Recorders Data Sheet ™ MRC 7000 Proven Recording Reliability that Became the Industry Standard! APPLICATIONS: Recorder/Controller/Profiler Record, profile and security functionality for reliability in diverse industry applications DESCRIPTION • Process Validation The MRC7000 Recorder/Controller is a microproces- • Trend Analysis • Regulatory Compliance sor based circular chart instrument capable of • Product Safety measuring, displaying, recording and controlling up to - Temperature two process variables from a variety of inputs. - pH Level Record and control functions, alarm settings and INDUSTRIES other parameters are easily configured via the keys Oven, chamber, furnaces, heat treating, food on the front cover and self-prompting displays. processing, harsh water environments All user entered data can be protected against FEATURES/BENEFITS unauthorized changes via the MRC7000 Enable Mode • Micro-based recording with controller or profiler options with programming setpoint profile capabil- security system. ity in one instrument • Two displays allow you to see critical process values at the same time (on 2 pen units) • Easy, straightforward programming allows you to configure your recorder with a logical step-by-step process using a simple keypad • Optional true time based profiling capability puts you in control of your process • Reliability—maintenance free recording for years to come Customer Service +1 800.390.6405 Technical Support +1 800.866.6659 www.partlow.com • www.danaherindustrialcontrols.com TM TM TM TM TM Process Automation Worldwide Brands: LFE • Partlow • PMA • Rustrak • West Recorders ™ MRC 7000 Proven Recording Reliability that Hollowshaft, Incremental Encoders Recorder/Controller/Profiler Became the Industry Standard! SPECIFICATIONS STANDARD FEATURES ELECTRICAL PERFORMANCE Functionality: Digital; Available in four Power Consumption: 25VA max. GENERAL: configurations: Record only, High/Low limit Line Voltage: 115V or 230VAC ±10%, 50–60Hz. Input Measurement Error: Type J, K, T, E, N, C, T/ optional, Controlling Recorder, Profiling C and RTD ±0.25% of reading plus 1 degree @ Controlling Recorder. OUTPUTS 25°C; Type R, S, B, C, T/C ±0.25% of span @ Display: One digital display (std.); 2nd display 25°C. CONTROL OUTPUTS: with 2 pen (optional); 0.56˝ high, red, seven Ambient Temperature Error: 0.01% of span per segment LED; 3 button keypad; automatic and Relay: SPST/SPDT; 115VAC 5.0A Resistive, 1/ degree C deviation from 25°C. decimal point positioning. Two alarm 8HP, 250VA; 230VAC 2.5A Resistive, 1/8HP, Cold Junction Compensation Error: ±0.2% @ indications possible per pen. 250VA. 25°C. Status Indicators: 7 LED status indicators – Out SSR Driver: Open collector output; short Cold Junction Compensation Rejection: ±0.04% 1, 2, Man (Ramp, Soak or Seg 1–6 for profiler circuit protected @ 100mA max; provides deviation from 25°C. option only), one green LED pen 2 indicator, 4VDC @ 20mA or 3VDC @ 40mA. Common Mode Rejection: 90dB minimum; 24VAC ALRM1/ALRM2 with red LEDs. Current: 0–20mA or 4–20mA; 0–650 ohm maximum for RTD input; 115VAC max for other Chart: 10˝ circular chart; 100 charts furnished maximum load. inputs. with each instrument. Unless otherwise ALARM/EVENT OUTPUTS (Options): Normal Mode Rejection: 85dB minimum @ 60Hz specified, charts shipped with instrument are Relay: SPST/SPDT: 115VAC 5.0A resistive, 1/ or greater. 0–100 range. 24 hour rotation default setting. 8HP, 250VA. 230VAC 2.5A resistive, 1/8HP, Chart Accuracy: Recording: 0.5% of span. Chart Chart Drive: DC Stepper Motor. 250VA. Rotation: ±0.5% of rotation time. Chart Rotation: User configurable from 0.1 and SSR Driver: Open collector output; short Process Value Output Error Limit: 0.5% of span. 999.9 hours per revolution. circuit protected @ 100mA max; provides Record Error Limit: ±0.5% of chart span or better Chart Range: Bottom and top of span –9999 to 4VDC @ 20mA or 3VDC @ 40mA. typically; ±1.0% of chart span maximum. 9999 units. Process Alarm: Direct (High) or Reverse (Low) CONTROL PARAMETERS (optional): Pen Type: One or two disposable fiber tip pen. –9999 to 9999 units. Proportional Band Output 1/Output 2: 1 to 3000 Pen Color: Pen 1 (red); Pen 2 (green). Deviation Alarm: Direct (Deviation above units. setpoint) or Reverse (Deviation below Memory Backup: Battery; 5 year normal life. setpoint) –3000 to 3000 units. Manual Reset (Integral): –1500 to 1500 units. Construction/Enclosure: Structural foam Deviation Band Alarm: 1 to 3000 units. Auto Reset (Integral): 0.0–100.0 repeats/ minute. enclosure with plastic cover standard. Alarm Hysteresis: 0–300 units (width of Rate Derivative: 0.0–10.0 minutes. OPERATING CHARACTERISTICS hysteresis band). Cycle Time Output 1/Output 2: 1 to 240 seconds. Position Proportioning Sensitivity: 0.0–50.0%. Operating Temp: 32° to 122°F (0° to 50°C). INPUTS ON/OFF Hysteresis: 0–300 units (width of Storage Temp: –40° to 149°F (–40° to 65°C). hysteresis band). Thermocouple: J, K, T, R, S, B, C, E, N. Humidity: 0% to 90% non-condensing R.H. RTD: 100 ohm, platinum; 0.00385 ohms/ ohm/°C. First /Second Output Position: –1000 to 1000 Vibration: 0.5 to 100Hz @ 0.2g. units. Volts: 0–5 VDC or 1–5VDC. Electro Static Discharge: No effect from 5000V Control Action: Direct or Reverse. DC Millivolts: 0–25mV, 0–50mV or 10–50mV. static charge over the entire area. Automatic Transfer Function: User-selectable to DC Milliamps: 4–20mA or 0–20mA used with RFI: Degradation due to RF fields to recording transfer from manual to automatic control appropriate shunt resistor. and output accuracy to 8% at spot frequen- when setpoint is reached; can be disabled. cies in the range of 100–1000MHz. Remote Setpoint Input (optional): 0–5VDC, 1– Anti-Reset Windup: Auto-reset is disabled when 5VAC, 0–20mA, 4–20mA (recording controller the process is outside of the proportional band. only); accommodated with an internal 249 PROCESS ohm jumper selectable shunt resistor. Auto/Manual: Bumpless transfer. CONTROL Manual Output: 0–100%. Output Limiting: High/Low 0–100%. U L ® Setpoint Limiting: High/Low Limit: –9999 to 9999 units. LISTED 88BO Customer Service +1 800.390.6405 Technical Support +1 800.866.6659 www.partlow.com • www.danaherindustrialcontrols.com TM TM TM TM TM Process Automation Worldwide Brands: LFE • Partlow • PMA • Rustrak • West Recorders ™ MRC 7000 Proven Recording Reliability that Hollowshaft, Incremental Encoders Recorder/Controller/Profiler Became the Industry Standard! SPECIFICATIONS (Continued) PERFORMANCE (continued) OPTIONS/ACCESSORIES COMMUNICATIONS INTERFACES PROFILE PARAMETERS (optional): Choice of pen, thermocouple input and SSR Communications Port: RS-422/485 serial, driver outputs (see matrix for details). Programmable Profiles: 8 user-programmable half duplex. profiles. RS-485 communication option. Protocol: Partlow ASCII Segments: 1–6 segments per profile. 24V DC power supply option. Bit Rate: User-configurable 300, 600, 1200, Ramp and Soak: 1 ramp and soak per segment. 2400, 4800 or 9600/sec. 115 or 230VAC input option. Profile Time Base: User-selectable; Choose Address: User-configurable for each pen NEMA 3 protection optional; CE compliance from hours and tenths (HHH.T); hours and 0–99. optional. minutes (HH.MM) or minutes and seconds Enable Mode security system option. (MM.SS). RATINGS/AGENCY APPROVALS Profile Interruption Action: Upon return of AC Safety: UL 1092 File E67237; CSA Spec C22.2 power either go to OFF mode, continue WARRANTY File LR39885. profile, go to HOLD mode, or restart profile at Immunity: Optional CE compliance. beginning. 3 years. Other: ISO 9002 registered. Profile Loop Count: 1–9999; 0 = continuous. Profile End Control: User-selectable; hold at PROTECTION last setpoint; Abort (all outputs off or 0%); transfer to another profile. NEMA 3 enclosure optional; CE compliance Assured Soak: Deviation Hold after Ramp Up or optional. Down; 1–3000 units; 0 = No Auto Hold. Enable Mode security system option. Pen Profiling Configuration: Pen 1 only or Pen 1 and 2. PHYSICAL DIMENSIONS Remote Run/Hold (optional): User-selectable; Width: 15.13˝ (384mm). override Run/Hold key; allow Run/Hold key Depth: 3.63˝ (92mm). function. Height: 13.19˝ (335mm). Event Output(s): Up to 3 event outputs possible; each event can be set on or off for each Weight: 20 lbs (9.1kg). ramp and soak. Customer Service +1 800.390.6405 Technical Support +1 800.866.6659 www.partlow.com • www.danaherindustrialcontrols.com TM TM TM TM TM Process Automation Worldwide Brands: LFE • Partlow • PMA • Rustrak • West Recorders ™ MRC 7000 Recorder/Controller/Profiler Proven Recording Reliability that Became the Industry Standard! MODELS (Recorder Only) Code 10: Code 8: Code 9: Code 11: Code 1: Code 3: Code 4: Code 5: Code 6: Code 7: Code 2: Model Operating Option Pen 2 Relay (SPST) SSR Driver 4-20mA Transmitter Required Digital Enclosure Pen 1 Voltage Zeros Communications Options Suffix Outputs* Outputs* Outputs Power Supply 0 0 7 0 None 1 115VAC BLANK - None 0 None 0 None 0 None 0 None 0 None 2 Standard 1 Recorder MRC7000 Cover (Plastic Only 2 RS-485 2 115/230VAC N3 NEMA † Recorder 1 Recorder Only 1 One SPST 1 One 1 One Standard 1 24VDC Windows) Total Access 4 High or Regulated CSA APPROVED AW RTD 2 Two SPST 2 Two 2 Two Standard /Isolated 4 Door Lock** Low Depression 4 115VAC Limit†† 4 Four SPST 4 Four 3 Three Standard on Pen 2 6 Sealed Conduit 5 115/230VAC 6 Six SPST 6 Six 4 Four Standard AD 0/100 Connections mVDC 7 One SPDT 8 Eight Input 7 4 & 6 8 Two SPDT Combined** AE N3 plus 9 Two SPDT AW and CE CE Two SPST Compliance * Total quantity of SPST Relays and SSR Drivers must be less than or equal to eight. When SPDT Relays are NOTE: 4-20mA inputs are accommodated using the 1-5V input and a 250 ohm Shunt Resistor, P/N 64411701 or the 10-50mA input included, the total must be less than or equal to six. With Limit, only 1 selectable Alarm is available. and a 2.5 ohm Shunt Resistor, P/N 64411702 Order as Separate Line Item. ** This option comes with a structural foam cover. ††High/low limit device is Factory Mutual approved. †N3 - NEMA type protection for wet environments. Recorders ™ MRC 7000 Recorder/Controller/Profiler Proven Recording Reliability that Became the Industry Standard! MODELS (Recording Controller/Profiler) Code 12: Code 11: Code 13: Code 1: Code 2: Code 3: Code 4: Code 5: Code 6: Code 7: Code 8: Code 9: Code 10: Model Operating Pen 2 Relay (SPST) SSR Driver 4-20mA Transmitter Pen 1 Auxiliary Pen 2 Auxiliary Digital Enclosure Option Pen 1 Voltage Options Suffix Outputs* Outputs* Outputs Power Supply Input Input Communications 7 0 None 1 115VAC BLANK - None 0 None 0 None 0 None 0 None 0 None 0 None 0 None 2 Standard 2 Recording MRC7000 Cover (Plastic Controller 2 RS-485 2 115/230VAC 1 Recorder 1 One SPST 1 One 1 One N3 NEMA † Recording/ 1 24VDC 1 Position 1 Position Windows) Total Access Profile Only Standard Regulated Proportioning Proportioning 3 Recording CSA APPROVED 2 Two SPST 2 Two AW RTD Controller Profile /Isolated 4 Door Lock*** Depression 2 Recording 2 Two 2 Remote 2 Remote 4 115VAC Controller 4 Four SPST 4 Four Controller Standard Setpoint Setpoint 6 Sealed on Pen 2 5 115/230VAC 6 Six SPST 6 Six Conduit AD 0/100 3 Three 3 Remote Connections Standard mVDC 7 One SPDT 8 Eight Run/Hold** 7 4 & 6 Input 4 Four 8 Two SPDT Combined*** AE N3 plus Standard 9 Two SPDT AW and CE CE Two SPST Compliance †N3 - NEMA type protection for wet environments. * Total quantity of SPST Relays and SSR Drivers must be less than or equal to eight. When SPDT Relays are included, the total must be less than or equal to six. NOTE: 4-20mA inputs are accommodated using the 1-5V input and a 250 ohm Shunt Resistor, P/N 64411701 or the 10-50mA input and a 2.5 ohm Shunt Resistor, P/N ** Applies to Model 73XXXXXXXXXX. 64411702ea. Order as Separate Line Item. *** This option comes with a structural foam cover. Recorders ™ MRC 7000 Proven Recording Reliability that Became the Industry Standard! Hollowshaft, Incremental Encoders Recorder/Controller/Profiler DIMENSIONS EC1 2.5" (63.5 mm) (384.2 mm) 15.1" WIDTH OF COVER (65.9 mm) 2.6" 9 DIA.(7.1mm) 32 12.6" 7.5" (320.7 mm) (190.5 mm) Made in USA. (342.5 mm) 13.5" * Specifications subject to change without notice in accordance with our DBS policy of continuous improvement. All product and brand ( 354 mm) 13.9" names are trademarks of their respective companies. All rights reserved. Panel cut-out for flush mounting ™ ™ Partlow brand and MRC 7000 are trademarks of Danaher Industrial Controls Group. All rights reserved. © 2005 DICG Corp. Partlow Brand MRC 7000 Data Sheet (5/05) Headquarters: 1675 Delany Road • Gurnee, IL 60031-1282 • USA Phone: +1 847.662.2666 • Fax: +1 847.662.6633 Satellite Locations: North America: North Carolina, South Carolina, Connecticut, Massachusetts, New York, Customer Service: Technical Support: Canada, British Virgin Islands • Europe: United Kingdom, Italy, France, Germany, Spain, Slovakia • Latin America: Brazil • Asia: China, Japan, Korea, Singapore Tel.: +1.800.390.6405 Tel.: +1.800.866.6659 Fax: +1.910.879.5486 Fax: +1.847.782.5277 partlow.custserv@dancon.com partlow.techsupport@dancon.com www.partlow.com • www.danaherindustrialcontrols.com TM TM TM TM TM Process Automation Worldwide Brands: LFE • Partlow • PMA • Rustrak • West