OCTAGON SYSTEMS 3716
Specifications
ADDRESSING & INTERRUPTS
Jumper–selectable base addresses of 100h, 110h, 120h, 130h, 140h, 150h, 160h, or 170h. Interrupts 3 through 7 can be selected via jumpers to indicate end of analog conversion
ANALOG I/O
When driving opto modules, the output can sink 15 mA at 1.0V
CONNECTORS
Two male 26–position, straight I/O connectors, Mates with Octagon CMA–26 cable, for direct connection to opto modules or termination blocks, One LED for each connector, to show when that connector is accessed
ENVIRONMENTAL & POWER
–40° to 70° C operating, –50° to 85° C nonoperating, 5% to 95%, RH, noncondensing) Size 4.5" x 4.9", Micro PC form factor, Power: 5V ± 5% at 270 mA typical, 300 mA
I/O
48 lines of TTL digital I/O, Input low: –0.3V to +0.8V, Input high: 2V to Vcc, Output low: 0.45V maximum, Output high: 2.4V minimum, In output mode, can sink 2.5 mA at 0.4V and can source over 2.5 mA at 2.4V, Jumper block pulls all lines per connector (24 lines) high or low with a 22 KO resistor
Features
- 48 digital or analog I/O lines
- High voltage/current AC/DC
- Opto 22 & Grayhill compatible
- Thermocouples, RTDs, etc.
Datasheet
Octagon Systems=3716=datasheetq-256009308.pdf
359 KiB
Extracted Text
Analog/digital I/O for Micro PC expansion The 5648 provides 48 channels of analog or digital I/O. All 48 channels can be used for TTL digital I/O. Twenty–four of the channels can be used for analog I/O instead of digital I/O. The digital I/O lines are TTL com- patible, and are implemented with an Intel 82C55 chip. These lines will interface with logic devices, switch inputs, LEDs, and industry–standard opto module racks. The 48 lines are grouped into six ports of eight lines each. Four of those ports can be programmed as inputs or outputs on a port–wide basis. Two of the ports can be Octagon products are designed and programmed as four lines of inputs and four lines of out- manufactured under the supervision of an ISO 9001–2000 certified puts. Octagon has a variety of opto modules and termi- quality management system. nation boards for easy access for field wiring. The 24 analog lines are compatible with Grayhill G5 Micro PC cards plug into any ISA expansion slot or modules. The G5 input modules produce a frequency Micro PC card cage. The Octagon family of Micro PC output that is directly proportional to the input. A cus- controllers, expansion cards, and card cages provide a tom ASIC on the 5648 converts the frequency to a complete solution for applications in transportation, 0–4095 count. The commands from the CPU card select security, military, communications, distributed control, the channel and start the conversion. The ASIC gener- point–of–sale, ticketing machines, weighing equipment, ates an interrupt on the completion of the conversion. and other similar applications. The maximum conversion time is 625 μS. The 5648 will withstand high shock and vibration, and The analog modules accept thermocouples, current operates in temperature ranges from –40° to +70° C. loop, RTD and voltage inputs. Output modules include This rugged expansion card will provide years of reli- voltage and current outputs. The ASIC measures the fre- able service in the most challenging environments. quency, eliminating processor overhead. The system will Octagon offers a wide range of terminal blocks and opto detect incorrect polarity, out–of–range signal, and miss- racks to assist you in configuring a system that best suits ing or defective module conditions. your application. 11 6510 W. 91st Avenue • Westminster CO 80031 • 303–430–1500 www.octagonsystems.com ADDRESSING & INTERRUPTS: Features I/O: � Jumper–selectable base addresses of 100h, 110h, � 48 lines of TTL digital I/O 120h, 130h, 140h, 150h, 160h, or 170h. � Input low: –0.3V to +0.8V � Interrupts 3 through 7 can be selected via jumpers to indicate end of analog conversion � Input high: 2V to Vcc � Output low: 0.45V maximum � Output high: 2.4V minimum ENVIRONMENTAL & POWER: � –40° to 70° C operating � In output mode, can sink 2.5 mA at 0.4V and can source over 2.5 mA at 2.4V � –50° to 85° C nonoperating � Jumper block pulls all lines per connector (24 lines) � 5% to 95%, RH, noncondensing) high or low with a 22 KΩ resistor � Size 4.5" x 4.9", Micro PC form factor � Power: 5V ± 5% at 270 mA typical, 300 mA ANALOG I/O: maximum � When driving opto modules, the output can sink 15 mA at 1.0V ORDERING INFORMATION #3716 5648 analog/digital I/O card CONNECTORS: � Two male 26–position, straight I/O connectors � Mates with Octagon CMA–26 cable, for direct connection to opto modules or termination blocks � One LED for each connector, to show when that connector is accessed 22 6510 W. 91st Avenue • Westminster CO 80031 • 303–430–1500 6510 W. 91st Avenue • Westminster CO 80031 • 303-430-1500 www.octagonsystems.com www.octagonsystems.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 3716 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Octagon Systems 3116 Communication Board - 5540 multifunction card, It is a low-power Micro PC expan...
Octagon Systems 3181 Digital I/O - analog & digital I/O card, provides a versatile platform for mixe...
Octagon Systems 3336 Digital I/O - 5600–48 digital I/O card, The 5600 is a low–power Micro PC expans...
Octagon Systems 3579 Serial I/O - 5558 Octal serial card, require intensive serial communications, s...
Octagon Systems 3584 Serial I/O - 5554 Quad serial card, Micro PC cards plug into any ISA expansion ...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods