OMRON SS-5-FD

Subminiature Basic Switch SS Subminiature Basic Switch Offers Long Life and High Reliability ■ A design that combines simplicity and stability by the use of two split springs ensures a long durabil- ity of 30,000,000 operations. ■ A variety of models are available, with operating force ranging from low to high. ■ Available by 10.1 A, 5 A, and 0.1 A models. RoHS Compliant Ordering Information ■ Model Number Legend SS-@@@@@@ 1 2 3 4 5 6 1. Ratings 4. Contact Form 10: 10.1 A at 125 VAC None: SPDT 5: 5 A at 125 VAC -2: SPST-NC 01: 0.1 A at 30 VDC -3: SPST-NO 2. Actuator 5. Terminals None: Pin plunger None: Solder terminals GL: Hinge lever T: Quick-connect terminals (#110) GL13: Simulated roller lever D: PCB terminals (see note 2) GL2: Hinge roller lever 6. Special Code 3. Maximum Operating Force (see note 1) None: Standard (85°C) None: 1.47 N {150 gf} -T: Heat resistive (120°C) -F: 0.49 N {50 gf} (0.1 A, 5 A) -E: 0.25 N {25 gf} (0.1 A) Note: These values are for pin plunger models. 1 SS SS ■ List of Models Standard Models Actuator Terminal Contact Rating 10.1 A 5 A 0.1 A Form OF max. Pin plunger Solder terminal SPDT 1.47 N {150 gf} SS-10 SS-5 SS-01 SPST-NC SS-10-2 SS-5-2 SS-01-2 CPST-NO SS-10-3 SS-5-3 SS-01-3 Quick-connect SPDT SS-10T SS-5T SS-01T terminal (#110) SPST-NC SS-10-2T SS-5-2T SS-01-2T CPST-NO SS-10-3T SS-5-3T SS-01-3T PCB terminal SPDT SS-10D SS-5D SS-01D SPST-NC SS-10-2D SS-5-2D SS-01-2D CPST-NO SS-10-3D SS-5-3D SS-01-3D Solder terminal SPDT 0.49 N {50 gf} --- SS-5-F SS-01-F SPST-NC --- SS-5-F-2 SS-01-F-2 CPST-NO --- SS-5-F-3 SS-01-F-3 Quick-connect SPDT --- SS-5-FT SS-01-FT terminal (#110) SPST-NC --- SS-5-F-2T SS-01-F-2T CPST-NO --- SS-5-F-3T SS-01-F-3T PCB terminal SPDT --- SS-5-FD SS-01-FD SPST-NC --- SS-5-F-2D SS-01-F-2D CPST-NO --- SS-5-F-3D SS-01-F-3D Solder terminal SPDT 0.25 N {25 gf} --- --- SS-01-E SPST-NC --- --- SS-01-E-2 CPST-NO --- --- SS-01-E-3 Quick-connect SPDT --- --- SS-01-ET terminal (#110) SPST-NC --- --- SS-01-E-2T CPST-NO --- --- SS-01-E-3T PCB terminal SPDT --- --- SS-01-ED SPST-NC --- --- SS-01-E-2D CPST-NO --- --- SS-01-E-3D Hinge lever Solder terminal SPDT 0.49 N {50 gf} SS-10GL SS-5GL SS-01GL SPST-NC SS-10GL-2 SS-5GL-2 SS-01GL-2 CPST-NO SS-10GL-3 SS-5GL-3 SS-01GL-3 Quick-connect SPDT SS-10GLT SS-5GLT SS-01GLT terminal (#110) SPST-NC SS-10GL-2T SS-5GL-2T SS-01GL-2T CPST-NO SS-10GL-3T SS-5GL-3T SS-01GL-3T PCB terminal SPDT SS-10GLD SS-5GLD SS-01GLD SPST-NC SS-10GL-2D SS-5GL-2D SS-01GL-2D CPST-NO SS-10GL-3D SS-5GL-3D SS-01GL-3D Solder terminal SPDT 0.16 N {16 gf} --- SS-5GL-F SS-01GL-F SPST-NC --- SS-5GL-F-2 SS-01GL-F-2 CPST-NO --- SS-5GL-F-3 SS-01GL-F-3 Quick-connect SPDT --- SS-5GL-FT SS-01GL-FT terminal (#110) SPST-NC --- SS-5GL-F-2T SS-01GL-F-2T CPST-NO --- SS-5GL-F-3T SS-01GL-F-3T 2 SS SS Actuator Terminal Contact Rating 10.1 A 5 A 0.1 A Form OF max. Hinge lever PCB terminal SPDT 0.16 N {16 gf} --- SS-5GL-FD SS-01GL-FD SPST-NC --- SS-5GL-F-2D SS-01GL-F-2D CPST-NO --- SS-5GL-F-3D SS-01GL-F-3D Solder terminal SPDT 0.08 N {8 gf} --- --- SS-01GL-E SPST-NC --- --- SS-01GL-E-2 CPST-NO --- --- SS-01GL-E-3 Quick-connect SPDT --- --- SS-01GL-ET terminal (#110) SPST-NC --- --- SS-01GL-E-2T CPST-NO --- --- SS-01GL-E-3T PCB terminal SPDT --- --- SS-01GL-ED SPST-NC --- --- SS-01GL-E-2D CPST-NO --- --- SS-01GL-E-3D Simulated roller lever Solder terminal SPDT 0.49 N {50 gf} SS-10GL13 SS-5GL13 SS-01GL13 SPST-NC SS-10GL13-2 SS-5GL13-2 SS-01GL13-2 CPST-NO SS-10GL13-3 SS-5GL13-3 SS-01GL13-3 Quick-connect SPDT SS-10GL13T SS-5GL13T SS-01GL13T terminal (#110) SPST-NC SS-10GL13-2T SS-5GL13-2T SS-01GL13-2T CPST-NO SS-10GL13-3T SS-5GL13-3T SS-01GL13-3T PCB terminal SPDT SS-10GL13D SS-5GL13D SS-01GL13D SPST-NC SS-10GL13-2D SS-5GL13-2D SS-01GL13-2D CPST-NO SS-10GL13-3D SS-5GL13-3D SS-01GL13-3D Solder terminal SPDT 0.16 N {16 gf} --- SS-5GL13-F SS-01GL13-F SPST-NC --- SS-5GL13-F-2 SS-01GL13-F-2 CPST-NO --- SS-5GL13-F-3 SS-01GL13-F-3 Quick-connect SPDT --- SS-5GL13-FT SS-01GL13-FT terminal (#110) SPST-NC --- SS-5GL13-F-2T SS-01GL13-F-2T CPST-NO --- SS-5GL13-F-3T SS-01GL13-F-3T PCB terminal SPDT --- SS-5GL13-FD SS-01GL13-FD SPST-NC --- SS-5GL13-F-2D SS-01GL13-F-2D CPST-NO --- SS-5GL13-F-3D SS-01GL13-F-3D Solder terminal SPDT 0.08 N {8 gf} --- --- SS-01GL13-E SPST-NC --- --- SS-01GL13-E-2 CPST-NO --- --- SS-01GL13-E-3 Quick-connect SPDT --- --- SS-01GL13-ET terminal (#110) SPST-NC --- --- SS-01GL13-E-2T CPST-NO --- --- SS-01GL13-E-3T PCB terminal SPDT --- --- SS-01GL13-ED SPST-NC --- --- SS-01GL13-E-2D CPST-NO --- --- SS-01GL13-E-3D 3 SS SS Actuator Terminal Contact Rating 10.1 A 5 A 0.1 A Form OF max. Hinge roller lever Solder terminal SPDT 0.49 N {50 gf} SS-10GL2 SS-5GL2 SS-01GL2 SPST-NC SS-10GL2-2 SS-5GL2-2 SS-01GL2-2 CPST-NO SS-10GL2-3 SS-5GL2-3 SS-01GL2-3 Quick-connect SPDT SS-10GL2T SS-5GL2T SS-01GL2T terminal (#110) SPST-NC SS-10GL2-2T SS-5GL2-2T SS-01GL2-2T CPST-NO SS-10GL2-3T SS-5GL2-3T SS-01GL2-3T PCB terminal SPDT SS-10GL2D SS-5GL2D SS-01GL2D SPST-NC SS-10GL2-2D SS-5GL2-2D SS-01GL2-2D CPST-NO SS-10GL2-3D SS-5GL2-3D SS-01GL2-3D Solder terminal SPDT 0.16 N {16 gf} --- SS-5GL2-F SS-01GL2-F SPST-NC --- SS-5GL2-F-2 SS-01GL2-F-2 CPST-NO --- SS-5GL2-F-3 SS-01GL2-F-3 Quick-connect SPDT --- SS-5GL2-FT SS-01GL2-FT terminal (#110) SPST-NC --- SS-5GL2-F-2T SS-01GL2-F-2T CPST-NO --- SS-5GL2-F-3T SS-01GL2-F-3T PCB terminal SPDT --- SS-5GL2-FD SS-01GL2-FD SPST-NC --- SS-5GL2-F-2D SS-01GL2-F-2D CPST-NO --- SS-5GL2-F-3D SS-01GL2-F-3D Solder terminal SPDT 0.08 N {8 gf} --- --- SS-01GL2-E SPST-NC --- --- SS-01GL2-E-2 CPST-NO --- --- SS-01GL2-E-3 Quick-connect SPDT --- --- SS-01GL2-ET terminal (#110) SPST-NC --- --- SS-01GL2-E-2T CPST-NO --- --- SS-01GL2-E-3T PCB terminal SPDT --- --- SS-01GL2-ED SPST-NC --- --- SS-01GL2-E-2D CPST-NO --- --- SS-01GL2-E-3D Heat resistive models Actuator Terminal Contact Rating 10.1 A 5 A 0.1 A Form OF max. Pin plunger Solder terminal SPDT 1.47 N {150 gf} SS-10-T SS-5-T SS-01-T Quick-connect SS-10T-T SS-5T-T SS-01T-T PCB terminal SS-10D-T SS-5D-T SS-01D-T Hinge lever Solder terminal 0.49 N {50 gf} SS-10GL-T SS-5GL-T SS-01GL-T Quick-connect SS-10GLT-T SS-5GLT-T SS-01GLT-T PCB terminal SS-10GLD-T SS-5GLD-T SS-01GLD-T Simulated roller lever Solder terminal 0.49 N {50 gf} SS-10GL13-T SS-5GL13-T SS-01GL13-T Quick-connect SS-10GL13T-T SS-5GL13T-T SS-01GL13T-T PCB terminal SS-10GL13D-T SS-5GL13D-T SS-01GL13D-T Hinge roller lever Solder terminal 0.49 N {50 gf} SS-10GL02-T SS-5GL02-T SS-01GL02-T Quick-connect SS-10GL02T-T SS-5GL02T-T SS-01GL02T-T PCB terminal SS-10GL02D-T SS-5GL02D-T SS-01GL02D-T 4 SS SS Specifications ■ Ratings Item Resistive load Model Rated voltage SS-10 250 VAC 10.1 A SS-5 125 VAC 5 A 250 VAC 3 A SS-01 125 VAC 0.1 A 30 VDC 0.1 A Note: The ratings values apply under the following test condi- tions: Ambient temperature: 20±2°C Ambient humidity: 65±5% Operating frequency: 30 operations/min ■ Characteristics Operating speed 0.1 mm to 1 m/s (pin plunger models) Operating frequency Mechanical:400 operations/min max. Electrical:30 operations/min max. Insulation resistance 100 MΩ min. (at 500 VDC) Contact resistance OF 1.47 N {150 gf}: SS-10, SS-5 models:30 mΩ max. (initial value) SS-01 models:50 mΩ max. OF 0.49 N {50 gf}: SS-5 models:50 mΩ max. SS-01 models:100 mΩ max. OF 0.25 N {25 gf}: SS-01 models:150 mΩ max. Dielectric strength 1,000 VAC (600 VAC for SS-01 models), 50/60 Hz for 1 min between terminals of the same polarities (see note 2) 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal part and ground, and between each ter- minal and non-current-carrying metal part Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude (see note 3) 2 Shock resistance Destruction: OF 1.47 N {150 gf}:1,000 m/s {approx. 100G} max. (see note 4) 2 OF 0.25 N {25gf}/0.49 N {50 gf}:500 m/s {approx. 50G} max. 2 Malfunction: OF 1.47 N {150 gf}:300 m/s {approx. 30G} max. 2 OF 0.25 N {25 gf}/0.49 N {50 gf}:200 m/s {approx. 20G} max. Durability (see note 5) Mechanical: 30,000,000 operations min. (60 operations/min) (Refer to the following Engineering Data.) 10,000,000 operations min. (60 operations/min) for SS-10 models Electrical: 200,000 operations min. (30 operations/min) (Refer to the following Engineering Data.) 50,000 operations min. (30 operations/min) for SS-10 models Degree of protection IEC IP40 Degree of protection against Class I electrical shock Proof Tracking Index (PTI) 175 Ambient operating tempera- –25°C to 85°C (at ambient humidity of 60% max.) (with no icing or condensation) ture Ambient operating humidity 85% max. (for 5°C to 35°C) Weight Approx. 1.6 g (pin plunger models) Note: 1. The data given above are initial values. 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models, they apply at the total travel position. 4. Lever-type models: Total travel position (with a contact separation time of 1 ms max.) 5. For testing conditions, contact your OMRON sales representative. 5 SS SS ■ Approved Standards ■ Contact Specifications Consult your OMRON sales representative for specific models Item SS-10 SS-5 SS-01 with standard approvals. Contact Specification Rivet Crossbar UL1054 (File No. E41515)/CSA C22.2 No. 55 (File Material Silver alloy Silver Gold alloy No. LR21642) Gap (standard 0.5 mm 0.25 mm value) Rated voltage SS-10 SS-5 SS-01 Inrush NC 20 A max. 1 A max. 125 VAC --- 5 A 0.1 A current 250 VAC 10.1 A 3 A --- NO 15 A max. 10 A max. 1 A max. 30 VDC --- --- 0.1 A Minimum applicable load 160 mA at 5 VDC 1 mA (see note) at 5 VDC EN61058-1 (File No. 129246 for SS-5, 125256 for SS-10, VDE approval) Note: For more information on the minimum applicable load, refer to Using Micro Loads on page 9. Rated voltage SS-10 SS-5 250 VAC 10 A 5 A ■ Contact Form Testing conditions: 5E4 (50,000 operations); T85 (0°C to 85°C). SPST-NO SPDT SPST-NC Dimensions Note: All units are in millimeters unless otherwise indicated. ■ Terminals Terminal plate thickness is 0.5 mm for all models. Solder Terminals Quick-connect Terminals (#110) PCB Terminals 0.6 2.9 3.3 2.9 2.9 7.0 6.4 10.6 7.1 1.6 0.5 1.6 3.2 8.8 7.3 1.2 2.8 8.8 7.3 1.6 9.5±0.1 COM Three, 1.6-dia. holes 8.8 7.3 COM terminal 3.2 6.4 9.5±0.1 3.2 terminal 19.8 9.5±0.1 t = 0.5 (C) COM terminal (C) Three, 1.2 dia. (C) 19.8 19.8 NO terminal NC terminal NO terminal NO terminal NC terminal NC terminal PCB Mounting Dimensions (Reference) Three, 1.35 to 1.5 dia. (1.6) +0.15 8.8 −0.05 16.1±0.1 ■ Mounting Holes Two, 2.4-dia. mounting holes or M2.3 screw holes 9.5 ± 0.1 6 SS SS ■ Dimensions and Operating Characteristics Note: 1. All units are in millimeters unless otherwise indicated. 2. The following illustration and drawing are for solder terminal models. Refer to page 6 for details on models with quick-connect terminals (#110) or PCB terminals. 3. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. 4. The operating characteristics are for operation in the A direction ( ). Pin Plunger Models 7.5 PT 3.2 SS-10 2 SS-5(-F) A +0.075 SS-01(-F, -E) +0.075 2.35 2.35-0.05 −0.05 OP 10.2 9.5 2.9 2.5 6.4 6.4 +0.075 +0.075 2.5±0.07 dia. 2.35 3.2 2.35 dia. holes -0.05 −0.05 dia. holes Three, 1.6 dia. 1.6 6.4 8.8 7.3 5.1 9.5±0.1 19.8 Model SS-10 SS-5 SS-5-F SS-01-E SS-01 SS-01-F OF max. 1.47 N {150 gf} 1.47 N {150 gf} 0.49 N {50 gf} 0.25 N {25 gf} RF min. 0.25 N {25 gf} 0.25 N {25 gf} 0.04 N {4 gf} 0.02 N {2 gf} PT max. 0.6 mm 0.5 mm 0.5 mm 0.5 mm OT min. 0.4 mm 0.5 mm 0.5 mm 0.5 mm MD max. 0.12 mm 0.1 mm 0.1 mm 0.1 mm OP 8.4±0.5 mm Hinge Lever Models A 14.5 (see note 2) 3.6 t = 0.3 SS-10GL (see note 1) (see note 1) SS-5GL(-F) SS-01GL(-F, -E) +0.075 FP +0.075 2.35 OP 2.35−0.05 -0.05 10.2 9.5 2.9 2.5 6.4 +0.075 +0.075 2.5±0.07 dia. 2.35 2.35-0.05 dia. holes −0.05 dia. holes 3.2 Three, 1.6 dia. 1.6 6.4 8.8 7.3 5.1 9.5±0.1 19.8 Note: 1. Stainless-steel lever 2. Besides the SS-@GL models with a hinge lever length of 14.5, the SS-@GL11 models with a hinge lever length of 18.5, the SS-@GL111 models with a hinge lever length of 22.6, and the SS-@GL1111 models with a hinge lever length of 37.8 are available. Contact your OMRON representative for these models Model SS-10GL SS-5GL SS-5GL-F SS-01GL-E SS-01GL SS-01GL-F OF max. 0.49 N {50 gf} 0.49 N {50 gf} 0.16 N {16 gf} 0.08 N {8 gf} RF min. 0.06 N {6 gf} 0.06 N {6 gf} 0.02 N {2 gf} 0.01 N {1 gf} (reference value) OT min. 1.0 mm 1.2 mm 1.2 mm 1.2 mm MD max. 1.0 mm 0.8 mm 0.8 mm 0.8 mm FP max. 13.6 mm OP 8.8±0.8 mm Note: The values indicated in parentheses are reference values for cases when the installation direction is such that the lever weight is not applied to the plunger. 7 SS SS Simulated Roller Lever Models A 15.8 1.3R 3.6 1.3R t = 0.3 SS-10GL13 (see note) SS-5GL13(-F) SS-01GL13(-F, -E) FP +0.075 OP +0.075 2.35 2.35−0.05 -0.05 9.5 10.2 2.9 2.5 6.4 +0.075 +0.075 2.5±0.07 dia. 2.35 -0.05 dia. holes 2.35 3.2 Three, 1.6 dia. −0.05 dia. holes 1.6 6.4 8.8 7.3 Note: Stainless-steel spring lever 5.1 9.5±0.1 19.8 Model SS-10GL13 SS-5GL13 SS-5GL13-F SS-01GL13-E SS-01GL13 SS-01GL13-F OF max. 0.49 N {50 gf} 0.49 N {50 gf} 0.16 N {16 gf} 0.08 N {8 gf} RF min. 0.06 N {6 gf} 0.06 N {6 gf} 0.02 N {2 gf} 0.01 N {1 gf} (reference value) OT min. 1.0 mm 1.2 mm 1.2 mm 1.2 mm MD max. 1.0 mm 0.8 mm 0.8 mm 0.8 mm FP max. 15.5 mm OP 10.7±0.8 mm Note: The values indicated in parentheses are reference values for cases when the installation direction is such that the lever weight is not applied to the plunger. Hinge Roller Lever Models 4.8 dia. × 3.2 14.5 A (see note 2) SS-10GL2 SS-5GL2(-F) t = 0.3 (see note 1) SS-01GL2(-F, -E) FP OP +0.075 2.35 −0.05 dia. 10.2 9.5 2.9 2.5 6.4 +0.075 2.5±0.07 dia. 2.35 −0.05 dia. holes Three, 1.6 dia. 3.2 1.6 6.4 8.8 7.3 1. Stainless-steel spring lever Note: 5.1 9.5±0.1 2. Polyacetal resin roller 19.8 Model SS-10GL2 SS-5GL2 SS-5GL2-F SS-01GL2-E SS-01GL2 SS-01GL2-F OF max. 0.49 N {50 gf} 0.49 N {50 gf} 0.16 N {16 gf} 0.08 N {8 gf} RF min. 0.06 N {6 gf} 0.06 N {6 gf} 0.02 N {2 gf} 0.01 N {1 gf} (reference value) OT min. 1.0 mm 1.2 mm 1.2 mm 1.2 mm MD max. 1.0 mm 0.8 mm 0.8 mm 0.8 mm FP max. 19.3 mm OP 14.5±0.8 mm Note: The values indicated in parentheses are reference values for cases when the installation direction is such that the lever weight is not applied to the plunger. 8 SS SS Precautions Refer to General Information. ■ Cautions Terminal Connection Using Micro Loads When soldering the lead wire to the terminal, first insert the lead Using a model for ordinary loads to open or close the contact of a wire conductor through the terminal hole and then conduct sol- micro load circuit may result in faulty contact. Use models that dering. operate in the following range. However, even when using micro load models within the operating range shown below, if inrush Make sure that the capacity of the soldering iron is 60 W maxi- current occurs when the contact is opened or closed, it may mum. Do not take more than 350°C for the temperature at the tip increase contact wear and so decrease durability. Therefore, of the soldering iron. Do not take more than 5 s to solder the insert a contact protection circuit where necessary. switch terminal. Improper soldering involving an excessively high temperature or excessive soldering time may deteriorate the char- The minimum applicable load is the N-level reference value. This acteristics of the Switch. value indicates the malfunction reference level for the reliability –6 Be sure to apply only the minimum required amount of flux. The level of 60% (λ 60). The equation, λ 60 = 0.5×10 /operations Switch may have contact failures if flux intrudes into the interior of indicates that the estimated malfunction rate is less than 1/ the Switch. 2,000,000 operations with a reliability level of 60%. Use the following lead wires to connect to the solder terminals. Model Conductor size 2 SS-5 0.5 to 0.75 mm 2 SS-10 0.75 mm If the PCB terminal models are soldered in the solder bath, flux will permeate inside the Switch and cause contact failure. There- Operating range Operating for micro load range for fore, manually solder the PCB terminal. models SS-01 general-load models Wire the quick-connect terminals (#110) with receptacles. Insert SS-5, SS-10 the terminals straight into the receptacles. Do not impose exces- sive force on the terminal in the horizontal direction, otherwise the Inoperable terminal may be deformed or the housing may be damaged. range Insulation Distance According to EN61058-1, the minimum insulation thickness for this Switch should be 1.1 mm and minimum clearance distance between the terminal and mounting plate should be 1.6 mm. If the Current (mA) insulation distance cannot be provided in the product incorporat- ing the Switch, either use a Switch with insulation barrier or use a ■ Separators Separator to ensure sufficient insulation distance. Refer to Sepa- rator. Applicable Thickness (mm) Model (see note) Switch ■ Correct Use SS, D2S, D2SW 0.18 Separator for SS0.18 Mounting 0.4 Separator for SS0.4 Turn OFF the power supply before mounting or removing the Switch, wiring, or performing maintenance or inspection. Failure Separator for SS@ to do so may result in electric shock or burning. Use M2.3 mounting screws with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}. Mount the Switch onto a flat surface. Mounting on an uneven sur- face may cause deformation of the Switch, resulting in faulty oper- ation or breakage in the housing. Separator Operating Stroke Setting Note: The material is EAVTC (Epoxide Alkyd Varnished Tetron Cloth) and its heat-resisting temperature is 130°C. Take particular care in setting the operating stroke for the pin plunger models. Make sure that the operating stroke is 70% to 100% of the rated OT distance. Do not operate the actuator ■ Connector exceeding the OT distance, otherwise the durability of the Switch may be shortened. Refer to Terminal Connectors. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. B032-E1-12 9 Voltage (V)