R A HIGHER LEVEL OF CONFIDENCE ® OnLine 6-Series Communication Line Protectors: Some face persistent system problems, despite their use of conventional communication line protectors. Others face performance expectations that allow zero tolerance for downtime. 6-Series communication line protectors are specifically engineered to satisfy these demanding applications, whether for analog or digital lines. Ultimate assurance of system reliability Leading telecommunications companies employ ONEAC OnLine communication line protectors in their installations for good reason: because OnLine protectors provide greater assurance of PBX and key system uptime and lower service costs than conventional protectors. Patented SwitchedFilter™ technology System lockups, dropped calls, mis-dials, system memory loss, “no trouble found” service calls, service outages, shortened component life — these problems result from high frequency interference. • Robust/solid state overvoltage protection: last longer in the field ONEAC OnLine protectors with patented • Patented SwitchedFilter technology: allows exceptionally low let-through SwitchedFilter technology have the unique ability to performance for optimum protection of electronic systems discriminate between harmful and desired signals. This • Self-resetting sneak current protection: eliminates overcurrent allows OnLine protectors to prevent fast-edged transients from entering your system, yet allow lower problems without creating unnecessary fuse replacements frequency ring voltages and lower voltage voice and • Convenient test points: for faster, easier line testing data signals to pass through unobstructed. • 100 A surge impulse design: provides longer lasting protection • 5-year warranty: the best assurance of product quality ad performance in Last longer on the job the industry ONEAC communication line protectors feature a more robust design than others so they’re better able to • Models available for analog, digital and data lines withstand current and voltage surges. They also • UL Listed Secondary (497A), cUL include self-resetting sneak current protection — that eliminates the cost and downtime of replacement due • UL Listed Primary (497) to nuisance failures. Proven to reduce service costs Easily mountable on standard By removing electrical transients, ONEAC improves 66 blocks, OnLine provides more system reliability. Look at actual evidence — installers complete and longer lasting switching over to a protection scheme using OnLine protection than conventional protectors with ONEAC power conditioners report communication line protectors. an over 50% reduction in total trouble calls; 83% fewer service calls due to hardware problems; 70% fewer system resets; and 43% fewer calls in which no trouble was found. A Chloride Power Protection Company R A HIGHER LEVEL OF CONFIDENCE OnLine 6-Series Communication Line Protector: Specifications ONEAC Breaks the “Ring Voltage Barrier” Conventional protectors (gas tube or solid state) are designed to COMPARISON OF PROTECTION TECHNOLOGIES clamp above the operating DC bias and the ring voltage level. The OnLine’s ability to differentiate signals based on frequency permits 1000 the desired signals to pass while preventing transients from damaging semiconductor-based electronics. GAS TUBE For analog, Digital or ISDN Service For use with type 66 block M1-50, 6-Series communication line SOLID STATE protectors eliminate the possibility for noise generated on outside telephone lines to enter internal communication circuits. DC BIAS & OnLine Application Model/Part No. Color RING VOICE DATA T CARRIER ADSL: Standard ADSL Services 0 with associated POTS 6-AD Yellow FREQUENCY (Khz) 1000 Analog: Standard Service — Trunk Lines, Analog OPX Stations with Ring Signal 6-AP Black DISRUPTION DEGRADATION DESTRUCTION Gradient Shading of Semiconductor Vulnerability Digital: ISDN 6-DP Yellow T1: Standard Analog Lines and T1 Lines 6-DC Blue Ground Bar: required for each 350-032 — 66 block (supports up to 25 protectors) Model 6-AD 6-AP 6-DP 6-DC Impulse (Limiting Voltage) Performance: Impulse input @ 10/1000 uS, 1.5 kV, 100 A A. Impulse applied to input A or B in reference to earth and measured at outputs A or B in reference to earth Let-through Voltage (typical/maximum) 310 V/350 V 320 V/370 V 78 V/95 V 320 V/370 V B. Impulse applied between inputs A and B, and measured between outputs A and B Let-through Voltage (typical/maximum) 180 V/230 V 150 V/250 V 70 V/105 V 150 V/250 V DC Breakdown (Limiting) Voltage Range: 0-1 kV @ 100 V/S A or B in reference to earth (typical/range) 310 V/270-350 V 320 V/270-370 V 78 V/60-95 V 320 V/270-370 V A to B (typical/range) 310 V/270-350 V 640 V/540-740 V 155 V/120-190 V 640 V/540-740 V Module Loop Resistance @ 25°C (each leg) in ohms 3 min, 6 max 12 min, 18 max 3 min, 6 max 12 min, 18 max Holding Current‡150 mA‡150 mA‡150 mA‡150 mA Response Time <1ns <1ns <1ns <1ns Insulation Resistance @ 50 VDC >100M ohms >100M ohms >100M ohms >100M ohms Capacitance Line to Earth @ 50 VDC, 1 VAC, 10 kHz – 1 MHz A or B in reference to earth: <75pf <200pf <200pf <200pf A to B: <150pf <200pf <200pf <200pf On-State Voltage @ 1 A: <5 V <5 V <5 V <5 V Overcurrent Protection (Sneak Current) @ 25°C Self resetting (ceramic PTC technology) 300 mA 300 mA 300 mA 300 mA Non-resetting (time delay fuse) 1.1 A 1 A 1 A 1 A Color Code Yellow Black Yellow Blue Test Points Yes Yes Yes Yes ONEAC and OnLine are registered trademarks and SwitchedFilter is a trademark of ONEAC Corporation. All other trademarks, product and corporate names are the property of their ONEAC is a UL/BSI respective owners. registered corporation — Certification No. A2900 A Chloride Power Protection Company (800) 327 8801 Option 2 in USA AND CANADA +44 (0) 1235 534721 in UK AND EUROPE 27944 N. Bradley Road, Libertyville, IL 60048 Phone 847 816-6000 FAX 847 680-5124 George Curl Way, Southampton, Hampshire SO18 2RY, UK FAX +44 (0) 1235 534197 www.oneac.com All specifications subject to change without notice. © 2002 ONEAC Corporation Printed in U.S.A. Part # 917-028 Rev. F LET-THROUGH VOLTAGE (Volts)