DN-3198:A1 D-120 LCD-80 Liquid Crystal Display Annunciator Control Systems General The LCD-80 is an 80-character, backlit LCD display annunciator for the NOTIFIER NFS2-640, NFS2-3030, NFS-320 fire alarm control panels, or the NCA-2 network control annunciator. Up to 32 LCD-80s may be connected onto the two-wire EIA-485 port. The LCD-80 has two basic modes of operation, “Terminal” and “ACS” mode. NOTE: The LCD-80 can also be used with Legacy panels. Please refer to the LCD-80 manual for more information. Common Features Listed to UL Standard 864, Ninth Edition 80-character backlit Liquid Crystal Display (20 characters x 4 lines). Control switches for System Acknowledge, Signal Silence and System Reset. Time and date display field. Enable Key switch option. Can be remotely located up to 6,000 ft. (1828.8 m) from the LCD-80 with ABF-1B control panel. Local piezo sounder with alarm/trouble resound. NFS2-3030 and NCA-2 firmware version 14.0 and higher Flush/surface/panel mount option. supports LCD-80 in terminal mode. LCD-80 is 8.25" (20.96 cm) high, 4.375" (11.11 cm) wide, ACS Mode and 1.75" (4.45 cm) deep. When operated in “ACS” mode, the LCD-80 provides vectoredUp to LCD-80s may be used on one EIA-485 circuit. annunciation capability. Individual devices/zones can be NOTE: Must have sufficient regulated 24 volt power. Certain installer-defined to only display at specific locations NOTIFIER systems may have limits to the amount of LCD-80s with ACK/STEP, Signal Silence, and Reset switches. EXAMPLE: A maintenance office receives only non-alarm point activations. These inputs could be sump pump on, high water, LCD-80 mounts with any CHS-4 chassis slot. backup AHU on, low temperature in freezer, etc. Up to 32 LCD-80s may be used in a continuous 4-wire loop Alarm/trouble count. (verify sufficient 24 VDC available). Custom “normal” message.Each may have ACK/STEP, SIGNAL SILENCE, and SYS- European option: first alarm/last alarm/alarm count. TEM RESET switches. Field-programmable messages from CRT or PC-compatibleDisplays all analog, addressable points. computer (PK-LCD80 Programming Kit required).No programming required for LCD-80s. EIA-485 interface: up to 32 per system. Printer output port: EIA-232, compatible with PRN Series The ABF-1DB Backbox printers. The ABF-1DB is a semi-flush-mount backbox Field-programmable messages in nonvolatile memory in two for the NOTIFIER LCD-80 Series Annunciator. options: 128 points, 40 character labels; or 256 points, 20 The ABF-1DB mounts one LCD-80. It includes character labels. an attractive smoked-glass door with NOTIFIER Internal nonvolatile clock for time and date in ACS mode. keylock. Dimensions, BOX only: 9.938" (25.24 cm) Terminal Mode high, 4.625" (11.75 cm) wide, 2.5" (6.35 cm) deep. In “Terminal” mode, the LCD-80 mimics the NFS2-640, NFS2- 3030, NFS-320, and NCA-2 displays. Up to 32 LCD-80s can Dimensions, DOOR only: 10.713" (27.21 cm) high, 6.0" (15.24 annunciate and provide remote reset, acknowledge, and silence cm) wide, 0.75" (1.9 cm) deep. of the control panel from remote locations. Displays device type identifiers. Related Options Device and zone custom alpha labels. PK-LCD80 (only available for download): Off-Line Program- Time/date and Device address. ming Kit for LCD-80. Allows PC programming messages when LCD-80 is used in the ACS mode.May operate in addition to CRT. No programming necessary. LCD-80 displays time, date, and ABF-1DB: Semi-flush box with alternative smoked-glass door, custom messages received from the panel or network annun- any keylock. ciator ADP-4B: Annunciator Dress Plate, black. Allows panel mount- ing of up to four LCD-80 modules in a CAB-4 Series cabinet. DN-3198:A1 • 04/05/2010 — Page 1 of 2 3198lcd8.jpg ABF-1B: Annunciator Flush Box, 9.938" (25.24 cm) high, 4.625" Agency Listings and Approvals (11.75 cm) wide, and 2.5" (6.35 cm) deep. Order AKS-1B key These listings and approvals apply to the modules specified in switch if desired. Can also be mounted in ABF-2B or ABF-4B this document. In some cases, certain modules or applications annunciator backboxes. may not be listed by certain approval agencies, or listing may be ABS-1TB: Deep Surface Backbox (mounts one LCD-80). in process. Consult factory for latest listing status. AKS-1B: Key Switch (black) to enable/disable controls when UL Listed: S635 mounted in ABF or ABS-1TB. ULC Listed: S635 PRN-6: 80-Column Serial Printer (see PRN data sheet). MEA: 345-02-E; 317-01-E (NFS-640); 128-07-E FDNY: COA#6026, 6038 CSFM: 7120-0028:156 •FM Approved The LCD-80 in ACS Mode NFS-320, NFS2-640, NFS2-3030, or NCA-2 connecting to LCD-80 The LCD-80 in Terminal Mode NFS-320, NFS2-640, NFS2-3030, or NCA-2connecting to LCD-80 Notifier® is a registered trademark of Honeywell International Inc. ©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Made in the U.S. A. For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118. www.notifier.com Page 2 of 2 — DN-3198:A1 04/05/2010