control site PRODUCT SPECIFICATION ™ CM9740 Series Matrix MICROPROCESSOR-BASED, SWITCHER/CONTROLLER, 256 X 32 Product Features Optional Accessories • Modular System Expandable to 256 Inputs and 32 Outputs • “Hot Switch” and Backup CPU Ensure Uninterrupted Operation • Microprocessor-Based, Full Cross-Point Video Matrix • Redundant Power Supplies for Switching Bays • Sixteen RS-422 COM Ports and Two RS-232 Full Duplex Ports • ASCII Data Translator to Interface Access Control Systems and Other Available on the CPU External Systems • Logical Camera Selection • Coaxitron Translator Allows PTZ Communication Over Standard Coaxial Cable • Priority Level Operation • Responds to 5000 Alarms • Multiplexer and VCR Control Via a Keyboard Controller • Full-Function Desktop and Rack-Mount Keyboards • Built-In Video Loss Detection • Graphical User Interface (VMX200) for Simplified Control from • Built-In System Diagnostics External PC ® • Windows -Based System Management Software • Factory Tested Pre-Packaged Systems ™ System 9740 is a full-featured video matrix switching control sys- • Pre-Configured Matrix Bays Simplify System Design tem for use in medium-sized CCTV installations. This system allows users to control a maximum of 256 cameras to 32 video monitors. • Step-Command Macro Programming • Remote Viewing and Control Over TCP/IP Networks Using PelcoNet The base configuration for this system is made up of a central pro- cessing unit (CC1), a matrix switching bay (MXB), and a keyboard • Network Compatibility Allows 9740 Systems in Remote Locations to controller (KBD). Optional components may be added to enhance sys- Communicate with a Centralized, Master 9760 System tem capabilities. Pre-configured, pre-packaged systems make installation fast and simple. Each system is provided with Windows-based software for overall system programming. Powerful macro operation allows activation of commonly occurring events, either manually or automatically, based on time of day, day of week, day of year, and alarms. Macros may call system wide se- quences (tours), activate pre-positions and auxiliaries on properly equipped cameras, automate VCR control, activate external relays to turn lights on, lock doors, or control other auxiliary functions (addi- tional equipment may be required). System 9740 also includes built-in video loss detection and system diagnostic features. Video loss detection monitors incoming video signals to alert operators of a camera failure. Diagnostic monitor out- put (VGA) is included to assist in set-up, programming, and trouble- shooting. Optional VCR management allows VCRs to be controlled directly from the system keyboards. VCRs can be monitored for operational condi- tions ensuring continuous recording. DataFAX SPEC: 21508 MANUAL: Not Available through DataFAX International Standards Organization Registered ® C1508 / REVISED 10-02 Firm ISO 9001 Quality System SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS CENTRAL PROCESSING UNIT (CC1) MATRIX SWITCHING BAY The central processing unit communicates with external devices and The matrix switching bay is a card cage with 16 available card slots for video accepts commands from programmed and connected external computers, input modules and one card slot for a video output module (CM9740-VMC graphical user interfaces (GUIs), access control systems, casino data series). Each bay includes a power supply and will support modules for up to systems, programmable logic controllers (PLC), and lighting and intercom 256 camera inputs and 16 monitor outputs. A single matrix bay can be systems. configured for up to 256 non-looping video inputs and 16 monitors (standard models) or 128 looping video inputs and 16 monitors (‘S’ models). A dual bay An internal graphics accelerator card is included for displaying system system can be configured for up to 256 non-looping inputs and 32 monitors diagnostics and for programming. Sixteen RS-422 COM ports are provided (standard models) or 256 looping video inputs and 32 monitors (‘L’ models). for communication with external devices such as matrix switching bays, pan & tilt/dome receivers, and keyboards. ELECTRICAL Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz ELECTRICAL Power Consumption 90 watts maximum (fully populated) Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, auto-ranging Communication Full duplex RS-422 using either an RJ-45 or DB9 Power Consumption 35 watts (D type) connector Processor Pentium class CPU Inputs Sixteen input card slots for supporting 256 inputs Clock Speed 133 MHz or better per bay Disk Drive 3.5-inch, 1.44 MB Outputs One output card slot for supporting up to sixteen Hard Drive 16 MB disk-on-chip outputs per bay I/O Ports Sixteen RS-422 communication ports Two RS-232 communication ports VIDEO One printer port Video Input Level .5 to 2 Vp-p, RS-170 composite video One VGA/SVGA monitor output port Impedance 75 ohm terminating (looping versions available; One PS/2 mouse port add “L” or “S” suffix to model number when One PS/2-compatible keyboard port ordering) Crosstalk -55 dB @ 4.43 MHz GENERAL Operating Temperature 32° to 120°F (0° to 49°C) GENERAL Dimensions 5.25" H x 19.00" W x 14.25" D Operating Temperature 14° to 122°F (-10° to 50°C) (13.34 x 48.26 x 36.20 cm) Dimensions 10.5" H x 19.0" W x 20.0" D Mounting Fits 19-inch EIA Standard rack (3 RUs) (26.67 x 48.26 x 50.80 cm) Unit Weight 13.6 lb (6.18 kg) Mounting Fits 19-inch EIA Standard rack (6 RUs) Shipping Weight 37 lb (16.82 kg) Unit Weight 52.9 lb (23.8 kg), fully populated Shipping Weight 33 lb (15.00 kg) CERTIFICATIONS • CE, Class B CERTIFICATIONS • UL Listed • CE, Class A (CM9740-MXB-X) • UL Listed to Canadian safety standards • FCC, Class A (CM9740-MXB, CM9740-MXBL) • FCC, Class B • UL Listed (CM9740-MXB) • UL Listed to Canadian safety standards (CM9740-MXB) SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS MODELS CONTROLLER CM9740-CC1 CPU controller. Operates on 120 VAC,60 Hz or 230 VAC, 50 Hz. (3 RUs) MATRIX BAY CM9740-MXB Video matrix bay equipped with CM9760-MPS power supply. 120 VAC, 60 Hz. (6 RUs). CM9740-MXB-X Same as CM9760-MXB except 230 VAC, 50 Hz. CM9740-MXBL Video matrix bay for use with downframe looping KEYBOARD CONTROLLER cards (CM9760-DFL). No power required. (6 RUs) The keyboard controller allows the user to control the system. Desktop CM9760-MPS Matrix bay power supply (spare). 120 VAC, 60 Hz. (KBD) and rack-mount (KBR) models are available. The keyboard includes a CM9760-MPS-X Matrix bay power supply (spare). 230 VAC, 50 Hz. variable speed, vector-solving joystick with zoom control knob for pan/tilt/ CM9760-DFC Downframe card and cable assembly; connects zoom and dome control. From the keyboard, the user can control GPI multiple matrix bays for expansion purposes. activated devices, receivers, camera/monitor switching, and multiplexer CM9760-DFL Same as CM9760-DFC except has looping inputs. screen functions, and create single/dual patterns, zones, zone labels, CM9760-RPL Double wide rear panel card for single bay looping. presets and preset recalls. The user can also arm and disarm alarms as well Maximum number of inputs per bay reduced to 128. as implement stand-alone, direct mode operation. Twenty-four program- CM9760-VCC Video camera card capable of accepting up to mable soft keys can be individually labeled with installation specific titles 16 camera inputs. Also requires a rear panel card allowing logical camera selection based on the camera’s field of view rather such as CM9760-DFC, CM9760-DFL, or CM9760-RPL. than camera numbers. CM9760-RPC Rear panel (BNC) card provides 16 BNC connectors used to connect camera inputs to matrix bay. ELECTRICAL CM9740-VMC4 Video monitor card providing 4 monitor outputs. Input Voltage 12 VDC from 120 VAC, 60 Hz or 230 VAC, 50 Hz Requires CM9760-RPM. wall transformer (supplied) CM9740-VMC8 Video monitor card providing 8 monitor outputs. Power Consumption 10 watts Requires CM9760-RPM. Communication RS-422, full duplex CM9740-VMC12 Video monitor card providing 12 monitor outputs. Operating Distance 4,000 feet (1,219 m) on 24 AWG wire Requires CM9760-RPM. Internal Relay Rating 1 ampere CM9740-VMC16 Video monitor card providing 16 monitor outputs. Requires CM9760-RPM. GENERAL CM9740-VMM Video monitor module; expands outputs of Operating Temperature 32° to 120°F (0° to 49°C) CM9740-VMC4, CM9740-VMC8 or CM9740-VMC12. Dimensions CM9760-RPM Rear panel monitor card (BNC); provides 16 BNCs CM9760-KBD 3.30" H x 15.53" W x 7.80" D used to connect monitor outputs to matrix bay; also (8.38 x 39.45 x 19.81 cm) interfaces video output signals from video output CM9760-KBR 7.00" H x 19.00" W x 1.75" D card. (17.78 x 48.26 x 4.45 cm) Fits 19-inch EIA Standard rack (4 RUs) KEYBOARDS Unit Weight CM9760-KBD Full-function desktop variable-speed keyboard. CM9760-KBD 4.6 lb (2.09 kg) 120 VAC, 60 Hz. CM9760-KBR 6.4 lb (2.91 kg) CM9760-KBD-X Same as CM9760-KBD except 230 VAC, 50 Hz. Shipping Weight CM9760-KBR Full-function 19-inch EIA rack mount keyboard CM9760-KBD 9 lb (4.09 kg) (4 RUs). 120 VAC, 60 Hz. CM9760-KBR 11 lb (5.00 kg) CM9760-KBR-X Same as CM9760-KBR except 230 VAC, 50 Hz. CERTIFICATIONS/PATENTS • CE, Class A (CM9760-KBD-X) • CE, Class B (CM9760-KBR-X) • FCC, Class A (CM9760-KBD and CM9760-KBR) • U.S. Patent D-464,654 SYSTEM COMPONENTS AND ACCESSORIES VCR CONTROLLERS CM9760-DT ASCII translator; translates programmed ASCII CM9760-VCRC-P VCR controller; controls Pelco TLR2096, TLR2168, messages sent from an access control device or TLR3096, or TLR3168 VCRs. (1 RU) device capable of sending valid ASCII messages. CM9760-VCRC VCR controller; controls Sanyo and Sony model 120 VAC, 60 Hz. Desktop model; VCRs that support resistive ladder remote control 1.75" H x 5.50" W x 8.80" D. and Sony “S-Link” remote control. (64 VCRs per CM9760-DT-X Same as CM9760-DT except 230 VAC, 50 Hz. controller.) (1 RU) CM9760-DT4 Same as CM9760-DT except used to interface ACD CM9760P-IRC-JVC V9CR control card for controlling up to 32 JVC devices to RS-422 COM ports on CM9740-CC1. brand VCRs. 120 VAC, 60 Hz. CM9760P-IRC-MIT VCR control card for controlling up to 32 Mitsubishi CM9760-DT4-X Same as CM9760-DT4 except 230 VAC, 50 Hz. brand VCRs. CM9760-HS Hot switch interface unit; a computer changeover CM9760P-IRC-PAN VCR control card for controlling up to 32 Panasonic switch that monitors the status of a primary CC1 in brand VCRs. a 9740 or 9760 system. (3 components, 1 RU each) CM9760-IRC-TX VCR control cable (1 per VCR required). CM9760-MDA Master distribution amplifier; inserts time-date and CM9760-VCRC-PTX VCR control cable; 50-foot cable. Use with a programmable title of up to twenty-four CM9760-VCRC-P. characters on one to sixteen video signals. (3 RUs) CM9760-VCRC-TX VCR control cable; 15-foot control cable (1/8-inch CM9760-MDA-X Same as CM9760-MDA except 230 VAC, 50 Hz. jack to bare leads) for connecting VCR to controller. CM9760-NW1 Network interface unit; network CPU and software CM9760-VCRC-C20 Same as CM9760-VCRC-TX except 20-foot (6.1 m) necessary for joining two or more independent length systems together. (3 RUs) CM9760-VCRC-C50 Same as CM9760-VCRC-TX except 50-foot (15.2 m) CM9760-REL Relay interface unit; connects directly to each length system and provides dry contact switching for direct or automatic control of peripheral (Please consult Pelco to verify compatibility with selected VCRs.) equipment; each unit provides up to 64 SPST contact outputs. (1 RU) MISCELLANEOUS CM9760-SAT 16 input satellite video matrix switcher; allows the CM9760-ALM Alarm interface unit; connects directly to each user to distribute switching capability around a system; each unit can monitor up to 64 alarms and facility, reducing the number of coax runs to the up to four units can be daisy-chained off one 9740 and allowing local monitoring at the satellite SERCOM port. (1 RU) switch locations. (2 RUs) CM9760-CDU-T Code distribution unit; 16-channel RS-422 transmit CM6800E-48X8 48 input satellite video matrix switcher; same only (2-wire and ground) distributor. Primarily used functionality as CM9760-SAT except supports up to for “star” configuring up to 16 pan/tilt/zoom 48 inputs. (3 RUs) receiver data runs. (1 RU) ® CM9760-CXTA Coaxitron translator; generates coaxitron signals COMPATIBLE RECEIVERS ® for Pelco Coaxitron receivers; each translator Spectra Series Spectra dome multi-protocol receiver. supports up to 16 receivers. (1 RU) ERD97P21-U Pelco “P” protocol receiver. CM9760-DMR Data merger and port expander unit; this unit LRD41C21-1/-2/-3 Legacy‚ fixed speed receiver with presets. allows multiple CM9740-CC1 units to control LRD41C22-1/-2/-3 Same as LRD41C21 Series except variable speed multiple pan/tilt/zoom cameras and allows receiver. ® multiple keyboards to communicate through one Esprit Integrated pan/tilt positioning receiver. CC1 port. (1 RU) Coaxitron Coaxitron translator allows coaxitron control of PTZ CM9760-DMR-X Same as CM9760-DMR except 230 VAC, 50 Hz. cameras. VMX200 Series Video Management System; Graphical Map/Icon based User Interface for mouse driven operator RU = Rack Unit. One RU is equivalent to 1.75 inches (4.45 cm) of vertical control from external PC. space. Identifies number of rack units required to mount component in a 19-inch EIA Standard rack mount. Pelco Worldwide Headquarters: ™ System 9740 is a trademark of Pelco. 3500 Pelco Way, Clovis, California 93612-5699 USA ® ® ® Spectra , Coaxitron , and Esprit are registered trademarks of Pelco. USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 ® Windows is a registered trademark of Microsoft Corporation. International Tel: (559) 292-1981 • FAX (559) 348-1120 • DataFAX (559) 292-0435 Specifications subject to change without notice. ® www.pelco.com ©Copyright 2002, Pelco. All rights reserved.