DATA SHEET PB16H Rack Form 0452-110527 PB16H Rack Features Accommodates any combination of 16 Standard single-channel digital I/O modules. Uses a 50-pin header connector for easy connection to Optomux (B1), Pamux (B5), or Mistic (B100) protocol brain boards. Description PB16H Rack The PB16H I/O mounting rack can accommodate any combination of 16 Standard single-channel digital I/O modules. The PB16H I/O mounting rack uses a 50-pin header connector for easy connection to Optomux (B1), Pamux (B5), or Mistic (B100) protocol brain boards. Part Numbers Part Description PB16H 16-channel rack with header connector Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com PAGE SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com 1 © 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PB16H Rack Specifications 0 to 70 °C Operating 95% Relative Humidity Temperature Non-condensing Interface Connectors Field 6-32 Screw Terminals Control 50-conductor Header Connector Power 2-position Screw Terminal or Opto 22 PBSA/B/C Power Supply . Dimensions PB16H with B1 Brain Board Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com PAGE SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com 2 © 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET PB16H Rack Form 0452-110527 DATA SHEET PB16H Rack Form 0452-110527 PB16H Rack Connections Control Field Control Field Module Module (Header (Terminal (Header (Terminal Position Position Connector) Strip) Connector) Strip) 047 1 & 2 8 31 17 & 18 145 3 & 4 9 29 19 & 20 243 5 & 6 10 27 21 & 22 341 7 & 8 11 25 23 & 24 439 9 & 10 12 23 25 & 26 5 37 11 & 12 13 21 27 & 28 635 13 & 14 14 19 29 & 30 733 15 & 16 15 17 31 & 32 1. Even pins on control connector are connected by etch to common. 2. +VCC and return connected to two-point terminal strips marked “+5V” and “GND”. 3. At each module position on the field terminal strip, the lower number is always con- nected to pin 1 of the I/O module. Schematics PB16H Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com PAGE SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com 3 © 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. More About Opto 22 SNAP PAC Brains Products While SNAP PAC controllers provide central control and data Opto 22 develops and manufactures reliable, flexible, easy-to- distribution, SNAP PAC brains provide distributed intelligence use hardware and software products for industrial automation, for I/O processing and communications. Brains offer analog, remote monitoring, and data acquisition applications. digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital SNAP PAC System counting (up to 20 kHz), quadrature counting, TPO, and pulse Designed to simplify the typically complex process of generation and measurement. understanding, selecting, buying, and applying an automation SNAP I/O system, the SNAP PAC System I/O provides the local connection to sensors and equipment. consists of four integrated Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per components: module, depending on the type of module and your • SNAP PAC controllers ™ needs. Analog, digital, serial, and special-purpose • PAC Project Software Suite modules are all mixed on the same mounting rack and • SNAP PAC brains ™ controlled by the same processor (SNAP PAC brain or • SNAP I/O rack-mounted controller). SNAP PAC Controllers Programmable automation Quality controllers (PACs) are multifunctional, Founded in 1974 and with over 85 million devices multidomain, modular controllers sold, Opto 22 has established a worldwide reputation based on open standards and providing an for high-quality products. All are made in the U.S.A. at integrated development environment. our manufacturing facility in Temecula, California. Opto 22 has been manufacturing PACs for many years. The Because we do no statistical testing and each part is tested latest models include the standalone SNAP PAC S-series and twice before leaving our factory, we can guarantee most solid- the rack-mounted SNAP PAC R-series. Both handle a wide state relays and optically isolated I/O modules for life. range of digital, analog, and serial functions and are equally suited to data collection, remote monitoring, process control, and discrete and hybrid manufacturing. Free Product Support SNAP PACs are based on open Ethernet and Internet Protocol Opto 22’s Product Support Group offers free, comprehensive (IP) standards, so you can build or extend a system without the technical support for Opto 22 products. Our staff of support expense and limitations of proprietary networks and engineers represents decades of training and experience. protocols. Product support is available in English and Spanish, by phone or email, Monday through Friday, 7 a.m. to 5 p.m. PST. PAC Project Software Suite Opto 22’s PAC Project Software Suite provides full-featured Free Customer Training and cost-effective control programming, HMI (human machine interface) development and runtime, OPC server, and Hands-on training classes for the SNAP PAC System are offered database connectivity software to power your SNAP PAC at our headquarters in Temecula, California. Each student has System. his or her own learning station; classes are limited to nine These fully integrated software applications share a single students. Registration for the free training class is on a first- tagname database, so the data points you configure in PAC come, first-served basis. See our website, www.opto22.com, ™ ™ Control are immediately available for use in PAC Display , for more information or email training@opto22.com. ™ ™ OptoOPCServer , and OptoDataLink . Commands are in plain English; variables and I/O point names are fully descriptive. Purchasing Opto 22 Products PAC Project Basic offers control and HMI tools and is free for Opto 22 products are sold directly and through a worldwide download on our website, www.opto22.com. PAC Project network of distributors, partners, and system integrators. For Professional, available for separate purchase, adds more information, contact Opto 22 headquarters at 800-321- OptoOPCServer, OptoDataLink, options for Ethernet link 6786 or 951-695-3000, or visit our website at redundancy or segmented networking, and support for legacy ™ www.opto22.com. Opto 22 serial mistic I/O units. www.opto22.com www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-090113 SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com © 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.