Elite.Parts

Description

Nexcom PEAK 735VL2G CPU Board - Series Full-Size Socket 478 Intel® Pentium® 4/800 MHz FSB Single Board Computer w/VGA | SATA | USB2.0 x 2 | DDR SDRAM | Single on-board LAN

Part Number

PEAK735VL(LF)

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

CPU CARDS » PICMG BOARDS

Specifications

BIOS

Award System BIOS Plug & Play support Advanced Power Management support ACPI (Advanced Confi guration &Power Interface) support 4 Mbit fl ash ROM

Certifications

CE approval FCC Class A

Chipset

Intel® 865GV (GMCH) (Intel® 865G for RoHS Version) Intel® ICH5 (I/O controller Hub)

CPU

Intel® Pentium® 4 or Celeron® (D) processor in the mPGA478 package FSB: 800/533/400MHz CPU support up to 3.4GHZ (Intel Desktop Processor) and Up to 3.0GHZ (Intel Embedded Processor) Supports Hyper- Threading technology

Dimensions

338.58 mm (L) x 122 mm (W) (13.3” x 4.8”)

Display Interface

Intel® 865GV (GMCH) chipset with integrated graphics controller Hardware motion compensation assist for software MPEG/DVD decoding Access system memory 1 x 15-pin CRT connector

Ethernet

Intel® 82547EI Gigabit Ethernet controller (dedicated by CSA port directly from the Intel® 865GV GMCH) and 1 x Intel® 82551QM 10/100 Ethernet controller for PEAK 735VL2G Single Intel® 82551QM 10/100 Fast Ethernet controller for PEAK 735VL Compliant

HyperTransport™ Technology

ITE 8888F x 1 PCI to ISA Bridge Provides 64 mA high driving capability to maximize ISA signals and supports up to 20 ISA cards on the backplane ISA Slot

I/O

2 x On-board USB port, USB 2.0 compliant Ultra ATA 100/66/33 support, 2 x 40-pin connector, 2-pin power connector for DOM (Disk On Module) Serial ATA support, 2 x SATA connector, data transfer bandwidth up to 150 MB/s ITE 8712F-A Super I/O 2 x SI

Memory

2 x 184-pin DIMM, supports DDR 266/333/400 memory up to 2 GB Dual 64-bit DDR channels, 3.2 GB/s bandwidth per channel Supports un-buffered and non-ECC DIMMs only

Operating Temperature

Board level operating temperature: 0°C to 60°C Storage temperature: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)

Power Consumption

CPU : 3.0 GHz +12 V: 6.5 A +5 V: 5.4 A +3.3 V: 0.5 A +5 Vsb: 0.5 A CPU : 2.4 GHz +12 V: 4.5 A +5 V: 4 A +3.3 V: 0.5 A +5 Vsb: 0.5 A

RTC

On-chip RTC with battery back up 1 x External Li Battery

System Monitor

Derived from Super I/O ITE 8712F-A to support system monitor. 8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb) 2 fan speed (one is for CPU, one is for system) 2 temperature (one is for internal CPU, one is for external sys

Watchdog Timer

Watchdog timeout can be programmed by software from 1, 2, 4, 8, 16,32,…...256 seconds

Features

2 x 184-pin DIMM, supports DDR 266/333/400 SDRAM Memory up to 2 GB
2 x Serial ATA Ports
2 x USB 2.0 Ports
Intel® 82547EI GbE controller & Intel® 82551 QM Fast Ethernet Controller
Intel® 865GV/ICH5 Chipset
Socket 478 for Intel® Pentium® 4 Processor up to 3.2 GHz with 400/533/800 MHz FSB

Datasheet

PEAK735VL2-271597190G.pdf

1062 KiB

Download

Extracted Text

® ® Intel Socket 478 Pentium 4 Processors PEAK 735VL2G up to 3.2 GHz 400/ 533/ 800 MHz FSB ® ® Socket 478 for Intel Pentium 4 DDR2, Max 4 GB ATX 5 Vsb USB 2.0 port x 2 IDE1 IDE2 FDD PIO VGA ® ® Intel Intel 82551 10/100 Ethernet Controller Ethernet Controller Dual LAN ® Intel 82547 Gigabit Ethernet Controller ® Intel 865GV Chipset ICH5 SATA x 2 External KB Main Features Main Features ® ® ® ® Socket 478 for Intel Pentium 4 Processor up to 3.2 GHz with Intel 82547EI GbE controller & Intel 82551 QM Fast Ethernet 400/533/800 MHz FSB Controller ® Intel 865GV/ICH5 Chipset 2 x Serial ATA Ports 2 x 184-pin DIMM, supports DDR 266/333/400 SDRAM Memory up 2 x USB 2.0 Ports to 2 GB Product Overview ® ® ® The PEAK 735VL2G Series is a full-size SBC featuring socket 478 Intel Pentium 4 processors with 400 MHz FSB. The PEAK 735VL2G incorporates an Intel 865GV (GMCH)/ICH5 chipset that supports un-buffered non-ECC DDR 266/333/400 MHz memory up to 2 GB maximum, an integrated graphic controller with shared 64 MB memory, LVDS LCD and dual display support. The South Bridge featuring ICH5 chipset which manages two SATA, Ultra ATA 100, parallel, ﬂ oppy ports, and other versatile I/O ports such as two serial ports, two USB ports, dual LAN ports, an audio interface, and more. The PEAK 735VL2G Series utilize high performance Pentium 4 processor and dual display to meet most of demanding industrial applications. Speciﬁ cations CPU Support On-board LAN ® ® ® ® Intel Pentium 4 or Celeron (D) processor in the mPGA478 package Intel 82547EI Gigabit Ethernet controller (dedicated by CSA port directly from ® ® the Intel 865GV GMCH) and 1 x Intel 82551QM 10/100 Ethernet controller for FSB: 800/533/400MHz PEAK 735VL2G CPU support up to 3.4GHZ (Intel Desktop Processor) and Up to 3.0GHZ (Intel ® Single Intel 82551QM 10/100 Fast Ethernet controller for PEAK 735VL Embedded Processor) Supports Hyper- Threading technology Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3y, IEEE 802.3ab 2 x RJ45 with LED Main Memory Display 2 x 184-pin DIMM, supports DDR 266/333/400 memory up to 2 GB ® Dual 64-bit DDR channels, 3.2 GB/s bandwidth per channel Intel 865GV (GMCH) chipset with integrated graphics controller Hardware motion compensation assist for software MPEG/DVD decoding Supports un-buffered and non-ECC DIMMs only Access system memory Chipset 1 x 15-pin CRT connector ® ® Intel 865GV (GMCH) (Intel 865G for RoHS Version) ® I/O Interface Intel ICH5 (I/O controller Hub) 2 x On-board USB port, USB 2.0 compliant BIOS Ultra ATA 100/66/33 support, 2 x 40-pin connector, 2-pin power connector for DOM (Disk On Module) Award System BIOS Plug & Play support Serial ATA support, 2 x SATA connector, data transfer bandwidth up to 150 MB/s Advanced Power Management support ITE 8712F-A Super I/O ACPI (Advanced Confi guration &Power Interface) support 2 x SIO , with 16C550 UARTs, 10-pin header 4 Mbit ﬂ ash ROM 1 x PIO, bi-directional, EPP/ECP support, 26-pin connector Floppy disk controller: 1 x 34-pin connector PICMG 1.0 Block Diagram 1 x 6-pin mini DIN connector , for PS/2 Keyboard/Mouse, 1 x 5-pin connector +3.3 V: 0.5 A (for external keyboard) +5 Vsb: 0.5 A 1 x On-board buzzer CPU : 2.4 GHz GPIO (4 in, 4 out) +12 V: 4.5 A 1 x On-board 2-pin header for I2C +5 V: 4 A 1 x On-board 5-pin header for IrDA +3.3 V: 0.5 A On-board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock, 2-pin +5 Vsb: 0.5 A for IDE active LED, 2-pin ATX power SW Dimensions One 3-pin power header for 3-pin power cable connect to backplane board to support ATX power on function. 338.58 mm (L) x 122 mm (W) (13.3” x 4.8”) On-board 4-pin additional power source input Environment Watchdog Timer Board level operating temperature: 0°C to 60°C Watchdog timeout can be programmed by software from 1, 2, 4, 8, 16, Storage temperature: -20°C to 80°C 32,…...256 seconds Relative humidity: 10% to 90% (Non-condensing) On-board RTC Certifications On-chip RTC with battery back up CE approval 1 x External Li Battery FCC Class A ISA Support Ordering Information ITE 8888F x 1 PCI to ISA Bridge Provides 64 mA high driving capability to maximize ISA signals and supports up PEAK 735VL2G(LF) (P/N: 10P0735VL05x0) RoHS Compliant ® ® to 20 ISA cards on the backplane ISA Slot Full-Size Socket 478 Intel Pentium 4/800 MHz FSB SBC w/dual LAN ® ® (Intel 82547EI Gigabit LAN + Intel 82551QM 10/100 LAN) System Monitor PEAK 735VL(LF) (P/N: 10P0735VL03x0) RoHS Compliant ® ® Derived from Super I/O ITE 8712F-A to support system monitor. Full-Size Socket 478 Intel Pentium 4/800 MHz FSB SBC w/single 10/100 LAN ® 8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb) (Intel 82551QM) 2 fan speed (one is for CPU, one is for system) 2 temperature (one is for internal CPU, one is for external system) 2 temperature sensor (one is for internal CPU, one is for external system) Power Requirements CPU : 3.0 GHz +12 V: 6.5 A +5 V: 5.4 A PICMG 1.0 We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products