+1-972-234-4343 info@voxtechnologies.com VXI-5410C-89 Synchro/Resolver Measurement and Simulation • 0.0083° measurement accuracy • 0.0055° stimulus accuracy • Autoranging measurement • Programmable rotation • External or internal trigger • High-speed data transfer • Transformer isolation GENERAL The model 5410C-89 provides three synchro/resolver -to-digital and three digital-to-synchro/resolver channels with wrap-around self-test and the ability to rotate within a message-based VXI compatible size "C" card. Static angles and various rotational speeds can be independently selected for each angle. Synchro or resolver format can be selected via the bus. This unit automatically senses and adjusts to any line-to-line and reference voltage by auto-ranging the input from 3.5-100V and the reference from 5-115V. A confidence test command will cause relays to disconnect the D/S outputs from the outside and to connect them to the internal S/D. The microprocessor will then program a series of D/S angles that will be verified by the S/D converter. This test will be completed within 1 minute and will provide 95% fault detection to the module level. Vox Technologies Corporation - 1180 Commerce Drive, Richardson, Texas 75081 - www.voxtechnologies.com Telephone: +1-972-234-4343 - Fax: +1-972-234-4295 - Email: info@voxtechnologies.com +1-972-234-4343 info@voxtechnologies.com SPECIFICATIONS MEASUREMENT CHANNELS Number of Channels Three (channels 0-2) Resolution 0.001° Accuracy 0.0083° Input Format Synchro or Resolver Input Voltage 3.5-100 V , autoranging L-L Tracking Speed 180°/sec. max. Input Impedance 100 kW minimum Auto Phase Correction ±60° Settling Time 2 seconds Reference Voltage 5-115 V , autoranging rms Reference Current 3.0 mA max total Reference Frequency 360 Hz to 5 kHz Trigger Rotation can be initiated externally through the front panel connector or via the trigger bus. Differential Input. SIMULATION CHANNELS Number of Channels Three (channels 3-5) Resolution 16 bits Accuracy 0.0055° No Load 0.01° Full Load Output Format See Part Number Designation Output Voltage See Part Number Designation Reference Voltage See Part Number Designation Reference Current 3.0 mA max total Reference Frequency 360 Hz to 5 kHz GENERAL Interface VXIbus Native (MATE/CIIL). Meets IEEE-488.2 VXIbus Data Rate 500 kbyte/sec. VXIbus Conversion Rate 5 ms per string message Operating Temperature -10°C to +65°C Storage Temperature -40°C to +85°C Relative humidity to 90% RH Shock Designed to meet 15G, 11 ms Vibration Designed to meet MIL-T-28800C for class V equipment. Operating Altitude 10,000 feet Non-operating Altitude 40,000 feet Power Requirements: +24 Vdc 100 mA +12 Vdc 200 mA +5 Vdc 1.2 A Size VXIbus C-size standard, single slot Weight 4 lbs. Vox Technologies Corporation - 1180 Commerce Drive, Richardson, Texas 75081 - www.voxtechnologies.com Telephone: +1-972-234-4343 - Fax: +1-972-234-4295 - Email: info@voxtechnologies.com +1-972-234-4343 info@voxtechnologies.com Acoustic noise None Max. corrective time 0.5 hours. No preventive maintenance is required. Calibration intervals 1 year Connectors All connections are via front panel Male "D" connectors. Mating connectors not supplied. Cooling 15 cfm at .12" PART NUMBER DESIGNATION OUTPUT CH. 3 CH. 4 CH. 5 Ref Freq Load MODEL # FORMAT (VL-L) (VL-L) (VL-L) (Vrms) (Hz) ( min) 5410C-89-1 Synchro/Resolver 11.8/11.8 11.8/11.8 11.8/11.8 26 360-5000 20 kW 5410C-89-4 Resolver 3.5 3.5 3.5 7.0 5000 1 kW 5410C-89-5 Synchro 90 90 90 115 400 100 kW 5410C-89-7 Resolver 7.0 7.0 7.0 7.0 360-7500 2 kW NOTE: Synchro/Resolver format indicates that the outputs are programmable for either synchro or resolver. Vox Technologies Corporation - 1180 Commerce Drive, Richardson, Texas 75081 - www.voxtechnologies.com Telephone: +1-972-234-4343 - Fax: +1-972-234-4295 - Email: info@voxtechnologies.com