MATRIX SWITCHERS CM9500 MATRIX PRODUCT SPECIFICATION ® CM9500 Series Matrix MICROPROCESSOR-BASED CROSS-POINT VIDEO SWITCHER, 208 X 16 Product Features • Maximum of 208 Inputs x 16 Monitor Outputs (Fully Configured) ® • Compatible with all Existing Coaxitron Receivers • 14 Programmable Tours (64 Steps Each, Including Presets) • Two Line X 28 Character Message Titling Capability Plus Camera ID and Time and Date • RS-422 Serial Communications Port • Printer Interface for Recording System Status and Events • Preset Capability Standard • Programmable Events (Timed Tours) • Up to 64 Alarms Inputs • Single Compact CPU, Card Cage and Power Supply Requires 12.20 Inches (30.98 cm) of Rack Space • Menu Driven Programming • Eight Keyboard Capability • Password Enabled User/Keyboard Priority, Partitioning, CM9502 CARD CAGE/CPU AND CM9502-KBD KEYBOARD CONTROL Protection The System 9500 Coaxitron Matrix is a microprocessor-based cross-point video switcher engineered to fulfill the needs of medium to large facilities. The CM9502 is designed for ease of installation, operation and management of complex CCTV systems. Aesthetic, easy-to-use keyboards and menu driven programming combine to facilitate system operation and management. Priority, partitioning and lockout are all user programmable from the highest priority level. Password priority additionally enables any degree of flexibility required to manage user restrictions and capabilities from any system keyboard. In its basic configuration, the CM9502 may be configured to accommodate a maximum of 208 video inputs, 16 monitor outputs, and 8 independent keyboards. Standard features include the ability to program camera presets, sequences, tours, events, alarms, and block switching. Each unit is equipped with a RS-422 serial communications port and a printer interface port. The Pelco System 9500 is designed to meet the most demanding CCTV system requirements. International Standards Organization Registered Firm ISO 9001 Quality System DataFAX Documents SPEC: 2500 MANUAL: 25046 (CM9500 Keyboards); Switcher Manual Not Available C500/REVISED 10-00 (Product specifications and manuals also available through Pelco Online at www.pelco.com) 389 CM9502 CARDCAGE *(INCLUDES CPU & POWER SUPPLY CARD) VIDEO INTERFACE CABLE CM9516L INPUT (16 VIDEO INPUTS card) WITH LOOPING) X13MAX VIDEO/CONTROL INPUTS CM9504 VIDEO LOOPING OUTPUT CARD COLLECTION PANEL (4 VIDEO OUT) MAX OF 16 MONITOR OUTPUTS CPU CARD (8 KEYBOARD INPUTS) MAX OF 8 POWER SUPPLY CARD KEYBOARD INPUTS LOOPING VIDEO OUTPUTS CM9500 SYSTEM CARD CAGE CONFIGURATION, 208 INPUTS, 16 OUTPUTS Shown 45° 60° Max Tilt 10.01 (25.43) 9.65 (24.51) CM9505D3 DESKTOP KEYBOARD 1.59 (4.04) 11.02 (27.99) 4.03 (10.24) CM9502-KBD KEYBOARD CONTROL CM9505R3 RACK MOUNT KEYBOARD CM9502 (REAR VIEW) (CONFIGURED WITH 11 INPUT CARDS, CM9502 CARD CAGE/CPU 4 OUTPUT CARDS, 2 BLANK-OFF PLATES) 390 CM9500 MATRIX MATRIX SWITCHERS MATRIX SWITCHERS CM9500 MATRIX TECHNICAL SPECIFICATIONS SERIAL INTERFACE CARD CAGE Physical Layer RS-422 GENERAL Protocol ASCII Programmable Switching Number of Ports Two, looped Duration 1 second min.; 99 seconds max. Communication Maximum Amount Parameters 4800 baud, 8 data bits, 1 start bit, of Tours 14 1 stop bit, even parity (11-bit word) Programmable Number of Steps Per Tour 64 PARALLEL PORT (PRINTER) INTERFACE Programmable Number of Number of Ports One Cameras/Presets Per Step 16/16 Speed Programmable Connector Type 25-pin, D-type (female) CAMERA INPUTS Maximum Cable Length 50 feet (15.24 m) single ended Number 208 max. per card cage (no alarm, relay follow); 16 per video input card POWER SUPPLY Type 75 ohm unbalanced terminating or Voltage 240 volts, 50 Hz or 120 volts, 60 Hz looping; jumper selectable (selectable) Level 1V peak-to-peak (±6 dB) Range +10/-20% Connector Panel mount BNC(s) Consumption 200 watts Temperature 20 to 95°F (-7 to 35°C) MONITOR OUTPUTS* Humidity 80% maximum Number 16 per card cage; 4 per output card Fusing 1.5A at 230 volt AC operation Type 75 ohm unbalanced 3A at 120 volt AC operation Level 1V peak-to-peak nominal Switch Rocker type DC Level Blanking on OV, sync tip clamped Video Fail Detection PHYSICAL SPECIFICATIONS Type Horizontal sync detector Dimensions 19" W x 12.20" H x 14" D Action Switch to black source from power (48.26 x 30.98 x 35.56 cm) supply Shipping Weight 45 lb (20.39 kg) approximate (fully Connector PC mount BNC(s) configured) VIDEO KEYBOARD Frequency Response ±3 dB @ 6 MHz GENERAL Gain 0 dB (±0.5 dB) Number Key Pad 0–9, CLEAR, SELECT Differential Gain Typical 0.5%–max. <1.0% Programming Functions F1 – F12 Differential Phase Typical 0.5°–max. <1.0° Selection Functions Monitor (MON) Field Tilt Typical 0.3%–max. <0.5% Camera (CAM) Line Tilt Typical 0.25%–max. <0.5% TOUR Hum <60 dB (below <1V peak-to-peak) Preset, seq/go Signal-to-Noise Ratio 58 dB ALARM ACK Crosstalk (input to input) 60 dB at 6 MHz Lens Functions IRIS, OPEN/CLOSE Feedthrough (input to output) 60 dB at 6 MHz Focus, near/far CHARACTER GENERATOR ZOOM, TELE/WIDE (in/out) Display White with black border Pan and Tilt Pan up/down Camera Identification Two lines of 28 characters Tilt left/right Programmable Yes; on-screen, menu driven ® Note: Variable speed Legacy pan & tilts must be used with a KEYBOARD INTERFACE variable-speed keyboard. Protocol RS-422 POWER SUPPLY Number of Ports Eight Voltage ±12 V from Matrix Maximum Number of Consumption 7 watts Independent Keyboards Eight maximum. (CPU will power Temperature 20 to 95°F (-7 to 35°C) only two keyboards. Each Humidity 80% maximum additional keyboard will require a Connector 8-pin modular connector (RJ-45) CM9505UPS remote power supply.) Speed 1200 baud KEYBOARD COMMUNICATIONS Connector Label Control keyboards Protocol Balanced RS-422 Connector Type 8-pin modular type female (RJ-45) Number of Ports Two Cable Type 25-foot (7.62 m) flat unshielded Maximum Number (supplied); (may be shielded) of Keyboards Eight keyboard ports available Speed 1200 baud ALARM OUTPUTS Connector type 8-pin modular connector (RJ-45) Number of Outputs Two Connector Type Two 37-pin, D-type male PHYSICAL SPECIFICATIONS Contact Configuration Normally open and normally closed Dimensions Contact Rating 1 amp (60 watts AC/30 watts DC) CM9502-KBD See dimension drawing CM9505D3 3.5" H x 17.00" W x 5.25" D ALARM INPUTS* (8.89 x 43.18 x 13.33 cm) Number of Alarms 64 CM9505R3 3.5" H x 19.00" W x 5.25" D Connector Label Alarm input connector (8.89 x 48.26 x 13.33 cm) Connector Type Two 37-pin, D-type female CM9505R5 5.25" H x 19.00" W x 2.00" D Sensing Either N.O. or N.C. (auto sensed (13.33 x 48.26 x 5.08 cm) upon system power-up) CM9505R5-VS 5.25" H x 19.00" W x 2.00" D *The CM9502 operating system grants top priority to monitor (13.33 x 48.26 x 5.08 cm) control and active camera control, regardless of alarm program- Shipping Weight (approximate) ming. In order to ensure accurate alarm reporting, alarms should CM9502-KBD 3 lb (1.36 kg) always be programmed to report to a dedicated monitor or group CM9505D3 6 lb (2.72 kg) of monitors. CM9505R3 7 lb (3.17 kg) CM9505R5 7 lb (3.17 kg) CM9505R5-VS 7 lb (3.17 kg) 391 TECHNICAL SPECIFICATIONS ® CM9505IC-50 Same as CM9505IC except 50-foot CARD CAGE/CPU/POWER SUPPLY (15.24 m) cable CM9502 System 9500 rack-mounted matrix card CM9505J Junction box set to adapt keyboard RJ- cage with CPU card and power supply 45 8-pin male modular cord/connector card. Seventeen available slots can be to multiconductor cable. Set of two. configured with any combination of the Barrier strip to RJ-45 8-pin female following: Up to thirteen CM9516 input modular connector. Also includes one cards, four CM9504 output cards, two pre-assembled cable for CPU end. CM9532 relay follow cards, or one CM9505UPS Remote power supply for CM9505 Series CM9564 alarm interface card. keyboards. Use when power supplied CM9502-PAL Same as CM9502, except for 230 VAC, from CPU is inadequate due to excessively 50 Hz International PAL operation. long wire runs or when CPU derived CM9501B1 Blank-off plate to cover one unused slot on power is impractical or impossible the rear of the CM9502 card cage. (i.e., fiber optic transmission of RS-422 keyboard data). (Required for each VIDEO INPUT CARDS additional keyboard if more than two are CM9516 16-channel video input/output control card used. CPU will only power two assembly. Equipped with BNC connectors keyboards.) for video input/Coaxitron control output to CM9505UPS-X Same as CM9505UPS except 230 VAC 16 cameras. Inputs may be individually operation unterminated, if necessary. Looping CM9505UPS-422 Same as CM9505UPS except has RS-422 repeater applications use CM9516L. CM9505UPS-422X Same as CM9505UPS-422 except CM9516L 16-channel video input/output card 230 VAC operation assembly. Inputs are individually switch- able for terminated or looping operation. External, rack-mounted video collection ALARM INTERFACE CARD panel with 4-foot coaxial ribbon cable CM9564 64-input alarm interface card. Provides provides easy access looping capability for for 64 NO/NC inputs to CPU via two all 16 inputs. 37-pin female D-connectors CM9564J/64 64-input alarm interface panel. Provides barrier strip for incoming alarm wiring MONITOR OUTPUT CARD and two 37-pin D-connector outputs for CM9504 Video and control output switch card. CM9564 alarm interface card. Includes Provides video output with character two D-to-D interconnect cables generation for 4 monitors. Supports NTSC CM9564J/32 Same as CM9564J/64 except for 32 inputs and PAL video formats. and supplied with one interconnect cable CONTROL/PROGRAMMING KEYBOARDS RELAY INTERFACE CARD CM9502-KBD Full function desktop keyboard. Provides CM9532A 32-output relay interface card. Provides variable speed joystick control for pan & tilt 32 NO/NC outputs controlled by CPU. functions, lens control switches, auxiliary D-connector output (for use with function switches, numeric data entry keypad, CM9502 card cage only) 12-key function keypad, and 40-character x CM9532J/32 32-output relay interface panel. Provides 2-row backlit LCD display. Derives power barrier strip for outgoing relay pairs and from main CPU/card cage. Connects to CPU D-connector for interconnect to CM9532 utilizing integral RJ-45 8-pin modular relay interface card. Supplied with four connector; 25-foot (7.62 m) interconnect D-to-D interconnect cables cable included. Keyboard compatible with CM9532J/8 Same as CM9532J/32 except for 8 external fiber optic/wireless receivers and outputs and supplied with one intercon- transmitters. Wrist rest included nect cable CM9505D3 Same as CM9502-KBD except slant design (3.5" H x 17" W x 5.25" D) RELATED PRODUCTS Wrist rest not included. ERD2200 Outdoor, fixed speed, Coaxitron receiver CM9505R3 Same as CM9505D3 except rack (See C1506spec) mountable (3.5" H x 19" W x 5.25" D) IRD2024 Indoor, fixed speed, Coaxitron receiver CM9505R5 Same as CM9505R3 except (See C1506 spec) CX9000RX Series Outdoor fixed speed Coaxitron with 5.25" H x 19" W x 2.00" D presets (See C554 spec) CM9505R5-VS Same as CM9505R5 except has variable LRD41A11 Series Legacy fixed speed receiver with presets speed joystick control (See C553 spec) LRD41C21 Series Legacy fixed speed receiver with presets KEYBOARD OPTIONS (See C557 spec) CM9505IC 25-foot (7.62 m) interconnecting cable, LRD41C22 Series Legacy variable speed receiver, with CPU to keyboard, pre-assembled with presets (See C557 spec) modular RJ-45 connectors Specifications subject to change without notice. Indicates change or addition since last revision. ©Copyright 2000, Pelco. All rights reserved. Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • Pelco Online @ http://www. pelco.com In the US and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120 • DataFAX +1(559) 292-0435 392 CM9500 MATRIX MATRIX SWITCHERS