Conforming to Conforming to OSHA / ANSI Approved Listing EMC Directive   Sensing surface Beam axis Reduces load on hands and fingers Prevents medical issues Two sets of external input indicators (two colors) are provided, so that the they can be used as operation indicators for a variety of purposes. SW-101: Turns off SW-101: Lights green Setting object SW-101: Lights orange Processing Dust will not accumulate. Fault indicator (Yellow) Uses a long-life Photo-MOS relay SPECIFICATIONS I/O CIRCUIT AND WIRING DIAGRAMS In case of Minus Common Optical touch switch Terminal No. Item Model No. SW-101 V Sensing method Thru-beam type photoelectric sensor (2 beam axes) Switching terminal of time-out function ( V) CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, Input of time-out Applicable standard function (IN) EN 60947-5-2 (EMC only) Output 1_1 Power supply 12 to 24 V DC 10%, Ripple P-P10 % or less Output 1_2 Current consumption 100 mA or less (excluding external connection load) Output 2_1 Semiconductor Photo-MOS relay output 3 Output 2_2 • Maximum load current: 100 mA Output 3_1 Output • Applied voltage: 30 V DC or less (between output and V) Output 3_2 • Residual voltage: 1.5 V or less (at 100 mA of load current) 0 V 1 External input 1 External input 2 Internal circuit Users’ circuit Incorporated 1 Response time Non-voltage contact or NPN open-collector transistor, PNP Time-out function open-collector transistor External input or or Green LED (Lights up when the power is ON) Green LED (Lights up when an object is detected) Green LED (Lights up when external input 1 is valid) Orange LED (Lights up when external input 2 is valid) Yellow LED (Blinks or lights up when fault occurs) In case of Plus Common Terminal No. Protection IP65 (IEC) TYPE1 (UL 50) (Excluding terminal part) V Switching terminal of time-out function ( V) Input of time-out function (IN) Ambient humidity 30 to 85 % RH, Storage: 30 to 85 % RH Output 1_1 Incandescent light: 3,000 x at the light-receiving face Output 1_2 Output 2_1 Output 2_2 Output 3_1 Shock resistance Output 3_2 Connector 3.5 mm 0.138 in pitch, 2-level socket: 12 pins 0 V 1 External input 1 External input 2 2 Cables 0.2 to 1.5 mm [including single wire or ferrule (sleeve)] Internal circuit Users’ circuit 2 Up to 20 m 65.617 ft (for cables less than 0.2 to 0.3 mm ) 1 2 Up to 100 m 328.084 ft (for cables from 0.3 to 1.5 mm ) Non-voltage contact or NPN open-collector transistor, PNP Enclosure: Polycarbonate, Polyester, Nut: PBT., Material open-collector transistor O-ring: Silicone rubber Weight Net weight: 130 g approx. Gross weight: 200 g approx. or or Note: Where measurement conditions have not been speci ed precisely, the conditions used were ambient temperature 23 C 73.4 F. OPTIONS Terminal arrangement diagram Designation Model No. Description Terminal No. Tool for tightening mounting nuts with a 1 2 3 4 5 6 SW-MT1 commercially-available wrench. 7 8 9 Protects the sensing surface from dirt SW-PS1 and scratches. PRECAUTIONS FOR PROPER USE Time-out function • • • • • • • 10 sec. or more • ON OUT 1 OFF 7 8 ON OUT 2 OFF ON OUT 3 OFF Mounting • Fasten a mounting nut (accessory) from Others the reverse side of the mounting plate. Main body (Note 2) The tightening torque should be 2 to 3N·m. Notes: 1) Make sure to use the attached mounting packing, or waterproof property will be invalid. 2) A mounting tool (SW-MT1) for fastening the mounting nut is available separately. The shape of fastening part of SW-MT1 is M10 nut. DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website: http://www.sunx.jp/ Note: The panel thickness should be 3 mm 0.118 in or less. All information is subject to change without prior notice. SUNX Limited 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Phone: +81-(0)568-33-7211 FAX: +81-(0)568-33-2631 Overseas Sales Dept. Phone: +81-(0)568-33-7861 http://www.sunx.jp/ FAX: +81-(0)568-33-8591 Printed on 100% recycled paper PRINTED IN JAPAN No.CE-SW101-5 March, 2007