLANEOUS to the 9760 and allowing local monitoring at the CM9760-ALM Alarm interface unit; connects directly to each satellite switch locations. (2 RUs) system; each unit can monitor up to 64 alarms CM9760-SER-32 Port expansion unit; 32 SERCOM ports per unit. Up and up to four units can be daisy-chained off to three units can be added to a CC1. (Check with one SERCOM port. (1 RU) Pelco Systems Applications Department before CM9760-CDU-T Code distribution unit; 16-channel RS-422 adding to an existing CM9760-CC1). Includes transmit only (2 data wires and ground) dis- interconnecting cables and adapters for DB9 and tributor. Primarily used for wiring up to 16 RJ45 connectors. Data interface can be RS-232 or pan/tilt/zoom receivers in a “star” conŢgura- RS-422. (4 RUs) tion. (1 RU) CM6800E-48X8 48 input satellite video matrix switcher; same ® CM9760-CXTA Coaxitron translator; generates coaxitron functionality as CM9760-SAT except supports up to signals for Pelco Coaxitron receivers; each 48 inputs. (3 RUs) translator supports up to 16 receivers. (1 RU) CM9760-DMR Data merger and port expander unit; this unit COMPATIBLE RECEIVERS allows multiple CM9760-CC1 units to control ® Spectra Series Spectra dome multiple protocol receiver. multiple pan/tilt/zoom cameras and allows ERD97P21-U Pelco P protocol receiver. multiple keyboards to communicate through ® LRD41C21-1/-2/-3 Legacy ‚ Ţxed speed receiver with presets. one CC1 port. (1 RU) LRD41C22-1/-2/-3 Same as LRD41C21 Series except variable speed CM9760-DMR-X Same as CM9760-DMR except 230 VAC, 50 receiver. Hz. ® Esprit Integrated pan/tilt positioning receiver. VMX200 and VMX300 Series Video management systems; graphical map/ Coaxitron Coaxitron translator allows Coaxitron control of icon-based user interface for mouse driven PTZ cameras. operator control from external PC. RU = Rack Unit. One RU is equivalent to 1.75 inches (4.45 cm) of vertical space. IdentiŢes number of rack units required to mount component in a 19-inch EIA Standard rack mount. Pelco Worldwide Headquarters: ® ® ® 3500 Pelco Way, Clovis, California 93612-5699 USA System 9760 , Coaxitron , and Esprit are registered trademarks of Pelco. ® USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 Windows is a registered trademark of Microsoft Corporation. SpeciŢcations subject to change without notice. International Tel: (559) 292-1981 • FAX (559) 348-1120 • DataFAX (559) 292-0435 ©Copyright 2004, Pelco. All rights reserved. ® www.pelco.com