control site PRODUCT SPECIFICATION CM9740 Series Matrix MICROPROCESSOR-BASED, SWITCHER/CONTROLLER, 256 X 32 Product Features • Modular System Expandable to 256 Inputs and 32 Outputs • Microprocessor-Based, Full Cross-Point Video Matrix • Sixteen RS-422 COM Ports and Two RS-232 Full-Duplex Ports Available on the CPU • Logical Camera Selection • Priority Level Operation • Multiplexer and VCR Control Via a Keyboard Controller ™ System 9740 is a full-featured video matrix switching control • Built-in Video Loss Detection system for use in medium-sized CCTV installations. This system • Built-in System Diagnostics allows users to control a maximum of 256 cameras to 32 video ® • Windows -Based System Management Software (Windows 98, monitors. 2000, XP) The base conŢguration for this system is made up of a central • Factory Tested Pre-Packaged Systems processing unit (CC1), a matrix switching bay (MXB), and a keyboard controller (KBD). Optional components may be added to enhance • ASCII Data Input to Interface Access Control Systems and Other system capabilities. External Systems • Step-Command Macro Programming Powerful macro operation allows activation of commonly occurring events, either manually or automatically, based on time of day, day • Remote Viewing and Control Over TCP/IP Networks Using PelcoNet™ of week, day of year, and alarms. Macros may call system-wide • Network Compatibility Allows 9740 Systems in Remote Locations to sequences (tours); activate preset positions and auxiliaries on Communicate with a Centralized, Master 9760 System properly equipped cameras; automate VCR control; and activate • Alarm and Relay Interface to DX9000 Series Digital Video Recorder external relays to turn lights on, lock doors, and control other (DVR) auxiliary functions (additional equipment may be required). System 9740 also includes built-in video loss detection and system diagnostic features. Video loss detection monitors incoming video signals to alert operators of a camera failure. Diagnostic monitor Optional Accessories output (VGA) is included to assist in set-up, programming, and troubleshooting. • “Hot Switch” and Backup CPU Ensure Uninterrupted Operation • Redundant Power Supplies for Switching Bays Optional VCR management allows VCRs to be controlled directly from the system keyboards. VCRs can be monitored for operational • Coaxitron Translator Allows PTZ Communication Over Standard conditions ensuring continuous recording. Coaxial Cable • Responds to 5,000 Alarms Integration with the DX9000 Series Digital Video Recorder allows System 9740 to monitor and respond to the recorder’s video motion • Graphical User Interface (VMX200, VMX300) for SimpliŢed Control detection capabilities. System 9740 also monitors the operational from External PC status of DX9000 recorders on a network to provide fail-safe • DVR Management switchover to standby recorder(s) if a primary recorder(s) fails. All CM9740 matrix systems require installation by a Pelco CertiŢed Dealer/ Installer. This spec sheet may be used for purposes of information only and does not constitute approval or certiŢcation of the receiving party. Proof of certiŢcation must be provided prior to shipment of CM9740 matrix systems contained herein. VS I DataFAX SPEC: 21508 MANUAL: Not Available through DataFAX REQUIRED International Organization for Standardization; ® C1508 / REVISED 10-03 Registered ISO 9001 SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS MATRIX SWITCHING BAY CENTRAL PROCESSING UNIT (CC1) The matrix switching bay is a card cage with 16 available card slots for video The central processing unit communicates with external devices and accepts input modules and one card slot for a video output module (CM9740-VMC commands from external computers, graphical user interfaces (GUIs), access series). Each bay includes a power supply and will support modules for up to control systems, casino data systems, programmable logic controllers (PLC), 256 camera inputs and 16 monitor outputs. A single matrix bay can be and lighting and intercom systems. conŢgured for up to 256 non-looping video inputs and 16 monitors (standard models) or 128 looping video inputs and 16 monitors (‘S’ models). A dual bay An internal graphics accelerator card is included for displaying system system can be conŢgured for up to 256 non-looping inputs and 32 monitors diagnostics and for programming. Sixteen RS-422 COM ports are provided (standard models) or 256 looping video inputs and 32 monitors (‘L’ models). for communication with external devices such as matrix switching bays, pan/ tilt or dome receivers, and keyboards. ELECTRICAL Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz ELECTRICAL Power Consumption 90 watts maximum (fully populated) Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, auto- Communication Full duplex RS-422 using an RJ-45 connector ranging Inputs Sixteen input card slots for supporting 256 Power Consumption 35 watts ® inputs per bay Processor Pentium class CPU Outputs One output card slot for supporting up to 16 Clock Speed 133 MHz or better outputs per bay Memory 16 MB RAM Disk Drive 3.5-inch, 1.44 MB VIDEO Flash Storage 16 MB solid-state ţash memory Video Input Level 0.5 to 2 Vp-p, RS-170 composite video I/O Ports Sixteen RS-422 communication ports Impedance 75 ohms terminating (looping versions Two RS-232 communication ports available; add “L” or “S” sufŢx to model One printer port number when ordering) One VGA/SVGA monitor output port Crosstalk -60 dB at 3.58 MHz One PS/2 mouse port One PS/2-compatible keyboard port GENERAL Operating Temperature 14° to 122°F (-10° to 50°C) GENERAL Dimensions 10.5" H x 19.0" W x 20.0" D Operating Temperature 32° to 120°F (0° to 49°C) (26.67 x 48.26 x 50.80 cm) Dimensions 5.25" H x 19.00" W x 14.25" D Mounting Fits 19-inch EIA Standard rack (6 RUs) (13.34 x 48.26 x 36.20 cm) Unit Weight 21.9 lb (9.93 kg) Mounting Fits 19-inch EIA Standard rack (3 RUs) 60.0 lb (27.22 kg), fully populated Unit Weight 13.6 lb (6.18 kg) Shipping Weight 35.0 lb (15.88 kg) Shipping Weight 37 lb (16.82 kg) 73.0 lb (33.11 kg), fully populated CERTIFICATIONS CERTIFICATIONS • CE, Class B • CE, Class A (CM9740-MXB-X) • UL Listed • FCC, Class A (CM9740-MXB, CM9740-MXBL) • UL Listed to Canadian safety standards • UL Listed (CM9740-MXB) • FCC, Class B • UL Listed to Canadian safety standards (CM9740-MXB) SYSTEM COMPONENTS/TECHNICAL SPECIFICATIONS MODELS CONTROLLER CM9740-CC1 CPU controller. Operates on 120 VAC, 60 Hz or 230 VAC, 50 Hz. (3 RUs) MATRIX BAY CM9740-MXB Video matrix bay equipped with CM9760- MPS power supply. 120 VAC, 60 Hz. (6 RUs). CM9740-MXB-X Same as CM9760-MXB except 230 VAC, 50 Hz. CM9740-MXBL Video matrix bay for use with downframe looping cards (CM9760-DFL). No power required. (6 RUs) KEYBOARD CONTROLLER CM9760-MPS Matrix bay power supply (spare). 120 VAC, 60 The CM9760 keyboard controller allows the user to control the system. Hz. Desktop (KBD) and rack-mount (KBR) models are available. The keyboard CM9760-MPS-X Matrix bay power supply (spare). 230 VAC, 50 includes a variable speed, vector-solving joystick with zoom control knob for Hz. pan/tilt/zoom (PTZ) and dome control. From the keyboard, the user can CM9760-DFC Downframe card and cable assembly; control GP-activated devices, receivers, camera/monitor switching, and connects multiple matrix bays for expansion multiplexer screen functions; and create single/dual patterns, zones, zone purposes. CM9760-DFL Same as CM9760-DFC except has looping labels, presets, and preset recalls. The user can also arm and disarm alarms inputs. as well as implement stand-alone, direct mode operation. Twenty-four CM9760-RPL Double-wide rear panel card for single bay programmable soft keys can be individually labeled with installation-speciŢc looping; maximum number of inputs per bay titles allowing logical camera selection based on the camera’s Ţeld of view reduced to 128. rather than camera numbers. CM9760-VCC Video camera card capable of accepting up to 16 camera inputs. Also requires a rear panel ELECTRICAL card (CM9760-DFC, CM9760-DFL, Input Voltage 12 VDC from 120 VAC, 60 Hz or 230 VAC, 50 CM9760-RPC, or CM9760-RPL). Hz wall transformer (supplied) CM9760-RPC Rear panel (BNC) card provides 16 BNC Power Consumption 10 watts connectors used to connect camera inputs to Communication RS-422, full duplex matrix bay. Operating Distance 4,000 feet (1,219 m) on 24 AWG wire CM9740-VMC4 Video monitor card providing 4 monitor Internal Relay Rating 1 A outputs; requires CM9760-RPM. CM9740-VMC8 Video monitor card providing 8 monitor GENERAL outputs; requires CM9760-RPM. Operating Temperature 32° to 120°F (0° to 49°C) CM9740-VMC12 Video monitor card providing 12 monitor Dimensions outputs; requires CM9760-RPM. CM9760-KBD 3.30" H x 15.53" W x 7.80" D CM9740-VMC16 Video monitor card providing 16 monitor (8.38 x 39.45 x 19.81 cm) outputs; requires CM9760-RPM. CM9760-KBR 7.00" H x 19.00" W x 1.75" D CM9740-VMM Video monitor module; expands outputs of (17.78 x 48.26 x 4.45 cm) CM9740-VMC4, CM9740-VMC8 or CM9740- Fits 19-inch EIA Standard rack (4 RUs) VMC12. Unit Weight CM9760-RPM Rear panel monitor card (BNC); provides 16 CM9760-KBD 4.6 lb (2.09 kg) BNCs to connect monitor outputs to matrix CM9760-KBR 6.4 lb (2.91 kg) bay; also interfaces video output signals from Shipping Weight video output card. CM9760-KBD 9 lb (4.09 kg) CM9760-KBR 11 lb (5.00 kg) KEYBOARDS CM9760-KBD Full-function desktop variable-speed CERTIFICATIONS/PATENTS keyboard. 120 VAC, 60 Hz. • CE, Class A (CM9760-KBD-X) CM9760-KBD-X Same as CM9760-KBD except 230 VAC, • CE, Class B (CM9760-KBR-X) 50 Hz. • FCC, Class A (CM9760-KBD and CM9760-KBR) CM9760-KBR Full-function 19-inch EIA rack mount keyboard • U.S. Patent D-464,654 (4 RUs). 120 VAC, 60 Hz. CM9760-KBR-X Same as CM9760-KBR except 230 VAC, 50 Hz. ADDITIONAL KEYBOARDS KBD200A Desktop keyboard with full switching The KBD200A and KBD300A keyboards have also been engineered for use capabilities, plus push-button control of PTZ functions. 12 VAC or ±12 VDC. (Requires with the CM9740 matrix switcher. KBDKIT for power.) KBD300A Desktop keyboard with full switching KBD200A capabilities, plus joystick control of PTZ The KBD200A provides control of camera/monitor switching; preset, pattern, functions. 12 VAC or ±12 VDC. (Requires and sequence operation; local and receiver auxiliary operation; and KBDKIT for power.) multiplexer screen functions. The KBD200A also provides push-button control of PTZ functions. (A KBDKIT is required for power.) KBD300A The KBD300A provides control of camera/monitor switching; preset, pattern, and sequence operation; local and receiver auxiliary operation; and multiplexer screen functions. The KBD300A also provides joystick control of PTZ functions. (A KBDKIT is required for power.) SYSTEM COMPONENTS AND ACCESSORIES VCR CONTROLLERS CM9760-MDA Master distribution ampliŢer; inserts master CM9760-VCRC-P VCR controller; controls Pelco TLR2096, time and date from the CM9740-CC1 and a TLR2168, TLR3096, or TLR3168 VCRs. (1 RU) programmable title of up to twenty-four CM9760-VCRC VCR controller; controls Sanyo and Sony characters on one to sixteen video signals. model VCRs that support resistive ladder (3 RUs) remote control and Sony “S-Link” remote CM9760-MDA-X Same as CM9760-MDA except 230 VAC, control. (64 VCRs per controller.) (1 RU) 50 Hz. CM9760P-IRC-JVC VCR control card for controlling up to 32 JVC CM9760-NW1 Network interface unit; network CPU and brand VCRs. software necessary for joining two or more CM9760P-IRC-MIT VCR control card for controlling up to 32 independent systems together. (3 RUs) Mitsubishi brand VCRs. CM9760-REL Relay interface unit; connects directly to each CM9760P-IRC-PAN VCR control card for controlling up to 32 system and provides dry contact switching for Panasonic brand VCRs. direct or automatic control of peripheral CM9760-IRC-TX VCR control cable (1 per VCR required). equipment; each unit provides up to 64 SPST CM9760-VCRC-PTX VCR control cable; 50-foot cable. Use with contact outputs. (1 RU) CM9760-VCRC-P. CM9760-SAT 16 input satellite video matrix switcher; CM9760-VCRC-TX VCR control cable; 15-foot control cable (1/8- allows the user to distribute switching inch jack on one end and bare leads on other capability around a facility, reducing the end) for connecting VCR to controller. number of coaxial cable runs to the 9740 and CM9760-VCRC-C20 Same as CM9760-VCRC-TX except 20-foot allowing local monitoring at the satellite (6.1 m) length switch locations. (2 RUs) CM9760-VCRC-C50 Same as CM9760-VCRC-TX except 50-foot CM6800E-48X8 48 input satellite video matrix switcher; same (15.2 m) length functionality as CM9760-SAT except supports up to 48 inputs. (3 RUs) (Please consult Pelco to verify compatibility with selected VCRs.) COMPATIBLE RECEIVERS ® MISCELLANEOUS Spectra Series Spectra dome multiple protocol receiver. CM9760-ALM Alarm interface unit; connects directly to each ERD97P21-U Pelco P protocol receiver. ® system; each unit can monitor up to 64 alarms LRD41C21-1/-2/-3 Legacy ‚ Ţxed speed receiver with presets. and up to four units can be daisy-chained off LRD41C22-1/-2/-3 Same as LRD41C21 Series except variable one SERCOM port. (1 RU) speed receiver. ® CM9760-CDU-T Code distribution unit; 16-channel RS-422 Esprit Integrated pan/tilt positioning receiver. transmit only (2 data wires and ground) Coaxitron Coaxitron translator allows Coaxitron control distributor. Primarily used for wiring up to 16 of PTZ cameras. pan/tilt/zoom receivers in a “star” conŢguration. (1 RU) RU = Rack Unit. One RU is equivalent to 1.75 inches (4.45 cm) of vertical ® CM9760-CXTA Coaxitron translator; generates coaxitron space. IdentiŢes number of rack units required to mount component in a signals for Pelco Coaxitron receivers; each 19-inch EIA Standard rack mount. translator supports up to 16 receivers. (1 RU) CM9760-DMR Data merger and port expander unit; this unit allows multiple CM9740-CC1 units to control multiple pan/tilt/zoom cameras and allows multiple keyboards to communicate through one CC1 port. (1 RU) CM9760-DMR-X Same as CM9760-DMR except 230 VAC, 50 Hz. VMX200 and VMX300 Series Video management systems; graphical map/ icon-based user interface for mouse driven operator control from external PC. CM9760-DT ASCII translator; translates programmed ASCII messages sent from an access control device or device capable of sending valid ASCII messages. 120 VAC, 60 Hz. Desktop model; 1.75" H x 5.50" W x 8.80" D. CM9760-DT-X Same as CM9760-DT except 230 VAC, 50 Hz. CM9760-DT4 Same as CM9760-DT except used to interface ACD devices to RS-422 COM ports on CM9740-CC1. 120 VAC, 60 Hz. CM9760-DT4-X Same as CM9760-DT4 except 230 VAC, 50 Hz. CM9760-HS Hot switch interface unit; changeover unit that monitors the status of a primary CC1 in a 9740 or 9760 system. (3 components, 1 RU each) ™ ™ PelcoNet and System 9740 are trademarks of Pelco. Pelco Worldwide Headquarters: ® ® ® ® Spectra , Coaxitron , Legacy and Esprit are registered trademarks of Pelco. 3500 Pelco Way, Clovis, California 93612-5699 USA ® Pentium is a registered trademark of Intel Corporation. USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 ® Windows is a registered trademark of Microsoft Corporation. International Tel: (559) 292-1981 • FAX (559) 348-1120 • DataFAX (559) 292-0435 SpeciŢcations subject to change without notice. ® ©Copyright 2003, Pelco. All rights reserved.. www.pelco.com