= Wainbee stock (All others available for Quick Ship) Air Line Accessories LV Series Valves Operating Pressure Range 0 to 300 PSIG (0 to 2068 kPa) Port size Port size Part No. inlet & outlet (port 1 & 2) exhaust (port 3) Operating Temperature Range (Ambient) 3/8 3/4 LV3N6B 32°F to 175°F (0 to 80°C) 12 1/2 3/4 LV4N6B 3/4 3/4 LV6N6B 3/4 1-1/4 LV6NAB 3 1 2 1 1-1/4 LV8NAB 10 1-1/4 1-1/4 LVANAB Silencers sold separately Micrometer Flow Control Valves "337" Series 1/8" to 3" Port "337" Series ¹⁄₈" to ¾" Ports The "337" Series flow control valves are manufactured with a fine tapered needle providing precise flow control, even at low flow rates. The perimeter of the adjustment knob features numerical micrometer position markings providing a visual indi- cation of the setting. Once the desired flow is selected, a set screw can be tightened to maintain the setting. These valves are available with NPTF ports in 1/8", 1/4", 3/8", 1/2" and 3/4" sizes. This series is recommended for pneumatic service. Component Materials Body Material: Brass Knob: Aluminum Needle: Stainless steel Spring: Stainless steel Valve Specifications Check Seal: Urethane Retainer: Zinc-plated steel Needle Seals: Buna N Set Screw: Steel Maximum Operating Pressure (Viton optional) 250 PSI (1725 kPa) Cracking pressure for return check poppet – 1 to 2 PSIG (7 to 14 kPa) Port Size Flow (SCFM†) Model Adj. Free Flow Operating Temperature Standard: 0° to 180°F (-18° to 82°C) ¹⁄₈" NPT 00337 1000 15 32 Extended temperature: 0° to 300°F (-18° to 150°C) ¹⁄₄" NPT 00337 1001 28 75 (consult factory) ³⁄₈" NPT 00337 1002 59 139 * Ambient temperatures below freezing require moisture-free air. Ambient tem- ¹⁄₂" NPT 00337 1003 126 183 peratures below freezing and above 180°F require lubricants especially selected ³⁄₄" NPT 00337 1004 140 327 for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. † At 100 PSIG (690 kPa) inlet pressure with full pressure drop. Quick link to : Table of Contents Wainbee Pneumatic Quick Picks 20 = Wainbee stock (All others available for Quick Ship) Air Line Accessories Needle Valves "338" Series 1/8" to 3/4" Port The "338" Series needle valves bi-directionally meter the flow of air through the valve. This series features a fine tapered needle providing precise flow of air in both directions. Numerical micrometer position markings are stamped on the perimeter of the adjustment knob which pro- vide a visual indication of the setting. Once the desired flow is selected, a set screw can be tightened to maintain the setting. These valves are available with NPTF ports in 1/8", 1/4", 3/8", Component Materials 1/2" and 3/4" sizes. This series is recommended for pneumatic Body Material: Brass service. Internal Components: Stainless steel Seals: Nitrile (Viton® optional) Valve Specifications † Port Size Model Flow (SCFM) Maximum Operating Pressure 250 PSIG (1725 kPa) ¹⁄₈" NPT 00338 1100 15 ¹⁄₄" NPT 00338 1101 28 Operating Temperature Standard: 0° to 180°F (-18° to 82°C) ³⁄₈" NPT 00338 1102 59 Extended Temperature: 0° to 300°F (-18° to 150°C) optional ¹⁄₂" NPT 00338 1103 126 ³⁄₄" NPT 00338 1104 140 * Ambient temperatures below freezing require moisture-free air. Ambient tem- peratures below freezing and above 180°F require lubricants especially selected † At 100 PSIG (690 kPa) inlet pressure with full pressure drop. for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. Check Valves "339" Series 1/8" to 3/4" Port "339" Series check valves allow free flow in one direction and provide positive checked (zero flow) in the reverse direction. These valves are available with NPTF ports in 1/8", 1/4", 3/8", 1/2" and 3/4" sizes. This series is recommended for pneumatic service. Port Size † Valve Specifications Model Flow (SCFM) Maximum Operating Pressure 00339 3000 ¹⁄₈" NPT 35 250 PSIG (1725 kPa) ¹⁄₄" NPT 00339 3001 75 Cracking pressure: 1 to 2 PSIG (7 to 14 kPa) 00339 3002 ³⁄₈" NPT 143 Operating Temperature ¹⁄₂" NPT 00339 3003 162 Standard: 0° to 180°F (-18° to 80°C) 00339 3004 ³⁄₄" NPT 323 Extended Temperature: 0° to 300°F (-18° to 150°C) † At 100 PSIG (690 kPa) inlet pressure with full pressure drop. Component Materials Body Material: Brass Internal Components: Brass / Stainless steel / Zinc-plated steel Seals: Urethane (standard), ® Viton (optional) Quick link to : Table of Contents 21 Toll-Free: 1-888-WAINBEE (924-6233) www.wainbee.com = Wainbee stock (All others available for Quick Ship) Air Line Accessories BSL Series - Sintered Bronze Muffler/Filters Muffler/filters effectively reduce air exhaust noises to an Maximum Operating Pressure: industry accepted level with minimum flow restriction. They 250 PSIG (1725 kPa) – air protect valves, impact wrenches, screwdrivers and other air tools by preventing dirt and other foreign matter from entering Operating Temperature: the system. Non-corrosive, they can be cleaned with many 0° to 300°F (-18° to 150° C) common solvents. Pipe Thread Model Number ¹⁄₈" NPT BSL-N1 ¹⁄₄" NPT BSL-N2 ³⁄₈" NPT BSL-N3 ¹⁄₂" NPT BSL-N4 Breather Vents These low silhouette versions of the muffler/filter are useful Maximum Operating Pressure: where space is a problem and/or to prevent contamination. Use 250 PSIG (1725 kPa) – air for vacuum relief or pressure equalization in gear boxes, oil tanks, reservoirs, etc. Non-corrosive. Operating Temperature: Pipe Thread Model Number 0° to 300°F (-18° to 150° C) ¹⁄₈" NPT BSLM-N1 NOTE: Breather vents should not be used as exhaust mufflers. ¹⁄₄" NPT BSLM-N2 * Ambient temperatures below freezing require moisture-free air. Ambient temperatures ³⁄₈" NPT BSLM-N3 below freezing and above 180°F require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. ¹⁄₂" NPT BSLM-N4 ES Series Sillencer This silencer is designed to give superior performance in noise control with a minimum effect on air efficiency. "Trimline" design allows location in the tightest places without extra plumbing and fittings. Fits directly into the exhaust port of more than 90% of present commercial valves. Slotted body permits rapid discharge of air without undesirable back pressure. Unique nylon screen element resists dirt buildup or clogging. A D Maximum Operating Pressure: 250 PSIG (1725 kPa) – air Operating Temperature: NPT 0° to 300°F (-18° to 150° C) Model Number Dimensions (inch) Flow SCFM @ 100 PSIG Pipe Thread (700 kPa) inlet A D ¹⁄₈" NPT ES12MC 2.31 0.68 115 ¹⁄₄" NPT ES25MC 2.41 0.97 129 ³⁄₈" NPT ES37MC 3.06 1.38 219 ES50MC 3.19 1.38 549 ¹⁄₂" NPT ES75MC 4.69 1.62 893 ³⁄₄" NPT ES100MC 4.69 1.62 1013 1" NPT ES125MC 5.69 – 1486 1¹⁄₄" NPT 1¹⁄₂" NPT ES150MC 5.69 – 1580 Note: For conversion factors see page 54 Quick link to : Table of Contents Wainbee Pneumatic Quick Picks 22 = Wainbee stock (All others available for Quick Ship) Air Line Accessories Shuttle Valves 1/8" to 3/8" Ports ¹⁄₈" to ³⁄₈" Ports Shuttle valves determine a single pneumatic output from two separate inputs. If pressure is applied to both ports 1 simultaneously, the valve will select the port with the high 2 pressure. 3 Valve Specifications Maximum Operatering Pressure: 200 PSIG Maximum (1725 kPa) 3 PSIG (20 kPa) Minimum: Differential pressure Component Materials Operating Temperature: Body Material: Aluminum 0° to 160°F* (-18° to 70°C) Internal Components: Aluminum Seals: Nitrile Port Size Model Number Flow (C ) v ¹⁄₈" NPT N164 1001 0.32 * Ambient temperatures below freezing require moisture-free air. Ambient temperatures below freezing and above 180°F require lubricants especially selected for suitability at these N164 2003 1.65 ¹⁄₄" NPT temperatures. Pneumatic valves should be used with filtered and lubricated air. N164 3003 2.02 ³⁄₈" NPT "OR" Series – ¹⁄₈" thru ³⁄₄" Ports Quick Exhaust & Shuttle Valves "OR" Series - 1/8" thru 3/4" Ports (in) 1 Quick exhaust valves provide rapid exhaust of control air when placed between control valve and actuator. They can also be used as shuttle valves. Diaphragm materials are available in urethane, Nitrile, fluorocarbon, and PTFE to meet a wide variety of operating conditions. 2 Valve Specifications 3 (cylinder) Operating Pressure (Air) (exhaust) Maximum: 150 PSIG (1000 kPa) Component Materials Minimum: 3 PSIG (20 kPa) Body Material: Die cast aluminum Operating Temperature: Seals: Nitrile with urethane Urethane: 0° to 180°F* (-18° to 80°C) Diaphragm: Standard – Urethane ® ® ® Viton : 0°F to 400°F (-18° to 200°C) Optional – Viton , Teflon , ® Teflon : 0°F to 500°F (-18° to 260°C) or Nitrile (depending on size) Standard Urethane Diaphragm Note: This valve can be used as Port NPT Flow Model Number 1. Quick exhaust valve † (SCFM ) 2. Shuttle valve 1 2 3 NPTF 3. Positive seal check valve 70 OR12B ¹⁄₈" ¹⁄₈" ¹⁄₈" Please consult Wainbee (1-888-924-6233) for application 70 OR12NB ¹⁄₈" ¹⁄₄" information. 90 OR25B ¹⁄₄" ¹⁄₄" 150 OR25NB ¹⁄₄" ¹⁄₄" ³⁄₈" 240 OR25PB ³⁄₈" ³⁄₈" * Ambient temperatures below freezing require moisture-free air. Ambient 240 OR37B ³⁄₈" ³⁄₈" ³⁄₈" temperatures below freezing and above 180°F require lubricants especially 450 OR50B selected for suitability at these temperatures. Pneumatic valves should be used ¹⁄₂" ¹⁄₂" ¹⁄₂" with filtered and lubricated air. 550 OR75B ³⁄₄" ³⁄₄" ³⁄₄" † At 100 PSIG (690 kPa) inlet pressure with full pressure drop. Note: For conversion factors see page 54 Quick link to : Table of Contents 23 Toll-Free: 1-888-WAINBEE (924-6233) www.wainbee.com